Interphase Engineering Enhanced Electro-chemical Stability of Prelithiated Anode.

Prelithiation is an essential technology to compensate for the initial lithium loss of lithium-ion batteries due to the formation of solid electrolyte interphase (SEI) and irreversible structure change. However, the prelithiated materials/electrodes become more reactive with air and electrolyte resulting in unwanted side reactions and contaminations, which makes it difficult for the practical application of prelithiation technology. To address this problem, herein, interphase engineering through a simple solution treatment after chemical prelithiation is proposed to protect the prelithiated electrode. The used solutions are carefully selected, and the composition and nanostructure of the as-formed artificial SEIs are revealed by cryogenic electron microscopy and X-ray photoelectron spectroscopy. The electrochemical evaluation demonstrates the unique merits of this artificial SEI, especially for the fluorinated interphase, which not only enhances the interfacial ion transport but also increases the tolerance of the prelithiated electrode to the air. The treated graphite electrode shows an initial Coulombic efficiency of 129.4%, a high capacity of 170 mAh g-1 at 3 C, and negligible capacity decay after 200 cycles at 1 C. These findings not only provide a facile, universal, and controllable method to construct an artificial SEI but also enlighten the upgrade of battery fabrication and the alternative use of advanced electrolytes.

Air-Stable Na3.5C6O6 as a Sodium Compensation Additive in Cathode of Na-Ion Batteries.

Sodium-ion battery (SIB) is a candidate for the stationary energy storage systems because of the low cost and high abundance of sodium. However, the energy density and lifespan of SIBs suffer severely from the irreversible consumption of the Na-ions for the formation of the solid electrolyte interphase (SEI) layer and other side reactions on the electrodes. Here, Na3.5C6O6 is proposed as an air-stable high-efficiency sacrificial additive in the cathode to compensate for the lost sodium. It is characteristic of low desodiation (oxidation) potential (3.4-3.6 V vs. Na+/Na) and high irreversible desodiation capacity (theoretically 378 mAh g-1). The feasibility of using Na3.5C6O6 as a sodium compensation additive is verified with the improved electrochemical performances of a Na2/3Ni1/3Mn1/3Ti1/3O2ǀǀhard carbon cells and cells using other cathode materials. In addition, the structure of Na3.5C6O6 and its desodiation path are also clarified on the basis of comprehensive physical characterizations and the density functional theory (DFT) calculations. This additive decomposes completely to supply abundant Na ions during the initial charge without leaving any electrochemically inert species in the cathode. Its decomposition product C6O6 enters the carbonate electrolyte without bringing any detectable negative effects. These findings open a new avenue for elevating the energy density and/or prolonging the lifetime of the high-energy-density secondary batteries.

Causal relationships between circulating inflammatory cytokines and diabetic neuropathy: A Mendelian Randomization study.

BACKGROUND: Emerging evidence suggests systemic inflammation as a critical mechanism underlying diabetic neuropathy. This study aimed to investigate the causal relationship between 41 circulating inflammatory cytokines and diabetic neuropathy. METHODS: Summary statistics from previous Genome-Wide Association studies (GWAS) included pooled data on 41 inflammatory cytokines and diabetic neuropathy. A two-sample Mendelian Randomization (MR) design was employed, and the robustness of the results was confirmed through comprehensive sensitivity analyses. RESULTS: Our study reveals that the linkage between increased levels of IFN_G (OR = 1.31, 95 %CI: 1.06-1.63; P = 0.014), IP_10 (OR = 1.18, 95 %CI: 1.01-1.36; P = 0.031) and an elevated risk of diabetic neuropathy. Conversely, higher levels of IL_9 (OR = 0.86, 95 %CI: 0.75-1.00; P = 0.048) and SCF (OR = 0.83, 95 %CI: 0.73-0.94; P = 0.003) are genetically determined to protect against diabetic neuropathy. Furthermore, the sensitivity analysis affirmed the results' dependability, revealing no heterogeneity or pleiotropy. CONCLUSION: Our MR research identified four upstream inflammatory cytokines implicated in diabetic neuropathy. Overall, these findings suggest the potential for innovative therapeutic strategies. Further large-scale cohort studies are required for validation.

Association Between Remnant Cholesterol and Risk of Hyperuricemia: A Cross-Sectional Study.

Remnant cholesterol (RC) is closely related to metabolic diseases. Our study aims to explore the relationship between RC and hyperuricemia. This cross-sectional study included 14 568 adults aged 20 years or older from the National Health and Nutrition Examination Survey (NHANES) conducted between 2007 and 2018 in the United States. RC is calculated by subtracting high-density lipoprotein cholesterol (HDL-c) and low-density lipoprotein cholesterol (LDL-c) from total cholesterol (TC). Hyperuricemia is defined by serum uric acid (SUA) levels≥7 mg/dl in men and≥6 mg/dl in women. The independent association between RC and hyperuricemia was evaluated. As the quartile range of RC levels increases, the prevalence of hyperuricemia also rises (7.84% vs. 13.71% vs. 18.61% vs. 26.24%, p<0.001). After adjusting for confounding factors, the fourth quartile of RC was associated with an increased risk of hyperuricemia compared with the first quartile (OR=2.942, 95% CI 2.473-3.502, p<0.001). Receiver Operating Characteristic (ROC) analysis shows that RC outperforms other single lipid indices in hyperuricemia. Further Restricted Cubic Splines (RCS) analysis suggests a nonlinear relationship between RC levels and hyperuricemia. Elevated RC levels were found to be linked to hyperuricemia. Further studies on RC hold promise for both preventing and addressing hyperuricemia.

The Relationship Between Remnant Cholesterol and Visceral Adipose Tissue: A National Cross-Sectional Study.

The aim of our study is to explore the relationship between remnant cholesterol (RC) levels and visceral adipose tissue (VAT) in the US adult population. This cross-sectional study utilized data from 5301 participants aged 20 to 59 years gathered by the National Health and Nutrition Examination Survey (NHANES). RC was determined by deducting both high-density lipoprotein cholesterol (HDL-c) and low-density lipoprotein cholesterol (LDL-c) from total cholesterol (TC), and VAT was measured using dual-energy X-ray absorptiometry. Visceral obesity is defined as a VAT area ≥ 100 cm2. With increasing quartiles of RC levels, the prevalence of visceral obesity rises (16.51% vs. 36.11% vs. 55.66% vs. 74.48%, p<0.001). After adjusting for confounders, RC levels positively correlate with visceral obesity risk (OR=1.039, 95% CI 1.031-1.048, p<0.001). Additionally, individuals with low LDL-c/high RC and those with high LDL-c/low RC showed 2.908-fold (95% CI 1.995-4.241) and 1.310-fold (95% CI 1.022-1.680) higher risk of visceral obesity, respectively, compared to those with low LDL-c/low RC. Receiver Operating Characteristic (ROC) and Decision Curve Analysis (DCA) show RC's superior predictive ability over other lipid markers. Subgroup analysis showed that the relationship between RC and visceral obesity was more ronounced in those with cardiovascular disease. Smooth curve fitting indicated a nonlinear relationship between RC levels and VAT area. Our study highlights that elevated levels of RC are associated with adverse accumulation of VAT. However, the causal relationship between RC and visceral obesity requires additional investigation.

The causal relationship between human blood metabolites and the risk of visceral obesity: a mendelian randomization analysis.

BACKGROUND: We aimed to explore the causal relationship between blood metabolites and the risk of visceral obesity, as measured by visceral adipose tissue (VAT). METHODS: Summary statistics for 486 blood metabolites and total, as well as sex-stratified, MRI-derived VAT measurements, adjusted for body mass index (BMI) and height, were collected from previous genome-wide association studies (GWAS). A two-sample Mendelian Randomization (MR) design was used. Comprehensive evaluation was further conducted, including sensitivity analysis, linkage disequilibrium score (LDSC) regression, Steiger test, and metabolic pathway analysis. RESULTS: After multiple testing correction, arachidonate (20:4n6) has been implicated in VAT accumulation (ß = 0.35, 95%CI:0.18-0.52, P < 0.001; FDR = 0.025). Additionally, several blood metabolites were identified as potentially having causal relationship (FDR < 0.10). Among them, lysine (ß = 0.67, 95%CI: 0.28-1.06, P < 0.001; FDR = 0.074), proline (ß = 0.30, 95%CI:0.13-0.48, P < 0.001; FDR = 0.082), valerate (ß = 0.50, 95%CI:0.23-0.78, P < 0.001, FDR = 0.091) are associated with an increased risk of VAT accumulation. On the other hand, glycine (ß=-0.21, 95%CI: -0.33-0.09), P < 0.001, FDR = 0.076) have a protective effect against VAT accumulation. Most blood metabolites showed consistent trends between different sexes. Multivariable MR analysis demonstrated the effect of genetically predicted arachidonate (20:4n6) and proline on VAT remained after accounting for BMI and glycated hemoglobin (HbA1c). There is no evidence of heterogeneity, pleiotropy, and reverse causality. CONCLUSION: Our MR findings suggest that these metabolites may serve as biomarkers, as well as for future mechanistic exploration and drug target selection of visceral obesity.

The relationship between non-high-density lipoprotein cholesterol to high-density lipoprotein cholesterol ratio (NHHR) and hyperuricaemia.

PURPOSE: The ratio of non-high-density lipoprotein cholesterol (non-HDL-c) to high-density lipoprotein cholesterol (HDL-c) (NHHR) is a novel comprehensive lipid index. The aim of this study was to investigate the relationship between the NHHR and the prevalence of hyperuricaemia (HUA) in the adult population of the U.S. METHODS: This cross-sectional study collected data from the National Health and Nutrition Examination Survey (NHANES) (2007-2018). HUA was defined as a serum uric acid (SUA) concentration ≥ 7 mg/dL in men and ≥ 6 mg/dL in women. Multivariate logistic regression models and the restricted cubic spline (RCS) method were applied to examine the relationship between the NHHR and the risk of developing HUA. Subgroup analyses and interaction tests were also performed. RESULTS: The prevalence of HUA increased with increasing NHHR values (9.01% vs. 13.38% vs. 17.31% vs. 25.79%, P < 0.001). The NHHR was independently correlated with the risk of developing HUA (OR = 1.10, 95% CI: 1.05-1.16; P < 0.001). Furthermore, the risk of developing HUA was significantly greater among individuals with the highest NHHR quartile than among those with the lowest NHHR quartile (OR = 1.94, 95% CI: 1.62-2.33; P < 0.001). This relationship was consistent across subgroups. According to the RCS analysis, an inverted U-shaped relationship existed between the NHHR and the risk of developing HUA. CONCLUSIONS: The NHHR was closely associated with an increased risk of developing HUA. Further studies on the NHHR could be beneficial for preventing and treating HUA.

Association between the atherogenic index of plasma and kidney stones: a nationally representative study.

PURPOSE: The atherogenic index of plasma (AIP) is a novel comprehensive lipid index. We aimed to investigate a possible relationship between AIP index and kidney stones in US adults. METHODS: This cross-sectional study was conducted among adults with complete AIP index and questionnaire records on kidney stones from the National Health and Nutrition Examination Survey (NHANES) spanning from 2007 to 2018. The AIP index served as the exposure variable, defined as the logarithm of the ratio between triglycerides (TG, mmol/L) and high-density lipoprotein cholesterol (HDL-c, mmol/L). Self-reported history of kidney stones was utilized as the outcome variable. The independent relationship between AIP index and the risk of kidney stones was fully assessed. RESULTS: A total of 14,833 participants were included in this study, with an average AIP index of -0.07 ± 0.01. The proportion of kidney stones progressively increased with higher AIP index tertile intervals (7.33% vs. 9.97% vs. 12.57%, P < 0.001). Furthermore, AIP index was found to be independently associated with the risk of kidney stones after adjusting for confounding factors (OR = 1.32, 95% CI 1.08-1.61, P = 0.006). Restricted cubic spline (RCS) analysis confirmed the robustness of our results. There was no significant interaction observed based on subgroup analysis stratified by age, gender, race, body mass index (BMI, kg/m2), smokers, diabetes, hypertension, and cardiovascular disease (P for interaction > 0.05). CONCLUSIONS: The AIP index may be a potential epidemiological tool to quantify the role of dyslipidemia in the risk of kidney stones in US adults.

Impaired sensitivity to thyroid hormone correlates to all-cause mortality in euthyroid individuals with chronic kidney disease.

BACKGROUND: This study aimed to investigate the association between central sensitivity to thyroid hormones and all-cause mortality in euthyroid patients with chronic kidney disease (CKD). METHODS: ​Data on thyroid function indicators and all-cause mortality for CKD patients were extracted from the NHANES database (2007-2012). Central sensitivities to thyroid hormones were mainly evaluated by Thyroid Feedback Quantile-based Index (TFQI). The Kaplan-Meier method, Cox proportional hazards regression model and subgroup analysis were performed to explore the potential associations between thyroid hormone sensitivity and all-cause mortality. RESULTS: A total of 1303 euthyroid CKD patients were enrolled in this study. After a median follow-up of 115 months, 503 participants died. The Kaplan-Meier analysis demonstrated significant variations in survival rates among different levels of TFQI (P = 0.0015). Cox regression analysis showed that increased levels of TFQI were independent risk factors for all-cause mortality after adjusting for multiple confounding factors (HR = 1.40, 95% CI 1.10-1.79, P = 0.007). Subgroup analysis did not reveal any significant variation in the association between TFQI and all-cause mortality between the subgroups assessed (P for interaction > 0.05). CONCLUSION: Our study suggests that impaired thyroid hormone sensitivity might be linked to increased mortality in euthyroid CKD patients. Further research is needed to confirm and explore this association.

Polymer Competitive Solvation Reduced Propylene Carbonate Cointercalation in a Graphitic Anode.

Polymer electrolytes have been studied as an alternative to organic liquid electrolytes but suffer from low ionic conductivity. Propylene carbonate (PC) proves to be an interesting solvent but is incompatible with graphitic anodes due to its cointercalation effect. In this work, adding poly(ethylene oxide) (PEO) into a PC-based electrolyte can alter the solvation structure as well as transform the solution into a polymer electrolyte with high ionic conductivity. By spectroscopic techniques and calculations, we demonstrate that PEO can compete with PC in solvating the Li+ ions, reducing the Li+-PC bond strength, and making it easier for PC to be desolvated. Due to the unique solvation structure, PC-cointercalation-induced graphite exfoliation is inhibited, and the reduction stability of the electrolyte is improved. This work will extend the applications of the PC-based electrolytes, deepen the understandings of the solvation structure, and spur designs of advanced electrolytes.

In Situ Detecting Thermal Stability of Solid Electrolyte Interphase (SEI).

Solid electrolyte interphase (SEI) plays an important role in regulating the interfacial ion transfer and safety of Lithium-ion batteries (LIBs). It is unstable and readily decomposed releasing much heat and gases and thus triggering thermal runaway. Herein, in situ heating X-ray photoelectron spectroscopy is applied to uncover the inherent thermal decomposition process of the SEI. The evolution of the composition, nanostructure, and the released gases are further probed by cryogenic transmission electron microscopy, and gas chromatography. The results show that the organic components of SEI are readily decomposed even at room temperature, releasing some flammable gases (e.g., H2 , CO, C2 H4 , etc.). The residual SEI after heat treatment is rich in inorganic components (e.g., Li2 O, LiF, and Li2 CO3 ), provides a nanostructure model for a beneficial SEI with enhanced stability. This work deepens the understanding of SEI intrinsic thermal stability, reveals its underlying relationship with the thermal runaway of LIBs, and enlightens to enhance the safety of LIBs by achieving inorganics-rich SEI.

Identification of Basement Membrane Genes and Related Molecular Subtypes in Nonalcoholic Fatty Liver Disease.

Basement membranes (BMs) are widely distributed and highly specialized extracellular matrix (ECM). The goal of this study was to explore novel genes associated with nonalcoholic fatty liver disease (NAFLD) from the perspective of BMs. Sequencing results of 304 liver biopsy samples about NAFLD were systematically obtained from the Gene Expression Omnibus (GEO) database. Biological changes during NAFLD progression and hub BM-associated genes were investigated by differential gene analysis and weighted gene co-expression network analysis (WGCNA), respectively. The nonalcoholic steatohepatitis (NASH) subgroups were identified based on hub BM-associated genes expression, as well as the differences in Kyoto Encyclopedia of Genes and Genomes (KEGG) signaling pathways and immune microenvironment between different subgroups were compared. Extracellular matrix (ECM) seems to play an important role in the development of NAFLD. Three representative BM-associated genes (ADAMTS2, COL5A1, and LAMC3) were finally identified. Subgroup analysis results suggested that there were significant changes in KEGG signaling pathways related to metabolism, extracellular matrix, cell proliferation, differentiation, and death. There were also changes in macrophage polarization, neutrophils, and dendritic cells abundance, and so on. In conclusion, the present study identified novel potential BM-associated biomarkers and further explored the heterogeneity of NASH that might provide new insights into the diagnosis, assessment, management, and personalized treatment of NAFLD.

Emerging roles of brassinosteroids and light in anthocyanin biosynthesis and ripeness of climacteric and non-climacteric fruits.

Anthocyanins are important pigments that contribute to fruit quality. The regulation of anthocyanin biosynthesis by several transcription factors via sophisticated regulatory networks has been studied in various plants. Brassinosteroids (BRs), a new class of plant hormone, are involved in regulating anthocyanin biosynthesis in fruits. Furthermore, light directly affects the synthesis and distribution of anthocyanins. Here, we summarize the recent progress toward understanding the impact of BR and light on anthocyanin biosynthesis in climacteric and non-climacteric fruits. We review the BR and light signaling pathways and highlight the important transcription factors that are associated with the synthesis of anthocyanins, such as BZR1 (brassinazole-resistant 1, BR signaling pathway), HY5 (elongated hypocotyl 5) and COP1 (constitutively photomorphogenic 1, light signal transduction pathway), which bind with the target genes involved in anthocyanin synthesis. In addition, we review the mechanism by which light signals interact with hormonal signals to regulate anthocyanin biosynthesis.

Development of single- and multiplex immunoassays for rapid detection and quantitation of amodiaquine in ACT drugs and rat serum.

Amodiaquine (AQ) is a commonly used antimalarial drug, and N-desethyl-AQ (N-DEAQ) is an active metabolite of AQ. Given the significance of drug quality in the management of malaria cases, this study aims to develop antibody-based assays for the detection and quantitation of AQ without the need for sophisticated equipment. Two monoclonal antibodies (mAbs) against AQ, designated as JUN7 and TE7, were selected, which showed 72.7% and 9.5% cross-reactivity to N-DEAQ, respectively. These mAbs showed <0.1% cross-reactivity to other commonly used antimalarial drugs. An indirect competitive enzyme-linked immunosorbent assay (icELISA) based on JUN7 showed a 50% inhibitory concentration (IC50) of 0.16 ng/mL and a working range of 0.06-0.46 ng/mL. A lateral flow immunoassay (LFIA) based on JUN7 was also developed with a working range of 2.58-30.86 ng/mL. The icELISA and LFIA were applied for the quantification of AQ in commercial drugs, and the results were comparable to those determined using high-performance liquid chromatography. In addition, a combination dipstick for simultaneous, qualitative analysis of AQ and artesunate was developed. All immunoassays based on JUN7 can be applied for quality control of AQ-containing artemisinin-based combination therapies. As TE7 showed low cross-reactivity to N-DEAQ, an icELISA based on TE7 was developed with an IC50 of 0.38 ng/mL and a working range of 0.14-1.67 ng/mL. The TE7 icELISA was applied for the study of pharmacokinetics of AQ in rat serum after intragastric administration, and the results were consistent with those of previous studies.

Anionic Effect on Enhancing the Stability of a Solid Electrolyte Interphase Film for Lithium Deposition on Graphite.

Graphitic carbons and their lithium composites have been utilized as lithium deposition substrates to address issues such as the huge volume variation and dendritic growth of lithium. However, new problems have appeared, including the severe exfoliation of the graphite particles and the instability of the solid electrolyte interphase (SEI) film when metallic lithium is plated on the graphite. Herein, we enhance the stability of the SEI film on the graphite substrate for lithium deposition in an electrolyte of lithium bis(fluorosulfonyl)imide (LiFSI) dissolved in the carbonate solvent, thereby improving the lithium plating/stripping cycle on it. The FSI- anion was found to be responsible for the formation of a compact SEI film under the lithium plating potential and could protect the graphite substrate. These findings refresh the understanding of the SEI stability and provide a suggestion on the design and development of electrolytes for the lithium batteries.

Competitive Solvation Enhanced Stability of Lithium Metal Anode in Dual-Salt Electrolyte.

The development of lithium metal batteries is hindered by the low Coulombic efficiency and poor cycling stability of the metallic lithium. The introduction of consumptive LiNO3 as an additive can improve the cycling stability, but its low solubility in the carbonate electrolytes makes this strategy impractical for long-term cycling. Herein we propose LiNO3 as a cosalt in the LiPF6-LiNO3 dual-salt electrolyte to enhance the cycling stability of lithium plating/stripping. Competitions among the components and the resultant substitution of NO3- for PF6- in the solvation shell facilitate the formation of a Li3N-rich solid electrolyte interphase (SEI) film and suppress the LiPF6 decomposition. The highly Li+ conductive and stable SEI film effectively tailors the lithium nucleation, suppresses the formation of lithium dendrites, and improves the cycling performance. The competitive solvation has profound importance for the design of a complex electrolyte to meet the multiple requirements of secondary lithium batteries.

Insights into Lithium and Sodium Storage in Porous Carbon.

The lithium and sodium storage behavior of porous carbon remains controversial, though it shows excellent cycling stability and rate performances. This Letter discloses the insertion, adsorption, and filling properties of porous carbon. 7Li nuclear magnetic resonance (NMR) spectroscopy recognized inserted and adsorbed lithium in this porous carbon but did not observe any other forms of lithium above 0.0 V vs. Li+/Li. In addition, although lithium insertion mainly takes place at low potentials, adsorption was found to be the main form of lithium storage throughout the investigated potential range. Such a storage feature is responsible for the excellent rate performance and high specific capacity of porous carbon. Raman spectroscopy further demonstrated the structural reversibility of the carbon in different potential ranges, verifying the necessity to optimize the potential range for a better cycling performance. These findings provide insights for the design and application of porous carbon.

[Design and application of neural electrical stimulation system with time-varying parameters].

Currently, commercial devices for electrical neural stimulations can only provide fixed stimulation paradigms with preset constant parameters, while the development of new stimulation paradigms with time-varying parameters has emerged as one of the important research directions for expanding clinical applications. To facilitate the performance of electrical stimulation paradigms with time-varying parameters in animal experiments, the present study developed a well-integrated stimulation system to output various pulse sequences by designing a LabVIEW software to control a general data acquisition card and an electrical stimulus isolator. The system was able to generate pulse sequences with inter-pulse-intervals (IPI) randomly varying in real time with specific distributions such as uniform distribution, normal distribution, gamma distribution and Poisson distribution. It was also able to generate pulse sequences with arbitrary time-varying IPIs. In addition, the pulse parameters, including pulse amplitude, pulse width, interphase delay of biphasic pulse and duration of pulse sequence, were adjustable. The results of performance tests of the stimulation system showed that the errors of the parameters of pulse sequences output by the system were all less than 1%. By utilizing the stimulation system, pulse sequences with IPI randomly varying in the range of 5~10 ms were generated and applied in rat hippocampal regions for animal experiments. The experimental results showed that, even with a same mean pulse frequency of ~130 Hz, for neuronal populations, the excitatory effect of stimulations with randomly varying IPIs was significantly greater than the effect of stimulations with fixed IPIs. In conclusion, the stimulation system designed here may provide a useful tool for the researches and the development of new paradigms of neural electrical stimulations.

Sinusoidal stimulation on afferent fibers modulates the firing pattern of downstream neurons in rat hippocampus.

Electrical stimulation in the brain is an emerging therapy for treating a wide range of neurological disorders. Although electrical pulses are commonly used in the clinic, other electrical waveforms such as sinusoidal-waves have been investigated to improve the therapeutic efficacy, to reduce the risk of tissue damage induced by stimulation, and to decrease the consumption of electrical energy. However, the effects of sinusoidal stimulation on neuronal activity are still unclear. In the present study, we investigated the neuronal responses to the stimulation of 50-Hz sinusoidal-waves applied on the afferent fibers of the neurons in the hippocampal CA1 region of Sprague-Dawley rat in vivo. Results show that the stimulation increased the firing rate of both pyramidal neurons and interneurons in the downstream region of stimulation. Also, the stimulation eliminated the original theta rhythms (2-5 Hz) in the single-unit activity of the two types of neurons and entrained these neurons to fire at the stimulation rhythm. These results provide new clues for the mechanisms of brain stimulation to suppress the pathological rhythms in the neuronal activity, and for the application of sinusoidal waveforms in brain stimulation therapy.

Lithium Plating and Stripping on Carbon Nanotube Sponge.

Lithium metal is an ideal anode material due to its high specific capacity and low redox potential. However, issues such as dendritic growth and low Coulombic efficiency prevent its application in secondary lithium batteries. The use of three-dimensional (3D) porous current collector is an effective strategy to solve these problems. Herein, commercial carbon nanotube (CNT) sponge is used as a 3D current collector for dendrite-free lithium metal deposition to improve the Coulombic efficiency and the cycle stability of the lithium metal batteries. The high specific surface area of the CNT increases the density of the lithium nucleation sites and ensures the uniform lithium deposition while the "pre-lithiation" behavior of the porous CNT enhances its affinity with the deposited lithium. Meanwhile, the lithium plating/stripping on the sponge maintains high Coulombic efficiency and high cycling stability due to the robust structure of graphitic-amorphous carbon composite in the ether-based electrolyte. Our findings exhibit the feasibility of using CNT sponge as a 3D porous current collector for lithium deposition. They shed light on designing and developing advanced current collectors for the lithium metal electrode and will promote the commercialization of the secondary lithium batteries.