Ingenious Synergy of a Pathology-Specific Biomimetic Multifunctional Nanoplatform for Targeted Therapy in Rheumatoid Arthritis.

Based on the pathological characteristics of rheumatoid arthritis, including the overproduction of reactive oxygen species (ROS), inflammatory responses, and osteoclast differentiation, a biomimetic multifunctional nanomedicine (M-M@I) is designed. Iguratimod (IGU) is loaded, which inhibits inflammatory responses and osteoclast differentiation, into mesoporous polydopamine (MPDA), which scavenges ROS. Subsequently, the nanoparticles are coated with a cell membrane of macrophages to achieve actively targeted delivery of the nanoparticles to inflamed joints. It is shown that the M-M@I nanoparticles are taken up well by lipopolysaccharide-induced RAW 264.7 macrophages or bone marrow-derived macrophages (BMDMs). In vitro, the M-M@I nanoparticles effectively scavenge ROS, downregulate genes related to inflammation promotion and osteoclast differentiation, and reduce the proinflammatory cytokines and osteoclast-related enzymes. They also reduce the polarization of macrophages to a pro-inflammatory M1 phenotype and inhibit differentiation into osteoclasts. In mice with collagen-induced arthritis, the M-M@I nanoparticles accumulate at arthritic sites and circulate longer, significantly mitigating arthritis symptoms and bone destruction. These results suggest that the pathology-specific biomimetic multifunctional nanoparticles are effective against rheumatoid arthritis, and they validate the approach of developing multifunctional therapies that target various pathological processes simultaneously.

Polarization-dependent effects in vibrational absorption spectra of 2D finite-size adsorbate islands on dielectric substrates.

In the last few years, infrared reflection-absorption spectroscopy (IRRAS) has become a standard technique to study vibrational excitations of molecules. These investigations are strongly motivated by potential applications in monitoring chemical processes. For a better understanding of the adsorption mechanism of molecules on dielectrics, the polarization-dependence of an interaction of infrared light with adsorbates on dielectric surfaces is commonly used. Thus, the peak positions in absorption spectra could be different for s- and p-polarized light. This shift between the peak positions depends on both the molecule itself and the dielectric substrate. While the origin of this shift is well understood for infinite two-dimensional adsorbate layers, finite-size samples, which consist of 2D islands of a small number of molecules, have never been considered. Here, we present a study on polarization-dependent finite-size effects in the optical response of such islands on dielectric substrates. The study uses a multi-scale modeling approach that connects quantum chemistry calculations with Maxwell scattering simulations. We distinguish the optical response of a single molecule, a finite number of molecules, and a two-dimensional adsorbate layer. We analyze CO and CO2 molecules deposited on CeO2 and Al2O3 substrates. The evolution of the shift between the polarization-dependent absorbance peaks is first studied for a single molecule, which does not exhibit any shifting at all, and for finite molecular islands, where it increases with increasing island size, as well as for an infinite two-dimensional adsorbate layer. In the latter case, the agreement between the obtained results and the experimental IRRAS data and more traditional three/four-layer model theoretical studies supports the predictive power of the multi-scale approach.

The Development of an Isotope Dilution Mass Spectrometry Method for Interleukin-6 Quantification.

Inflammatory responses and tumor developments are closely related, with interleukin-6 (IL-6) playing important roles in both processes. IL-6 has been extensively identified as a potential tumor biomarker. This study developed an isotope dilution mass spectrometry (IDMS) method for quantifying IL-6 based on signature peptides. These peptides were screened by excluding those with missed cleavage or post-translational modification. The method's accuracy was verified using amino acid-based IDMS, in which purified IL-6 protein samples were quantified after hydrolyzing them into amino acids, and no significant difference was observed (p-value < 0.05). The method demonstrated good linearity and sensitivity upon testing. The specificity and matrix effect of the method were verified, and a precision study showed that the coefficient of variation was less than 5% for both the intra-day and inter-day tests. Compared to immunoassays, this method offers distinct advantages, such as the facilitation of multi-target analysis. Furthermore, the peptides used in this study are much more convenient for storage and operation than the antibodies or purified proteins typically used in immunoassays.

Structure and Chemical Reactivity of Y-Stabilized ZrO2 Surfaces: Importance for the Water-Gas Shift Reaction.

The surface structure and chemical properties of Y-stabilized zirconia (YSZ) have been subjects of intense debate over the past three decades. However, a thorough understanding of chemical processes occurring at YSZ powders faces significant challenges due to the absence of reliable reference data acquired for well-controlled model systems. Here, we present results from polarization-resolved infrared reflection absorption spectroscopy (IRRAS) obtained for differently oriented, Y-doped ZrO2 single-crystal surfaces after exposure to CO and D2O. The IRRAS data reveal that the polar YSZ(100) surface undergoes reconstruction, characterized by an unusual, red-shifted CO band at 2132 cm-1. Density functional theory calculations allowed to relate this unexpected observation to under-coordinated Zr4+ cations in the vicinity of doping-induced O vacancies. This reconstruction leads to a strongly increased chemical reactivity and water spontaneously dissociates on YSZ(100). The latter, which is an important requirement for catalysing the water-gas-shift (WGS) reaction, is absent for YSZ(111), where only associative adsorption was observed. Together with a novel analysis Scheme these reference data allowed for an operando characterisation of YSZ powders using DRIFTS (diffuse reflectance infrared Fourier transform spectroscopy). These findings facilitate rational design and tuning of YSZ-based powder materials for catalytic applications, in particular CO oxidation and the WGS reaction.

Ultrastrong Electron-Phonon Coupling in Uranium-Organic Frameworks Leading to Inverse Luminescence Temperature Dependence.

Electron-phonon interactions, crucial in condensed matter, are rarely seen in Metal-Organic Frameworks (MOFs). Detecting these interactions typically involves analyzing luminescence in lanthanide- or actinide-based compounds. Prior studies on Ln- and Ac-based MOFs at high temperatures revealed additional peaks, but these were too faint for thorough analysis. In our research, we fabricated a high-quality, crystalline uranium-based MOF (KIT-U-1) thin film using a layer-by-layer method. Under UV light, this film showed two distinct "hot bands," indicating a strong electron-phonon interaction. At 77 K, these bands were absent, but at 300 K, a new emission band appeared with half the intensity of the main luminescence. Surprisingly, a second hot band emerged above 320 K, deviating from previous findings in rare-earth compounds. We conducted a detailed ab-initio analysis employing time-dependent density functional theory to understand this unusual behaviour and to identify the lattice vibration responsible for the strong electron-phonon coupling. The KIT-U-1 film's hot-band emission was then utilized to create a highly sensitive, single-compound optical thermometer. This underscores the potential of high-quality MOF thin films in exploiting the unique luminescence of lanthanides and actinides for advanced applications.

Highly Active Oxidation Catalysts through Confining Pd Clusters on CeO2 Nano-Islands.

CeO2-supported noble metal clusters are attractive catalytic materials for several applications. However, atomic dispersion under oxidizing reaction conditions often leads to catalyst deactivation. In this study, the noble metal cluster formation threshold is rationally adjusted by using a mixed CeO2-Al2O3 support. The preferential location of Pd on CeO2 islands leads to a high local surface noble metal concentration and promotes the in situ formation of small Pd clusters at a rather low noble metal loading (0.5 wt.%), which are shown to be the active species for CO conversion at these low temperatures. As elucidated by complementary in situ/operando techniques, the spatial separation of CeO2 islands on Al2O3 confines the mobility of Pd, preventing the full redispersion or the formation of larger noble metal particles and maintaining a high CO oxidation activity at low temperatures. In a broader perspective, this approach to more efficiently use the noble metal can be transferred to further systems and reactions in heterogeneous catalysis.

Vibrational frequencies of CO bound to all three low-index cerium oxide surfaces: A consistent theoretical description of vacancy-induced changes using density functional theory.

The facet-dependent adsorption of CO on oxidized and reduced CeO2 single crystal surfaces is reviewed, with emphasis on the effect of CO coverage and the ability of state-of-the-art quantum-mechanical methods to provide reliable energies and an accurate description of the IR vibrational frequency of CO. Comparison with detailed, high-resolution experimental infrared reflection absorption spectroscopy data obtained for single crystal samples allows the assignment of the different CO vibrational bands observed on all three low-index ceria surfaces. Good agreement is achieved with the hybrid density functional theory approach with the HSE06 functional and with saturation coverage. It is shown that CO is very sensitive to the structure of cerium oxide surfaces and to the presence of oxygen vacancies. The combined theoretical-experimental approach offers new opportunities for a better characterization of ceria nanoparticles and for unraveling changes occurring during reactions involving CO at higher pressures.

Reconstruction of Water-Filled Pipe Ultrasonic Guided Wave Signals in the Distance Domain by Orthogonal Matching Pursuit Based on Dispersion and Multi-Mode.

Ultrasonic guided waves (UGWs) in water-filled pipes are subject to more severe dispersion and attenuation than vacant pipes, posing significant challenges for defect identification and localization. To this end, a novel sparse signal decomposition method called orthogonal matching pursuit based on dispersion and multi-mode (DMOMP) was proposed, which utilizes the second-order asymptotic solution of dispersion curves and the conversion characteristics of asymmetric UGWs in the defect contact stage to reconstruct the dispersive signals and converts the time-domain dispersive signals to distance-domain non-dispersive signals by dispersion compensated time-distance mapping. The synthesized simulation results indicate that DMOMP not only exhibits higher reconstruction accuracy compared to OMP, but also reveals more accurate and stable mode recognition and localization compared to DOMP, which only considers the dispersion under perturbation and noise. In addition, the UGW testing experimental results of water-filled pipes verify the effectiveness of DMOMP, the localization accuracies of three feature signals (defct 1, defct 2 and end echo) with DMOMP are 99.10%, 98.72% and 98.36%, respectively, and the average localization accuracy of DMOMP is as high as 98.73%.

Metal-Organic Framework Thin Films as Ideal Matrices for Azide Photolysis in Vacuum.

Studies on reactions in solutions are often hampered by solvent effects. In addition, detailed investigation on kinetics is limited to the small temperature regime where the solvent is liquid. Here, we report the in situ spectroscopic observation of UV-induced photochemical reactions of aryl azides within a crystalline matrix in vacuum. The matrices are formed by attaching the reactive moieties to ditopic linkers, which are then assembled to yield metal-organic frameworks (MOFs) and surface-mounted MOFs (SURMOFs). These porous, crystalline frameworks are then used as model systems to study azide-related chemical processes under ultrahigh vacuum (UHV) conditions, where solvent effects can be safely excluded and in a large temperature regime. Infrared reflection absorption spectroscopy (IRRAS) allowed us to monitor the photoreaction of azide in SURMOFs precisely. The in situ IRRAS data, in conjunction with XRD, MS, and XPS, reveal that illumination with UV light first leads to forming a nitrene intermediate. In the second step, an intramolecular rearrangement occurs, yielding an indoloindole derivative. These findings unveil a novel pathway for precisely studying azide-related chemical transformations. Reference experiments carried out for solvent-loaded SURMOFs reveal a huge diversity of other reaction schemes, thus highlighting the need for model systems studied under UHV conditions.

Erratum: Vibrational Frequencies of Cerium-Oxide-Bound CO: A Challenge for Conventional DFT Methods [Phys. Rev. Lett. 125, 256101 (2020)].

This corrects the article DOI: 10.1103/PhysRevLett.125.256101.

CO adsorption on the calcite(10.4) surface: a combined experimental and theoretical study.

Detailed information on structural, chemical, and physical properties of natural cleaved (10.4) calcite surfaces was obtained by a combined atomic force microscopy (AFM) and infrared (IR) study using CO as a probe molecule under ultrahigh vacuum (UHV) conditions. The structural quality of the surfaces was determined using non-contact AFM (NC-AFM), which also allowed assigning the adsorption site of CO molecules. Vibrational frequencies of adsorbed CO species were determined by polarization-resolved infrared reflection absorption spectroscopy (IRRAS). At low exposures, adsorption of CO on the freshly cleaved (10.4) calcite surface at a temperature of 62 K led to the occurrence of a single C-O vibrational band located at 2175.8 cm-1, blue-shifted with respect to the gas phase value. For larger exposures, a slight, coverage-induced redshift was observed, leading to a frequency of 2173.4 cm-1 for a full monolayer. The width of the vibrational bands is extremely small, providing strong evidence that the cleaved calcite surface is well-defined with only one CO adsorption site. A quantitative analysis of the IRRA spectra recorded at different surface temperatures revealed a CO binding energy of -0.31 eV. NC-AFM data acquired at 5 K for sub-monolayer CO coverage reveal single molecules imaged as depressions at the position of the protruding surface features, in agreement with the IRRAS results. Since there are no previous experimental data of this type, the interpretation of the results was aided by employing density functional theory calculations to determine adsorption geometries, binding energies, and vibrational frequencies of carbon monoxide on the (10.4) calcite surface. It was found that the preferred geometry of CO on this surface is adsorption on top of calcium in a slightly tilted orientation. With increased coverage, the binding energy shows a small decrease, revealing the presence of repulsive adsorbate-adsorbate interactions.

The Effects of Suprasegmental Phonological Training on English Reading Comprehension: Evidence from Chinese EFL Learners.

This study aims to investigate the effect of suprasegmental phonological training on connected-text reading comprehension of Chinese university students with different English reading proficiency levels. A sample of 160 freshmen was recruited and randomly divided into experimental and control groups, and the experimental group was given a 12-week training on stress, intonation and rhythm in English. Comparison and analysis of the subjects' reading comprehension performance, involving overall accuracy and speed as well as literal and inferential comprehension, reveal that: (1) suprasegmental phonological training exerts positive effects on the subjects' overall reading comprehension, especially on reading time and literal comprehension; (2) lower-proficiency readers improve more remarkably than higher-proficiency readers in terms of overall accuracy and literal comprehension, while the effect of the training on reading time is significant regardless of the subjects' reading proficiency. The results indicate that with explicit instruction and intensive exposure to suprasegmental knowledge, students' automaticity in lower level processing, such as parsing and understanding propositional messages, can be increased. From a perspective of interaction among different cognitive and psychological processes of reading comprehension, this study can shed light on developing students' reading comprehension in EFL contexts.

Vibrational Frequencies of Cerium-Oxide-Bound CO: A Challenge for Conventional DFT Methods.

In ceria-based catalysis, the shape of the catalyst particle, which determines the exposed crystal facets, profoundly affects its reactivity. The vibrational frequency of adsorbed carbon monoxide (CO) can be used as a sensitive probe to identify the exposed surface facets, provided reference data on well-defined single crystal surfaces together with a definitive theoretical assignment exist. We investigate the adsorption of CO on the CeO_{2}(110) and (111) surfaces and show that the commonly applied DFT(PBE)+U method does not provide reliable CO vibrational frequencies by comparing with state-of-the-art infrared spectroscopy experiments for monocrystalline CeO_{2} surfaces. Good agreement requires the hybrid DFT approach with the HSE06 functional. The failure of conventional density-functional theory (DFT) is explained in terms of its inability to accurately describe the facet- and configuration-specific donation and backdonation effects that control the changes in the C─O bond length upon CO adsorption and the CO force constant. Our findings thus provide a theoretical basis for the detailed interpretation of experiments and open up the path to characterize more complex scenarios, including oxygen vacancies and metal adatoms.

Probing the Water Stability Limits and Degradation Pathways of Metal-Organic Frameworks.

A comprehensive model to describe the water stability of prototypical metal-organic frameworks (MOFs) is derived by combining different types of theoretical and experimental approaches. The results provide an insight into the early stages of water-triggered destabilization of MOFs and allow detailed pathways to be proposed for the degradation of different MOFs under aqueous conditions. The essential elements of the approach are computing the pKa values of coordinated water molecules and geometry relaxations. Variable-temperature and pH infrared spectroscopy techniques are used to corroborate the main findings. The model developed herein helps to explain stability limits observed for several prototypical MOFs, including MOF-5, HKUST-1, UiO-66, and MIL-101-Cr, in aqueous solutions, and thus, provides an insight into the possible degradation pathways in acidic and basic environments. The formation of a metal hydroxide through the autoprotolysis of metal-coordinated water molecules and the strength of carboxylate-metal interactions are suggested to be two key players that govern stability in basic and acidic media, respectively. The methodology presented herein can effectively guide future efforts, which are especially significant for in silico screening, for developing novel MOFs with enhanced aqueous stability.

Chemical Reactivity of Supported ZnO Clusters: Undercoordinated Zinc and Oxygen Atoms as Active Sites.

The growth of ZnO clusters supported by ZnO-bilayers on Ag(111) and the interaction of these oxide nanostructures with water have been studied by a multi-technique approach combining temperature-dependent infrared reflection absorption spectroscopy (IRRAS), grazing-emission X-ray photoelectron spectroscopy, and density functional theory calculations. Our results reveal that the ZnO bilayers exhibiting graphite-like structure are chemically inactive for water dissociation, whereas small ZnO clusters formed on top of these well-defined, yet chemically passive supports show extremely high reactivity - water is dissociated without an apparent activation barrier. Systematic isotopic substitution experiments using H2 16 O/D2 16 O/D2 18 O allow identification of various types of acidic hydroxyl groups. We demonstrate that a reliable characterization of these OH-species is possible via co-adsorption of CO, which leads to a red shift of the OD frequency due to the weak interaction via hydrogen bonding. The theoretical results provide atomic-level insight into the surface structure and chemical activity of the supported ZnO clusters and allow identification of the presence of under-coordinated Zn and O atoms at the edges and corners of the ZnO clusters as the active sites for H2 O dissociation.

Interplay of Electronic and Steric Effects to Yield Low-Temperature CO Oxidation at Metal Single Sites in Defect-Engineered HKUST-1.

In contrast to catalytically active metal single atoms deposited on oxide nanoparticles, the crystalline nature of metal-organic frameworks (MOFs) allows for a thorough characterization of reaction mechanisms. Using defect-free HKUST-1 MOF thin films, we demonstrate that Cu+ /Cu2+ dimer defects, created in a controlled fashion by reducing the pristine Cu2+ /Cu2+ pairs of the intact framework, account for the high catalytic activity in low-temperature CO oxidation. Combining advanced IR spectroscopy and density functional theory we propose a new reaction mechanism where the key intermediate is an uncharged O2 species, weakly bound to Cu+ /Cu2+ . Our results reveal a complex interplay between electronic and steric effects at defect sites in MOFs and provide important guidelines for tailoring and exploiting the catalytic activity of single metal atom sites.

Bridge Bonded Oxygen Ligands between Approximated FeN4 Sites Confer Catalysts with High ORR Performance.

The applications of the most promising Fe-N-C catalysts are prohibited by their limited intrinsic activities. Manipulating the Fe energy level through anchoring electron-withdrawing ligands is found effective in boosting the catalytic performance. However, such regulation remains elusive as the ligands are only uncontrollably introduced oweing to their energetically unstable nature. Herein, we report a rational manipulation strategy for introducing axial bonded O to the Fe sites, attained through hexa-coordinating Fe with oxygen functional groups in the precursor. Moreover, the O modifier is stabilized by forming the Fe-O-Fe bridge bond, with the approximation of two FeN4 sites. The energy level modulation thus created confers the sites with an intrinsic activity that is over 10 times higher than that of the normal FeN4 site. Our finding opens a novel strategy to manage coordination environments at an atomic level for high activity ORR catalysts.

Ginseng stem-leaf saponins in combination with selenium enhance immune responses to an attenuated pseudorabies virus vaccine.

Pseudorabies, a herpesvirus infection, is mainly controlled by using attenuated live vaccines. In this study, the effect of ginseng stem and leaf saponins (GSLS) in combination with selenium (Se; in the form of sodium selenite) on vaccination against attenuated pseudorabies virus (aPrV) was evaluated. It was found that GSLS and Se have an adjuvant effect and that a combination of GSLS and Se stimulates significantly enhanced immune responses than does GSLS or Se alone. Following oral administration of GSLS, mice immunized with an attenuated PrV vaccine diluted in Se-containing physiological saline solution (PSS) provoked a significantly stronger gB-specific serum antibodies response (IgG, IgG1 and IgG2a), enhanced lymphocyte proliferation and cytolytic activity of NK cells, along with higher production of cytokines (IFN-γ, IL-12, IL-5 and IL-10) by splenocytes. Notably, the combination of GSLS and Se conferred a much higher resistance to fPrV challenge after immunization of the mice with aPrV vaccine. This study offers convincing experimental evidence that an injection of Se with oral GSLS is a promising adjuvant combination that improves the efficacy of vaccination against PrV and deserves further study regarding improvement of responses to other animal vaccines.

Rho-Associated Protein Kinase (ROCK) Promotes Proliferation and Migration of PC-3 and DU145 Prostate Cancer Cells by Targeting LIM Kinase 1 (LIMK1) and Matrix Metalloproteinase-2 (MMP-2).

BACKGROUND In the pathogenesis and progression of prostate cancer, cell proliferation and cell migration results in tumor invasion and metastasis that is associated with patient morbidity and mortality. Rho-associated protein kinase (ROCK) has previously been shown to be upregulated in prostate cancer, but its biological role remains poorly understood. This study aimed to investigate the role of ROCK in the proliferation and migration of PC-3 and DU145 prostate cancer cells and to identify the possible targets involved by knockdown of ROCK1 and ROCK2 RNA expression. MATERIAL AND METHODS An RNA interference (RNAi) assay was performed to silence the expression of ROCK1 and ROCK2 in the PC-3 and DU145 human prostate cancer cell lines. Cells were also treated with a specific ROCK inhibitor, Y27632. A cell counting kit-8 (CCK-8) assay was used to determine the proliferation rate of prostate cancer cells, and cell migration and invasion assays were performed. Western blot and polymerase chain reaction were used to measure protein and RNA expression levels. RESULTS In PC-3 and DU145 prostate cancer cells, knockdown of ROCK1 and ROCK2 reduced cell migration and invasion. ROCK1 and ROCK2 regulated cell proliferation in PC-3 and DU145 prostate cancer cells. Protein levels of phosphorylated LIM kinase 1 (p-LIMK1) and matrix metalloproteinase-2 (MMP-2) were reduced in ROCK1 and ROCK2 siRNA transfected cells. CONCLUSIONS In PC-3 and DU145 human prostate cancer cells, ROCK promoted cell proliferation and migration by targeting LIMK1 and MMP-2.

κ-Opioid receptor stimulation reduces palmitate-induced apoptosis via Akt/eNOS signaling pathway.

BACKGROUND: This study was designed to test the hypothesis that κ-opioid receptor (κ-OR) stimulation reduces palmitate-induced HUVECs apoptosis and to investigate its mechanisms. METHODS: HUVECs were subjected to sodium palmitate, apoptosis and cell viability were determined, HUVECs were treated with specific inhibitors to PI3K, Akt, eNOS and siRNAs targeting κ-OR and Akt. Groups were divided as follows: the control group, the sodium palmitate group, the sodium palmitate+U50,488H (a selective κ-OR agonist) group and the sodium palmitate+U50,488H + nor-BNI (a selective κ-OR antagonist) group. RESULTS: Treatment with sodium palmitate significantly reduced cell viability and increased apoptosis rate which were significantly alleviated by pretreatment with U50,488H, the effect of U50,488H was abolished by nor-BNI. Phosphorylation of Akt and eNOS, as well as NO production were attenuated and accompanied by an increased expression of caspase 3 when HUVECs were subjected to sodium palmitate, and all these changes were restored by pretreatment with U50,488H, the effects of U50,488H were abolished by nor-BNI, and specific inhibitors to PI3K, Akt, eNOS, respectively. SiRNAs targeting κ-OR or Akt abolished the effects of U50,488H on phosphorylation of Akt and eNOS as well as the expressions of caspase 3, Bax and Bcl-2. SiRNAs targeting Akt elicited no effect on the expression of κ-OR. CONCLUSION: This study provides the evidence for the first time that κ-OR stimulation possesses anti-palmitate-induced apoptosis effect, which is mediated by PI3K/Akt/eNOS signaling pathway.