Superconducting transition edge bolometer for high-flux neutron detection.

Needs for neutron detection and monitoring in high neutron flux environments are increasing in several different fields. A completely solid-state, current mode bolometric detector is constructed as a solid substrate transition edge sensor based on a high-T[Formula: see text] superconducting meander. The detector consists of four individual pixels of which three pixels include [Formula: see text] neutron absorption layers. The absorbed energy per neutron absorption reaction is modelled and compared to experimental data. The response of the tested detector is directly correlated to a cold neutron beam with a flux of [Formula: see text] modulated by a slit. The signal is found to be an order of magnitude higher than the thermal background. The dynamics described by the temporal saturation constants is governed by a modulation frequency less than [Formula: see text]. The thermal response is dynamic and never fully saturates for [Formula: see text] exposures. The efficiency for this proof-of-principle design is 1-2%. Possibilities for optimization are identified, that will increase the efficiency to become comparable to existing solid boron-10 detectors. The existing detectors with event-based read-out have limited functionality in high flux environments. The superconducting bolometer described in this work using current-mode readout will pave the way for high flux applications.

Production of a monolithic fuel cell stack with high power density.

The transportation sector is undergoing a technology shift from internal combustion engines to electric motors powered by secondary Li-based batteries. However, the limited range and long charging times of Li-ion batteries still hinder widespread adoption. This aspect is particularly true in the case of heavy freight and long-range transportation, where solid oxide fuel cells (SOFCs) offer an attractive alternative as they can provide high-efficiency and flexible fuel choices. However, the SOFC technology is mainly used for stationary applications owing to the high operating temperature, low volumetric power density and specific power, and poor robustness towards thermal cycling and mechanical vibrations of conventional ceramic-based cells. Here, we present a metal-based monolithic fuel cell design to overcome these issues. Cost-effective and scalable manufacturing processes are employed for fabrication, and only a single heat treatment is required, as opposed to multiple thermal treatments in conventional SOFC production. The design is optimised through three-dimensional multiphysics modelling, nanoparticle infiltration, and corrosion-mitigating treatments. The monolithic fuel cell stack shows a power density of 5.6 kW/L, thus, demonstrating the potential of SOFC technology for transport applications.