Acceleration of radiative recombination for efficient perovskite LEDs.

The increasing demands for more efficient and brighter thin-film light-emitting diodes (LEDs) in flat-panel display and solid-state lighting applications have promoted research into three-dimensional (3D) perovskites. These materials exhibit high charge mobilities and low quantum efficiency droop1-6, making them promising candidates for achieving efficient LEDs with enhanced brightness. To improve the efficiency of LEDs, it is crucial to minimize nonradiative recombination while promoting radiative recombination. Various passivation strategies have been used to reduce defect densities in 3D perovskite films, approaching levels close to those of single crystals3. However, the slow radiative (bimolecular) recombination has limited the photoluminescence quantum efficiencies (PLQEs) of 3D perovskites to less than 80% (refs. 1,3), resulting in external quantum efficiencies (EQEs) of LED devices of less than 25%. Here we present a dual-additive crystallization method that enables the formation of highly efficient 3D perovskites, achieving an exceptional PLQE of 96%. This approach promotes the formation of tetragonal FAPbI3 perovskite, known for its high exciton binding energy, which effectively accelerates the radiative recombination. As a result, we achieve perovskite LEDs with a record peak EQE of 32.0%, with the efficiency remaining greater than 30.0% even at a high current density of 100 mA cm-2. These findings provide valuable insights for advancing the development of high-efficiency and high-brightness perovskite LEDs.

Recent Development of Halide Perovskite Materials and Devices for Ionizing Radiation Detection.

Ionizing radiation such as X-rays and γ-rays has been extensively studied and used in various fields such as medical imaging, radiographic nondestructive testing, nuclear defense, homeland security, and scientific research. Therefore, the detection of such high-energy radiation with high-sensitivity and low-cost-based materials and devices is highly important and desirable. Halide perovskites have emerged as promising candidates for radiation detection due to the large light absorption coefficient, large resistivity, low leakage current, high mobility, and simplicity in synthesis and processing as compared with commercial silicon (Si) and amorphous selenium (a-Se). In this review, we provide an extensive overview of current progress in terms of materials development and corresponding device architectures for radiation detection. We discuss the properties of a plethora of reported compounds involving organic-inorganic hybrid, all-inorganic, all-organic perovskite and antiperovskite structures, as well as the continuous breakthroughs in device architectures, performance, and environmental stability. We focus on the critical advancements of the field in the past few years and we provide valuable insight for the development of next-generation materials and devices for radiation detection and imaging applications.

Turning Nonemissive CsPb2Br5 Crystals into High-Performance Scintillators through Alkali Metal Doping.

X-ray scintillators have utility in radiation detection, therapy, and imaging. Various materials, such as halide perovskites, organic illuminators, and metal clusters, have been developed to replace conventional scintillators due to their ease of fabrication, improved performance, and adaptability. However, they suffer from self-absorption, chemical instability, and weak X-ray stopping power. Addressing these limitations, we employ alkali metal doping to turn nonemissive CsPb2Br5 into scintillators. Introducing alkali metal dopants causes lattice distortion and enhances electron-phonon coupling, which creates transient potential energy wells capable of trapping photogenerated or X-ray-generated electrons and holes to form self-trapped excitons. These self-trapped excitons undergo radiative recombination, resulting in a photoluminescence quantum yield of 55.92%. The CsPb2Br5-based X-ray scintillator offers strong X-ray stopping power, high resistance to self-absorption, and enhanced stability when exposed to the atmosphere, chemical solvents, and intense irradiation. It exhibits a detection limit of 162.3 nGyair s-1 and an imaging resolution of 21 lp mm-1.

Modulation of Heterotypic and Homotypic Interactions to Visualize the Evolution of Organic Aggregates in a Fluorescence Turn-on Manner.

The abnormal evolution of membrane-less organelles into amyloid fibrils is a causative factor in many neurodegenerative diseases. Fundamental research on evolving organic aggregates is thus instructive for understanding the root causes of these diseases. In-situ monitoring of evolving molecular aggregates with built-in fluorescence properties is a reliable approach to reflect their subtle structural variation. To increase the sensitivity of real-time monitoring, we presented organic aggregates assembled by TPAN-2MeO, which is a triphenyl acrylonitrile derivative. TPAN-2MeO showed a morphological evolution with distinct turn-on emission. Upon rapid nanoaggregation, it formed non-emissive spherical aggregates in the kinetically metastable state. Experimental and simulation results revealed that the weak homotypic interactions between the TPAN-2MeO molecules liberated their molecular motion for efficient non-radiative decay, and the strong heterotypic interactions between TPAN-2MeO and water stabilized the molecular geometry favorable for the non-fluorescent state. After ultrasonication, the decreased heterotypic interactions and increased homotypic interactions acted synergistically to allow access to the emissive thermodynamic equilibrium state with a decent photoluminescence quantum yield (PLQY). The spherical aggregates were eventually transformed into micrometer-sized blocklike particles. Under mechanical stirring, the co-assembly of TPAN-2MeO and Pluronic F-127 formed uniform fluorescent platelets, inducing a significant enhancement in PLQY. These results decipher the stimuli-triggered structural variation of organic aggregates with concurrent sensitive fluorescence response and pave the way for a deep understanding of the evolutionary events of biogenic aggregates.

Exploring, Identifying, and Removing the Efficiency-Limiting Factor of Mixed-Dimensional 2D/3D Perovskite Solar Cells.

ConspectusThree-dimensional (3D) halide perovskite (HP) solar cells have been thriving as promising postsilicon photovoltaic systems. However, despite the decency of efficiency, they suffer from poor stability. Partial dimensionality reduction from 3D to 2D was found to significantly meliorate the instability, thus mixed-dimensional 2D/3D HP solar cells have been expected to combine favorable durability and high efficiency. Nevertheless, their power conversion efficiency (PCE) does not live up to the expectation, hardly exceeding 19%, in sharp contrast with the ∼26% benchmark for pure 3D HP solar cells. The low PCE primarily arises from the restricted charge transport of the mixed-phasic 2D/3D HP layer. Understanding its photophysical dynamics, including its nanoscopic phase distribution and interphase carrier transfer kinetics, is essential for fathoming the underlying restriction mechanism. This Account outlines the three historical photophysical models of the mixed-phasic 2D/3D HP layer (denoted as models I, II, and III hereafter). Model I opines (i) a gradual dimensionality transition in the axial direction and (ii) a type II band alignment between 2D and 3D HP phases, hence favorably driving global carrier separation. Model II takes the view that (i) 2D HP fragments are interspersed in the 3D HP matrix with a macroscopic concentration variation in the axial direction and (ii) 2D and 3D HP phases instead form a type I band alignment. Photoexcitations would rapidly transfer from wide-band-gap 2D HPs to narrow-band-gap 3D HPs, which then serve as the charge transport network. Model II is currently the most widely accepted. We are one of the earliest groups to unveil the ultrafast interphase energy-transfer process. Recently, we further amended the photophysical model to consider also (i) an interspersing pattern of phase distribution but (ii) the 2D/3D HP heterojunction to be a p-n heterojunction with built-in potential. Anomalously, the built-in potential of the 2D/3D HP heterojunction increases upon photoexcitation. Therefore, local 3D/2D/3D misalignments would severely impede charge transport due to carrier blocking or trapping. Contrary to models I and II which hold 2D HP fragments as the culprit, model III rather suspects the 2D/3D HP interface for blunting the charge transport. This insight also rationalizes the distinct photovoltaic performances of the mixed-dimensional 2D/3D configuration and the 2D-on-3D bilayer configuration. To extinguish the detrimental 2D/3D HP interface, our group also developed an approach to alloy the multiphasic 2D/3D HP assembly into phase-pure intermediates. The accompanying challenges that are coming are also discussed.

Interfacial engineering of halide perovskites and two-dimensional materials.

Recently, halide perovskites (HPs) and layered two-dimensional (2D) materials have received significant attention from industry and academia alike. HPs are emerging materials that have exciting photoelectric properties, such as a high absorption coefficient, rapid carrier mobility and high photoluminescence quantum yields, making them excellent candidates for various optoelectronic applications. 2D materials possess confined carrier mobility in 2D planes and are widely employed in nanostructures to achieve interfacial modification. HP/2D material interfaces could potentially reveal unprecedented interfacial properties, including light absorbance with desired spectral overlap, tunable carrier dynamics and modified stability, which may lead to several practical applications. In this review, we attempt to provide a comprehensive perspective on the development of interfacial engineering of HP/2D material interfaces. Specifically, we highlight the recent progress in HP/2D material interfaces considering their architectures, electronic energetics tuning and interfacial properties, discuss the potential applications of these interfaces and analyze the challenges and future research directions of interfacial engineering of HP/2D material interfaces. This review links the fields of HPs and 2D materials through interfacial engineering to provide insights into future innovations and their great potential applications in optoelectronic devices.

Achieving Near-Unity Red Light Photoluminescence in Antimony Halide Crystals via Polyhedron Regulation.

Exploration of efficient red emitting antimony hybrid halide with large Stokes shift and zero self-absorption is highly desirable due to its enormous potential for applications in solid light emitting, and active optical waveguides. However, it is still challenging and rarely reported. Herein, a series of (TMS)2SbCl5 (TMS=triphenylsulfonium cation) crystals have been prepared with diverse [SbCl5]2- configurations and distinctive emission color. Among them, cubic-phase (TMS)2SbCl5 shows bright red emission with a large Stokes shift of 312 nm. In contrast, monoclinic and orthorhombic (TMS)2SbCl5 crystals deliver efficient yellow and orange emission, respectively. Comprehensive structural investigations reveal that larger Stokes shift and longer-wavelength emission of cubic (TMS)2SbCl5 can be attributed to the larger lattice volume and longer Sb⋅⋅⋅Sb distance, which favor sufficient structural aberration freedom at excited states. Together with robust stability, (TMS)2SbCl5 crystal family has been applied as optical waveguide with ultralow loss coefficient of 3.67 ⋅ 10-4 dB µm-1, and shows superior performance in white-light emission and anti-counterfeiting. In short, our study provides a novel and fundamental perspective to structure-property-application relationship of antimony hybrid halides, which will contribute to future rational design of high-performance emissive metal halides.

Oriented Growth of Highly Emissive Manganese Halide Microrods for Dual-Mode Low-Loss Optical Waveguides.

Zero-dimensional (0D) structured lead-free metal halides have recently attracted widespread attention due to their high photoluminescence quantum yield (PLQY) and negligible self-absorption, showing enormous potential as optical waveguides towards miniaturized photonic devices. However, due to the great difficulty in growth of rod-like nano/micro-sized morphologies, such applications have been less explored. Herein, a new-type emissive organic-inorganic manganese (II) halide crystal (TPS2MnCl4, TPS = C18H15S, triphenylsulfonium) in the form of microrods is synthesized via a facile chloride ion (Cl-) induced oriented growth method. Due to a combination of attractive features such as a high PLQY of 86%, negligible self-absorption and smooth crystal surface, TPS2MnCl4 microrods are well suited for use in optical waveguide with an ultra-low optical loss coefficient of 1.20·10-4 dB µm-1, superior to that of most organic-inorganic metal halide hybrids, organic materials, polymers and metal nanoclusters to the best of our knowledge. Importantly, TPS2MnCl4 microrods can further work as dual-mode optical waveguides, combining active and passive light transmission functionalities in one single crystal. In addition, TPS2MnCl4 microrods also display remarkable performance in lighting and anti-counterfeiting due to their distinct optical properties and commendable stability.

Donor-Acceptor Type Supra-Carbon-Dots with Long Lifetime Photogenerated Radicals Boosting Tumor Photodynamic Therapy.

Carbon dots (CDs) have gained significant interest because of their potential in biomedical applications. Nevertheless, developing CDs with efficient photoinduced charge separation for tumor photodynamic therapy (PDT) remains a challenge. This study presents a novel class of supra-carbon-dots (supra-CDs) developed by fusing red emissive CDs with 2,3-dicyanohydroquinone (DCHQ) via post-solvothermal treatment. In supra-CDs, the core, acting as electron donors, is formed by assembled CDs with substantial sp2 domains, the fused interface originating from DCHQ with electron-withdrawing groups functions as the electron acceptor. This configuration creates the unique donor-acceptor nanostructure. Upon white light irradiation, the excited electrons from the assembled CDs were transferred to the electron-withdrawing interface, whereas the photogenerated holes were retained within the assembled CDs as radicals, leading to effective photoinduced charge separation. The separated photogenerated electrons then react with oxygen to generate superoxide radicals. Simultaneously, the photogenerated holes undergo oxidation of crucial cellular substrates. This dual action underscores the exceptional cell-killing efficacy of supra-CDs. Moreover, the increased particle sizes (~20 nm) ensure supra-CDs to exhibit a notable capacity for tumor accumulation via the improved permeability and retention effect, thereby achieving satisfactory anti-tumor PDT efficacy in a mouse subcutaneous tumor model.

Vertically Concentrated Quantum Wells Enabling Highly Efficient Deep-Blue Perovskite Light-Emitting Diodes.

Deep-blue perovskite light-emitting diodes (PeLEDs) based on quasi-two-dimensional (quasi-2D) systems exist heightened sensitivity to the domain distribution. The top-down crystallization mode will lead to a vertical gradient distribution of quantum well (QW) structure, which is unfavorable for deep-blue emission. Herein, a thermal gradient annealing treatment is proposed to address the polydispersity issue of vertical QWs in quasi-2D perovskites. The formation of large-n domains at the upper interface of the perovskite film can be effectively inhibited by introducing a low-temperature source in the annealing process. Combined with the utilization of NaBr to inhibit the undesirable n=1 domain, a vertically concentrated QW structure is ultimately attained. As a result, the fabricated device delivers a narrow and stable deep-blue emission at 458 nm with an impressive external quantum efficiency (EQE) of 5.82 %. Green and sky-blue PeLEDs with remarkable EQE of 21.83 % and 17.51 % are also successfully achieved, respectively, by using the same strategy. The findings provide a universal strategy across the entire quasi-2D perovskites, paving the way for future practical application of PeLEDs.

Emulating "Curvature-Enhanced Adsorbate Coverage" for Superconformal and Orientated Zn Electrodeposition in Zinc-ion-Batteries.

Uneven Zn deposition and unfavorable side reactions have prevented the reversibility of the Zn anode. Herein, we design a rearranged (002) textured Zn anode inspired by a traditional curvature-enhanced adsorbate coverage (CEAC) process to realize the highly reversible Zn anode. The rearranged (002) textured structure orientates the superconformal Zn deposition owing to the spatial deposition rate of the rearranged crystal planes, promoting bottom-up "superfilling" of the 3D Zn skeletons. Meanwhile, our designed anode also induces the epitaxial Zn deposition, alleviating the parasitic reactions owing to the lowest surface energy of the (002) plane. Attributed to these superiorities, uniform and oriented Zn deposition can be obtained, exhibiting an ultra-long lifespan over 479 hrs at an ultrahigh depth of discharge (DOD) of 82.12%. The Zn|Na2V6O16·3H2O battery delivers an improved cycling performance, even at a high area capacity of 5.15 mAh/cm2 with a low negative/positive (N/P) capacity ratio of 1.63. The superconformal deposition approach for Zn anodes paves the way for the practical application of high-performance zinc-ion batteries.

Improving Crystallinity and Out-of-Plane Orientation in Quasi-2D Ruddlesden-Popper Perovskite by Fluorinated Organic Salt for Light-Emitting Diodes.

Fluoro-substituted aromatic alkylammonium spacer cations are found effective to improve the performance of quasi-2D perovskite light-emitting diodes (PeLEDs). The fluorine substitution is generally attributed to the defect passivation, quantum well width control, and energy level adjustments. However, the substituted cations can also affect the crystallization process but is not thoroughly studied. Herein, a comparison study is carried out using bare PEA cation and three different fluoro-substituted PEA (x-F-PEA, x = o, ortho; m, meta; p, para) cations to investigate the impacts of different substitution sites on the perovskite crystallization and orientations. By using GIWAXS, p-F-PEA cation is found to induce the strongest preferential out-of-plane orientations with the best crystallinity in quasi-2D perovskite. Using dynamic light scattering (DLS) methods, larger colloidal particles (630 nm) are revealed in p-F-PEA precursor solutions than the PEA cations (350 nm). The larger particles can accelerate the crystallization process and induce out-of-plane orientation from increased dipole-dipole interaction. The transient absorption measurement confirms longer radiative recombination lifetime, proving beneficial effect of p-F-PEA cation. As a result, the fabricated p-F-PEA-based PeLEDs achieved the highest EQE of 15.2%, which is higher than those of PEA- (8.8%), o-F-PEA- (4.3%), and m-F-PEA-based (10.3%) PeLEDs.

Assignment of Core and Surface States in Multicolor-Emissive Carbon Dots.

It is important to reveal the luminescence mechanisms of carbon dots (CDs). Herein, CDs with two types of optical centers are synthesized from citric acid in formamide by a solvothermal method, and show high photoluminescence quantum yield reaching 42%. Their green/yellow emission exhibits pronounced vibrational structure and high resistance toward photobleaching, while broad red photoluminescence is sensitive to solvents, temperature, and UV-IR. Under UV-IR, the red emission is gradually bleached due to the photoinduced dehydration of the deprotonated surface of CDs in dimethyl sulfoxide, while this process is hindered in water. From the analysis of steady-state and time-resolved photoluminescence and transient absorption data together with density functional theory calculations, the green/ yellow emission is assigned to conjugated sp2 -domains (core state) similar to organic dye derivatives stacked within disk-shaped CDs; and the broad red emission-to oxygen-containing groups bound to sp2 -domains (surface state), whereas energy transfer from the core to the surface state can happen.

Persistent Charging of CsPbBr3 Perovskite Nanocrystals Confined in Glass Matrix.

Manipulation of persistent charges in semiconductor nanostructure is the key point to obtain quantum bits towards the application of quantum memory and information devices. However, realizing persistent charge storage in semiconductor nano-systems is still very challenge due to the disturbance from crystal defects and environment conditions. Herein, the two-photon persistent charging induced long-lasting afterglow and charged exciton formation are observed in CsPbBr3 perovskite nanocrystals (NCs) confined in glass host with effective lifetime surpassing one second, where the glass inclosure provides effective protection. A method combining the femtosecond and second time-resolved transient absorption spectroscopy is explored to determine the persistent charging possibility of perovskite NCs unambiguously. Meanwhile, with temperature-dependent spectroscopy, the underlying mechanism of this persistent charging is elucidated. A two-channel carrier transfer model is proposed involving athermal quantum tunneling and slower thermal-assisted channel. On this basis, two different information storage devices are demonstrated with the memory time exceeding two hours under low-temperature condition. These results provide a new strategy to realize persistent charging in perovskite NCs and deepen the understanding of the underlying carrier kinetics, which may pave an alternative way towards novel information memory and optical data storage applications.

L-Arginine-Functionalized Carbon Dots with Enhanced Red Emission and Upregulated Intracellular L-Arginine Intake for Obesity Inhibition.

Obesity is a major global health problem that significantly increases the risk of many other diseases. Herein, a facile method of suppressing lipogenesis and obesity using L-arginine-functionalized carbon dots (L-Arg@CDots) is reported. The prepared CDots with a negative surface charge form stronger bonds than D-arginine and lysine with L-Arg in water. The L-Arg@CDots in the aqueous solution offer a high photoluminescence quantum yield of 23.6% in the red wavelength region. The proposed L-Arg functionalization strategy not only protects the red emission of the CDots from quenching by water molecules but also enhances the intracellular uptake of L-Arg to reduce lipogenesis. Injection of L-Arg@CDots can reduce the body weight increase in ob/ob mice by suppressing their food intake and shrinking the white adipose tissue cells, thereby significantly inhibiting obesity.

Room-temperature epitaxial welding of 3D and 2D perovskites.

Formation of epitaxial heterostructures via post-growth self-assembly is important in the design and preparation of functional hybrid systems combining unique properties of the constituents. This is particularly attractive for the construction of metal halide perovskite heterostructures, since their conventional solution synthesis usually leads to non-uniformity in composition, crystal phase and dimensionality. Herein, we demonstrate that a series of two-dimensional and three-dimensional perovskites of different composition and crystal phase can form epitaxial heterostructures through a ligand-assisted welding process at room temperature. Using the CsPbBr3/PEA2PbBr4 heterostructure as a demonstration, in addition to the effective charge and energy transfer across the epitaxial interface, localized lattice strain was observed at the interface, which was extended to the top layer of the two-dimensional perovskite, leading to multiple new sub-bandgap emissions at low temperature. Given the versatility of our strategy, unlimited hybrid systems are anticipated, yielding composition-, interface- and/or orientation-dependent properties.

Synthesis, Characterization and Singlet Fission Behaviors of Heteroatom-Doped Polycyclic Aromatic Hydrocarbons with (ß, ß) Connected Furan/Thiophene Ring.

Singlet fission (SF) has been proven to be an effective strategy to overcome the Shockley-Queisser limit of photovoltaics. However, the materials suitable for SF are relatively rare due to the strict requirements for the occurrence of this process. In the present study, we report the first preparation of two heteroatoms (O and S)-doped polycyclic aromatic hydrocarbons (PAHs) molecules with (ß, ß) connected furan/thiophene ring. The optical and physiochemical properties of both compounds are investigated by a variety of spectroscopies, including UV-vis absorption, photoluminescence and cyclic voltammetry. In addition, their ultrafast excited state dynamics are studied by femtosecond transient absorption. Experimental data showed that the singlet fission efficiency was improved by 2 times when replacing oxygen with sulfur atom, which could provide some guidelines in designing singlet fission materials with better efficiency.

Triplet Homoleptic Iridium(III) Complex as a Potential Donor Material for Organic Solar Cells.

Triplet photovoltaic materials have been rarely investigated in organic solar cells (OSCs) because the role and mechanism of triplet excitons are still unclear. Cyclometalated heavy metal complexes with triplet features are expected to increase exciton diffusion lengths and improve exciton dissociation in OSCs, while the power conversion efficiencies (PCEs) of their bulk-heterojunction (BHJ) OSCs are still limited to <4%. We herein report an octahedral homoleptic tris-Ir(III) complex TBz3Ir as a donor material for BHJ OSCs with a PCE of over 11%. In comparison with the planar organic TBz ligand and heteroleptic TBzIr, TBz3Ir demonstrates the highest PCE and best device stability in both fullerene- and non-fullerene-based devices, owing to the long triplet lifetime, enhanced optical absorption, increased charge transport, and improved film morphology. From transient absorption, triplet excitons were deduced to participate in the photoelectric conversion process. In particular, the more significant 3D structure of TBz3Ir induces an unusual film morphology in TBz3Ir:Y6 blends, showing obviously large domain sizes suitable for triplet excitons. Thus, a high PCE of 11.35% with a high circuit current density of 24.17 mA cm-2 and a fill factor of 0.63 is achieved for small-molecular Ir complex-based BHJ OSCs.

Passivating Defects at the Bottom Interface of Perovskite by Ethylammonium to Improve the Performance of Perovskite Solar Cells.

The interface of perovskite solar cells (PSCs) plays a significant role in influencing their performance, yet there is still scarce research focusing on their difficult-to-expose bottom interfaces. Herein, ethylammonium bromide (EABr) is introduced into the bottom interface and its passivation effects are studied directly. First, EABr can improve substrate wettability, which is beneficial for the perovskite-film deposition. By lifting off the perovskite film spontaneously from the substrate, it is found that EABr can significantly reduce the amount of unreacted PbI2 at the bottom interface. These PbI2 crystals have been recently identified as a major defect source and degradation site for perovskite film. Meanwhile, EABr also lifts the valence band maximum at the bottom side of perovskite from -5.38 to -5.09 eV, facilitating better hole transfer. Such a improvement is also verified by the study of charge carrier dynamics. Through introducing EABr, all photovoltaic parameters of the inverted PSCs are improved, and their power conversion efficiency (PCE) increases from 20.41% to 21.06%. The study highlights the importance of direct characterization of the bottom interface for a better passivation effect.