Optical Fiber Sensors: introduction to the feature issue.

This special issue contains a collection of papers on optical fiber sensors that were originally presented and published in a more succinct form in conjunction with the 27th International Conference on Optical Fiber Sensors (OFS) held in Alexandria, Virginia, United States, from 29th August to 2nd September, 2022.

Natural mineral fibers: conducting inhalation toxicology studies-part B: development of a nose-only exposure system for repeat-exposure in vivo study of Libby amphibole aerosol.

BACKGROUND: Exposure to asbestos is associated with malignant and nonmalignant respiratory disease. To strengthen the scientific basis for risk assessment on fibers, the National Institute of Environmental Health Sciences (NIEHS) has initiated a series of studies to address fundamental questions on the toxicology of naturally occurring asbestos and related mineral fibers after inhalation exposure. A prototype nose-only exposure system was previously developed and validated. The prototype system was expanded to a large-scale exposure system in this study for conducting subsequent in vivo rodent inhalation studies of Libby amphibole (LA) 2007, selected as a model fiber. RESULTS: The exposure system consisting of six exposure carousels was able to independently deliver stable LA 2007 aerosol to individual carousels at target concentrations of 0 (control group), 0.1, 0.3, 1, 3, or 10 mg/m3. A single aerosol generator was used to provide aerosol to all carousels to ensure that exposure atmospheres were chemically and physically similar, with aerosol concentration as the only major variable among the carousels. Transmission electron microscopy (TEM) coupled with energy dispersive spectrometry (EDS) and selected area electron diffraction (SAED) analysis of aerosol samples collected at the exposure ports indicated the fiber dimensions, chemical composition, and mineralogy were equivalent across exposure carousels and were comparable to the bulk LA 2007 material. CONCLUSION: The exposure system developed is ready for use in conducting nose-only inhalation toxicity studies of LA 2007 in rats. The exposure system is anticipated to have applicability for the inhalation toxicity evaluation of other natural mineral fibers of concern.

Natural mineral fibers: conducting inhalation toxicology studies - part A: Libby Amphibole aerosol generation and characterization method development.

BACKGROUND: Asbestos has been classified as a human carcinogen, and exposure may increase the risk of diseases associated with impaired respiratory function. As the range of health effects and airborne concentrations that result in health effects across asbestos-related natural mineral fiber types are not fully understood, the National Institute of Environmental Health Sciences has established a series of research studies to characterize hazards of natural mineral fibers after inhalation exposure. This paper presents the method development work of this research project. RESULTS: A prototype nose-only exposure system was fabricated to explore the feasibility of generating natural mineral fiber aerosol for in vivo inhalation toxicity studies. The prototype system consisted of a slide bar aerosol generator, a distribution/delivery system and an exposure carousel. Characterization tests conducted using Libby Amphibole 2007 (LA 2007) demonstrated the prototype system delivered stable and controllable aerosol concentration to the exposure carousel. Transmission electron microscopy (TEM) analysis of aerosol samples collected at the exposure port showed the average fiber length and width were comparable to the bulk LA 2007. TEM coupled with energy dispersive spectrometry (EDS) and selected area electron diffraction (SAED) analysis further confirmed fibers from the aerosol samples were consistent with the bulk LA 2007 chemically and physically. CONCLUSIONS: Characterization of the prototype system demonstrated feasibility of generating LA 2007 fiber aerosols appropriate for in vivo inhalation toxicity studies. The methods developed in this study are suitable to apply to a multiple-carousel exposure system for a rat inhalation toxicity testing using LA 2007.

[Diagnostic Efficacy of 68Ga-Labeled Prostate-Specific Membrane Antigen and 18F-Labeled Sodium Fluoride PET/CT in Prostate Cancer With Bone Metastasis].

Objective To compare the efficiency of 68Ga-labeled prostate-specific membrane antigen (68Ga-PSMA-11) and 18F-labeled sodium fluoride (18F-NaF) PET/CT in the diagnosis of bone metastasis in the patients with prostate cancer.Methods The prostate cancer patients suspected of bone metastasis who underwent 68Ga-PSMA-11 PET/CT and 18F-NaF PET/CT from January 2018 to January 2021 were included in this study.The number of lesions,maximum standardized uptake value (SUVmax),and tumor-to-background (T/B) ratio were compared between the two methods.Results 18F-NaF PET/CT detected more metastases than 68Ga-PSMA-11 PET/CT (310 vs.264,P<0.001).The median SUVmax[23.2 (16.4,33.4) vs.4.1 (2.5,5.6)] and median T/B ratio[7.0 (4.9,9.9) vs.6.7 (3.7,9.6)] of 18F-NaF PET/CT were higher than those of 68Ga-PSMA-11 PET/CT (all P<0.001).With the number of lesions as the indicator,the sensitivity,specificity,accuracy,positive predictive value,and negative predictive value of 18F-NaF PET/CT were 100.0%,92.0%,92.0%,98.7%,and 100.0% respectively,and those of 68Ga-PSMA-11 PET/CT were 85.2%,94.0%,79.2%,98.9%,and 50.5%,respectively.Conclusion 18F-NaF PET/CT is superior to 68Ga-PSMA-11 PET/CT in the detection of bone metastases of prostate cancer.

[Causes of False-Positive Results in 68Ga-Labeled Fibroblast Activation Protein Inhibitor PET/CT Imaging].

Objective To investigate the causes of false-positive results in the 68Ga-labeled fibroblast activation protein inhibitor (68Ga-FAPI-04) PET/CT imaging. Methods The imaging data of 547 patients undergoing 68Ga-FAPI-04 PET/CT examination in the Department of Nuclear Medicine of the Affiliated Hospital of Southwest Medical University from September 2020 to May 2021 were retrospectively collected.Two experienced nuclear medicine diagnostic physicians analyzed the clinical data,relevant imaging examinations,laboratory examinations,pathological results and follow-up results of the patients with false-positive results. Results The 68Ga-FAPI-04 PET/CT imaging of 547 patients showed false-positive results in 99 (18.1%) patients,including 56 males and 43 females.The postoperative pathological examination confirmed false-positive results in 13 patients,including 1 patient of thyroiditis,2 patients of pulmonary tuberculosis,1 patient of bone tuberculosis,2 patients of pulmonary inflammatory pseudotumor,1 patient of pulmonary sarcoidosis,1 patient of pulmonary benign fibroma,1 patient of organic pneumonia,2 patients of renal angiomyolipoma,1 patient of mass pancreatitis,and 1 patient of pancreatic mucinous cystadenoma.The medical history,relevant imaging examination,and long-term follow-up confirmed false-positive results in 86 patients.Specifically,the false-positive uptake in the neck,chest,abdomen,bone joint,and skin occurred in 8 (9.3%),13 (15.1%),5 (5.8%),57 (66.3%),and 3 (3.5%) patients,respectively.Inflammation-related uptake appeared in 83 (83.8%) patients with false-positive imaging results,of which arthritis (23 patients) and osteophyte (29 patients) were the most common.Sixteen (16.2%) patients showed the false-positive uptake related to fibroblasts. Conclusion 68Ga-FAPI-04 PET/CT imaging will show non-malignant tumor false-positive results,which are mainly associated with inflammation and fibroblasts.

Point-by-point inscribed sapphire parallel fiber Bragg gratings in a fully multimode system for multiplexed high-temperature sensing.

We study the point-by-point inscription of sapphire parallel fiber Bragg gratings (sapphire pFBGs) in a fully multimode system. A parallel FBG is shown to be critical in enabling detectable and reliable high-order grating signals. The impacts of modal volume, spatial coherence, and grating location on reflectivity are examined. Three cascaded seventh-order pFBGs are fabricated in one sapphire fiber for wavelength multiplexed temperature sensing. Using a low-cost, fully multimode 850-nm interrogator, reliable measurement up to 1500°C is demonstrated.

[Clinical Practice of 177Lu-DOTATATE in the Treatment of Neuroendocrine Tumors].

Most of the neuroendocrine tumors(NETs) overexpress the somatostatin receptor(SSTR),which provides a reliable target for SSTR-targeted peptide receptor radionuclide therapy(PRRT).Compared with drug therapy,PRRT has high objective response rate and significantly prolongs patients' survival.Moreover,the patients have good tolerance to this therapy.Considering that PRRT is in clinical trial phase in China,this article elaborates on the selection and preparation of patients,pre-treatment medications,administration methods,treatment cycles,side effects,follow-up plan,and the combination of PRRT with other drugs based on the published international guidelines in this field and our experience from clinical practice.Hoping that relevant professionals can well understand the principle of PRRT and apply it in clinical practice,we write this article to provide a basis for serving real-world patients and carrying out clinical trials.

Experimental investigation of point-by-point off-axis Bragg gratings inscribed by a femtosecond laser in few-mode fibers.

Off-axis Bragg gratings with varied horizontal and vertical distances off the center in a step-index two-mode fiber were fabricated by 800 nm infrared-femtosecond laser pulses through a point-by-point technique. In this article, we experimentally investigate these gratings via measuring the transmitted power and the reflected intensity profiles under different input polarization, with multiple characteristics reported for the first time to the best of our knowledge. To highlight, we find that the birefringence induced to the LP01 reaches its maximum magnitude at an intermediate offset, followed by the fast and slow axes switching at a further slightly increased offset. We also show that the peak reflectivity of the LP11 exhibits strong polarization dependence, with the much stronger peak reflectivity constantly corresponding to the polarization perpendicular to the damage-point-to-center line, whereas the peak reflectivity of the LP01 has almost no polarization dependence. Moreover, we report that the reflected mode patterns of the cross-coupling of the LP01 and LP11 are linked to the direction of linear polarization, through which one can selectively excite an arbitrarily oriented LP11 by merely altering the polarization.

High-temperature all-fiber non-destructive multi-parameter sensing system with consistent performance.

A high-temperature all-fiber non-destructive multi-parameter sensing system is developed. The system can operate consistently in a wide range of temperature changes by specially designed active signal generation and detection units. It is capable of monitoring temperature up to 600°C and cracks on metal pipes with an acoustic wave generation unit and an acoustic detection unit. A gold-coated multi-mode fiber is used to deliver a laser pulse for acoustic excitation while minimizing parasitic acoustic signals at high temperature. An in-fiber Fabry-Perot fiber Bragg grating (FP-FBG) is fabricated in another single-mode fiber and bonded to the test object for acoustic detection. The FP-FBG avoids strain redistribution inside the bonder at high temperature to ensure consistent operation. The feasibility of the system for temperature monitoring and crack detection in real-world applications is also demonstrated on an industry-standard P91 pipe.

Heat-induced drift reduction of time of flight in fused quartz acoustic waveguides via annealing process.

High temperature structural acoustic sensors play an important role in many applications. Fused quartz waveguide is a popular choice due to its resistance to harsh environments and its convenience of modification. However, time of flight between pulse and echo, which is widely used in these sensors, tends to encounter drifts in fast temperature changing process even after temperature returns to initial value. In this article, different annealing process are performed for a special modified fused quartz waveguide with a sensor node. Annealing treatment is found able to reduce the drift when the waveguide undergoes a sudden temperature spike to 1000 °C at 500 kHz operating acoustic frequency, and the best annealing condition could make the drift one magnitude smaller. A following temperature test up to 1000 °C shows consistent measurement readings.

Acoustic modal analysis of unique fused-silica fibers for passive non-destructive structural monitoring.

The goal of non-destructive acoustic sensing is to passively monitor innate structural parameters such as temperature, strain, and pressure. Intended for use in harsh structural environments, a distributed acoustic sensing system has been created using a single mode, radiation hardened, fused-silica core rod and a high-resolution acoustic sensor. This study aims to enhance the capabilities of the acoustic sensor by manipulating the fused-silica core rod, geometrically, to induce and control additional acoustic reflections. Here, two geometries are demonstrated to markedly improve upon previous fiber designs and result in a consistent acoustic profile.

Fully integrated fused quartz acoustic horns for structural health monitoring.

Non-destructive acoustic structural sensing is an imperative technology, applicable to many different fields such as aerospace and civil engineering. To maintain a high sensitivity or to mitigate acoustic loss, it is important to increase the signal-to-noise ratio by improving coupling efficiency from acoustic sources to the object under test, such as an acoustic waveguide. Here, a fully integrated fused quartz horn design is combined with a fused quartz acoustic waveguide. The resulting system is intended to demonstrate a high accuracy low cost alternative to current sensing systems and the present article report on the viability of using a merged acoustic horn and waveguide.

Application of Sapphire-Fiber-Bragg-Grating-Based Multi-Point Temperature Sensor in Boilers at a Commercial Power Plant.

Readily available temperature sensing in boilers is necessary to improve efficiencies, minimize downtime, and reduce toxic emissions for a power plant. The current techniques are typically deployed as a single-point measurement and are primarily used for detection and prevention of catastrophic events due to the harsh environment. In this work, a multi-point temperature sensor based on wavelength-multiplexed sapphire fiber Bragg gratings (SFBGs) were fabricated via the point-by-point method with a femtosecond laser. The sensor was packaged and calibrated in the lab, including thermally equilibrating at 1200 °C, followed by a 110-h, 1000 °C stability test. After laboratory testing, the sensor system was deployed in both a commercial coal-fired and a gas-fired boiler for 42 days and 48 days, respectively. The performance of the sensor was consistent during the entire test duration, over the course of which it measured temperatures up to 950 °C (with some excursions over 1000 °C), showing the survivability of the sensor in a field environment. The sensor has a demonstrated measurement range from room temperature to 1200 °C, but the maximum temperature limit is expected to be up to 1900 °C, based on previous work with other sapphire based temperature sensors.

Fiber Bragg grating fabricated in micro-single-crystal sapphire fiber.

This Letter introduces a fiber Bragg grating (FBG) in a micro-single-crystal sapphire fiber (micro-SFBG) for sensing applications in high-temperature and harsh environments. The FBG was fabricated by a point-by-point method via an IR-femtosecond laser in a large-diameter sapphire fiber that was then wet-hot acid etched to achieve microfiber size, which culminated in fabricating and characterizing a 9.6 µm diameter micro-SFBG. The refractive index measurement ranging from 1 to 1.75 and temperature measurement from room temperature to 1400°C are also reported.

Fabrication and characterization of periodically patterned silica fiber structures for enhanced second-order nonlinearity: publisher's note.

This publisher's note amends the author list of [Opt. Express23, 8113 (2015)].

Simple interrogator for optical fiber-based white light Fabry-Perot interferometers.

In this Letter, we present the design of a simple signal interrogator for optical fiber-based white light Fabry-Perot (F-P) interferometers. With the hardware being composed of only a flat fused silica wafer and a CCD camera, this interrogator translates the spectral interference into a spatial interference pattern, and then demodulates the F-P cavity length with the use of a relatively simple demodulation algorithm. The concept is demonstrated experimentally in a fiber optic sensor with a sapphire wafer as the F-P cavity.

Point-by-point fabrication and characterization of sapphire fiber Bragg gratings.

The Letter reports the inscription of fiber Bragg gratings (FBGs) in a single-crystal sapphire optical fiber via a point-by-point method by 780 nm infrared-femtosecond laser pulses. Compared to phase mask exposure, the use of the point-by-point method for the inscription provides a flexible way to fabricate sapphire FBGs and to make wavelength division multiplexing in sapphire fiber more practicable. The multiplexing of three cascade gratings is demonstrated, and their performance up to 1400°C is tested. The permanent enhancement of reflectivity by a factor of about 5 after heat treatment and the nearly linear temperature response with a slope of 25.8 pm/°C are demonstrated.

An all fiber-optic multi-parameter structure health monitoring system.

In this work, we present an all fiber-optics based multi-parameter structure health monitoring system, which is able to monitor strain, temperature, crack and thickness of metal structures. This system is composed of two optical fibers, one for laser-acoustic excitation and the other for acoustic detection. A nano-second 1064 nm pulse laser was used for acoustic excitation and a 2 mm fiber Bragg grating was used to detect the acoustic vibration. The feasibility of this system was demonstrated on an aluminum test piece by the monitoring of the temperature, strain and thickness changes, as well as the appearance of an artificial crack. The multiplexing capability of this system was also preliminarily demonstrated.

Mode-division-multiplexing of absorption-based fiber optical sensors.

We theoretically consider the possibility of using a few-mode fiber (FMF) and mode-division-multiplexing (MDM) to construct a quasi-distributed network of absorption-based fiber optical sensors. In this design, we utilize the low-attenuation fundamental linearly polarized (LP) mode for signal transmission, and a high-attenuation LP mode for absorption-based sensing. We develop a matrix formalism and use it to analyze the performance of such a MDM sensor network. We demonstrate that such a sensor network can indeed combine high sensitivity with large scale multiplexing, which is very difficult to achieve in traditional single-mode-fiber-based sensor networks.

Sourceless optical fiber high temperature sensor.

A sourceless sapphire fiber extrinsic Fabry-Perot interferometer for ultrahigh temperature sensing is developed. A sapphire wafer is mounted on the tip of a sapphire fiber as the Fabry-Perot cavity. The interference signal is generated by the thermal radiation that transmits through the wafer and is guided to a spectrometer by a sapphire and then a silica fiber. The entire sensor system is compact and low cost. The sensor was experimentally tested up to 1593°C, and a resolution around 1°C was achieved.