RESUMO
Two-dimensional topological materials have attracted intense research efforts owing to their promise in applications for low-energy, high-efficiency quantum computations. Group-VA elemental thin films with strong spin-orbit coupling have been predicted to host topologically nontrivial states as excellent two-dimensional topological materials. Herein, we experimentally demonstrated for the first time that the epitaxially grown high-quality antimonene monolayer islands with buckled configurations exhibit significantly robust one-dimensional topological edge states above the Fermi level. We further demonstrated that these topologically nontrivial edge states arise from a single p-orbital manifold as a general consequence of atomic spin-orbit coupling. Thus, our findings establish monolayer antimonene as a new class of topological monolayer materials hosting the topological edge states for future low-power electronic nanodevices and quantum computations.
RESUMO
Creation of functional patterns in two-dimensional (2D) materials provides opportunities to extend their potential for applications. Transition-metal dichalcogenides (TMDCs) are suitable 2D materials for pattern generation because of properties including alterable polymorphic phases, easy chalcogen-vacancy formation, metal-atom insertion, and alloying. Such patterning can be used for selective functionalization. Here we report the spontaneous formation of long-range, well-ordered 1D patterns in monolayer vanadium diselenide (VSe2) by a single annealing stage during growth. Atomic-resolution images in real space combined with density-functional-theory (DFT) calculations reveal the 1D features of patterned VSe2. Further experimental characterization of the intermediate states in the growth process confirm the spontaneous formation of the 1D pattern by annealing-induced Se-deficient linear defects. The 1D pattern can be reversibly transformed to homogenous VSe2 monolayer by reintroducing Se atoms. Moreover, additional experiments demonstrate that a dispersive deposition of Pt atoms along the 1D structures of patterned VSe2 is achieved, while DFT calculations find that their catalytic activity for hydrogen evolution reaction (HER) is as good as that of Pt surfaces. The formation of long-range, well-ordered 1D patterns not only demonstrates an effective way of dimension modulation in 2D materials but also enriches the potential of intrinsically patterned 2D materials for promising catalytic activities.
RESUMO
The discovery of graphene opened a door for manufacturing and investigating two-dimensional (2D) materials. After more than ten years of development, 2D materials have become one of the most important topics in materials research, with dozens of new materials having been synthesized experimentally and even more predicted theoretically. In this review, we provide a comprehensive overview of the fabrication of 2D materials based on epitaxial growth in an ultra-high vacuum (UHV) experimental environment and the investigation of their physical and chemical properties. In particular, we focus on techniques like intercalation, templated molecular adsorption, and direct selenization and tellurization of metal substrates. We discuss progress in fabrication methods of monatomic and binary 2D materials and highlight their interesting and quite unusual physical properties. Finally, we assess future directions of research in this field, where breakthroughs can be expected, and indicate where investments in additional research might be most rewarding scientifically.
RESUMO
Group-V elemental monolayers were recently predicted to exhibit exotic physical properties such as nontrivial topological properties, or a quantum anomalous Hall effect, which would make them very suitable for applications in next-generation electronic devices. The free-standing group-V monolayer materials usually have a buckled honeycomb form, in contrast with the flat graphene monolayer. Here, we report epitaxial growth of atomically thin flat honeycomb monolayer of group-V element antimony on a Ag(111) substrate. Combined study of experiments and theoretical calculations verify the formation of a uniform and single-crystalline antimonene monolayer without atomic wrinkles, as a new honeycomb analogue of graphene monolayer. Directional bonding between adjacent Sb atoms and weak antimonene-substrate interaction are confirmed. The realization and investigation of flat antimonene honeycombs extends the scope of two-dimensional atomically-thick structures and provides a promising way to tune topological properties for future technological applications.
RESUMO
Silicon-based two-dimensional (2D) materials are uniquely suited for integration in Si-based electronics. Silicene, an analogue of graphene, was recently fabricated on several substrates and was used to make a field-effect transistor. Here, we report that when Ru(0001) is used as a substrate, a range of distinct monolayer silicon structures forms, evolving toward silicene with increasing Si coverage. Low Si coverage produces a herringbone structure, a hitherto undiscovered 2D phase of silicon. With increasing Si coverage, herringbone elbows evolve into silicene-like honeycomb stripes under tension, resulting in a herringbone-honeycomb 2D superlattice. At even higher coverage, the honeycomb stripes widen and merge coherently to form silicene in registry with the substrate. Scanning tunneling microscopy (STM) was used to image the structures. The structural stability and electronic properties of the Si 2D structures, the interaction between the Si 2D structures and the Ru substrate, and the evolution of the distinct monolayer Si structures were elucidated by density functional theory (DFT) calculations. This work paves the way for further investigations of monolayer Si structures, the corresponding growth mechanisms, and possible functionalization by impurities.
RESUMO
Serving as neuromorphic hardware accelerators, memristors play a crucial role in large-scale neuromorphic computing. Herein, two-terminal memristors utilizing amorphous indium-gallium-zinc oxide (a-IGZO) are fabricated through room-temperature sputtering. The electrical characteristics of these memristors are effectively modulated by varying the oxygen flow during the deposition process. The optimized a-IGZO memristor, fabricated under 3 sccm oxygen flow, presents a 5 × 103 ratio between its high- and low-resistance states, which can be maintained over 1 × 104 s with minimal degradation. Meanwhile, desirable properties such as electroforming-free and self-compliance, crucial for low-energy consumption, are also obtained in the a-IGZO memristor. Moreover, analog conductance switching is observed, demonstrating an interface-type behavior, as evidenced by its device-size-dependent performance. The coexistence of negative differential resistance with analog switching is attributed to the migration of oxygen vacancies and the trapping/detrapping of charges. Furthermore, the device demonstrates optical storage capabilities by exploiting the optical properties of a-IGZO, which can stably operate for up to 50 sweep cycles. Various synaptic functions have been demonstrated, including paired-pulse facilitation and spike-timing-dependent plasticity. These functionalities contribute to a simulated recognition accuracy of 90% for handwritten digits. Importantly, a one-selector one-memristor (1S1M) architecture is successfully constructed at room temperature by integrating a-IGZO memristor on a TaOx-based selector. This architecture exhibits a 107 on/off ratio, demonstrating its potential to suppress sneak currents among adjacent units in a memristor crossbar.
RESUMO
Van der Waals (vdW) layered materials exhibit fruitful novel physical properties. The energy band of such materials depends strongly on their structures, and a tremendous variation in their physical properties can be deduced from a tiny change in inter-layer spacing, twist angle, or in-plane strain. In this work, a kind of vdW layered material of spiral antimonene is constructed, and the strain effects in the material are studied. The spiral antimonene is grown on a germanium (Ge) substrate and is induced by a helical dislocation penetrating through few atomic-layers of antimonene (ß-phase). The as-grown spiral is intrinsically strained, and the lattice distortion is found to be pinned around the dislocation. Both spontaneous inter-layer twist and in-plane anisotropic strain are observed in scanning tunneling microscope (STM) measurements. The strain in the spiral antimonene can be significantly modified by STM tip interaction, leading to a variation in the surface electronic density of states (DOS) and a large modification in the work function of up to a few hundreds of millielectron-volts (meV). Those strain effects are expected to have potential applications in building up novel piezoelectric devices.
RESUMO
1D grain boundaries in transition metal dichalcogenides (TMDs) are ideal for investigating the collective electron behavior in confined systems. However, clear identification of atomic structures at the grain boundaries, as well as precise characterization of the electronic ground states, have largely been elusive. Here, direct evidence for the confined electronic states and the charge density modulations at mirror twin boundaries (MTBs) of monolayer NbSe2 , a representative charge-density-wave (CDW) metal, is provided. The scanning tunneling microscopy (STM) measurements, accompanied by the first-principles calculations, reveal that there are two types of MTBs in monolayer NbSe2 , both of which exhibit band bending effect and 1D boundary states. Moreover, the intrinsic CDW signatures of monolayer NbSe2 are dramatically suppressed as approaching an isolated MTB but can be either enhanced or suppressed in the MTB-constituted confined wedges. Such a phenomenon can be well explained by the MTB-CDW interference interactions. The results reveal the underlying physics of the confined electrons at MTBs of CDW metals, paving the way for the grain boundary engineering of the functionality.
RESUMO
We report on high-resolution STM measurements with modified probe tips. First, both the rest atoms and adatoms of a Si(111)-7×7 surface are observed simultaneously. The visibility of rest atoms is dependent upon the sample bias voltage (less than -0.7 V) and is enhanced by sharpening the tip, which is rationalized by first-principles calculations. Second, a tip with a perylene molecule adsorbed at its apex is used to discriminate the molecular states and the metal states of the underlying Ag(110) surface, which is attributable to a mismatch between the energy levels of the functionalized tip and the adsorbates on silver. Lastly, high-resolution images of iron phthalocyanine (FePc) and zinc phthalocyanine (ZnPc) molecules on Au(111) are obtained by using an O(2)-terminated tip, and the images reveal rich intramolecular features arising from molecular orbitals that are not observed when using clean metallic tips.
Assuntos
Compostos Ferrosos/química , Indóis/química , Compostos Organometálicos/química , Oxigênio/química , Silício/química , Prata/química , Adsorção , Isoindóis , Microscopia de Tunelamento , Modelos Moleculares , Propriedades de Superfície , Compostos de ZincoRESUMO
Advanced exfoliation techniques are crucial for exploring the intrinsic properties and applications of 2D materials. Though the recently discovered Au-enhanced exfoliation technique provides an effective strategy for the preparation of large-scale 2D crystals, the high cost of gold hinders this method from being widely adopted in industrial applications. In addition, direct Au contact could significantly quench photoluminescence (PL) emission in 2D semiconductors. It is therefore crucial to find alternative metals that can replace gold to achieve efficient exfoliation of 2D materials. Here, the authors present a one-step Ag-assisted method that can efficiently exfoliate many large-area 2D monolayers, where the yield ratio is comparable to Au-enhanced exfoliation method. Differing from Au film, however, the surface roughness of as-prepared Ag films on SiO2 /Si substrate is much higher, which facilitates the generation of surface plasmons resulting from the nanostructures formed on the rough Ag surface. More interestingly, the strong coupling between 2D semiconductor crystals (e.g., MoS2 , MoSe2 ) and Ag film leads to a unique PL enhancement that has not been observed in other mechanical exfoliation techniques, which can be mainly attributed to enhanced light-matter interaction as a result of extended propagation of surface plasmonic polariton (SPP). This work provides a lower-cost and universal Ag-assisted exfoliation method, while at the same time offering enhanced SPP-matter interactions.
RESUMO
Two-dimensional materials provide extraordinary opportunities for exploring phenomena arising in atomically thin crystals. Beginning with the first isolation of graphene, mechanical exfoliation has been a key to provide high-quality two-dimensional materials, but despite improvements it is still limited in yield, lateral size and contamination. Here we introduce a contamination-free, one-step and universal Au-assisted mechanical exfoliation method and demonstrate its effectiveness by isolating 40 types of single-crystalline monolayers, including elemental two-dimensional crystals, metal-dichalcogenides, magnets and superconductors. Most of them are of millimeter-size and high-quality, as shown by transfer-free measurements of electron microscopy, photo spectroscopies and electrical transport. Large suspended two-dimensional crystals and heterojunctions were also prepared with high-yield. Enhanced adhesion between the crystals and the substrates enables such efficient exfoliation, for which we identify a gold-assisted exfoliation method that underpins a universal route for producing large-area monolayers and thus supports studies of fundamental properties and potential application of two-dimensional materials.
RESUMO
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
RESUMO
A dipolar Ru(II) complex, [(bpy)2Ru(bpbh)Ru(bpy)2](ClO4)4 {where bpbh = 1,6-bis-[2-(2-pyridyl) benzimidazoyl]hexane, bpy = 2,2'-bipyridine}, was synthesized and characterized. A multilayer film of at least 18 layers was successfully prepared by alternating adsorption of H4SiW12O40 and [Ru2(bpy)4(bpbh)](ClO4)4 by electrostatic layer-by-layer self-assembly. The multilayer films were studied by ultraviolet-visible and X-ray photoelectron spectroscopy, atomic force microscopy, and cyclic voltammetry.
RESUMO
Recent experimental breakthroughs open up new opportunities for magnetism in few-atomic-layer two-dimensional (2D) materials, which makes fabrication of new magnetic 2D materials a fascinating issue. Here, we report the growth of monolayer VSe2 by molecular beam epitaxy (MBE) method. Electronic properties measurements by scanning tunneling spectroscopy (STS) method revealed that the as-grown monolayer VSe2 has magnetic characteristic peaks in its electronic density of states and a lower work-function at its edges. Moreover, air exposure experiments show air-stability of the monolayer VSe2. This high-quality monolayer VSe2, a very air-inert 2D material with magnetism and low edge work function, is promising for applications in developing next-generation low power-consumption, high efficiency spintronic devices and new electrocatalysts.
RESUMO
Monolayer antimonene is fabricated on PdTe2 by an epitaxial method. Monolayer antimonene is theoretically predicted to have a large bandgap for nanoelectronic devices. Air-exposure experiments indicate amazing chemical stability, which is great for device fabrication. A method to fabricate high-quality monolayer antimonene with several great properties for novel electronic and optoelectronic applications is provided.
RESUMO
2D materials with heterolayered structures beyond graphene are explored. A theoretically predicted superconductor-topological insulator-normal metal heterolayered structure is realized experimentally. The generated hybrid structure HfTe3 /HfTe5 /Hf has potential applications in both quantum-spin Hall effect-based and Majorana-based devices.