Hydrogen Bond Boosted Ferroelectric Polarization Enables High Rate Capability Lithium Metal Batteries.

Lithium metal is considered as a promising anode material for next generation lithium-based batteries due to its highest specific capacity and lowest reduction potential. However, irreversible lithium stripping/depositing gives rise to severe dendritic growth and countless dead lithium, which lead to rapid electrochemical performance degradation and increased safety hazards, and thus limit its large-scale application. Herein, this work demonstrates a universal hydrogen-bond-induced strategy to in situ form a highly polarized ferroelectric polyvinylidene fluoride (PVDF) coating on the anode current collector. The localized electric field induced by the polarized ferroelectric PVDF can accelerate the migration of lithium ions and alleviate the shortage of lithium ions and uneven ion/electron distribution and transfer at the anode/electrolyte interface, thus promoting uniform deposition and stripping of Li+ at high-rate situations. As a result, the symmetrical Li || Li batteries with polarized PVDF coating exhibit a long cycling lifespan over 900 h under 2 mA cm-2 with marginal voltage polarization, and an ultra-high-rate performance up to 8.85 mA cm-2 . The full cells using LiFePO4 cathode also display enhanced electrochemical performance. The innovative strategy of ferroelectric polarization sheds light on interface engineering to circumvent Li dendrite growth in lithium metal batteries (LMBs).

The circadian-controlled PIF8-BBX28 module regulates petal senescence in rose flowers by governing mitochondrial ROS homeostasis at night.

Reactive oxygen species (ROS) are unstable reactive molecules that are toxic to cells. Regulation of ROS homeostasis is crucial to protect cells from dysfunction, senescence, and death. In plant leaves, ROS are mainly generated from chloroplasts and are tightly temporally restricted by the circadian clock. However, little is known about how ROS homeostasis is regulated in nonphotosynthetic organs, such as petals. Here, we showed that hydrogen peroxide (H2O2) levels exhibit typical circadian rhythmicity in rose (Rosa hybrida) petals, consistent with the measured respiratory rate. RNA-seq and functional screening identified a B-box gene, RhBBX28, whose expression was associated with H2O2 rhythms. Silencing RhBBX28 accelerated flower senescence and promoted H2O2 accumulation at night in petals, while overexpression of RhBBX28 had the opposite effects. RhBBX28 influenced the expression of various genes related to respiratory metabolism, including the TCA cycle and glycolysis, and directly repressed the expression of SUCCINATE DEHYDROGENASE 1, which plays a central role in mitochondrial ROS (mtROS) homeostasis. We also found that PHYTOCHROME-INTERACTING FACTOR8 (RhPIF8) could activate RhBBX28 expression to control H2O2 levels in petals and thus flower senescence. Our results indicate that the circadian-controlled RhPIF8-RhBBX28 module is a critical player that controls flower senescence by governing mtROS homeostasis in rose.

Colloidal Inorganic Ligand-Capped Nanocrystals: Fundamentals, Status, and Insights into Advanced Functional Nanodevices.

Colloidal nanocrystals (NCs) are intriguing building blocks for assembling various functional thin films and devices. The electronic, optoelectronic, and thermoelectric applications of solution-processed, inorganic ligand (IL)-capped colloidal NCs are especially promising as the performance of related devices can substantially outperform their organic ligand-capped counterparts. This in turn highlights the significance of preparing IL-capped NC dispersions. The replacement of initial bulky and insulating ligands capped on NCs with short and conductive inorganic ones is a critical step in solution-phase ligand exchange for preparing IL-capped NCs. Solution-phase ligand exchange is extremely appealing due to the highly concentrated NC inks with completed ligand exchange and homogeneous ligand coverage on the NC surface. In this review, the state-of-the-art of IL-capped NCs derived from solution-phase inorganic ligand exchange (SPILE) reactions are comprehensively reviewed. First, a general overview of the development and recent advancements of the synthesis of IL-capped colloidal NCs, mechanisms of SPILE, elementary reaction principles, surface chemistry, and advanced characterizations is provided. Second, a series of important factors in the SPILE process are offered, followed by an illustration of how properties of NC dispersions evolve after ILE. Third, surface modifications of perovskite NCs with use of inorganic reagents are overviewed. They are necessary because perovskite NCs cannot withstand polar solvents or undergo SPILE due to their soft ionic nature. Fourth, an overview of the research progresses in utilizing IL-capped NCs for a wide range of applications is presented, including NC synthesis, NC solid and film fabrication techniques, field effect transistors, photodetectors, photovoltaic devices, thermoelectric, and photoelectrocatalytic materials. Finally, the review concludes by outlining the remaining challenges in this field and proposing promising directions to further promote the development of IL-capped NCs in practical application in the future.

Ferroelectric Dipoles Tailoring Solid-Electrolyte-Interphase Chemistry to Enable Reversible Lithium Metal Batteries.

Solid-electrolyte interphase (SEI) plays a decisive role in building reliable Li metal batteries. However, the scarcity of anions in Helmholtz layer (HL) caused by electrostatic repulsion usually leads to the inferior SEI derived from solvents, resulting in dendrites and 'dead' Li. Therefore, regulating the distribution of anions in electric double layer (EDL) and continuously introducing more anions into HL to tailor anions-derived SEI is crucial for achieving stable Li plating/stripping. Herein, by jointly utilizing the controlled defects of reduced graphene oxide (rGO) and the oriented dipoles of ferroelectric BaTiO3 (BTO), the rGO-BTO composite layer sustainedly brings more TFSI- and NO3- into anion-defecient HL, promoting favorable decomposition of anions and guiding the generation of robust and fast-Li+-transport SEI containing more inorganics LiF and Li3N species. Thus, the resulting Li deposit shows smooth and dense morphologies without dendrites, leading to high average Coulombic efficiency. The Li//Cu@rGO-BTO (10 mAh cm-2 plated Li) cell exhibits an enhanced Li plating/stripping stability (2700 h) and a higher rate capability. The LiFePO4 full cell (N/P=~6.3) using rGO-BTO displays an enhanced capacity retention (82.0% @ 430 cycles). This work provides a new insight on the construction of robust SEI by regulating the distribution of anions within EDL.

1D Choline-PbI3 -Based Heterostructure Boosts Efficiency and Stability of CsPbI3 Perovskite Solar Cells.

Defects in perovskite are key factors in limiting the photovoltaic performance and stability of perovskite solar cells (PSCs). Generally, choline halide (ChX) can effectively passivate defects by binding with charged point defects of perovskite. However, we verified that ChI can react with CsPbI3 to form a novel crystal phase of one-dimensional (1D) ChPbI3 , which constructs 1D/3D heterostructure with 3D CsPbI3 , passivating the defects of CsPbI3 more effectively and then resulting in significantly improved photoluminescence lifetime from 20.2 ns to 49.4 ns. Moreover, the outstanding chemical inertness of 1D ChPbI3 and the repair of undesired δ-CsPbI3 deficiency during its formation process can significantly enhance the stability of CsPbI3 film. Benefiting from 1D/3D heterostructure, CsPbI3 carbon-based PSCs (C-PSCs) delivered a champion efficiency of 18.05 % and a new certified record of 17.8 % in hole transport material (HTM)-free inorganic C-PSCs.

High-Efficient Visible-Light Photocatalysis Performance and Light-Corrosion Resistance of Ag3PO4 Constructed by double-Z System Composites.

Novel visible-light-driven Ag3PO4/AgBr/AgI photocatalysts were prepared via a simple self-assembly strategy combined with in-situ anion-exchanging process. The photocatalytic activity of Ag3PO4 was significantly improved by constructing double-Z system. Specifically, the obtained materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectroscopy (DRS). Under visible light irradiation (λ > 420 nm), the Ag3PO4/AgBr/AgI photocatalysts showed much higher photocatalytic activity than bulk Ag3PO4 for the degradation of formaldehyde (HCHO), and 100% HCHO degradation could be obtained within 28 min. The degradation efficiency could be maintained in five cycles. Further electron paramagnetic resonance (ESR) tests demonstrated that both •OH and •O2- generated in the system. This study provides new insights into the fabrication of highly efficient visible-light-driven photocatalysts and facilitates their practical application in emerging environment issues.

Improving the Efficiency of Quantum Dot Sensitized Solar Cells beyond 15% via Secondary Deposition.

Low loading is one of the bottlenecks limiting the performance of quantum dot sensitized solar cells (QDSCs). Although previous QD secondary deposition relying on electrostatic interaction can improve QD loading, due to the introduction of new recombination centers, it is not capable of enhancing the photovoltage and fill factor. Herein, without the introduction of new recombination centers, a convenient QD secondary deposition approach is developed by creating new adsorption sites via the formation of a metal oxyhydroxide layer around QD presensitized photoanodes. MgCl2 solution treated Zn-Cu-In-S-Se (ZCISSe) QD sensitized TiO2 film electrodes have been chosen as a model device to investigate this secondary deposition approach. The experimental results demonstrate that additional 38% of the QDs are immobilized on the photoanode as a single layer. Due to the increased QD loading and concomitant enhanced light-harvesting capacity and reduced charge recombination, not only photocurrent but also photovoltage and fill factor have been remarkably enhanced. The average PCE of resulted ZCISSe QDSCs is boosted to 15.31% (Jsc = 26.52 mA cm-2, Voc = 0.802 V, FF = 0.720), from the original 13.54% (Jsc = 24.23 mA cm-2, Voc = 0.789 V, FF = 0.708). Furthermore, a new certified PCE record of 15.20% has been obtained for liquid-junction QDSCs.

Identification of miRNAs-mediated seed and stone-hardening regulatory networks and their signal pathway of GA-induced seedless berries in grapevine (V. vinifera L.).

BACKGROUND: Stone-hardening stage is crucial to the development of grape seed and berry quality. A significant body of evidence supports the important roles of MicroRNAs in grape-berry development, but their specific molecular functions during grape stone-hardening stage remain unclear. RESULTS: Here, a total of 161 conserved and 85 species-specific miRNAs/miRNAs* (precursor) were identified in grape berries at stone-hardening stage using Solexa sequencing. Amongst them, 30 VvmiRNAs were stone-hardening stage-specific, whereas 52 exhibited differential expression profiles during berry development, potentially participating in the modulation of berry development as verified by their expression patterns. GO and KEGG pathway analysis showed that 13 VvmiRNAs might be involved in the regulation of embryo development, another 11 in lignin and cellulose biosynthesis, and also 28 in the modulation of hormone signaling, sugar, and proline metabolism. Furthermore, the target genes for 4 novel VvmiRNAs related to berry development were validated using RNA Ligase-Mediated (RLM)-RACE and Poly(A) Polymerase-Mediated (PPM)-RACE methods, and their cleavage mainly occurred at the 9th-11th sites from the 5' ends of miRNAs at their binding regions. In view of the regulatory roles of GA in seed embryo development and stone-hardening in grape, we investigated the expression modes of VvmiRNAs and their target genes during GA-induced grape seedless-berry development, and we validated that GA induced the expression of VvmiR31-3p and VvmiR8-5p to negatively regulate the expression levels of CAFFEOYL COENZYME A-3-O-METHYLTRANSFERASE (VvCCoAOMT), and DDB1-CUL4 ASSOCIATED FACTOR1 (VvDCAF1). The series of changes might repress grape stone hardening and embryo development, which might be a potential key molecular mechanism in GA-induced grape seedless-berry development. Finally, a schematic model of miRNA-mediated grape seed and stone-hardening development was proposed. CONCLUSION: This work identified 30 stone-hardening stage-specific VvmiRNAs and 52 significant differential expression ones, and preliminary interpreted the potential molecular mechanism of GA-induced grape parthenocarpy. GA negatively manipulate the expression of VvCCoAOMT and VvDCAF1 by up-regulation the expression of VvmiR31-3p and VvmiR8-5p, thereby repressing seed stone and embryo development to produce grape seedless berries.

Genome-wide identification and characterization of gibberellin metabolic and signal transduction (GA MST) pathway mediating seed and berry development (SBD) in grape (Vitis vinifera L.).

BACKGROUND: Grape is highly sensitive to gibberellin (GA), which is crucial during seed and berry development (SBD) either by itself or by interacting with other hormones, such as auxin, Abscisic acid (ABA), and Cytokinin (CK). However, no systematic analysis of GA metabolic and signal transduction (MST) pathway has been undertaken in grapevine. RESULTS: In this study, total endogenous GA3 content significantly decreased during SBD, and a total of 48 known genes in GA metabolic (GAM; 31) and signal transduction (ST; 17) pathways were identified in this process. In the GAM pathway, out of 31 genes, VvGA20ox1-1, VvGA3ox4-1, and VvGA2ox1-1 may be the major factors interacting at the green-berry stage (GBS) accompanied with higher accumulation rate. GA biosynthesis was greater than GA inactivation at GBS, confirming the importance of seeds in GA synthesis. The visible correlation between endogenous GA3 content and gene expression profiles suggested that the transcriptional regulation of GA biosynthesis pathway genes was a key mechanism of GA accumulation at the stone-hardening stage (SHS). Interestingly, we observed a negative feedback regulation between VvGA3oxs-VvGAI1-4, VvGA2oxs-VvGAI1-4, and VvGID1B-VvGAI1-4 in maintaining the balance of GA3 content in berries. Moreover, 11 miRNAs may be involved in the modulation of GA MST pathway by mediating their target genes, such as VvGA3ox, VvGID1B, and VvGAMYB. Many genes in auxin, ABA, and CK MST pathways were further identified and found to have a special pattern in the berry, and the crosstalk between GA and these hormones may modulate the complex process during SBD through the interaction gene network of the multihormone pathway. Lastly, based on the expression characterization of multihormone MST pathway genes, a proposed model of the GA-mediated multihormone regulatory network during SBD was proposed. CONCLUSIONS: Our results provided novel insights into GA-mediated regulatory networks during SBD in grape. The complexity of GA-mediated multihormone ST in SBD was also elucidated, thereby providing valuable information for future functional characterizations of specific genes in grape.

Characterization of VvSPL18 and Its Expression in Response to Exogenous Hormones during Grape Berry Development and Ripening.

The sequence and structure of grape SBP-box-like18 (VvSPL18) were identified and characterized to explore its regulatory roles during grape berry development and ripening. Homologous conservation across diverse plant species was observed, and its potential function and modulated roles in grapes were investigated. The results showed that VvSPL18 has an ORF sequence of 1,137 bp, encodes 378 amino acids, and is located on chromosome 14 of grapevine. VvSPL18 has the closest relationship with its homolog in soybeans. The promoter of VvSPL18 contains cis-elements responsive to gibberellins (GA) and salicylic acid (SA), indicating that this gene might respond to these hormones involved in the modulation of grape berry. VvSPL18 is mainly distributed in the nucleus. Expression profiles showed that VvSPL18 is highly expressed only at the veraison stage of the grape berry and is slightly expressed in other phases. RNA-seq data also revealed that VvSPL18 might participate in the modulation of grape berry development and ripening. Treatment with diverse hormones demonstrated that abscisic acid (ABA) had almost no effect on its expression, whereas naphthalene acetic acid (NAA) significantly upregulated its expression at the veraison stage. We also found that VvSPL18 has a GA-responsive cis-element but no NAA-responsive cis-element. GA could promote the expression of VvSPL18 with a peak at an earlier stage than NAA, suggesting that VvSPL18 responds faster to GA than to NAA. This result indicates that VvSPL18 might modulate berry development at this phase through an ABA-independent pathway, and it might directly respond to GA, but indirectly to NAA. Our findings provide insights into the functions of VvSPL18 in mediating grape berry development and ripening.

Correlations of ALDH2 rs671 and C12orf30 rs4767364 polymorphisms with increased risk and prognosis of esophageal squamous cell carcinoma in the Kazak and Han populations in Xinjiang province.

OBJECTIVE: Genetic polymorphisms in ALDH2 and C12orf30 genes have been reported to increase the risk of developing esophageal squamous cell carcinoma (ESCC). This study aims to investigate the relationship between ALDH2 rs671 and c12orf30 rs4767364 polymorphisms in the chromosome 12q24 gene, and risk and prognosis of individuals developing esophageal cancer (ESCC) in Xinjiang Kazak and Han populations. METHODS: The case group consisted of 127 ESCC patients. The control group comprised of 125 healthy individuals. Subjects that were recruited all come from Xinjiang province. TaqMan and the Hardy-Weinberg equilibrium were the main methods employed to detect and examine the distribution of genotypes of rs671 and rs4767364. RESULTS: The genotype frequencies of ALDH2 rs671 between the Kazak case and control groups were statistically significant, while no significant difference was observed between the Han case and control groups (P>.05). Moreover, ALDH2 rs671 (G>A) was associated with poor prognosis of ESCC in both Kazak and Han populations, and c12orf30 rs4767364 (A>G) was also connected with poor prognosis of ESCC in Kazak but not in Han population. CONCLUSION: In the chromosome 12q24 locus, ALDH2 rs671 (G>A) is related to the susceptibility to ESCC in Kazak populations, and it is also associated with poor prognosis of EC in Kazak and Han populations. Furthermore, c12orf30 rs4767364 (A>G) may be correlated with poor ESCC prognosis in Kazak population.

Improving the efficiency of quantum dot-sensitized solar cells by increasing the QD loading amount.

In quantum dot-sensitized solar cells (QDSCs), optimized quantum dot (QD) loading mode and high QD loading amount are prerequisites for great device performance. Capping ligand-induced self-assembly (CLIS) mode represents the mainstream QD loading strategy in the fabrication of high-efficiency QDSCs. However, there remain limitations in CLIS that constrain further enhancement of QD loading levels. This review illustrates the development of various QD loading methods in QDSCs, with an emphasis on the outstanding merits and bottlenecks of CLIS. Subsequently, thermodynamic and kinetic factors dominating QD loading behaviors in CLIS are analyzed theoretically. Upon understanding driving forces, resistances, and energy effects in a QD assembly process, various novel strategies for improving the QD loading amount in CLIS are summarized, and the related functional mechanism is established. Finally, the article concludes and outlooks some remaining academic issues to be solved, so that higher QD loading amount and efficiencies of QDSCs can be anticipated in the future.

Crosslinked solubilizer enables nitrate-enriched carbonate polymer electrolytes for stable, high-voltage lithium metal batteries.

High-voltage lithium metal batteries (LMBs) have been considered promising next-generation high-energy-density batteries. However, commercial carbonate electrolytes can scarcely be employed in LMBs owing to their poor compatibility with metallic lithium. N,N-dimethylacrylamide (DMAA)-a crosslinkable solubilizer with a high Gutmann donor number-is employed to facilitate the dissolution of insoluble lithium nitrate (LiNO3) in carbonate-based electrolytes and to form gel polymer electrolytes (GPEs) through in situ polymerization. The Li+ solvation structure of the GPEs is regulated using LiNO3 and DMAA, which suppresses the decomposition of LiPF6 and facilitates the formation of an inorganic-rich solid electrolyte interface. Consequently, the Coulombic efficiency (CE) of the Li||Cu cell assembled with a GPE increases to 98.5% at room temperature, and the high-voltage Li||NCM622 cell achieves a capacity retention of 80.1% with a high CE of 99.5% after 400 cycles. The bifunctional polymer electrolytes are anticipated to pave the way for next-generation high-voltage LMBs.

Limitations and Progresses in Carbon-Based Cesium Lead Halide Perovskite Solar Cells.

Inorganic cesium lead halide perovskites (CsPbIxBr3-x, 0≤x≤3) are promising alternatives with great thermal stability. Additionally, the choice of moisture-resistive and dopant-free carbon as the electrode material can simultaneously solve the problems of stability and cost. Therefore, carbon electrode-based inorganic PSCs (C-IPSCs) represent a promising candidate for commercialization, yet both the efficiencies and stability of related devices demand further progress. This article reviews the recent advancement of C-IPSCs and then unravels the distinctive merits and limitations in this field. Subsequently, our perspective on various modification strategies is analyzed on a methodological level. Finally, this article outlooks the promising research contents and the remaining unresolved issues in this field. We believe that understanding and analyzing the related problems in this field are instructive to stimulate the future development of C-IPSCs.

Orderly Arranged Dipoles Regulate Anion-Derived Solid-Electrolyte Interphase for Stable Lithium Metal Chemistry.

Lithium (Li) metal batteries are considered the most promising high-energy-density electrochemical energy storage devices of the next generation. However, the unstable solid-electrolyte interphase (SEI) derived from electrolytes usually leads to high impedance, Li dendrites growth, and poor cyclability. Herein, the ferroelectric BaTiO3 with orderly arranged dipoles (BTOV) is integrated into the polypropylene separator as a functional layer. Detailed characterizations and theoretical calculations indicate that surface oxygen vacancies drive the phase transition of BaTiO3 materials and promote the ordered arrangement of dipoles. The strong dipole moments in BTOV can adsorb TFSI- and NO3 - anions selectively and promote their preferential reduction to form a SEI film enriched with inorganic LiF and LiNxOy species, thus facilitating the rapid transfer of Li+ and restraining the growth of Li dendrites. As a result, the Li-Li cell with the BTOV functional layer exhibits enhanced Li plating/stripping cycling with an ultra-long life of over 7000 h at 0.5 mA cm-2/1.0 mAh cm-2. The LiFePO4 || Li (50 µm) full cells display excellent cycling performance exceeding 1760 cycles and superior rate performance. This work provides a new perspective for regulating SEI chemistry by introducing ordered dipoles to control the distribution and reaction of anions.

5- methylcytidine effectively improves spermatogenesis recovery in busulfan-induced oligoasthenospermia mice.

The function and regulatory mechanisms of 5-methylcytidine (m5C) in oligoasthenospermia remain unclear. In this study, we made a mouse model of oligoasthenospermia through the administration of busulfan (BUS). For the first time, we demonstrated that m5C levels decreased in oligoasthenospermia. The m5C levels were upregulated through the treatments of 5-methylcytidine. The testicular morphology and sperm concentrations were improved via upregulating m5C. The cytoskeletal regenerations of testis and sperm were accompanying with m5C treatments. m5C treatments improved T levels and reduced FSH and LH levels. The levels of ROS and MDA were significantly reduced through m5C treatments. RNA sequencing analysis showed m5C treatments increased the expression of genes involved in spermatid differentiation/development and cilium movement. Immunofluorescent staining demonstrated the regeneration of cilium and quantitative PCR (qPCR) confirmed the high expression of genes involved in spermatogenesis. Collectively, our findings suggest that the upregulation of m5C in oligoasthenospermia facilitates testicular morphology recovery and male infertility via multiple pathways, including cytoskeletal regeneration, hormonal levels, attenuating oxidative stress, spermatid differentiation/development and cilium movement. m5C may be a potential therapeutic agent for oligoasthenospermia.

Eliminating Hole Extraction Barrier in 1D/3D Perovskite Heterojunction for Efficient and Stable Carbon-Based CsPbI3 Solar Cells with a Record Efficiency.

Carbon-based perovskite solar cells (C-PSCs) have the advantages of low-cost and high-stability, but their photovoltaic performance is limited by severe defect-induced recombination and low hole extraction efficiency. 1D perovskite is proven to effectively passivate the defects on the perovskite surface, therefore reducing non-radiative recombination loss. However, the unsuitable energy level of most 1D perovskite renders an undesired downward band bending for 3D perovskite, resulting in a high hole extraction barrier and reduced hole extraction efficiency. Therefore, rational design and selection of 1D perovskites as the modifiers are essential in balancing defect passivation and hole extraction. In this work, based on simulation calculations, thiocholine iodide (TchI) is selected to prepare 1D perovskite with high work function and then constructs TchPbI3/CsPbI3 1D/3D perovskite heterojunction. Experimental results show that this strategy eliminates the hole extraction barrier at the perovskite/carbon interface, which improves the hole extraction efficiency of corresponding devices. Meanwhile, the strong interaction between the thiol group and Pb suppresses defect-induced recombination effectively and improves the stability of CsPbI3. The assembled C-PSCs exhibit a champion efficiency of 19.08% and a certified efficiency of 18.7%. To the best of the knowledge, this is a new efficiency record for inorganic C-PSCs.

Single­cell RNA sequencing analysis of human embryos from the late Carnegie to fetal development.

BACKGROUND: The cell development atlas of transition stage from late Carnegie to fetal development (7-9 weeks) remain unclear. It can be seen that the early period of human embryos (7-9 weeks) is a critical research gap. Therefore, we employed single­cell RNA sequencing to identify cell types and elucidate differentiation relationships. RESULTS: The single­cell RNA sequencing analysis determines eighteen cell clusters in human embryos during the 7-9 weeks period. We uncover two distinct pathways of cellular development and differentiation. Initially, mesenchymal progenitor cells differentiated into osteoblast progenitor cells and neural stem cells, respectively. Neural stem cells further differentiated into neurons. Alternatively, multipotential stem cells differentiated into adipocyte, hematopoietic stem cells and neutrophil, respectively. Additionally, COL1A2-(ITGA1 + ITGB1) mediated the cell communication between mesenchymal progenitor cells and osteoblast progenitor cells. NCAM1-FGFR1 facilitated the cell communication between mesenchymal progenitor cells and neural stem cells. Notably, NCAM1-NCAM1 as a major contributor mediated the cell communication between neural stem cells and neurons. Moreover, CGA-FSHR simultaneously mediated the communication between multipotential stem cells, adipocyte, hematopoietic stem cells and neutrophil. Distinct cell clusters activated specific transcription factors such as HIC1, LMX1B, TWIST1, and et al., which were responsible for their specific functions. These coregulators, such as HOXB13, VSX2, PAX5, and et al., may mediate cell development and differentiation in human embryos. CONCLUSIONS: We provide the cell development atlas for human embryos (7-9 weeks). Two distinct cell development and differentiation pathways are revealed.

In Situ Formed Heterostructure Interface and Well-Tuned Electronic Structure Ensuring Long Cycle Stability for 4.9 V High-Voltage Li-Rich Layered Oxide Cathodes.

High-voltage lithium-rich manganese-based layered oxides (LMLOs) are considered as the most competitive cathode materials for next-generation high-energy-density lithium-ion batteries (LIBs). However, LMLOs still suffer from irreversible lattice oxygen release, uncontrollable interface side reactions, and surface structural degradation. Herein, we propose an integration strategy combining La/Al codoping and LixCoPO4 nanocoating to improve the electrochemical performance of LMLOs comprehensively. La/Al codoping regulates the electronic structure to enhance the redox activity of anions and cations and inhibit structural degradation. The LixCoPO4 nanocoating formed by in situ reaction with the surface residual lithium can not only promote Li-ion migration but also reduce interfacial side reactions. The induced Layered@Rocksalt@LixCoPO4 heterostructure suppresses lattice volume variation and structural degradation during cycling. Under the synergistic effect of the heterostructure interface and well-tuned electronic structure, the capacity retention rate of comodified LMLO materials reaches 80.06% after 500 cycles (2.0-4.65 V) and 75.1% after 340 cycles at 1C under a high cut-off voltage of 4.9 V.

Photochemical degradation of perfluorooctanoic acid under UV irradiation in the presence of Fe (III)-saturated montmorillonite.

Perfluorooctanoic acid (PFOA) has attracted worldwide attention owing to its widespread distribution and potential ecological risks. Developing low-cost, green-chemical and highly efficient treatment approaches is significant for treating PFOA caused environmental issues. Herein, we propose a feasible PFOA degradation strategy under UV irradiation by adding Fe (III)-saturated montmorillonite (Fe-MMT), and the Fe-MMT could be regenerated after reaction. In our system consisting of 1 g L-1 Fe-MMT and 24 µM PFOA, nearly 90 % initial PFOA could be decomposed within 48 h. The enhanced PFOA decomposition could be explained by the ligand-to-metal charge transfer mechanism based on the generated reactive oxygen species (ROSs) and the transformation of iron species in the MMT layers. Moreover, the special PFOA degradation pathway was revealed according to the intermediate identification and the density functional theory calculation. Further experiments demonstrated that even in the presence of co-existing natural organic natter (NOM) and inorganic ions, efficient PFOA removal could still be obtained in UV/Fe-MMT system. This study offers a green-chemical strategy for PFOA removal from contaminated waters.