Implementation of ATP and Microbial Indicator Testing for Hygiene Monitoring in a Tofu Production Facility Improves Product Quality and Hygienic Conditions of Food Contact Surfaces: A Case Study.

Rapid ATP testing and microbiological enumeration are two common methods to monitor the effectiveness of cleaning and sanitation in the food industry. In this study, ATP testing and microbiological enumeration were implemented at a tofu production facility with the goal of improving cleaning practices and overall plant hygiene. Results from ATP monitoring were used to target areas of the production environment needing additional cleaning; ATP results were verified by microbiological enumeration of aerobic microorganisms, lactic acid bacteria, and yeasts and molds. Products from the production line were enumerated for the same microorganisms to determine if there was an impact on product quality. After the implementation of ATP monitoring and targeted cleaning, there was a statistically lower proportion of swabs that failed to meet established sanitary requirements for ATP, aerobic microorganisms, and lactic acid bacteria (p < 0.05), but not for yeasts and molds. ATP swabs and microbiological enumeration agreed on site hygiene 75.1% (72.3-77.7%, 95% CI) of the time. Product data indicated that unpasteurized finished products contained a statistically lower microbial load of the three groups of organisms following implementation of the practices (p < 0.05).ImportanceCleaning and sanitation are critical to maintaining safe and high-quality food production. Monitoring these activities is important to ensure proper execution of procedure and to assure compliance with regulatory guidelines. The results from monitoring activities can direct targeted cleaning of areas with higher risk of contamination from foodstuffs and microorganisms. The results of this study show that ATP monitoring and microbiological enumeration are useful tools to verify and improve the efficacy of cleaning and sanitation practices, which can have a positive impact on both plant hygiene and product quality. However, testing regimes and critical parameters will vary based on the product and facility.

Association of fungal genera from spoiled processed foods with physicochemical food properties and processing conditions.

The processing conditions and physiochemical properties used in food manufacturing create niches which support the growth of a limited number of spoilage fungi. This study was designed to evaluate the influence of intrinsic and extrinsic food product variables on the identity of spoilage fungi genera isolated from commercially produced foods. The spoilage etiology was identified in 127 products through ITS region sequencing. The prevalence and diversity of the identified spoilage fungi were evaluated in relationship to product-specific attributes using various descriptive statistics and a bipartite network analysis. Additionally, recursive partitioning was used to generate a classification tree with the outcomes, genera of the spoilage isolates, divided into increasingly homogenous subgroups. All of the isolated fungi belonged to the Ascomycete phylum, except four mucoralian isolates and the basidiomycete Rhodotorula. The occurrence of filamentous fungi repeatedly isolated ranged from 2% (Phoma spp.) to 18% (Penicillium spp.). In order of decreasing contribution to subgroup homogeneity, the split rules for the classification tree were based on process, water activity, food matrix category, and pH. Fungal genera representation in the terminal nodes indicated that production failures, in addition to product-specific attributes, were responsible for determination of the most probable spoilage organism.

The Anti-Staphylococcal Potential of Ethanolic Polish Propolis Extracts.

The principal objective of this study was to determine the anti-staphylococcal potential of ethanol extracts of propolis (EEPs). A total of 20 samples of propolis collected from apiaries located in different regions of Poland were used in the study. The two-fold broth microdilution method revealed some important differences in the antimicrobial activity of investigated EEPs. Up to the concentration of 4096 µg/mL no activity was observed against Gram-negative bacteria (E. coli and P. aeruginosa). Staphylococci exhibited much higher susceptibility. The highest efficiency observed for EEP12 and EEP20 (MIC values ranged between 32 and 256 µg/mL). However, the achievement of bactericidal effect usually required higher concentrations. In the case of clinical isolates of S. aureus MBC values for EEP12 and EEP20 ranged from 512 to 1024 µg/mL. The HPLC analysis revealed that these two products contained a higher concentration of flavonoids (flavonols, flavones, and flavanones) compared to other investigated EEPs. In checkerboard test, a synergistic anti-staphylococcal effect was observed for the action of EEP20 in combination with amikacin, kanamycin, gentamycin, tetracycline, and fusidic acid (all these antibiotics inhibit protein synthesis). Moreover, the investigated EEPs effectively eradicated staphylococcal biofilm. The obtained results clearly confirm the high anti-staphylococcal potential of propolis harvested in Polish apiaries.

Nature Abhors a Vacuum: Highly Diverse Mechanisms Enable Spoilage Fungi to Disperse, Survive, and Propagate in Commercially Processed and Preserved Foods.

Fungal spoilage in processed foods remains a challenge for food manufacturers despite the increasing availability of diverse processing and formulation strategies used to control foodborne microorganisms. Physiological features of yeasts and molds contribute to their tolerance to thermal processing, acidity, desiccation, and oxygen and nutrient limitations. These features variably include growth form, cell wall structure, cytoplasmic composition, cell membrane-bound proteins, and secretion of secondary metabolites. Collectively, these mechanisms contribute to the ability of fungi to disperse, survive, and propagate in highly restrictive food environments. The diversity of fungal growth and survival mechanisms has resulted in organisms adapted to nearly all food environments; although, only a small subset of fungi are particularly suited for spoilage of a given product. The relationship between the individual physiology and metabolic capabilities of a yeast or mold and the product's specific physicochemical attributes and processing history determines spoilage potential. Explicit characterization of the fungal features responsible for this extremotolerance contributes to more targeted and effective control strategies.

Study of the Anti-Staphylococcal Potential of Honeys Produced in Northern Poland.

The antimicrobial activity of 144 samples of honeys including 95 products from apiaries located in Northern Poland was evaluated. The antibacterial activity of those natural products, their thermal stability, and activity in the presence of catalase was investigated by microdilution assays in titration plates. The MTT assay was performed for the determination of anti-biofilm activity. Spectrophotometric assays were used for the determination of antioxidant potential, total phenolic content, and ability to generate hydrogen peroxide. Some of the investigated honeys exhibited surprisingly high antimicrobial, especially anti-staphylococcal, potential, with Minimal Inhibitory Concentration (MIC) values of only 1.56% (v/v). Much higher resistance was observed in the case of staphylococci growing as biofilms. Lower concentrations of the product, up to 12.5% (v/v) stimulated its growth and effective eradication of biofilm required concentration of at least 25% (v/v). Hydrogen peroxide has been identified as a crucial contributor to the antimicrobial activity of honeys supplied by Polish beekeepers. However, some of the results suggest that phytochemicals, especially polyphenols, play an important role depending on botanical source (both positive, e.g., in the case of buckwheat honeys as well as negative, e.g., in the case of some rapeseed honeys) in their antimicrobial potential.

Isolation of Bacteriocin-producing Staphylococcus spp. Strains from Human Skin Wounds, Soft Tissue Infections and Bovine Mastitis.

A collection of 206 Staphylococcus spp. isolates was investigated for their ability to produce compounds exhibiting antistaphylococcal activity. This group included Staphylococcus aureus, Staphylococcus epidermidis, Staphylococcus xylosus strains recovered from bovine mastitis (n = 158) and human skin wounds and soft tissues infections (n = 48). Production of substances with antimicrobial activity was observed in six strains. Five of them were recovered from bovine mastitis, and one was isolated from the infected human skin wound. Three of the six antimicrobials produced by the different strains showed substantial loss of antimicrobial activity upon treatment with proteolytic enzymes, which suggests their peptidic structure. Additional studies have shown that one of the putative bacteriocins was efficiently secreted to the liquid medium, facilitating its large-scale production and isolation. The peptide produced by the M2B strain exhibited promising activity; however, against narrow spectrum of Staphylococcus spp. clinical and animal isolates. Growth inhibition was observed only in the case of 13 (including nine S. aureus, three S. xylosus and one S. epidermidis strains) out of 206 strains tested. Important advantage of the produced agent was its high thermal stability. Fifteen minutes of incubation at 90°C did not affect its antimicrobial potential. The highest efficiency of production of the agent was demonstrated in TSB medium after 24 hours at 37°C. The researches revealed that ability to production of bacteriocin among staphylococci is not very common. Only one (S. xylosus strain assigned as M2B) out of 206 strains tested produced satisfactory amounts of antistaphylococcal bacteriocin. In spite of that, we would encourage other researchers for investigation of their collections of Staphylococcus spp. isolates towards selection strains producing antimicrobial agents.

UV light inactivation of human and plant pathogens in unfiltered surface irrigation water.

Fruit and vegetable growers continually battle plant diseases and food safety concerns. Surface water is commonly used in the production of fruits and vegetables and can harbor both human- and plant-pathogenic microorganisms that can contaminate crops when used for irrigation or other agricultural purposes. Treatment methods for surface water are currently limited, and there is a need for suitable treatment options. A liquid-processing unit that uses UV light for the decontamination of turbid juices was analyzed for its efficacy in the treatment of surface waters contaminated with bacterial or oomycete pathogens, i.e., Escherichia coli, Salmonella enterica, Listeria monocytogenes, Clavibacter michiganensis subsp. michiganensis, Pseudomonas syringae pv. tomato, and Phytophthora capsici. Five-strain cocktails of each pathogen, containing approximately 10(8) or 10(9) CFU/liter for bacteria or 10(4) or 10(5) zoospores/liter for Ph. capsici, were inoculated into aliquots of two turbid surface water irrigation sources and processed with the UV unit. Pathogens were enumerated before and after treatment. In general, as the turbidity of the water source increased, the effectiveness of the UV treatment decreased, but in all cases, 99.9% or higher inactivation was achieved. Log reductions ranged from 10.0 to 6.1 and from 5.0 to 4.2 for bacterial pathogens and Ph. capsici, respectively.

Plant-pathogenic oomycetes, Escherichia coli strains, and Salmonella spp. Frequently found in surface water used for irrigation of fruit and vegetable crops in New York State.

In the United States, surface water is commonly used to irrigate a variety of produce crops and can harbor pathogens responsible for food-borne illnesses and plant diseases. Understanding when pathogens infest water sources is valuable information for produce growers to improve the food safety and production of these crops. In this study, prevalence data along with regression tree analyses were used to correlate water quality parameters (pH, temperature, turbidity), irrigation site properties (source, the presence of livestock or fowl nearby), and precipitation data to the presence and concentrations of Escherichia coli, Salmonella spp., and hymexazol-insensitive (HIS) oomycetes (Phytophthora and Pythium spp.) in New York State surface waters. A total of 123 samples from 18 sites across New York State were tested for E. coli and Salmonella spp., of which 33% and 43% were positive, respectively. Additionally, 210 samples from 38 sites were tested for HIS oomycetes, and 88% were found to be positive, with 10 species of Phytophthora and 11 species of Pythium being identified from the samples. Regression analysis found no strong correlations between water quality parameters, site factors, or precipitation to the presence or concentration of E. coli in irrigation sources. For Salmonella, precipitation (≤ 0.64 cm) 3 days before sampling was correlated to both presence and the highest counts. Analyses for oomycetes found creeks to have higher average counts than ponds, and higher turbidity levels were associated with higher oomycete counts. Overall, information gathered from this study can be used to better understand the food safety and plant pathogen risks of using surface water for irrigation.

Distributions of Salmonella subtypes differ between two U.S. produce-growing regions.

Salmonella accounts for approximately 50% of produce-associated outbreaks in the United States, several of which have been traced back to contamination in the produce production environment. To quantify Salmonella diversity and aid in identification of Salmonella contamination sources, we characterized Salmonella isolates from two geographically diverse produce-growing regions in the United States. Initially, we characterized the Salmonella serotype and subtype diversity associated with 1,677 samples collected from 33 produce farms in New York State (NYS). Among these 1,677 samples, 74 were Salmonella positive, yielding 80 unique isolates (from 147 total isolates), which represented 14 serovars and 23 different pulsed-field gel electrophoresis (PFGE) types. To explore regional Salmonella diversity associated with production environments, we collected a smaller set of samples (n = 65) from South Florida (SFL) production environments and compared the Salmonella diversity associated with these samples with the diversity found among NYS production environments. Among these 65 samples, 23 were Salmonella positive, yielding 32 unique isolates (from 81 total isolates), which represented 11 serovars and 17 different PFGE types. The most common serovars isolated in NYS were Salmonella enterica serovars Newport, Cerro, and Thompson, while common serovars isolated in SFL were Salmonella serovars Saphra and Newport and S. enterica subsp. diarizonae serovar 50:r:z. High PFGE type diversity (Simpson's diversity index, 0.90 ± 0.02) was observed among Salmonella isolates across both regions; only three PFGE types were shared between the two regions. The probability of three or fewer shared PFGE types was <0.000001; therefore, Salmonella isolates were considerably different between the two sampled regions. These findings suggest the potential for PFGE-based source tracking of Salmonella in production environments.

Development of a homologous expression system for and systematic site-directed mutagenesis analysis of thurincin H, a bacteriocin produced by Bacillus thuringiensis SF361.

Thurincin H is an antimicrobial peptide produced by Bacillus thuringiensis SF361. With a helical back bone, the 31 amino acids of thurincin H form a hairpin structure maintained by four pairs of very unique sulfur-to-α-carbon thioether bonds. The production of thurincin H depends on a putative gene cluster containing 10 open reading frames. The gene cluster includes three tandem structural genes (thnA1, thnA2, and thnA3) encoding three identical 40-amino-acid thurincin H prepeptides and seven other genes putatively responsible for prepeptide processing, regulation, modification, exportation, and self-immunity. A homologous thurincin H expression system was developed by transforming a thurincin H-deficient host with a novel expression vector, pGW133. The host, designated B. thuringiensis SF361 ΔthnA1 ΔthnA2 ΔthnA3, was constructed by deletion of the three tandem structural genes from the chromosome of the natural thurincin H producer. The thurincin H expression vector pGW133 was constructed by cloning the thurincin H native promoter, thnA1, and a Cry protein terminator into the Escherichia coli-B. thuringiensis shuttle vector pHT315. Thirty-three different pGW133 variants, each containing a different point mutation in the thnA1 gene, were generated and separately transformed into B. thuringiensis SF361 ΔthnA1 ΔthnA2 ΔthnA3. Those site-directed mutants contained either a single radical or conservative amino acid substitution on the thioether linkage-forming positions or a radical substitution on all other nonalanine amino acids. The bacteriocin activities of B. thuringiensis SF361 ΔthnA1 ΔthnA2 ΔthnA3 carrying different pGW133 variants against three different indicator strains were subsequently compared.

Alumina surfaces with nanoscale topography reduce attachment and biofilm formation by Escherichia coli and Listeria spp.

This work reports on a simple, robust and scientifically sound method to develop surfaces able to reduce microbial attachment and biofilm development, with possible applications in medicine, dentistry, food processing, or water treatment. Anodic surfaces with cylindrical nanopores 15 to 100 nm in diameter were manufactured and incubated with Escherichia coli ATCC 25922 and Listeria innocua. Surfaces with 15 and 25 nm pore diameters significantly repressed attachment and biofilm formation. Surface-bacteria interaction forces calculated using the extended Derjaguin Landau Verwey-Overbeek (XDLVO) theory indicate that reduction in attachment and biofilm formation is due to a synergy between electrostatic repulsion and surface effective free energy. An attachment study using E. coli K12 strains unable to express appendages also suggests that the small-pore surfaces may inhibit flagella-dependent attachment. These results can have immediate, far-reaching implications and commercial applications, with substantial benefits for human health and life.

Chemical and genetic characterization of bacteriocins: antimicrobial peptides for food safety.

Antimicrobial peptides are produced across all domains of life. Among these diverse compounds, those produced by bacteria have been most successfully applied as agents of biocontrol in food and agriculture. Bacteriocins are ribosomally synthesized, proteinaceous compounds that inhibit the growth of closely related bacteria. Even within the subcategory of bacteriocins, the peptides vary significantly in terms of the gene cluster responsible for expression, and chemical and structural composition. The polycistronic gene cluster generally includes a structural gene and various combinations of immunity, secretion, and regulatory genes and modifying enzymes. Chemical variation can exist in amino acid identity, chain length, secondary and tertiary structural features, as well as specificity of active sites. This diversity posits bacteriocins as potential antimicrobial agents with a range of functions and applications. Those produced by food-grade bacteria and applied in normally occurring concentrations can be used as GRAS-status food additives. However, successful application requires thorough characterization.

Potency of Dimethyl Dicarbonate on the Microbial Inhibition Growth Kinetics, and Quality of Passion Fruit (Passiflora edulis) Juice during Refrigerated Storage.

This study aimed to investigate the effectiveness of dimethyl dicarbonate (DMDC) at various concentrations (0-250 ppm) in inhibiting the growth of Escherichia coli TISTR 117 and spoilage microbes in passion fruit juice (PFJ) and its impact on the physicochemical and antioxidant quality of the juice during refrigerated storage. The highest log reduction in the total viable count, yeast/molds and E. coli was attained in PFJ samples with 250 ppm of DMDC (p ≤ 0.05) added. Microbial growth inhibition by DMDC followed the first-order kinetic model with a coefficient of determination (R2) and inhibition constants (k) ranging from 0.98 to 0.99 and 0.022 to 0.042, respectively. DMDC at 0-250 ppm showed an insignificant effect on pH, °Brix, color (L*, a*, b*), ascorbic acid, total phenolic compound (TPC), total flavonoid content, and antioxidant activity (DPPH, FRAP) (p > 0.05). Control (untreated PFJ), DMDC-250 ppm, and pasteurized (15 s at 72 °C) samples were subjected to 27 days of cold storage at 4 °C. A decreasing trend in pH, total soluble solid, ascorbic acid content, DPPH and FRAP values were observed in all the samples during refrigerated storage. However, the DMDC-250 ppm sample showed a better prospect in physicochemical quality changes compared to the pasteurized and untreated control PFJ samples. ΔE values showed marked changes in the control sample than the DMDC-250 ppm and pasteurized samples at 27 days of storage. Additionally, the total viable count and yeast/mold count were augmented during storage, and an estimated shelf-life of the control, DMDC-250 ppm, and pasteurized samples was approximately 3, 24 and 18 days, respectively. In conclusion, DMDC at 250 ppm could ensure microbial safety without affecting the quality attributes of PFJ during 24 days of storage at 4 °C.

Effect of micro- and nanoscale topography on the adhesion of bacterial cells to solid surfaces.

Attachment and biofilm formation by bacterial pathogens on surfaces in natural, industrial, and hospital settings lead to infections and illnesses and even death. Minimizing bacterial attachment to surfaces using controlled topography could reduce the spreading of pathogens and, thus, the incidence of illnesses and subsequent human and financial losses. In this context, the attachment of key microorganisms, including Escherichia coli, Listeria innocua, and Pseudomonas fluorescens, to silica and alumina surfaces with micron and nanoscale topography was investigated. The results suggest that orientation of the attached cells occurs preferentially such as to maximize their contact area with the surface. Moreover, the bacterial cells exhibited different morphologies, including different number and size of cellular appendages, depending on the topographical details of the surface to which they attached. This suggests that bacteria may utilize different mechanisms of attachment in response to surface topography. These results are important for the design of novel microbe-repellant materials.

Risk factors associated with Salmonella and Listeria monocytogenes contamination of produce fields.

Identification of management practices associated with preharvest pathogen contamination of produce fields is crucial to the development of effective Good Agricultural Practices (GAPs). A cross-sectional study was conducted to (i) determine management practices associated with a Salmonella- or Listeria monocytogenes-positive field and (ii) quantify the frequency of these pathogens in irrigation and nonirrigation water sources. Over 5 weeks, 21 produce farms in New York State were visited. Field-level management practices were recorded for 263 fields, and 600 environmental samples (soil, drag swab, and water) were collected and analyzed for Salmonella and L. monocytogenes. Management practices were evaluated for their association with the presence of a pathogen-positive field. Salmonella and L. monocytogenes were detected in 6.1% and 17.5% of fields (n = 263) and 11% and 30% of water samples (n = 74), respectively. The majority of pathogen-positive water samples were from nonirrigation surface water sources. Multivariate analysis showed that manure application within a year increased the odds of a Salmonella-positive field (odds ratio [OR], 16.7), while the presence of a buffer zone had a protective effect (OR, 0.1). Irrigation (within 3 days of sample collection) (OR, 6.0), reported wildlife observation (within 3 days of sample collection) (OR, 6.1), and soil cultivation (within 7 days of sample collection) (OR, 2.9) all increased the likelihood of an L. monocytogenes-positive field. Our findings provide new data that will assist growers with science-based evaluation of their current GAPs and implementation of preventive controls that reduce the risk of preharvest contamination.

Landscape and meteorological factors affecting prevalence of three food-borne pathogens in fruit and vegetable farms.

Produce-related outbreaks have been traced back to the preharvest environment. A longitudinal study was conducted on five farms in New York State to characterize the prevalence, persistence, and diversity of food-borne pathogens in fresh produce fields and to determine landscape and meteorological factors that predict their presence. Produce fields were sampled four times per year for 2 years. A total of 588 samples were analyzed for Listeria monocytogenes, Salmonella, and Shiga toxin-producing Escherichia coli (STEC). The prevalence measures of L. monocytogenes, Salmonella, and STEC were 15.0, 4.6, and 2.7%, respectively. L. monocytogenes and Salmonella were detected more frequently in water samples, while STEC was detected with equal frequency across all sample types (soil, water, feces, and drag swabs). L. monocytogenes sigB gene allelic types 57, 58, and 61 and Salmonella enterica serovar Cerro were repeatedly isolated from water samples. Soil available water storage (AWS), temperature, and proximity to three land cover classes (water, roads and urban development, and pasture/hay grass) influenced the likelihood of detecting L. monocytogenes. Drainage class, AWS, and precipitation were identified as important factors in Salmonella detection. This information was used in a geographic information system framework to hypothesize locations of environmental reservoirs where the prevalence of food-borne pathogens may be elevated. The map indicated that not all croplands are equally likely to contain environmental reservoirs of L. monocytogenes. These findings advance recommendations to minimize the risk of preharvest contamination by enhancing models of the environmental constraints on the survival and persistence of food-borne pathogens in fields.

Foodborne pathogen inactivation in fruit juices utilizing commercial scale high-pressure processing: Effects of acidulants and pH.

The effects of juice pH, type of acidulant, and post-treatment refrigeration on the high-pressure processing (HPP) inactivation of Escherichia coli O157:H7, Salmonella enterica, and Listeria monocytogenes in acid beverages were evaluated. Inoculated apple, orange, and grape juices (at their original pH and adjusted to pH 4.00, 4.50, and 5.00) were treated at 550 MPa for 1 min at 5 °C. In addition, inoculated model solutions acidified to a pH of 5.00 with acetic, citric, malic, and tartaric acids were treated at 400 MPa for 1 min at 5 °C. The effect of refrigerated storage for 24 h after treatment on pathogen inactivation in both experiments was also assessed. A greater than 5-log reduction of the three pathogens inoculated was achieved in all juices immediately after HPP at the juices' original pH, and of L. monocytogenes under all experimental conditions. Refrigerated storage for 24 h after HPP treatment improved the inactivation of E. coli O157:H7, to >5-log reduction, at pH 4.00 in apple juice and of Salmonella in the three juices at pH 4.00. The type of acidulant did not significantly (p > 0.01) affect E. coli or Salmonella inactivation in acidified model solutions but a greater than 5-log reduction after HPP was only achieved for L. monocytogenes when acetic acid was used. The effectiveness of HPP for pathogen inactivation depended largely on product pH and the target pathogen of concern.

Probiotic potential of Bacillus Isolates from Polish Bee Pollen and Bee Bread.

The main goal of this study was the evaluation of the probiotic potential of 10 Bacillus spp. strains isolated from 5 bee bread and 3 bee pollen samples. The antagonistic interaction with Staphylococcus aureus and Escherichia coli was a primary criterion for the preliminary selection of the isolates. Three out of ten strains-PY2.3 (isolated from pollen), BP20.15 and BB10.1 (both isolated from bee bread)-were found to be possible probiotic strains. All these strains are safe for humans (exhibiting [Formula: see text]-hemolytic activity) and meet all essential requirements for probiotics in terms of viability in the presence of bile salts and acid conditions, hydrophobicity, auto-aggregation, and co-aggregation with the cells of important human pathogenic bacteria. They also assimilate more than 30% of cholesterol after 24 h of incubation. These three isolates are resistant to penicillin but sensitive (or exhibit moderate resistance) to the other nine antibiotics tested herein. On the basis of whole-genome sequencing, BP20.15 and BB10.1 were classified as B. subtilis and PY2.3 as B. velezensis. Moreover, genomic analyses revealed that all these isolates are potential producers of different antimicrobial compounds, including bacteriocins and secondary metabolites. The outcomes of this study have proven that some of the Bacillus strains isolated from bee pollen or bee bread are potential probiotics.

Microbial Inhibition by UV Radiation Combined with Nisin and Shelf-Life Extension of Tangerine Juice during Refrigerated Storage.

This study evaluated the efficiency of UV radiation doses (4.68-149.76 J/cm2) and nisin (50-200 ppm) and their combination in comparison with thermal pasteurization on the microbial inhibition kinetics and physicochemical properties of tangerine juice. It was noted that UV-149.76 J/cm2 and nisin (NS) at 200 ppm in conjunction exhibited the highest log reduction in spoilage and pathogenic microbes including Escherichia coli, Lactiplantibacillus plantarum, and Saccharomyces cerevisiae, yeast and molds, and total plate count in tangerine juice. Additionally, the first-order kinetic model provides a better fit for spoilage and pathogenic strains compared with the zero-order model (higher coefficient of determination, R2), particularly for E. coli. UV and NS showed insignificant effects (p > 0.05) on pH, TSS, and TA values compared with pasteurization. However, there were notable differences observed in color analysis, total phenolic compound, total flavonoid content, vitamin C, carotenoid content, and antioxidant activity using DPPH and FRAP assays. The optimized UV + NS samples were subjected to refrigerated storage for 21 days. The results revealed that during the entire storage period, the pH values and the TSS values slightly decreased, and the TA values increased in the treated samples. The UV + NS treatment insignificantly impacted the color properties. The total phenolic, total flavonoid, and carotenoid contents, and vitamin C decreased over time for all sample treatments, whereas the antioxidant properties exhibited varying outcomes, compared with an untreated control and pasteurization. Therefore, UV radiation and nisin (UV-149.76 J/cm2 + NS-200 ppm) in combination could serve as a viable alternative to traditional heat pasteurization of fruit juice during cold storage.

Ultrasound-Assisted Extraction of Bioactive Compounds from Cocoa Shell and Their Encapsulation in Gum Arabic and Maltodextrin: A Technology to Produce Functional Food Ingredients.

In this study, the extraction of cocoa shell powder (CSP) was optimized, and the optimized extracts were spray-dried for encapsulation purposes. Temperature (45−65 °C), extraction time (30−60 min), and ethanol concentration (60−100%) were the extraction parameters. The response surface methodology analysis revealed that the model was significant (p ≤ 0.05) in interactions between all variables (total phenolic compound, total flavonoid content, and antioxidant activity as measured by 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and ferric reducing antioxidant power (FRAP assays), with a lack of fit test for the model being insignificant (p > 0.05). Temperature (55 °C), time (45 min), and ethanol concentration (60%) were found to be the optimal extraction conditions. For spray-drying encapsulation, some quality metrics (e.g., water solubility, water activity) were insignificant (p > 0.05). The microcapsules were found to be spherical in shape using a scanning electron microscope. Thermogravimetric and differential thermogravimetric measurements of the microcapsules revealed nearly identical results. The gum arabic + maltodextrin microcapsule (GMM) showed potential antibacterial (zone of inhibition: 11.50 mm; lower minimum inhibitory concentration: 1.50 mg/mL) and antioxidant (DPPH: 1063 mM trolox/100g dry wt.) activities (p ≤ 0.05). In conclusion, the microcapsules in this study, particularly GMM, are promising antioxidant and antibacterial agents to be fortified as functional food ingredients for the production of nutraceutical foods with health-promoting properties.