Co4 N-Decorated 3D Wood-Derived Carbon Host Enables Enhanced Cathodic Electrocatalysis and Homogeneous Lithium Deposition for Lithium-Sulfur Full Cells.

The sluggish kinetics of sulfur conversion in the cathode and the nonuniform deposition of lithium metal at the anode result in severe capacity decay and poor cycle life for lithium-sulfur (Li-S) batteries. Resolving these deficiencies is the most direct route toward achieving practical cells of this chemistry. Herein, a vertically aligned wood-derived carbon plate decorated with Co4 N nanoparticles host (Co4 N/WCP) is proposed that can serve as a host for both the sulfur cathode and the metallic lithium anode. This Co4 N/WCP electrode host drastically enhances the reaction kinetics in the sulfur cathode and homogenizes the electric field at the anode for the uniform lithium plating. Density functional theory calculations confirm the experimental observations that Co4 N/WCP provides a lower energy barrier for the polysulfide redox reaction in the cathode and a low adsorption energy for lithium deposition at the anode. Employing the Co4 N/WCP host at both electrodes in a S@Co4 N/WCP||Li@Co4 N/WCP full cell delivers a specific capacity of 807.9 mAh g-1 after 500 cycles at a 1 C rate. Additional experiments are performed with high areal sulfur loading of 4 mg cm-2 to demonstrate the viability of this strategy for producing practical Li-S cells.

Oxidative Stress-Mediated Programmed Cell Death: a Potential Therapy Target for Atherosclerosis.

Nowadays, as a type of orderly and active death determined by genes, programmed cell death (PCD), including apoptosis, pyroptosis, ferroptosis, and necroptosis, has attracted much attention owing to its participation in numerous chronic cardiovascular diseases, especially atherosclerosis (AS), a canonical chronic inflammatory disease featured by lipid metabolism disturbance. Abundant researches have reported that PCD under distinct internal conditions fulfills different roles of atherosclerotic pathological processes, including lipid core expansion, leukocyte adhesion, and infiltration. Noteworthy, emerging evidence recently has also suggested that oxidative stress (OS), an imbalance of antioxidants and oxygen free radicals, has the potential to mediate PCD occurrence via multiple ways, including oxidization and deubiquitination. Interestingly, more recently, several studies have proposed that the mediating mechanisms could effect on the atherosclerotic initiation and progression significantly from variable aspects, so it is of great clinical importance to clarify how OS-mediated PCD and AS interact. Herein, with the aim of summarizing potential and sufficient atherosclerotic therapy targets, we seek to provide extensive analysis of the specific regulatory mechanisms of PCD mediated by OS and their multifaceted effects on the entire pathological atherosclerotic progression.

Interfacial Chemistry Enables Stable Cycling of All-Solid-State Li Metal Batteries at High Current Densities.

The application of flexible, robust, and low-cost solid polymer electrolytes in next-generation all-solid-state lithium metal batteries has been hindered by the low room-temperature ionic conductivity of these electrolytes and the small critical current density of the batteries. Both issues stem from the low mobility of Li+ ions in the polymer and the fast lithium dendrite growth at the Li metal/electrolyte interface. Herein, Mg(ClO4)2 is demonstrated to be an effective additive in the poly(ethylene oxide) (PEO)-based composite electrolyte to regulate Li+ ion transport and manipulate the Li metal/electrolyte interfacial performance. By combining experimental and computational studies, we show that Mg2+ ions are immobile in a PEO host due to coordination with ether oxygen and anions of lithium salts, which enhances the mobility of Li+ ions; more importantly, an in-situ formed Li+-conducting Li2MgCl4/LiF interfacial layer homogenizes the Li+ flux during plating and increases the critical current density up to a record 2 mA cm-2. Each of these factors contributes to the assembly of competitive all-solid-state Li/Li, LiFePO4/Li, and LiNi0.8Mn0.1Co0.1O2/Li cells, demonstrating the importance of surface chemistry and interfacial engineering in the design of all-solid-state Li metal batteries for high-current-density applications.

Li2 S6 -Integrated PEO-Based Polymer Electrolytes for All-Solid-State Lithium-Metal Batteries.

The integration of Li2 S6 within a poly(ethylene oxide) (PEO)-based polymer electrolyte is demonstrated to improve the polymer electrolyte's ionic conductivity because the strong interplay between O2- (PEO) and Li+ from Li2 S6 reduces the crystalline volume within the PEO. The Li/electrolyte interface is stabilized by the in situ formation of an ultra-thin Li2 S/Li2 S2 layer via the reaction between Li2 S6 and lithium metal, which increases the ionic transport at the interface and suppresses lithium dendrite growth. A symmetric Li/Li cell with the Li2 S6 -integrated composite electrolyte has excellent cyclability and a high critical current density of 0.9 mA cm-2 at 40 °C. Impressive electrochemical performance is demonstrated with all-solid-state Li/LiFePO4 and high-voltage Li/LiNi0.8 Mn0.1 Co0.1 O2 cells at 40 °C.

Fast Li+ Conduction Mechanism and Interfacial Chemistry of a NASICON/Polymer Composite Electrolyte.

The unclear Li+ local environment and Li+ conduction mechanism in solid polymer electrolytes, especially in a ceramic/polymer composite electrolyte, hinder the design and development of a new composite electrolyte. Moreover, both the low room-temperature Li+ conductivity and large interfacial resistance with a metallic lithium anode of a polymer membrane limit its application below a relatively high temperature. Here we have identified the Li+ distribution and Li+ transport mechanism in a composite polymer electrolyte by investigating a new solid poly(ethylene oxide) (PEO)-based NASICON-LiZr2(PO4)3 composite with 7Li relaxation time and 6Li → 7Li trace-exchange NMR measurements. The Li+ population of the two local environments in the composite electrolytes depends on the Li-salt concentration and the amount of ceramic filler. A composite electrolyte with a [EO]/[Li+] ratio n = 10 and 25 wt % LZP filler has a high Li+ conductivity of 1.2 × 10-4 S cm-1 at 30 °C and a low activation energy owing to the additional Li+ in the mobile A2 environment. Moreover, an in situ formed solid electrolyte interphase layer from the reaction between LiZr2(PO4)3 and a metallic lithium anode stabilized the Li/composite-electrolyte interface and reduced the interfacial resistance, which provided a symmetric Li/Li cell and all-solid-state Li/LiFePO4 and Li/LiNi0.8Co0.1Mn0.1O2 cells a good cycling performance at 40 °C.

Abnormal Liquid Chasing Effect in Paper Capillary Enables Versatile Gradient Generation on Microfluidic Paper Analytical Devices.

Microfluidic paper analytical devices (µPADs) are smart and accessible substituents to traditional counterparts in point-of-care tests (POCT), which exploited delicate control over passive fluid in microscale for rich functions. In this work, we are extending such control by introducing novel ways to generate 1D and 2D gradients on µPADs. It is achieved by using paper-capillary-based serial sampling. The paper capillary is composed of a concaved paper channel sealed with tape, with test pads properly distributed aside. In such a structure, the liquid can not only quickly and automatically flow along the capillary but also be continuously consumed by the peripheral test pads. Thus, when we do serial sampling, an abnormal liquid chasing effect can be observed, where the later liquid sample chases and surpasses the earlier parts in the paper capillary, leading to reversely ordered sample distribution compared with that in a typical glass capillary. This specialty allows for fast, ordered, and tunable sequential sampling and enables efficient generation of 1D and 2D concentration gradient with one, two, and even three components on µPADs. Besides, we verified the applicability of this technique for arrayed assays, including 1D serial dilution-based metal ion colorimetry and a 2D bacterial antibiotic susceptibility test for synergic effect evaluations, which paves the way for high-throughput sample analysis and information-rich condition screening on µPADs.

Confined Microenvironments from Thermoresponsive Dendronized Polymers.

Confined microenvironments in biomacromolecules arising from molecular crowding account for their well-defined biofunctions and bioactivities. To mimick this, synthetic polymers to form confined structures or microenvironments are of key scientific value, which have received significant attention recently. To create synthetic confined microenvironments, molecular crowding effects and topological cooperative effects have been applied successfully, and the key is balance between self-association of structural units and self-repulsion from crowding-induced steric hindrance. In this article, formation of confined microenvironments from stimuli-responsive dendronized polymers carrying densely dendritic oligoethylene glycols (OEGs) moieties in their pendants is presented. These wormlike thick macromolecules exhibit characteristic thermoresponsive properties, which can provide constrained microenvironments to encapsulate effectively guest molecules including dyes, proteins, or nucleic acids to prevent their protonation or biodegradation. This efficient shielding effect can also mediate chemical reactions in aqueous phase, and even enhance chirality transferring efficiency. All of these can be switched off simply through the thermally-induced dehydration and collapse of OEG dendrons due to the amphiphilicity of OEG chains. Furthermore, the switchable encapsulation and release of guests can be greatly enhanced when these dendronized polymers are used as major constituents for fabricating bulk hydrogels or nanogels, which provide a higher-level confinement.

Enhanced Surface Interactions Enable Fast Li+ Conduction in Oxide/Polymer Composite Electrolyte.

Li+ -conducting oxides are considered better ceramic fillers than Li+ -insulating oxides for improving Li+ conductivity in composite polymer electrolytes owing to their ability to conduct Li+ through the ceramic oxide as well as across the oxide/polymer interface. Here we use two Li+ -insulating oxides (fluorite Gd0.1 Ce0.9 O1.95 and perovskite La0.8 Sr0.2 Ga0.8 Mg0.2 O2.55 ) with a high concentration of oxygen vacancies to demonstrate two oxide/poly(ethylene oxide) (PEO)-based polymer composite electrolytes, each with a Li+ conductivity above 10-4  S cm-1 at 30 °C. Li solid-state NMR results show an increase in Li+ ions (>10 %) occupying the more mobile A2 environment in the composite electrolytes. This increase in A2-site occupancy originates from the strong interaction between the O2- of Li-salt anion and the surface oxygen vacancies of each oxide and contributes to the more facile Li+ transport. All-solid-state Li-metal cells with these composite electrolytes demonstrate a small interfacial resistance with good cycling performance at 35 °C.

Microfluidic fabrication of microparticles for biomedical applications.

Droplet microfluidics offers exquisite control over the flows of multiple fluids in microscale, enabling fabrication of advanced microparticles with precisely tunable structures and compositions in a high throughput manner. The combination of these remarkable features with proper materials and fabrication methods has enabled high efficiency, direct encapsulation of actives in microparticles whose features and functionalities can be well controlled. These microparticles have great potential in a wide range of bio-related applications including drug delivery, cell-laden matrices, biosensors and even as artificial cells. In this review, we briefly summarize the materials, fabrication methods, and microparticle structures produced with droplet microfluidics. We also provide a comprehensive overview of their recent uses in biomedical applications. Finally, we discuss the existing challenges and perspectives to promote the future development of these engineered microparticles.

Dual-Functional Carbon Dots Pattern on Paper Chips for Fe3+ and Ferritin Analysis in Whole Blood.

Though microfluidic paper analytical devices (µPADs) have attracted paramounting attentions in recent years as promising devices for low cost point-of-care tests, their real applications for blood analysis are still challenged by integrating sample preparation with different detection modes on a same µPAD. Herein, we developed a novel µPAD, which well coupled automatic serum extraction with reliable dual mode iron health tests: fluorescent analysis for Fe3+ and colorimetric ELISA for ferritin. All these functions are made available by in situ carbon dots (CDs) and AuNPs sequential patterning techniques. For CDs immobilization, hydrothermal reaction was taken on paper, to which a patterned through-hole polydimethylsiloxane (PDMS) mask was applied. None fluorescence CDs (nF-CDs) were generated on exposed regions, while the fluorescent CDs (F-CDs) were generated simultaneously on covered regions. Sensitive serum iron quantification was realized on the F-CDs modified regions, where Fe3+ ion can selectively quench the fluorescence of F-CDs. For AuNPs immobilization, electroless plating was taken on nF-CDs modified regions. The resulting AuNPs on nF-CDs layer on one hand triggered the coagulation of blood cells and thus led to the longest ever wicking distance for serum separation, on the other hand facilitated colorimetric enzyme linked immunosorbent assay (ELISA) for detection of serum ferritin. Combining the two readings, the µPAD can provide reliable measurement for serum iron and serum ferritin in whole blood. Furthermore, as CDs and AuNPs modified µPAD has the features of easy handling, low-cost, lightweight, and disposability, it is accounting for a promising prototype for whole blood point-of-care analysis.

Hybrid Polymer/Garnet Electrolyte with a Small Interfacial Resistance for Lithium-Ion Batteries.

Li7 La3 Zr2 O12 -based Li-rich garnets react with water and carbon dioxide in air to form a Li-ion insulating Li2 CO3 layer on the surface of the garnet particles, which results in a large interfacial resistance for Li-ion transfer. Here, we introduce LiF to garnet Li6.5 La3 Zr1.5 Ta0.5 O12 (LLZT) to increase the stability of the garnet electrolyte against moist air; the garnet LLZT-2 wt % LiF (LLZT-2LiF) has less Li2 CO3 on the surface and shows a small interfacial resistance with Li metal, a solid polymer electrolyte, and organic-liquid electrolytes. An all-solid-state Li/polymer/LLZT-2LiF/LiFePO4 battery has a high Coulombic efficiency and long cycle life; a Li-S cell with the LLZT-2LiF electrolyte as a separator, which blocks the polysulfide transport towards the Li-metal, also has high Coulombic efficiency and kept 93 % of its capacity after 100 cycles.

MCL attenuates atherosclerosis by suppressing macrophage ferroptosis via targeting KEAP1/NRF2 interaction.

BACKGROUND: Micheliolide (MCL), which is the active metabolite of parthenolide, has demonstrated promising clinical application potential. However, the effects and underlying mechanisms of MCL on atherosclerosis are still unclear. METHOD: ApoE-/- mice were fed with high fat diet, with or without MCL oral administration, then the plaque area, lipid deposition and collagen content were determined. In vitro, MCL was used to pretreat macrophages combined by ox-LDL, the levels of ferroptosis related proteins, NRF2 activation, mitochondrial function and oxidative stress were detected. RESULTS: MCL administration significantly attenuated atherosclerotic plaque progress, which characteristics with decreased plaque area, less lipid deposition and increased collagen. Compared with HD group, the level of GPX4 and xCT in atherosclerotic root macrophages were increased in MCL group obviously. In vitro experiment demonstrated that MCL increased GPX4 and xCT level, improved mitochondrial function, attenuated oxidative stress and inhibited lipid peroxidation to suppress macrophage ferroptosis induced with ox-LDL. Moreover, MCL inhibited KEAP1/NRF2 complex formation and enhanced NRF2 nucleus translocation, while the protective effect of MCL on macrophage ferroptosis was abolished by NRF2 inhibition. Additionally, molecular docking suggests that MCL may bind to the Arg483 site of KEAP1, which also contributes to KEAP1/NRF2 binding. Furthermore, Transfection Arg483 (KEAP1-R483S) mutant plasmid can abrogate the anti-ferroptosis and anti-oxidative effects of MC in macrophages. KEAP1-R483S mutation also limited the protective effect of MCL on atherosclerosis progress and macrophage ferroptosis in ApoE-/- mice. CONCLUSION: MCL suppressed atherosclerosis by inhibiting macrophage ferroptosis via activating NRF2 pathway, the related mechanism is through binding to the Arg483 site of KEAP1 competitively.

Combining metabolomics and OCT to reveal plasma metabolic profiling and biomarkers of plaque erosion and plaque rupture in STEMI patients.

OBJECTIVE: Plaque erosion (PE) and plaque rupture (PR) are the main subtypes of ST-segment elevation myocardial infarction (STEMI), the differences of metabolic patterns between PE and PR remain largely unknown. METHODS: 132 STEMI patients were divided into training set (PR, n = 36; PE, n = 36) and test set (PR, n = 30; PE, n = 30), the plasma from patients were analyzed by liquid chromatography quadruple time-of-flight mass spectrometry. RESULTS: We identified 56 and 28 differences in training and test set, respectively. Among these metabolites, it was found that docosahexaenoic acid (DHA), salicylic acid and proline were recognized in both tests. Receiver Operating Characteristic (ROC) analysis showed that the area under curve of docosahexaenoic acid (DHA) was 0.81 and 0.75 in training and test samples, respectively; proline was 0.67 and 0.74 in training and test samples, respectively; salicylic acid was 0.70 and 0.73 in training and test samples, respectively. CONCLUSIONS: DHA, salicylic acid, and proline could be used as non-invasive biomarkers to differentiate PE and PR.

A novel anti-atherosclerotic mechanism of quercetin: Competitive binding to KEAP1 via Arg483 to inhibit macrophage pyroptosis.

Natural antioxidants represented by quercetin have been documented to be effective against atherosclerosis. However, the related mechanisms remain largely unclear. In this study, we identified a novel anti-atherosclerotic mechanism of quercetin inhibiting macrophage pyroptosis by activating NRF2 through binding to the Arg483 site of KEAP1 competitively. In ApoE-/- mice fed with high fat diet, quercetin administration attenuated atherosclerosis progression by reducing oxidative stress level and suppressing macrophage pyroptosis. At the cellular level, quercetin suppressed THP-1 macrophage pyroptosis induced by ox-LDL, demonstrated by inhibiting NLRP3 inflammasome activation and reducing ROS level, while these effects were reversed by the specific NRF2 inhibitor (ML385). Mechanistically, quercetin promoted NRF2 to dissociate from KEAP1, enhanced NRF2 nuclear translocation as well as transcription of downstream antioxidant protein. Molecular docking results suggested that quercetin could bind with KEAP1 at Arg415 and Arg483. In order to verify the binding sites, KEAP1 mutated at Arg415 and Arg483 to Ser (R415S and R483S) was transfected into THP-1 macrophages, and the anti-pyroptotic effect of quercetin was abrogated by Arg483 mutation, but not Arg415 mutation. Furthermore, after administration of adeno associated viral vector (AAV) with AAV-KEAP1-R483S, the anti-atherosclerotic effects of quercetin were almost abolished in ApoE-/- mice. These findings proved quercetins suppressed macrophage pyroptosis by targeting KEAP1/NRF2 interaction, and provided reliable data on the underlying mechanism of natural antioxidants to protect against atherosclerosis.

Living-DNA Nanogel Appendant Enables In Situ Modulation and Quantification of Regulation Effects on Membrane Proteins.

Screening appendants on membrane proteins to understand their varied regulation effects is desirable for finding the potential candidates of the membrane-protein-targeted drugs. However, most artificial appendants can hardly support in situ condition screening because they cannot evolve in situ, neither can they send out signals to reflect the modulation. Here, we designed living-DNA appendants to enable such screening. First, the living-cell rolling-circle amplification (LCRCA) strategy was developed to elongate the DNA appendants for self-tangled physical nanogels. The nanogels unify both the functions of membrane-protein modulation and quantification: their sizes increase with the increased time length of LCRCA, which change the regulation effect on the membrane proteins; their large number of repeating short sequences allow quantification of their sizes in the presence of the complementary fluorophore-tagged short DNA. Then, the performance of the living-DNA appendants was examined taking α6ß4 integrins as the target, where effective regulation over the distribution of actin filaments, cell viability, and chances of anoikis are all validated. The screening also clearly elucidates the interesting nonlinear relationships between the regulations and the effects. We hope this screening strategy based on living-DNA appendants can stand for a prototype for deeper understanding of natural behaviors of membrane proteins and help in the accurate designing of the membrane-protein-targeted drugs.

Large scale lithography-free nano channel array on polystyrene.

This paper reports a new fabrication method of lithography-free nanochannel array. It is based on the cracking process on the surface of a polystyrene (PS) Petri-dish, one type of thermoplastic that is composed of uni-axial macromolecular chains. Under proper conditions, parallel nanochannels with equal interspaces are obtained. Control over the channel depth from 20 nm to 200 nm is achieved, with the channel length reaching tens of millimetres. The PDMS replication based on PS nanochannel array has been successfully carried out. In combination with the microstructure, both an ion enrichment device and a current rectification device are fabricated, and their quantified characters manifested the applicability of the channel array structure in nanofluidics.

Electrolytes for Lithium- and Sodium-Metal Batteries.

High-energy-density batteries have attracted significant attention due to the huge demand in electric transportation in future. Metal-based batteries, especially lithium metal batteries (LMBs) and sodium metal batteries (SMBs), have been hot research topics nowadays. The uncontrolled growth of metal dendrites has retarded the development of LMBs and SMBs. Various electrolytes have been explored to meet the demand of high-performance metal-based batteries, such as additives-contained electrolytes, polymer electrolytes, and solid-state electrolytes. To guide the development of electrolytes in LMBs and SMBs, we organize this roadmap to give out the status of present research and future challenges in this field. We also hope that the readers can get the knowledge and ideas from this roadmap.

Enhanced Performance of Li6.4La3Zr1.4Ta0.6O12 Solid Electrolyte by the Regulation of Grain and Grain Boundary Phases.

The application of Li-ion conducting garnet electrolytes is challenged by their large interfacial resistance with the metallic lithium anode and the relative small critical current density at which the lithium dendrites short-circuit the battery. Both of these challenges are closely related to the morphology and the structure of the garnet membranes. Here, we prepared four polycrystalline garnet Li6.4La3Zr1.4Ta0.6O12 (LLZTO) pellets with different particle sizes (nano/micro) and grain boundary additive (with/without Al2O3) to investigate the influence of grain size, the composition of the grain boundary, and the mechanical strength of the pellet on the total Li-ion conduction of the pellet, Li/garnet interfacial transfer, and lithium dendrite growth in all-solid-state Li-metal cells. The results showed that the garnet pellets prepared with nanoparticles and LiAlO2-related grain boundary phase had decreased total Li-ion conductivity because of the increased resistance of the grain boundary; however, these pellets showed higher mechanical strength and improved capability to suppress lithium dendrite growth at high current densities. By controlling the grain size and optimizing the grain boundary with Al2O3 sintering additive, the hot-pressing sintered LLZTO solid electrolytes can reach up to 1.01 × 10-3 S cm-1 in Li+ conductivity and 0.29 eV in activation energy. LLZTO with nanosized grain and LiAlO2-modified grain boundary showed the highest critical current density, which is 0.6 mA cm-2 at room temperature and 1.7 mA cm-2 at 60 °C. This study offers a useful guideline for preparing a high-performance LLZTO solid electrolyte.

Bis(µ-4-nitro-phthalato)bis-[diaqua-(1,10-phenanthroline)manganese(II)].

In the title compound, [Mn(2)(C(8)H(3)NO(6))(2)(C(12)H(8)N(2))(2)(H(2)O)(4)], the Mn(II) atom in the centrosymmetric binuclear unit has a distorted octa-hedral geometry and is coordinated by a chelating 1,10-phenanthroline ligand, two monodentate carboxyl-ate anions from two 4-nitro-phthalates and two coordinated water mol-ecules. The two Mn(II) ions in the mol-ecule are bridged by two 4-nitro-phthalate anions, both in a bis-monodentate mode, which finally leads to the formation of the binuclear unit. Intra-molecular O-H⋯O hydrogen bonds between the coordinated and uncoordinated O atoms of one monodentate carboxyl-ate group and the corresponding coordinated water mol-ecules result in an eight-membered and two six-membered rings. In the crystal structure, inter-molecular O-H⋯O hydrogen bonds link the dinuclear mol-ecules into supra-molecular chains propagating parallel to [100].

Baicalein and baicalin promote antitumor immunity by suppressing PD-L1 expression in hepatocellular carcinoma cells.

Blocking the PD-L1/PD-1 pathway to prevent the immune evasion of tumor cells is a powerful approach for treating multiple cancers, including hepatocellular carcinoma (HCC). Previous studies have shown that baicalein and baicalin are directly cytotoxic to some tumors, here we demonstrate that in addition to direct cytotoxicity, these two flavonoids stimulate the T cell mediated immune response against tumors through reduction of PD-L1 expression in cancer cells. Interestingly, more significant tumor regression was observed in BALB/c mice than in BALB/c-nu/nu mice after baicalein and baicalin treatment. PD-L1 upregulation induced by interferon-γ (IFN-γ) was significantly inhibited by these two flavonoids in vitro. Both baicalein and baicalin enhanced the cytotoxicity of T cells to eliminate tumor cells, which was abrogated after HCC cells were transfected with a PD-L1 overexpression plasmid or after T cells were pretreated with an anti-PD-1 blocking antibody. Further mechanistic research indicated that the IFN-γ-induced expression and promoter activity of PD-L1 were suppressed by these two flavonoids, and these effects were mediated by STAT3 activity inhibition. Therefore, baicalein and baicalin decreased STAT3 activity, further downregulated IFN-γ-induced PD-L1 expression and subsequently restored T cell sensitivity to kill tumor cells. Our findings provide novel insight into the anticancer effects of baicalein and baicalin through which tumor growth is inhibited by PD-L1 expression downregulation and suggest that these flavonoids have great potential for clinical treatment.