RESUMO
Chemical reaction data in journal articles, patents, and even electronic laboratory notebooks are currently stored in various formats, often unstructured, which presents a significant barrier to downstream applications, including the training of machine-learning models. We present the Open Reaction Database (ORD), an open-access schema and infrastructure for structuring and sharing organic reaction data, including a centralized data repository. The ORD schema supports conventional and emerging technologies, from benchtop reactions to automated high-throughput experiments and flow chemistry. The data, schema, supporting code, and web-based user interfaces are all publicly available on GitHub. Our vision is that a consistent data representation and infrastructure to support data sharing will enable downstream applications that will greatly improve the state of the art with respect to computer-aided synthesis planning, reaction prediction, and other predictive chemistry tasks.
RESUMO
Preparative electrospray (ES) exploits the acceleration of reactions in charged microdroplets to perform a small scale chemical synthesis. In combination with on-line mass spectrometric (MS) analysis, it constitutes a rapid screening tool to select reagents to generate specific products. A successful reaction in preparative ES triggers a refined microfluidic reaction screening procedure which includes the optimization for stoichiometry, temperature and residence time. We apply this combined approach for refining a flow synthesis of atropine. A successful preparative ES pathway for the synthesis of the phenylacetyl ester intermediate, using tropine/HCl/phenylacetyl chloride, was optimized for solvent in both the preparative ES and microfluidics flow systems and a base screening was conducted by both methods to increase atropine yield, increase percentage conversion and reduce byproducts. In preparative ES, the first step yielded 55% conversion (judged using MS) to intermediate and the second step yielded 47% conversion to atropine. When combined in two discrete steps in continuous-flow microfluidics, a 44% conversion of the starting material and a 30% actual yield of atropine were achieved. When the reactions were continuously telescoped in a new form of preparative reactive extractive electrospray (EES), atropine was synthesized with a 24% conversion. The corresponding continuous-flow microfluidics experiment gave a 55% conversion with an average of 34% yield in 8 min residence time. This is the first in depth study to utilize telescoped preparative ES and the first use of dual ESI emitters for multistep synthesis.
RESUMO
Thin film formats are used to study the Claisen-Schmidt base-catalyzed condensation of 6-hydroxy-1-indanone with substituted benzaldehydes and to compare the reaction acceleration relative to the bulk. Relative acceleration factors initially exceeded 103 and were on the order of 102 at steady state, although the confined volume reaction was not electrostatically driven. Substituent effects were muted compared to those in the corresponding bulk and microdroplet reactions and it is concluded that the rate-limiting step at steady state is reagent transport to the interface. Conditions were found that allowed product deposition from the thin film to occur continuously as the reaction mixture was added and as the solvent evaporated. Yields of 74 % and production rates of 98â mg h-1 were reached in a very simple experimental system that could be multiplexed to greater scales.
RESUMO
Ionization of molecular species from one-dimensional (1D) tellurium nanowires (Te NWs) has been achieved at 1 V. Molecules with a range of chemical functional groups gave quality mass spectra with high signal/noise ratios and no fragment ions. Experiments suggest the possibility of emission of microdroplets of solution due to the intense fields at the ends or interfaces of nanostructures. It appears that electrolytic conduction of the solution wetting of the nanostructures and not the electronic conduction of the nanostructures themselves is involved in the ionization event. Anisotropy was seen when two-dimensionally aligned Te NWs were used for ionization. The orientation effect of aligned Te NWs on molecular ion intensity is demonstrated for many analytes including organic molecules and amino acids with experiments done using a silicon substrate having aligned Te NWs. These measurements suggest the possibility of creating a MS source that extends the applicability of mass spectrometry. Analysis of a variety of analytes, including amino acids, pesticides, and drugs, in pure form and in complex mixtures, is reported. These experiments suggest that 1D nanostructures in general could be excellent ionization sources.
RESUMO
The analytical performance and a suggested mechanism for zero volt paper spray using chromatography paper are presented. A spray is generated by the action of the pneumatic force of the mass spectrometer (MS) vacuum at the inlet. Positive and negative ion signals are observed, and comparisons are made with standard kV paper spray (PS) ionization and nanoelectrospray ionization (nESI). While the range of analytes to which zero volt PS is applicable is very similar to kV PS and nESI, differences in the mass spectra of mixtures are interpreted in terms of the more significant effects of analyte surface activity in the gentler zero volt experiment than in the other methods due to the significantly lower charge. The signal intensity of zero volt PS is also lower than in the other methods. A Monte Carlo simulation based on statistical fluctuation of positive and negative ions in solution has been implemented to explain the production of ions from initially uncharged droplets. Uncharged droplets first break up due to aerodynamics forces until they are in the 2-4 µm size range and then undergo Coulombic fission. A model involving statistical charge fluctuations in both phases predicts detection limits similar to those observed experimentally and explains the effects of binary mixture components on relative ionization efficiencies. The proposed mechanism may also play a role in ionization by other voltage-free methods.
RESUMO
Electrospray ionization of metal salt solutions followed by ambient heating transforms the resulting salt clusters into new species, primarily naked ionic metal clusters. The experiment is done by passing the clusters through a heated coiled loop outside the mass spectrometer which releases the counter-anion while generating the anionic or cationic naked metal cluster. The nature of the anion in the starting salt determines the type of metal cluster observed. For example, silver acetate upon heating generates only positive silver clusters, Ag(n)(+), but silver fluoride generates both positive and negative silver clusters, Ag(n)(+/-) (3 < n < 20). Both unheated and heated metal salt sprays yield ions with characteristic geometric and electronic magic numbers. There is also a strong odd/even effect in the cationic and anionic silver clusters. Thermochemical control is suggested as the basis for favored formation of the observed clusters, with anhydride elimination occurring from the acetates and fluorine elimination from the fluorides to give cationic and anionic clusters, respectively. Data on the intermediates observed as the temperature is ramped support this. The naked metal clusters react with gaseous reagents in the open air, including methyl substituted pyridines, hydrocarbons, common organic solvents, ozone, ethylene, and propylene. Argentation of hydrocarbons, including saturated hydrocarbons, is shown to occur and serves as a useful analytical ionization method. The new cluster formation methodology allows investigation of ligand-metal binding including in reactions of industrial importance, such as olefin epoxidation. These reactions provide insight into the physicochemical properties of silver cluster anions and cations. The potential use of the ion source in ion soft landing is demonstrated by reproducing the mass spectra of salts heated in air using a custom surface science instrument.
RESUMO
High-throughput experimentation (HTE) has become more widely utilized in drug discovery for rapid reaction optimization and generation of large synthetic compound arrays. While this has accelerated medicinal chemistry design, make, test (DMT) iterations, the bottleneck of purification persists, consuming time and resources. Herein we describe a general parallel purification approach based on solid phase extraction (SPE) that provides a more efficient and sustainable workflow producing compound libraries with significantly upgraded purity. This robust, user-friendly workflow is fully automated and integrated with HTE library synthesis, as demonstrated by its application to a diverse parallel library compound array generated via amide-bond coupling in HTE microscale format.
Assuntos
Amidas , Descoberta de DrogasRESUMO
RATIONALE: This paper reports the development of arrays of capillary-based low-temperature plasma (LTP) probes for direct sample analysis. These probe arrays allow a higher surface area to be analyzed, increasing the throughput in large sample analysis. Validation of these arrays was performed on illicit, cathinone-based drugs marketed as 'bath salts'. METHODS: LTP arrays consisting of 1, 7, and 19 probes were constructed with quartz capillaries and held together with silver epoxy resin adhesive. Three drugs, mephedrone, methylone and methylenedioxypyrovalerone, were analyzed with each plasma ion source and an ion trap mass spectrometer in full MS and in MS/MS positive ion mode. Chemical and thermal footprints were determined for each source. A reactive probe design was used to inject trifluoroacetic anhydride directly into the plasma stream for on-line derivatization. RESULTS: Small LTP probes and bundled arrays provide low picogram level limits of detection for mephedrone, methylone and methylenedioxypyrovalerone. Bundling the probes together in larger arrays increases the surface area analyzed by a factor of ten, while maintaining surface temperatures below 40 °C. Selectivity towards mephedrone and methylone was increased using trifluoracetylation under ambient ionization conditions. CONCLUSIONS: Low-temperature plasma ionization sources allow rapid detection of illicit 'bath salt' drugs in low amounts. The sources have a larger sampling area that allows faster detection of each analyte, and selectivity towards the selected drug is enhanced by adding reagents directly into the plasma stream.
Assuntos
Espectrometria de Massas/métodos , Gases em Plasma/química , Benzodioxóis/análise , Benzodioxóis/química , Temperatura Baixa , Drogas Ilícitas/análise , Drogas Ilícitas/química , Limite de Detecção , Espectrometria de Massas/instrumentação , Metanfetamina/análogos & derivados , Metanfetamina/análise , Metanfetamina/química , Modelos Químicos , Pirrolidinas/análise , Pirrolidinas/química , Reprodutibilidade dos Testes , Catinona SintéticaRESUMO
The design and characterization of a system for in situ Raman analysis of surfaces prepared by ion soft landing (SL) is described. The performance of the new high vacuum compatible, low cost, surface analysis capability is demonstrated with surface enhanced Raman spectroscopy (SERS) of surfaces prepared by soft landing of ions of crystal violet, Rhodamine 6G, methyl orange and copper phthalocyanine. Complementary in situ mass spectrometric information is recorded for the same surfaces using a previously implemented secondary ion mass spectrometer (SIMS). Imaging of the modified surfaces is achieved using 2D Raman imaging as demonstrated for the case of Rhodamine 6G soft landing. The combination of the powerful molecular characterization tools of SERS and SIMS in a single instrument fitted with in-vacuum sample transport capabilities, facilitates in situ analysis of surfaces prepared by ion SL. In particular, information is provided on the charge state of the soft landed species. In the case of crystal violet the SERS data suggest that the positively charged ions being landed retain their charge state on the surface under vacuum. By contrast, in the case of methyl orange which is landed as an anion, the SERS spectra suggest that the SL species has been neutralized.
RESUMO
Palladium-catalyzed Suzuki-Miyaura (SM) coupling is widely utilized in the construction of carbon-carbon bonds. In this study, nanoelectrospray ionization mass spectrometry (nanoESI-MS) is applied to simultaneously monitor precatalysts, catalytic intermediates, reagents, and products of the SM cross-coupling reaction of 3-Br-5-Ph-pyridine and phenylboronic acid. A set of Pd cluster ions related to the monoligated Pd (0) active catalyst is detected, and its deconvoluted isotopic distribution reveals contributions from two neutral molecules. One is assigned to the generally accepted Pd(0) active catalyst, seen in MS as the protonated molecule, while the other is tentatively assigned to an oxidized catalyst which was found to increase as the reaction proceeds. Oxidative stress testing of a synthetic model catalyst 1,5-cyclooctadiene Pd XPhos (COD-Pd-XPhos) performed using FeCl3 supported this assignment. The formation and conversion of the oxidative addition intermediate during the catalytic cycle was monitored to provide information on the progress of the transmetalation step.
RESUMO
We report the high throughput analysis of reaction mixture arrays using methods and data handling routines that were originally developed for biological tissue imaging. Desorption electrospray ionization (DESI) mass spectrometry (MS) is applied in a continuous on-line process at rates that approach 104 reactions per h at area densities of up to 1 spot per mm2 (6144 spots per standard microtiter plate) with the sprayer moving at ca. 104 microns per s. Data are analyzed automatically by MS using in-house software to create ion images of selected reagents and products as intensity plots in standard array format. Amine alkylation reactions were used to optimize the system performance on PTFE membrane substrates using methanol as the DESI spray/analysis solvent. Reaction times can be <100 µs when reaction acceleration occurs in microdroplets, enabling the rapid screening of processes like N-alkylation and Suzuki coupling reactions as reported herein. Products and by-products were confirmed by on-line MS/MS upon rescanning of the array.
RESUMO
A highly integrated approach to the development of a process for the continuous synthesis and purification of diphenhydramine is reported. Mass spectrometry (MS) is utilized throughout the system for on-line reaction monitoring, off-line yield quantitation, and as a reaction screening module that exploits reaction acceleration in charged microdroplets for high throughput route screening. This effort has enabled the discovery and optimization of multiple routes to diphenhydramine in glass microreactors using MS as a process analytical tool (PAT). The ability to rapidly screen conditions in charged microdroplets was used to guide optimization of the process in a microfluidic reactor. A quantitative MS method was developed and used to measure the reaction kinetics. Integration of the continuous-flow reactor/on-line MS methodology with a miniaturized crystallization platform for continuous reaction monitoring and controlled crystallization of diphenhydramine was also achieved. Our findings suggest a robust approach for the continuous manufacture of pharmaceutical drug products, exemplified in the particular case of diphenhydramine, and optimized for efficiency and crystal size, and guided by real-time analytics to produce the agent in a form that is readily adapted to continuous synthesis.
RESUMO
An ambient solution-state method for making uniform nanobrushes composed of oriented 1D silver nanowires (NWs) with aspect ratios of 10(2) -10(4) is reported. These structures are grown over cm(2) areas on conducting surfaces. Assemblies of NWs form uniform nanobrush structures, which can capture micrometer-sized objects, such as bacteria and particulate matter. Variation in composition produces unique structures with catalytic properties.
RESUMO
The combination of thin layer chromatography (TLC) and mass spectrometry (MS) has been studied for decades, but for most cases MS detection is done after TLC separation is finished. Here, an online simultaneous TLC-MS analysis system, liquid thin layer chromatography-mass spectrometry (LTLC-MS), is developed which successfully synchronize TLC separation process and MS detection process like GC-MS and HPLC-MS do. And there's no need to use specially designed TLC, just regular TLC plates are enough. LTLC-MS method is composed of a newly developed ambient ionization method, glow discharge-matrix assisted infrared desorption ionization (GD-MAIRDI), and forced-flow TLC (FFTLC) technique, which guarantees the MS detection process does not disturb the TLC separation process throughout the whole analysis. The whole LTLC-MS analysis only need two steps and less than 15min. Mixtures as well as the two main components of a pain relief pills have been successfully analyzed by LTLC-MS. This proof of concept study opens up new possibilities of combining TLC with MS, and will further broaden the application abilities of TLC.