Implementing Mesoporosity in Zeolitic Imidazolate Frameworks through Clip-Off Chemistry in Heterometallic Iron-Zinc ZIF-8.

Bond breaking has emerged as a new tool to postsynthetically modify the pore structure in metal-organic frameworks since it allows us to obtain pore environments in structures that are inaccessible by other techniques. Here, we extend the concept of clip-off chemistry to archetypical ZIF-8, taking advantage of the different stabilities of the bonds between imidazolate and Zn and Fe metal atoms in heterometallic Fe-Zn-ZIF-8. We demonstrate that Fe centers can be removed selectively without affecting the backbone of the structure that is supported by the Zn atoms. This allows us to create mesopores within the highly stable ZIF-8 structure. The strategy presented, combined with control of the amount of iron centers incorporated into the structure, permits porosity engineering of ZIF materials and opens a new avenue for designing novel hierarchical porous frameworks.

Investigation of Charge-Ordered Barium Iron Fluorides with One-Dimensional Structural Diversity and Complex Magnetic Interactions.

Three mixed-valence barium iron fluorides, Ba7Fe7F34, Ba2Fe2F9, and BaFe2F7, were prepared through hydrothermal redox reactions. The characteristic structures of these compounds feature diverse distributions of FeIIF6 octahedra and FeIIIF6 groups. Ba7Fe7F34 contained one-dimensional infinite ∞[FeIIFeIII6F34]14- double chains, comprising cis corner-sharing octahedra along the b direction; Ba2Fe2F9 contained one-dimensional ∞[Fe2F9]4- double chains, consisting of cis corner-sharing octahedra along the chain (a-axis direction) and trans corner-sharing octahedra vertical to the chain, while BaFe2F7 revealed three-dimensional (3D) frameworks that consist of isolated edge-sharing dinuclear FeII2F10 units linked via corners by FeIIIF6 octahedra. Magnetization and Mössbauer spectroscopy measurements revealed that Ba7Fe7F34 exhibits an antiferromagnetic phase transition at ∼11 K, where ferrimagnetic ∞[FeIIFeIII6F34]14- double chains are arranged in a paralleling manner, while Ba2Fe2F9 shows canted antiferromagnetic ordering at ∼32.5 K, leading to noncollinear spin ordering.

The Conformation of the N-Terminal Tails of Deinococcus grandis Dps Is Modulated by the Ionic Strength.

DNA-binding proteins from starved cells (Dps) are homododecameric nanocages, with N- and C-terminal tail extensions of variable length and amino acid composition. They accumulate iron in the form of a ferrihydrite mineral core and are capable of binding to and compacting DNA, forming low- and high-order condensates. This dual activity is designed to protect DNA from oxidative stress, resulting from Fenton chemistry or radiation exposure. In most Dps proteins, the DNA-binding properties stem from the N-terminal tail extensions. We explored the structural characteristics of a Dps from Deinococcus grandis that exhibits an atypically long N-terminal tail composed of 52 residues and probed the impact of the ionic strength on protein conformation using size exclusion chromatography, dynamic light scattering, synchrotron radiation circular dichroism and small-angle X-ray scattering. A novel high-spin ferrous iron-binding site was identified in the N-terminal tails, using Mössbauer spectroscopy. Our data reveals that the N-terminal tails are structurally dynamic and alter between compact and extended conformations, depending on the ionic strength of the buffer. This prompts the search for other physiologically relevant modulators of tail conformation and hints that the DNA-binding properties of Dps proteins may be affected by external factors.

Structural features and stability of apo- and holo-forms of a simple iron-sulfur protein.

Iron-sulfur centers are widespread in living organisms, mostly performing electron transfer functions, either in electron transfer chains or as part of multi-enzymatic complexes, while being also present in enzyme active sites, handling substrate catalysis. Rubredoxin is the simplest iron-sulfur containing protein constituted by a single polypeptide chain of 50 to 60 amino acids, of which four cysteine residues are responsible for metal binding in a tetrahedral coordination sphere. In this manuscript we explore the structure and stability of both apo- and holo-forms of a Rubredoxin from Marinobacter hydrocarbonoclasticus using Synchrotron Radiation Circular Dichroism (SRCD) in combination with other biochemical and spectroscopic techniques. The results are consistent with a holo-protein form containing a monomeric iron center with UV-visible maxima at 760, 578, 494, 386, 356 and 279 nm, an intense EPR resonance with a g value around 4.3 and Mössbauer spectroscopy parameters of δ equal to 0.69 mm/s and ΔEQ equal to 3.25 mm/s, for the ferrous reconstituted state. SRCD data, obtained for the first time for the apo-form, show a quite defined structure with ∆ε maximum at 191 nm and minima at 203 and 231 nm. Most significantly, the presence of isosbestic points at 189 and 228 nm made the interconversion between the two stable apo- and holo-form solution structures clear. SRCD temperature dependence data shows that for both forms the denaturation process proceeds through an intermediate species.

Fundamental Insights into the Covalent Silane Functionalization of NiFe Layered Double Hydroxides.

Layered double hydroxides (LDHs) are a class of 2D anionic materials exhibiting wide chemical versatility and promising applications in different fields, ranging from catalysis to energy storage and conversion. However, the covalent chemistry of this kind of 2D materials is still barely explored. Herein, the covalent functionalization with silanes of a magnetic NiFe-LDH is reported. The synthetic route consists of a topochemical approach followed by anion exchange reaction with surfactant molecules prior to covalent functionalization with the (3-aminopropyl)triethoxysilane (APTES) molecules. The functionalized NiFe-APTES was fully characterized by X-ray diffraction, infrared spectroscopy, electron microscopy, thermogravimetric analysis coupled with mass spectrometry and 29 Si solid-state nuclear magnetic resonance, among others. The effect on the electronic properties of the functionalized LDH was investigated by a magnetic study in combination with Mössbauer spectroscopy. Moreover, the reversibility of the silane-functionalization at basic pH was demonstrated, and the quality of the resulting LDH was proven by studying the electrochemical performance in the oxygen evolution reaction in basic media. Furthermore, the anion exchange capability for the NiFe-APTES was tested employing CrVI , resulting in an increase of 200 % of the anion retention. This report allows for a new degree of tunability of LDHs, opening the door to the synthesis of new hybrid architectures and materials.

[Co/Fe(α-Alkyl-tpdt)2]x-: Alkyl-Substituted Cobalt and Iron Bis-dithiolenethiophenic Complexes.

Tetraphenylphosphonium salts of Co and Fe complexes with alkyl-substituted, tert-butyl (tb), and isopropyl (dp) 2,3-thiophenedithiolate (α-tpdt) ligands, namely, TPP[Co(α-tb-tpdt)2] (3), TPP2[Fe(α-tb-tpdt)2]2 (4a-b), TPP[Co(α-dp-tpdt)2] (5), and TPP[Fe(α-dp-tpdt)2] (6) were prepared and characterized by cyclic voltammetry, single crystal X-ray diffraction, magnetic susceptibility measurements, and 57Fe Mössbauer spectroscopy. Compound 3 and 5 are isostructural with their Au and Ni analogues with a square-planar coordination geometry. Compound 4 presents two polymorphs (4a-b) both showing a Fe(III) bisdithiolene dimerization. The magnetic susceptibility of 3 and 5 exhibits behavior dominated by antiferromagnetic interactions, with room-temperature magnetic moments of 3.40 and 3.36 µB, respectively, indicating that these square-planar Co(III) complexes assume an intermediate spin electronic configuration (S = 1) as supported by multiconfigurational and DFT calculations.

Conducting Anilate-Based Mixed-Valence Fe(II)Fe(III) Coordination Polymer: Small-Polaron Hopping Model for Oxalate-Type Fe(II)Fe(III) 2D Networks.

The mixed-valence FeIIFeIII 2D coordination polymer formulated as [TAG][FeIIFeIII(ClCNAn)3]·(solvate) 1 (TAG = tris(amino)-guanidinium, ClCNAn2- = chlorocyanoanilate dianionic ligand) crystallized in the polar trigonal space group P3. In the solid-state structure, determined both at 150 and at 10 K, anionic 2D honeycomb layers [FeIIFeIII(ClCNAn)3]- establish in the ab plane, with an intralayer metal-metal distance of 7.860 Å, alternating with cationic layers of TAG. The similar Fe-O distances suggest electron delocalization and an average oxidation state of +2.5 for each Fe center. The cation imposes its C3 symmetry to the structure and engages in intermolecular N-H···Cl hydrogen bonding with the ligand. Magnetic susceptibility characterization indicates magnetic ordering below 4 K and the presence of a hysteresis loop at 2 K with a coercive field of 60 Oe. Mössbauer measurements are in agreement with the existence of Fe(+2.5) ions at RT and statistic charge localization at 10 K. The compound shows semiconducting behavior with the in-plane conductivity of 2 × 10-3 S/cm, 3 orders of magnitude higher than the perpendicular one. A small-polaron hopping model has been applied to a series of oxalate-type FeIIFeIII 2D coordination polymers, providing a clear explanation on the much higher conductivity of the anilate-based systems than the oxalate ones.

Synthesis and structural/physical properties of U3Fe2Ge7: a single-crystal study.

A single crystal of U3Fe2Ge7 was synthesized by the tin-flux method, and its structural and electronic properties were studied. The compound crystallizes in the orthorhombic crystal structure of La3Co2Sn7 type with two Wyckoff sites for the U atoms. U3Fe2Ge7 displays a ferromagnetic order below TC = 62 K. Magnetization measurements in static (up to 14 T) and pulsed (up to 60 T) magnetic fields revealed a strong two-ion uniaxial magnetic anisotropy. The easy magnetization direction is along the c axis and the spontaneous magnetic moment is 3.3 µB per formula unit at 2 K. The moment per Fe atom is 0.2 µB, as follows from Mössbauer spectroscopy. The magnetic moments are oriented perpendicular to the shortest inter-uranium distances that occur within the zigzag chains in the ab plane, contrary to other U-based isostructural compounds. The magnetization along the a axis reveals a first-order magnetization process that allows for a quantitative description of the magnetic anisotropy in spite of its enormous energetic strength. The strong anisotropy is reflected in the specific heat and electrical resistivity that are affected by a gap in magnon spectrum.

Thermal hysteresis in a spin-crossover Fe(III) quinolylsalicylaldimine complex, Fe(III)(5-Br-qsal)2Ni(dmit)2·solv: solvent effects.

The Fe(III) complexes Fe(5-Br-qsal)2Ni(dmit)2·solv with solv = CH2Cl2 (1) and (CH3)2CO (2) were synthesized, and their structural and magnetic properties were studied. While magnetization and Mössbauer spectroscopy data of 1 showed a gradual spin transition, compound 2 evidenced an abrupt transition with a thermal hysteresis of 13 K close to room temperature (T1/2 ↓ ∼273 K and T1/2 ↑ ∼286 K). A similar packing arrangement of segregated layers of cations and anions was found for 1 and 2. In both low-spin, LS, structures there are a large number of short intra- and interchain contacts. This number is lower in the high-spin, HS, phases, particularly in the case of 1. The significant loss of strong π-π interactions in the cationic chains and short contacts in the anionic chains in the HS structure of 1 leads to alternating strong and weak bonds between cations along the cationic chains and the formation of unconnected dimers along the anionic chains. This is consistent with a significant weakening of the extended interactions in 1. On the other hand, in the HS phase of 2 the 3D dimensionality of the short contacts observed in the LS phases is preserved. The effect of distinct solvent molecules on the intermolecular spacings explains the different spin crossover behaviors of the title compounds.

Stimuli responsive hybrid magnets: tuning the photoinduced spin-crossover in Fe(III) complexes inserted into layered magnets.

The insertion of a [Fe(sal2-trien)](+) complex cation into a 2D oxalate network in the presence of different solvents results in a family of hybrid magnets with coexistence of magnetic ordering and photoinduced spin-crossover (LIESST effect) in compounds [Fe(III)(sal2-trien)][Mn(II)Cr(III)(ox)3]·CHCl3 (1·CHCl3), [Fe(III)(sal2-trien)][Mn(II)Cr(III)(ox)3]·CHBr3 (1·CHBr3), and [Fe(III)(sal2-trien)][Mn(II)Cr(III)(ox)3]·CH2Br2 (1·CH2Br2). The three compounds crystallize in a 2D honeycomb anionic layer formed by Mn(II) and Cr(III) ions linked through oxalate ligands and a layer of [Fe(sal2-trien)](+) complexes and solvent molecules (CHCl3, CHBr3, or CH2Br2) intercalated between the 2D oxalate network. The magnetic properties and Mössbauer spectroscopy indicate that they undergo long-range ferromagnetic ordering at 5.6 K and a spin crossover of the intercalated [Fe(sal2-trien)](+) complexes at different temperatures T1/2. The three compounds present a LIESST effect with a relaxation temperature TLIESST inversely proportional to T1/2. The isostructural paramagnetic compound, [Fe(III)(sal2-trien)][Zn(II)Cr(III)(ox)3]·CH2Cl2 (2·CH2Cl2) was also prepared. This compound presents a partial spin crossover of the inserted Fe(III) complex as well as a LIESST effect. Finally, spectroscopic characterization of the Fe(III) doped compound [Ga0.99Fe0.01(sal2trien)][Mn(II)Cr(III)(ox)3]·CH2Cl2 (3·CH2Cl2) shows a gradual and complete thermal spin crossover and a LIESST effect on the isolated Fe(III) complexes. This result confirms that cooperativity is not a necessary condition to observe the LIESST effect in an Fe(III) compound.

[Fe(nsal2trien)]SCN, a new two-step iron(III) spin crossover compound, with symmetry breaking spin-state transition and an intermediate ordered state.

We report the synthesis of the iron(III) complex of the hexadentate Schiff base ligand nsal2trien obtained from the condensation of triethylenetetramine and 2 equiv. of 2-hydroxy-1-naphthaldehyde. The study of the salt [Fe(nsal2trien)]SCN (1) by magnetic susceptibility measurements and Mössbauer spectroscopy reveals a rather unique behavior that displays thermally induced spin crossover (SCO) with two well-separated steps at 250 (gradual transition) and 142 K (steep transition). Single crystal X-ray structures were obtained at 294, 150, and 50 K, for the high spin (HS), intermediate (Int), and low spin (LS) phases. The HS and LS phases are isostructural, and based on a single Fe(III) site (either HS or LS) an unusual symmetry break occurs in the transition to the Int ordered phase, where the unit cell includes two distinct Fe(III) sites and is based on a repetition of the [HS-LS] motif. The two-step SCO behavior of 1 must result from the existence of structural constraints preventing the full conversion HS ↔ LS in a single step.

Hybrid magnetic superconductors formed by TaS2 layers and spin crossover complexes.

The restacking of charged TaS2 nanosheets with molecular counterparts has so far allowed for the combination of superconductivity with a manifold of other molecule-intrinsic properties. Yet, a hybrid compound that blends superconductivity with spin crossover switching has still not been reported. Here we continue to exploit the solid-state/molecule-based hybrid approach for the synthesis of a layered TaS2-based material that hosts Fe(2+) complexes with a spin switching behavior. The chemical design and synthetic aspects of the exfoliation/restacking approach are discussed, highlighting how the material can be conveniently obtained in the form of highly oriented easy-to-handle flakes. Finally, proof of the presence of both phenomena is provided by the use of a variety of physical characterization techniques. The likely sensitivity of the intercalated Fe(2+) complexes to external stimuli such as light opens the door for the study of synergistic effects between the superconductivity and the spin crossover switching at low temperatures.

Two-dimensional magnetic behaviour in hybrid NiFe-layered double hydroxides by molecular engineering.

Layered double hydroxides (LDHs) are a class of two-dimensional (2D) anionic materials that exhibit remarkable chemical versatility, making them ideal building blocks in the design of complex multifunctional materials. In this line, a NiFe-LDH is probably one of the most important LDHs due to its interesting electrochemical and magnetic properties. However, no direct magnetic measurements of exfoliated NiFe-LDH nanosheets have been reported so far. Herein, we synthesize a hybrid NiFe-LDH family through anion exchange reactions using surfactant molecules in order to increase the interlayer space (ranging from 8 to 31.6 Å), minimizing the interlayer dipolar interactions. By intercalation with octadecylsulphate, we have managed to obtain the largest interlayer space reported for a NiFe-LDH while keeping a similar size, morphology and composition. This wide interlayer separation results in a decrease in temperatures at which spontaneous magnetization (TM) occurs and the blocking temperature (TB), as well as a decrease in the coercive fields (HC). In fact, an abrupt drop in all these magnetic parameters above 30 Å interlayer distance is observed, evidencing complete magnetic decoupling of the layers. We have further validated our molecular engineering approach by characterizing the hybrid materials by Mössbauer spectroscopy and comparing the magnetic analysis results with those for a liquid phase exfoliated NiFe-LDH sample. Overall, this work provides fundamental insights into the magnetism of NiFe-LDHs, showing the potential of molecular engineering for designing hybrid layered magnetic materials approaching the 2D magnetic limit.

Ultramicroporous iron-isonicotinate MOFs combining size-exclusion kinetics and thermodynamics for efficient CO2/N2 gas separation.

Two ultramicroporous 2D and 3D iron-based Metal-Organic Frameworks (MOFs) have been obtained by solvothermal synthesis using different ratios and concentrations of precursors. Their reduced pore space decorated with pendant pyridine from tangling isonicotinic ligands enables the combination of size-exclusion kinetic gas separation, due to their small pores, with thermodynamic separation, resulting from the interaction of the linker with CO2 molecules. This combined separation results in efficient materials for dynamic breakthrough gas separation with virtually infinite CO2/N2 selectivity in a wide operando range and with complete renewability at room temperature and ambient pressure.

Controlled modulation of the dynamics of the Deinococcus grandis Dps N-terminal tails by divalent metals.

DNA-binding proteins from starved cells (Dps) are small multifunctional nanocages expressed by prokaryotes in acute oxidative stress conditions or during the starvation-induced stationary phase, as a bacterial defense mechanism. Dps proteins protect bacterial DNA from damage by either direct binding or by removing precursors of reactive oxygen species from solution. The DNA-binding properties of most Dps proteins studied so far are related to their unordered, flexible, N- and C-terminal extensions. In a previous work, we revealed that the N-terminal tails of Deinoccocus grandis Dps shift from an extended to a compact conformation depending on the ionic strength of the buffer and detected a novel high-spin ferrous iron center in the proximal ends of those tails. In this work, we further explore the conformational dynamics of the protein by probing the effect of divalent metals binding to the tail by comparing the metal-binding properties of the wild-type protein with a binding site-impaired D34A variant using size exclusion chromatography, dynamic light scattering, synchrotron radiation circular dichroism, and small-angle X-ray scattering. The N-terminal ferrous species was also characterized by Mössbauer spectroscopy. The results herein presented reveal that the conformation of the N-terminal tails is altered upon metal binding in a gradual, reversible, and specific manner. These observations may point towards the existence of a regulatory process for the DNA-binding properties of Dps proteins through metal binding to their N- and/or C-terminal extensions.

Cubane-type Mo3FeS4(4+,5+) complexes containing outer diphosphane ligands: ligand substitution reactions, spectroscopic studies, and electronic structure.

A general protocol to access Mo(3)FeS(4)(4+) clusters selectively modified at the Fe coordination site is presented starting from the all-chlorine Mo(3)(FeCl)S(4)(dmpe)(3)Cl(3) (1) [dmpe = 1,2-bis(dimethylphosphane-ethane)] cluster and tetrabutylammonium salts (n-Bu(4)NX) (X = CN(-), N(3)(-), and PhS(-)). Clusters Mo(3)(FeX)S(4)(dmpe)(3)Cl(3) [X = CN(-) (2), N(3)(-) (3), and PhS(-) (4)] are prepared in high yield, and comparison of geometric and redox features upon modification of the coordination environment at the Fe site at parity of ligands at the Mo sites is also presented. The existence of the cubane-type Mo(3)FeS(4)(4+,5+) redox couple is demonstrated by cyclic voltammetry and for compound 1 by cluster synthesis and X-ray structure determinations. Ground states for the 1/1(+) redox couple are evaluated on the basis of magnetic susceptibility measurements, electron paramagnetic resonance, and (57)Fe Mössbauer spectroscopy aimed at providing an input of experimental data for electronic structure determination based on density functional theory calculations.

Exploiting the Redox Activity of MIL-100(Fe) Carrier Enables Prolonged Carvacrol Antimicrobial Activity.

The design of efficient food contact materials that maintain optimal levels of food safety is of paramount relevance to reduce the increasing number of foodborne illnesses. In this work, we develop a smart composite metal-organic framework (MOF)-based material that fosters a unique prolonged antibacterial activity. The composite is obtained by entrapping a natural food preserving molecule, carvacrol, into a mesoporous MIL-100(Fe) material following a direct and biocompatible impregnation method, and obtaining particularly high payloads. By exploiting the intrinsic redox nature of the MIL-100(Fe) material, it is possible to achieve a prolonged activity against Escherichia coli and Listeria innocua due to a triggered two-step carvacrol release from films containing the carvacrol@MOF composite. Essentially, it was discovered that based on the underlying chemical interaction between MIL-100(Fe) and carvacrol, it is possible to undergo a reversible charge-transfer process between the metallic MOF counterpart and carvacrol upon certain chemical stimuli. During this process, the preferred carvacrol binding site was monitored by infrared, Mössbauer, and electron paramagnetic resonance spectroscopies, and the results are supported by theoretical calculations.

Multifunctional magnetic materials obtained by insertion of spin-crossover Fe(III) complexes into chiral 3D bimetallic oxalate-based ferromagnets.

The syntheses, structures, and magnetic properties of compounds of formula [Fe(III)(5-Clsal(2)-trien)][Mn(II)Cr(III)(ox)(3)]·0.5(CH(3)NO(2)) (1), [Fe(III)(5-Brsal(2)-trien)][Mn(II)Cr(III)(ox)(3)] (2), and [In(III)(5-Clsal(2)-trien)][Mn(II)Cr(III)(ox)(3)] (3) are reported. The structure of the three compounds, which crystallize in the orthorhombic P2(1)2(1)2(1) chiral space group, presents a 3D chiral anionic network formed by Mn(II) and Cr(III) ions linked through oxalate ligands with inserted [Fe(III)(5-Clsal(2)-trien)](+), [Fe(III)(5-Brsal(2)-trien)](+), and [In(III)(5-Clsal(2)-trien)](+) cations. The magnetic properties indicate that the three compounds undergo long-range ferromagnetic ordering at ca. 5 K. On the other hand, the inserted Fe(III) cations undergo a partial spin crossover in the case of 1 and 2.

Temperature dependence of desolvation effects in hydrogen-bonded spin crossover complexes.

The synthesis, crystal structure and (photo)magnetic properties of the anhydrous spin crossover salt of formula [Fe(bpp)2](C6H8O4) (1) (bpp = 2,6-bis(pyrazol-3-yl)pyridine; C6H8O4 = adipate dianion), obtained by desolvation at 400 K of the original tetrahydrate in a single-crystal-to-single-crystal (SC-SC) transformation, are reported. This work offers a comparison between this compound and the previously reported hydrated material ([Fe(bpp)2](C6H8O4)·4H2O, 1·4H2O), highlighting the significance of the thermal conditions used in the dehydration-rehydration processes. In both compounds, a hydrogen-bonded network between iron(ii) complexes and adipate anions is observed. The original tetrahydrate (1·4H2O) is low-spin and desolvation at 450 K triggers a low-spin (LS) to high-spin (HS) transition to an amorphous phase that remains stable over the whole temperature range of study. Surprisingly, the dehydrated compound at 400 K (1) keeps the crystallinity, undergoes a partial spin crossover (T1/2 = 180 K) and a quantitative LS to HS photomagnetic conversion at low temperatures, with a T(LIESST) value of 61 K.

Multifunctional magnetic materials obtained by insertion of a spin-crossover Fe(III) complex into bimetallic oxalate-based ferromagnets.

The syntheses, structures and magnetic properties of the compounds of formula [Fe(III)(sal(2)-trien)][Mn(II)Cr(III)(ox)(3)].CH(2)Cl(2) (1; H(2)sal(2)-trien=N,N'-disalicylidenetriethylenetetramine, ox=oxalate), [Fe(III)(sal(2)-trien)][Mn(II)Cr(III)(ox)(3)].CH(3)OH (2), [In(III)(sal(2)-trien)][Mn(II)Cr(III)(ox)(3)].0.25H(2)O.0.25CH(3)OH.0.25CH(3)CN (3), and [In(III)(sal(2)-trien)][Mn(II)Cr(III)(ox)(3)].CH(3)NO(2).0.5H(2)O (4) are reported. The structure of 1 presents a 2D honeycomb anionic layer formed by Mn(II) and Cr(III) ions linked through oxalate ligands and a cationic layer of [Fe(sal(2)-trien)](+) complexes intercalated between the 2D oxalate network. The structures of 2, 3, and 4 present a 3D achiral anionic network formed by Mn(II) and Cr(III) ions linked through oxalate ligands with [Fe(sal(2)-trien)](+) or [In(sal(2)-trien)](+) complexes and solvent molecules intercalated within the 3D oxalate network. The magnetic properties and Mössbauer spectroscopy of 1 and 2 indicate that these compounds undergo a long-range ferromagnetic ordering at around 5 K and a spin crossover of the intercalated [Fe(sal(2)-trien)](+) complexes above 130 K, which is complete in the case of 1. The magnetic properties of the compounds 3 and 4 confirm the ferromagnetic ordering of the bimetallic oxalate network.