Regulation mechanism and bioactivity characteristic of surfactin homologues with C14 and C15 fatty acid chains.

BACKGROUND: Surfactin, a green lipopeptide bio-surfactant, exhibits excellent surface, hemolytic, antibacterial, and emulsifying activities. However, a lack of clear understanding of the synthesis regulation mechanism of surfactin homologue components has hindered the customized production of surfactin products with different biological activities. RESULTS: In this study, exogenous valine and 2-methylbutyric acid supplementation significantly facilitated the production of C14-C15 surfactin proportions (up to 75% or more), with a positive correlation between the homologue proportion and fortified concentration. Subsequently, the branched-chain amino acid degradation pathway and the glutamate synthesis pathway are identified as critical pathways in regulating C14-C15 surfactin synthesis by transcriptome analysis. Overexpression of genes bkdAB and glnA resulted in a 1.4-fold and 1.3-fold increase in C14 surfactin, respectively. Finally, the C14-rich surfactin was observed to significantly enhance emulsification activity, achieving an EI24 exceeding 60% against hexadecane, while simultaneously reducing hemolytic activity. Conversely, the C15-rich surfactin demonstrated an increase in both hemolytic and antibacterial activities. CONCLUSION: This study presents the first evidence of a potential connection between surfactin homologue synthesis and the conversion of glutamate and glutamine, providing a theoretical basis for targeting the synthesis regulation and structure-activity relationships of surfactin and other lipopeptide compounds.

Preparation, Characterization, and Antioxidant Activities of Extracts from Amygdalus persica L. Flowers.

A novel water-soluble Amygdalus persica L. flowers polysaccharide (APL) was successfully isolated and purified from Amygdalus persica L. flowers by hot water extraction. Its chemical components and structure were analyzed by IR, GC-MS, and HPLC. APL consisted of rhamnose, arabinose, mannose and glucose in a molar ratio of 0.17:0.034:1.0:0.17 with an average molecular weight of approximately 208.53 kDa and 15.19 kDa. The antioxidant activity of APL was evaluated through radical scavenging assays using 1,1-diphenyl-2-picrylhydrazyl (DPPH), 3-ethylbenzthiazoline-6-sulfonic acid (ABTS), Hydroxyl radical scavenging, Superoxide radical scavenging, and the reducing power activity was also determined in vitro. Besides, in vivo antioxidant experiment, zebrafish (Danio rerio) embryos were treated with different concentrations of APL and then exposed to LPS to induce oxidative stress. Treatment with APL at 50 or 100 µg/mL significantly reduced LPS-induced oxidative stress in the zebrafish, demonstrating the strong antioxidant activity of APL. Moreover, the effect of APL on zebrafish depigmentation was tested by analyzing the tyrosinase activity and melanin content of zebrafish embryos. APL showed a potential reduction in the total melanin content and tyrosinase activity after treatment. This work provided important information for developing a potential natural antioxidant in the field of cosmetics and food.

Inside Out Computational Redesign of Cavities for Improving Thermostability and Catalytic Activity of Rhizomucor Miehei Lipase.

Cavities are created by hydrophobic interactions between residue side chain atoms during the folding of enzymes. Redesigning cavities can improve the thermostability and catalytic activity of the enzyme; however, the synergistic effect of cavities remains unclear. In this study, Rhizomucor miehei lipase (RML) was used as a model to explore volume fluctuation and spatial distribution changes of the internal cavities, which could reveal the roles of internal cavities in the thermostability and catalytic activity. We present an inside out cavity engineering (CE) strategy based on computational techniques to explore how changes in the volumes and spatial distribution of cavities affect the thermostability and catalytic activity of the enzyme. We obtained 12 single-point mutants, among which the melting temperatures (Tm) of 8 mutants showed an increase of more than 2°C. Sixteen multipoint mutations were further designed by spatial distribution rearrangement of internal cavities. The Tm of the most stable triple variant, with mutations including T21V (a change of T to V at position 21), S27A, and T198L (T21V/S27A/T198L), was elevated by 11.0°C, together with a 28.7-fold increase in the half-life at 65°C and a specific activity increase of 9.9-fold (up to 5,828 U mg-1), one of the highest lipase activities reported. The possible mechanism of decreased volumes and spatial rearrangement of the internal cavities improved the stability of the enzyme, optimizing the outer substrate tunnel to improve the catalytic efficiency. Overall, the inside out computational redesign of cavities method could help to deeply understand the effect of cavities on enzymatic stability and activity, which would be beneficial for protein engineering efforts to optimize natural enzymes. IMPORTANCE In the present study, R. miehei lipase, which is widely used in various industries, provides an opportunity to explore the effects of internal cavities on the thermostability and catalytic activity of enzymes. Here, we execute high hydrostatic pressure molecular dynamics (HP-MD) simulations to screen the critical internal cavity and reshape the internal cavities through site-directed mutation. We show that as the global internal cavity volume decreases, cavity rearrangement can improve the stability of the protein while optimizing the substrate channel to improve the catalytic efficiency. Our results provide significant insights into understanding the mechanism of action of the internal cavity. Our strategy is expected to be applied to other enzymes to promote increases in thermostability and catalytic activity.

Ecological succession and functional characteristics of lactic acid bacteria in traditional fermented foods.

Fermented foods are important parts of traditional food culture with a long history worldwide. Abundant nutritional materials and open fermentation contribute to the diversity of microorganisms, resulting in unique product quality and flavor. Lactic acid bacteria (LAB), as important part of traditional fermented foods, play a decisive role in the quality and safety of fermented foods. Reproduction and metabolic of microorganisms drive the food fermentation, and microbial interaction plays a major role in the fermentation process. Nowadays, LAB have attracted considerable interest due to their potentialities to add functional properties to certain foods or as supplements along with the research of gut microbiome. This review focuses on the characteristics of diversity and variability of LAB in traditional fermented foods, and describes the principal mechanisms involved in the flavor formation dominated by LAB. Moreover, microbial interactions and their mechanisms in fermented foods are presented. They provide a theoretical basis for exploiting LAB in fermented foods and improving the quality of traditional fermented foods. The traditional fermented food industry should face the challenge of equipment automation, green manufacturing, and quality control and safety in the production.

Behavior of enzymes under high pressure in food processing: mechanisms, applications, and developments.

High pressure processing (HPP) offers the benefits of safety, uniformity, energy-efficient, and low waste, which is widely applied for microbial inactivation and shelf-life extension for foods. Over the past forty years, HPP has been extensively researched in the food industry, enabling the inactivation or activation of different enzymes in future food by altering their molecular structure and active site conformation. Such activation or inactivation of enzymes effectively hinders the spoilage of food and the production of beneficial substances, which is crucial for improving food quality. This paper reviews the mechanism in which high pressure affects the stability and activity of enzymes, concludes the roles of key enzymes in the future food processed using high pressure technologies. Moreover, we discuss the application of modified enzymes based on high pressure, providing insights into the future direction of enzyme evolution under complex food processing conditions (e.g. high temperature, high pressure, high shear, and multiple elements). Finally, we conclude with prospects of high pressure technology and research directions in the future. Although HPP has shown positive effects in improving the future food quality, there is still a pressing need to develop new and effective combined processing methods, upgrade processing modes, and promote sustainable lifestyles.

Bacterial metabolic engineering for the production of second-generation (2 G) bioethanol and biobutanol; a review.

The second generation (2 G) biofuels were introduced to solve the issues associated with first-generation biofuel (dependency on food materials) and fossil fuels, such as reservoirs diminution, high demand, price fluctuation, and lethal greenhouse gases emission. Butanol and ethanol are the main 2 G biofuels. They are used as a disinfectant, antiseptic, and chemical solvent in the pharmaceutical, plastic, textiles, cosmetics, and fuel industries. Currently, their bacterial biological production from lignocellulosic material at the industrial level with primitive microorganisms is under development and not economical and qualitative compatible as compared to that of fossil origin, due to the slow growth rate, low titer, recalcitrant nature of lignocellulose, strain intolerance to a higher amount of butanol and ethanol, and strain inability to tolerate inhibitors accumulated during pretreatment of lignocellulosic materials. Therefore, metabolic engineering strategies such as redirection of carbon flux, knocking out competing pathways, enhancing strain robustness and wide range of substrate utilization ability, and overexpression of enzymes involved in their biological synthesis have been applied to bacteria for enhancing their ability for 2 G ethanol and butanol production in a highly cost-effective amount from lignocellulosic materials. Herein, we summarized and reviewed the progress in metabolic engineering of bacterial species such as Clostridium spp,Escherichia coli, and Zymomonas mobilis for the synthesis of 2 G butanol and ethanol, especially from lignocellulosic materials.

Redesign of γ-glutamyl transpeptidase from Bacillus subtilis for high-level production of L-theanine by cavity topology engineering.

L-Theanine is a multifunctional nonprotein amino acid found naturally in tea leaves. It has been developed as a commercial product for a wide range of applications in the food, pharmaceutical, and healthcare industries. However, L-theanine production catalyzed by γ-glutamyl transpeptidase (GGT) is limited by the low catalytic efficiency and specificity of this class of enzymes. Here, we developed a strategy for cavity topology engineering (CTE) based on the cavity geometry of GGT from B. subtilis 168 (CGMCC 1.1390) to obtain an enzyme with high catalytic activity and applied it to the synthesis of L-theanine. Three potential mutation sites, M97, Y418, and V555, were identified using the internal cavity as a probe, and residues G, A, V, F, Y, and Q, which may affect the shape of the cavity, were obtained directly by computer statistical analysis without energy calculations. Finally, 35 mutants were obtained. The optimal mutant Y418F/M97Q showed a 4.8-fold improvement in catalytic activity and a 25.6-fold increase in catalytic efficiency. The recombinant enzyme Y418F/M97Q exhibited a high space-time productivity of 15.4 g L-1 h-1 by whole-cell synthesis in a 5 L bioreactor, which was one of the highest concentrations reported so far at 92.4 g L-1. Overall, this strategy is expected to enhance the enzymatic activity associated with the synthesis of L-theanine and its derivatives.Key points • Cavity topology engineering was used to modify the GGT for L-theanine biocatalysis. • The catalytic efficiency of GGT was increased by 25.6-fold. • Highest productivity of L-theanine reached 15.4 g L -1 h-1 (92.4 g L-1) in a 5 L bioreactor.

Patterns of biogenic amine during broad bean paste fermentation: microbial diversity and functionality via Bacillus bioaugmentation.

BACKGROUND: Broad bean paste is a high nitrogen and high salt traditional Chinese condiment, which triggers biosynthesis of nitrogen hazards like biogenic amines (BAs). Mechanisms of association and applied research of functional safety and community assembly within multiple-microbial fermentation are currently lacking. Here, bioaugmentation was performed based on the profiles of BAs accumulation and microbial succession to evaluate the functional variation within broad bean paste fermentation. RESULTS: Putrescine, spermine, and spermidine were the main BAs during traditional broad bean paste fermentation. Staphylococcus, Streptococcus, Lactococcus, Lactobacillus, Leuconostoc, and Bacillus were the predominant bacteria, whereas Aspergillus and Zygosaccharomyces dominated in fungal species, and community structure shifted upon salt exposure. PICRUSt software uncovered that Bacillus contributed significantly (>1%) to the amine oxidase gene family. Bacillus amyloliquefaciens 1-G6 and Bacillus licheniformis 2-B3 were screened to perform the bioaugmentation of broad bean paste, which achieved a 29% and 16% BA decrease respectively. Interaction network analysis showed that Cronobacter and Lactobacillus were significantly negatively correlated with Bacillus (ρ = -0.829 and ρ = -0.714, respectively, P < 0.05) in the B. amyloliquefaciens 1-G6 group, and Staphylococcus and Buttiauxella were inhibited by Bacillus (ρ = -0.657 and ρ = -0.543, respectively, P < 0.05) in the B. licheniformis 2-B3 group. CONCLUSION: The synergism of amine oxidase activity and microbial interactions led to the decline of BAs. Thus, this study improves our understanding of the underlying mechanisms of microbial succession and functional variation to further facilitate the optimization of the fermented food industry.

Mitigation of microbial nitrogen-derived metabolic hazards as a driver for safer alcoholic beverage choices: An evidence-based review and future perspectives.

Alcoholic beverages have been enjoyed worldwide as hedonistic commodities for thousands of years. The unique quality and flavor are attributed to the rich microbiota and nutritional materials involved in fermentation. However, the metabolism of these microbiota can also introduce toxic compounds into foods. Nitrogen-derived metabolic hazards (NMH) are toxic metabolic hazards produced by microorganisms metabolizing nitrogen sources that can contaminate alcoholic beverages during fermentation and processing. NMH contamination poses a risk to dietary safety and human health without effective preventive strategies. Existing literature has primarily focused on investigating the causes of NMH formation, detection methods, and abatement techniques for NMH in fermentation end-products. Devising effective process regulation strategies represents a major challenge for the alcoholic beverage industry considering our current lack of understanding regarding the processes whereby NMH are generated, real-time and online detection, and the high degradation rate after NMH formation. This review summarizes the types and mechanisms of nitrogenous hazard contamination, the potential risk points, and the analytical techniques to detect NMH contamination. We discussed the changing patterns of NMH contamination and effective strategies to prevent contamination at different stages in the production of alcoholic beverages. Moreover, we also discussed the advanced technologies and methods to control NMH contamination in alcoholic beverages based on intelligent monitoring, synthetic ecology, and computational assistance. Overall, this review highlights the risks of NMH contamination during alcoholic beverage production and proposes promising strategies that could be adopted to eliminate the risk of NMH contamination.

Primary and Secondary Succession Mediate the Accumulation of Biogenic Amines during Industrial Semidry Chinese Rice Wine Fermentation.

The use of exogenous functional microorganisms to regulate biogenic amine (BA) content is a common approach in fermentation systems. Here, to better understand the microbial traits of succession trajectories in resource-based and biotic interference systems, the BA-related primary and secondary succession were tracked during industrial semidry Chinese rice wine (CRW) fermentation. Dominant abundance and BA-associated microbial functionality based on phylogenetic investigation of communities by reconstruction of unobserved states (PICRUSt) indicated that Citrobacter, Acinetobacter, Lactobacillus, Exiguobacterium, Bacillus, Pseudomonas, and Enterobacter spp. prominently contributed to the decarboxylase gene family in CRW. The expression levels of tyrosine decarboxylase (tyrDC), ornithine decarboxylase (odc), and agmatine deiminase (aguA) genes were assessed by quantitative PCR (qPCR). The transcription levels of these genes did not correlate with the BA formation rate during postfermentation, indicating that acidification and carbon source depletion upregulated the expression and microbes launch the dormancy strategy to respond to unfavorable conditions. Furthermore, microbial interference with CRW fermentation by Lactobacillus plantarum (ACBC271) and Staphylococcus xylosus (CGMCC1.8382) coinoculated at a ratio of 1:2 exhibited the best synergetic control of BA content. Spearman correlations revealed that Lactobacillus and Staphylococcus exhibited influence on BA-associated microbiota (|ρ| > 0), Exiguobacterium and Pseudomonas were strongly suppressed by Lactobacillus (ρ = -0.867 and ρ = -0.782, respectively; P < 0.05), and Staphylococcus showed the strongest inhibitory effect toward Lactobacillus (ρ = -0.115) and Citrobacter (ρ = -0.188) in the coinoculated 1:2 group. The high inhibitory effect of exogenous added strains on specific bacteria presented evidence for the obtained BA-associated contributors. Overall, this work provides important insight into the microbial traits that rely on resource usage and functional microbiota within food microbial ecology.IMPORTANCE Understanding the shifting patterns of substance usage and microbial interactions is a fundamental objective within microbiology and ecology. Analyses of primary and secondary microbial succession allow for determinations of taxonomic diversity, community traits, and functional transformations over time or after a disturbance. The kinetics of BA generation and the patterns of resource consumption, functional metagenome prediction, and microbial interactions were profiled to elucidate the equilibrium mechanism of microbial systems. Secondary succession after a disturbance triggers a change in resource usage, which in turn affects primary succession and metabolism. In this study, the functional potential of exogenous microorganisms under disturbance synergized with secondary succession strategies, including rebalancing and dormancy, which ultimately reduced BA accumulation. Thus, this succession system could facilitate the settling of essential issues with respect to microbial traits that rely on resource usage and microbial interactions that occur in natural ecosystems.

Metabolic engineering to improve the biomanufacturing efficiency of acetic acid bacteria: advances and prospects.

With the high tolerance for acetic acid and abundant multifunctional enzymes, acetic acid bacteria (AAB), as valuable biocatalysts, exhibit great advantages during industrial acetic acid production and value-added chemical fermentation. However, low biomass and a low production rates arising from acid stress remains major hurdles in industrial processes. Engineering AAB with excellent properties is expected to obtain economically viable production and facilitates their biotechnological applications. Here, the investigation of acetic acid-tolerance mechanisms and metabolic features is discussed, and effective targets are provided for the metabolic engineering of AAB. Next, we review the advances in improving AAB and compare these advances with improvement to other model acid-tolerant microorganisms. Furthermore, future directions involving the combination of systems biology and synthetic biology to achieve efficient biomanufacturing in AAB are highlighted.

Bioproduction, purification, and application of polysialic acid.

Polysialic acid (PSA) is a negatively charged linear homopolymer linked by N-acetylneuraminic acid and widely present in vertebrates and some pathogens. PSA, commonly found on cell surfaces as glycoproteins and glycolipids, plays important roles in intercellular adhesion, cell migration, and formation and remodeling of the neural system by regulating the adhesive property of nerve cell adhesion molecules. PSA with a molecular weight that can reach as high as 260 kDa also belongs to the group II capsule polysaccharide of neonatal meningitis-causing Escherichia coli K1. To date, much effort has been devoted to developing the biotechnological production of PSA. As a non-glycosaminoglycan, PSA is a non-immunogenic and biodegradable polysaccharide that can be used as a biomaterial in protein polysialylation, tissue engineering, and drug delivery. PSA can also combine with other macromolecules to form multifunctional composites. In this mini-review, the production, purification, and application of PSA are summarized to provide a basis for further PSA applications.

Thermal inactivation of xanthine oxidase from Arthrobacter M3: mechanism and the corresponding thermostabilization strategy.

The mechanism of thermal inactivation about xanthine oxidase (XOD) from Arthrobacter M3 was investigated. Results of reducing SDS-PAGE indicated that the inactivation of XOD was not related to the peptide degradation. Meanwhile, fluorimetry and circular dichroism spectroscopy suggested that XOD inactivation might be associated with the exposure of hydrophobic residues to surface and partial loss of secondary structure. Specific formation of soluble aggregates of XOD was detected by size exclusion chromatography. In addition, the thermal-dynamic analysis showed that the inactivation kinetics of XOD followed the first-order model. Therefore, trehalose (cosolute) and betaine (osmolyte) were accordingly employed to attenuate the inactivation of this enzyme. The results associated with these two reagents further confirmed that the loss of XOD activity was mainly due to the exposure of hydrophobic residues and formation of aggregation. Owing to the added trehalose and betaine, half-life could be significantly increased, and the inactivation rate constant (k) was detected as decreased.

[Physiological response to acetic acid stress of Acetobacter pasteuranus during vinegar fermentation].

OBJECTIVE: The aim of the study is to propose a dynamic acetic acid resistance mechanism through analysis on response of cellular morphology, physiology and metabolism of A. pasteurianus CICIM B7003 during vinegar fermentation. METHODS: Vinegar fermentation was carried out in a Frings 9 L acetator by strain B7003 and cultures were sampled at different cellular growth phases. Simultaneously, percentage of capsular polysaccharide versus dry cells weight, ratio of unsaturated fatty acids to saturated fatty acids, transcription of acetic acid resistance genes, activity of alcohol respiratory chain enzymes and ATPase were detected for these samples to assay the responses of bacterial morphology, physiology and metabolism. RESULTS: When acetic acid was existed, no obvious capsular polysaccharide was secreted by cells. As vinegar fermentation proceeding, percentage of capsular polysaccharide versus dry cells weight was reduced from 2.5% to 0.89%. Ratio of unsaturated fatty acids to saturated fatty acids was increased obviously which can improve membrane fluidity. Also transcription level of acetic acid resistance genes was promoted. Interestingly, activity of alcohol respiratory chain and ATPase was not inhibited but promoted obviously with acetic acid accumulation which could provide enough energy for acetic acid resistance mechanism. CONCLUSION: On the basis of the results obtained from the experiment, A. pasteurianus CICIM B7003 relies mainly on the cooperation of changes of extracellular capsular polysaccharide and membrane fatty acids, activation of acid resistance genes transcription, enhancement of activity of alcohol respiratory chain and rapid energy production to tolerate acidic environment.

Multidimensional analysis of wheat original crucial endogenous enzymes driving microbial communities metabolism during high-temperature Daqu fermentation.

Knowledge of the metabolism of functional enzymes is the key to accelerate the transformation and utilization of raw materials during high temperature Daqu (HTD) manufacturing. However, the metabolic contribution of raw materials-wheat is always neglected. In this research, the relationship between the metabolism of wheat and microorganisms was investigated using physicochemical and sequencing analysis method. Results showed that the process of Daqu generation was divided into three stages based on temperature. In the early stage, a positive correlation was found between Monascus, Rhizopus and glucoamylase metabolism (r > 0.8, p < 0.05). Meanwhile, the glucoamylase metabolism in wheat occupied 63.8 % of the total matrix at the day 4. In the middle to later stages, the wheat metabolism of proteases, α-amylases and lipases in gradually reached their peak. Additionally, Lactobacillus and α-amylases presented a positive correlation (r > 0.7, p < 0.05), and the α-amylases metabolism in wheat occupied 22.18 % of the total matrix during the same time period. More importantly, the changes of enzyme activity metabolic pathway in wheat and microorganism were reflected by respiratory entropy (RQ). Overall, these results guide the choice of substrate during Daqu production.

Study of dual binding specificity of aptamer to ochratoxin A and norfloxacin and the development of fluorescent aptasensor in milk detection.

Target specificity, one of aptamer characteristics that determine recognition efficiency of biosensors, is generally considered to be an intrinsic property of aptamer. However, a high-affinity aptamer may have additional target binding specificity, little is known about the specificity of aptamer binding to multiple targets, which may result in false-positive results that hinder the accuracy of detection. Herein, an aptamer OBA3 with dual target ochratoxin A (OTA) and norfloxacin (NOR) was used as an example to explore the binding specificity mechanism and developed rapid fluorescent aptasensing methods. The nucleotide 15th T of aptamer OBA3 was demonstrated to be critical for specificity and affinity binding of target OTA via site-saturation mutagenesis. Substituting the 15th T base for C base could directly improve recognition specificity of aptamer for NOR and remove the binding affinity for OTA. The combination of π-π stacking interactions, salt bridges and hydrogen bonds between loop pocket of aptamer and quinolone skeleton, piperazinyl group may contributes to the fluoroquinolone antibiotics (NOR and difloxacin)-aptamer recognition interaction. Based on this understanding, a dual-aptamer fluorescent biosensor was fabricated for simultaneous detection of OTA and NOR, which has a linear detection range of 50-6000 nM with a detection limit of 31 nM for OTA and NOR. Combined with T15C biosensor for eliminating interference of OTA, the assay was applied to milk samples with satisfactory recovery (94.06-100.93%), which can achieve detection of OTA and NOR individually within 40 min.

Diverse models of cavity engineering in enzyme modification: Creation, filling, and reshaping.

Most enzyme modification strategies focus on designing the active sites or their surrounding structures. Interestingly, a large portion of the enzymes (60%) feature active sites located within spacious cavities. Despite recent discoveries, cavity-mediated enzyme engineering remains crucial for enhancing enzyme properties and unraveling folding-unfolding mechanisms. Cavity engineering influences enzyme stability, catalytic activity, specificity, substrate recognition, and docking. This article provides a comprehensive review of various cavity engineering models for enzyme modification, including cavity creation, filling, and reshaping. Additionally, it also discusses feasible tools for geometric analysis, functional assessment, and modification of cavities, and explores potential future research directions in this field. Furthermore, a promising universal modification strategy for cavity engineering that leverages state-of-the-art technologies and methodologies to tailor cavities according to the specific requirements of industrial production conditions is proposed.

Computer-Aided Reconstruction and Application of Bacillus halodurans S7 Xylanase with Heat and Alkali Resistance.

ß-1,4-Endoxylanase is the most critical hydrolase for xylan degradation during lignocellulosic biomass utilization. However, its poor stability and activity in hot and alkaline environments hinder its widespread application. In this study, BhS7Xyl from Bacillus halodurans S7 was improved using a computer-aided design through isothermal compressibility (ßT) perturbation engineering and by combining three thermostability prediction algorithms (ICPE-TPA). The best variant with remarkable improvement in specific activity, heat resistance (70 °C), and alkaline resistance (both pH 9.0 and 70 °C), R69F/E137M/E145L, exhibited a 4.9-fold increase by wild-type in specific activity (1368.6 U/mg), a 39.4-fold increase in temperature half-life (458.1 min), and a 57.6-fold increase in pH half-life (383.1 min). Furthermore, R69F/E137M/E145L was applied to the hydrolysis of agricultural waste (corncob and hardwood pulp) to efficiently obtain a higher yield of high-value xylooligosaccharides. Overall, the ICPE-TPA strategy has the potential to improve the functional performance of enzymes under extreme conditions for the high-value utilization of lignocellulosic biomass.

In-situ substitution and community dynamics modeling for enhanced safety in Chinese rice wine brewing.

This research paper focuses on the application of the "Design-Build-Test-Learn" framework to design and evaluate a synthetic microbial community aimed at studying the impact of Lactic Acid Bacteria (LAB) interactions and fitness on the formation of biogenic amines (BAs) in Chinese rice wine (CRW). The study reveals a close correlation between the assembly model of LAB and the accumulation of BAs in CRW, and multiple interactions were observed between amine-producing and non-amine-producing LAB, including commensalism, amensalism, and competition. The commensalism among amine-producing LAB was found to promote BAs accumulation through metabolic cross-feeding of amino acids. Moreover, the higher-order interaction community was designed to regulate the BAs formation effectively. For instance, the interference of Lactiplantibacillus plantarum (ACBC271) resulted in the elimination of amine-producing LAB viability, resulting in a 22% decrease (not exceeding 43.54 mg/L) in the total amount of BAs. Simulation of community dynamics models further suggests that LAB with quantitative social interactions can effectively control LAB accumulation in CRW by forecasting fluctuation in BAs generation through fitness competition and metabolic interference. Overall, this study provides valuable insights into the complex interaction networks within microbial communities in traditional fermentation ecosystems. It also proposes a novel approach for quality control of nitrogen food safety factors in fermented foods.

Unraveling the Metabolic Behavior and Interspecific Interaction Pattern of Lactic Acid Bacteria within Chinese Rice Wine.

The synthetic community of lactic acid bacteria (LAB) is commonly utilized in the food industry for manipulating product properties. However, the intermediate interactions and ecological stability resulting from metabolic differences among various LAB types remain poorly understood. We aimed to analyze the metabolic behavior of single and combined lactic acid bacteria in China rice wine based on microbial succession. Three-stage succession patterns with obligate heterofermentative LAB dominating prefermentation and homofermentative LAB prevailing in main fermentation were observed. Facultative heterofermentative LAB exhibited significant growth. Pairwise coculture interactions revealed 63.5% positive, 34.4% negative, and 2.1% neutral interactions, forming nontransitive and transitive competition modes. Nontransitive competitive combinations demonstrated stability over ∼200 generations through amino acid (mainly aspartic acid, glutamine, and serine) cross-feeding and lactic acid detoxification, which also showed potential for controlling biogenic amines and developing LAB starter cultures. Our findings offer insights into the mechanistic underpinnings of LAB interaction networks.