Understanding asymmetric switching times in accumulation mode organic electrochemical transistors.

Understanding the factors underpinning device switching times is crucial for the implementation of organic electrochemical transistors in neuromorphic computing, bioelectronics and real-time sensing applications. Existing models of device operation cannot explain the experimental observations that turn-off times are generally much faster than turn-on times in accumulation mode organic electrochemical transistors. Here, using operando optical microscopy, we image the local doping level of the transistor channel and show that turn-on occurs in two stages-propagation of a doping front, followed by uniform doping-while turn-off occurs in one stage. We attribute the faster turn-off to a combination of engineering as well as physical and chemical factors including channel geometry, differences in doping and dedoping kinetics and the phenomena of carrier-density-dependent mobility. We show that ion transport limits the operation speed in our devices. Our study provides insights into the kinetics of organic electrochemical transistors and guidelines for engineering faster organic electrochemical transistors.

Non-Halogenated Solvents Processed Efficient ITO-Free Flexible Organic Solar Cells with Upscaled Area.

Organic solar cells (OSCs) show the potential to harness solar energy at a lower cost and in a greener way with the merits of mechanical flexibility and potential low-cost upscaling production with solution processing. Meanwhile, the common use of toxic halogenated solvents causes pollution to the natural environment, and thus, needs to be avoided. Following the authors' previous work on the design of top-illuminated ultrathin Ag-based device structure highlighting most merits of OSC, herein non-halogen solvent and additive processing OSCs are presented, which exhibit high power conversion efficiency (PCE) of 17.64%, close to the best PCE with the commonly used halogen solvent. Interestingly, it is observed that the additive and the multicomponent strategy (blending third component BTP-S2 into PM6:L8-BO binary blend) synergistically affect the optimal morphology and device performance. Finally, OSC devices featuring green solvent processing, indium tin oxide-free, flexibility, and upscaling merits are fabricated and exhibit the best PCE of 13.76% with high mechanical robustness and good stability against heat or light illumination. This work provides a prospective potential for manufacturing the OSC toward practical applications.

A Reversible Structural Phase Transition by Electrochemically-Driven Ion Injection into a Conjugated Polymer.

We find that conjugated polymers can undergo reversible structural phase transitions during electrochemical oxidation and ion injection. We study poly[2,5-bis(thiophenyl)-1,4-bis(2-(2-(2-methoxyethoxy)ethoxy)ethoxy)benzene] (PB2T-TEG), a conjugated polymer with glycolated side chains. Using grazing incidence wide-angle X-ray scattering (GIWAXS), we show that, in contrast to previously known polymers, this polymer switches between two structurally distinct crystalline phases associated with electrochemical oxidation/reduction in an aqueous electrolyte. Importantly, we show that this unique phase change behavior has important physical consequences for ion-polaron pair transport. Notably, using moving front experiments visualized by both optical microscopy and super-resolution photoinduced force microscopy (PiFM), we show that a laterally propagating ion-polaron pair front in PB2T-TEG exhibits non-Fickian transport, retaining a sharp step-edge profile, in stark contrast to the Fickian diffusion more commonly observed in polymers like P3MEEMT. This structural phase transition is reminiscent of those accompanying ion uptake in inorganic materials like LiFePO4. We propose that the engineering of similar properties in future conjugated polymers may enable the realization of new materials with superior performance in electrochemical energy storage or neuromorphic memory applications.

Multifunctional Hybrid Interfacial Layers for High-Performance Inverted Perovskite Solar Cells.

Challenges remain hindering the performance and stability of inverted perovskite solar cells (PSCs), particularly for the nonstable interface between lead halide perovskite and charge extraction metal oxide layer. Herein, a simple yet scalable interfacial strategy to facilitate the assemble of high-performance inverted PSCs and scale-up modules is reported. The hybrid interfacial layer containing self-assembly triphenylamine and conjugated poly(arylamine) simultaneously improves the chemical stability, charge extraction, and energy level alignment of hole-selective interface, meanwhile promoting perovskite crystallization. Consequently, the correspondent inverted PSCs and modules achieve remarkable power conversion efficiencies (PCEs) of 24.5% and 20.7% (aperture area of 19.4 cm2 ), respectively. The PSCs maintain over 80% of its initial efficiency under one-sun equivalent illumination of 1200 h. This strategy is also effective to perovskite with various bandgaps, demonstrating the highest PCE of 19.6% for the 1.76-eV bandgap PSCs. Overall, this work provides a simple yet scalable interfacial strategy for obtaining state-of-the-art inverted PSCs and modules.

Balancing the Selective Absorption and Photon-to-Electron Conversion for Semitransparent Organic Photovoltaics with 5.0% Light-Utilization Efficiency.

Efficiently converting invisible light while allowing full visible light transmission is key to achieving high-performance semitransparent organic photovoltaics (ST-OPVs). Here, a detailed balance strategy is explored to optimize the ST-OPV via taking both absorption and carrier dynamics into consideration. Based on this principle, comprehensive optimizations are carried out, including a ternary strategy, donor:acceptor blend ratio, thickness, antireflection, etc., to compromise the invisible energy conversion and visible transmission for high-performance ST-OPVs. As a result, the opaque OPV device exhibits a champion power conversion efficiency of 19.35% (certificated 19.07%), and most strikingly, the best ST-OPV shows a remarkably high light-utilization efficiency of 5.0%, where the efficiency and the average visible transmission are 12.95% and 38.67%, respectively. An efficiency of 12.09% is achieved on the upscaled device with an area of 1.05 cm2 , demonstrating its promise for large-area fabrication. These results are among the best values for ST-OPVs. Besides, it is demonstrated that the ST-OPV exhibits good infrared light-reflection capability for thermal control. This work provides a rational design of balancing the absorbing selectivity and photon-to-electron conversion for high-performance ST-OPVs, and may pave the way toward the practical application of solar windows.

High-Performance Organic Solar Modules via Bilayer-Merged-Annealing Assisted Blade Coating.

Although encouraging progress is being made on spin-coated prototype cells, organic solar cells (OSCs) still face significant challenges, yet to be explored, for upscaling the multi-stacked photoactive layers in the construction of large-area modules. Herein, high-performance opaque and semitransparent organic solar modules are developed via a bilayer-merged-annealing (BMA)-assisted blade-coating strategy, achieving impressive efficiencies of 14.79% and 12.01% with respect to active area of 18.73 cm2 , which represent the best organic solar minimodules so far. It is revealed that the BMA strategy effectively resolves the de-wetting issues between polar charge transport layer solution and non-polar bulk heterojunction blends, hence improving the film coverage, along with electronic and electric contacts of multi-stacked photoactive layers. As result, organic solar modules coated under ambient conditions successfully retain the high-efficiency of small-area cells upon 312 times area scaling-up. Overall, this work provides a facile and effective method to fabricate high-performance organic solar modules under ambient conditions.

High-Efficiency ITO-Free Organic Photovoltaics with Superior Flexibility and Upscalability.

Developing indium-tin-oxide (ITO)-free flexible organic photovoltaics (OPVs) with upscaling capacity is of great significance for practical applications of OPVs. Unfortunately, the efficiencies of the corresponding devices lag far behind those of ITO-based rigid small-area counterparts. To address this issue, an advanced device configuration is designed and fabricated featuring a top-illuminated structure with ultrathin Ag as the transparent electrode. First, a conjugated polyelectrolyte layer, i.e., PCP-Li, is inserted to effectively connect the bottom Ag anode and the hole transport layer, achieving good photon to electron conversion. Second, charge collecting grids are deposited to suppress the increased resistance loss with the upscaling of the device area, realizing almost full retention of device efficiency from 0.06 to 1 cm2 . Third, the designed device delivers the best efficiency of 15.56% with the area of 1 cm2 on polyimide substrate, representing as the record among the ITO-free, large-area, flexible OPVs. Interestingly, the device exhibits no degradation after 100 000 bending cycles with a radius of 4 mm, which is the best result for flexible OPVs. This work provides insight into device structure design and optimization for OPVs with high efficiency, low cost, superior flexibility, and upscaling capacity, indicating the potential for the future commercialization of OPVs.

Self-Assembled Donor-Acceptor Dyad Molecules Stabilize the Heterojunction of Inverted Perovskite Solar Cells and Modules.

The heterointerface between a semiconducting metal oxide and a perovskite critically impacts on the overall performance of perovskite solar cells (PVSCs). Herein, we report a feasible yet effective strategy to suppress the interfacial reaction between nickel oxide and the perovskite via chemical passivation with self-assembled dyad molecules, which leads to the simultaneous improvement of the power conversion efficiencies (PCEs) and operational lifetimes of inverted PVSCs. As a result, inverted PVSCs consisting of simple methylammonium iodide perovskites have achieved an excellent PCE of 20.94% and decent photostability with 93% of the initial value after 600 h of 1 sun equivalent illumination. Moreover, this strategy can be readily translated into slot-die fabrication of perovskite modules, achieving a high PCE of 14.90% with an area of 19.16 cm2 (no shade in the interconnecting area) and a geometrical fill factor of 93%. Overall, this work provides an effective strategy to stabilize the vulnerable heterointerface in PVSCs.

Fullerene Active Layers for n-Type Organic Electrochemical Transistors.

Organic electrochemical transistors (OECTs) are currently being developed for applications ranging from bioelectronics to neuromorphic computing. We show that fullerene derivatives with glycolated side chains can serve as n-type active layers for OECTs with figures of merit exceeding the best reported conjugated-polymer-based n-type OECTs. By comparing two different fullerene derivatives, [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) and 2-(2,3,4-tris(methoxtriglycol) phenyl) [60]fulleropyrrolidine (C60-TEG), we find that the hydrophilic glycolated side chains in C60-TEG enable volumetric doping of C60-TEG films. In contrast, the hydrophobic nature of PCBM prevents ions from penetrating into the material. Our results demonstrate that small-molecule semiconductors follow many of the same design principles established for conjugated polymers and can function as high-performing mixed electronic/ionic conductors for efficient, fast OECTs.

Highly Efficient Organic Solar Cells Consisting of Double Bulk Heterojunction Layers.

An organic solar cell (OSCs) containing double bulk heterojunction (BHJ) layers, namely, double-BHJ OSCs is constructed via stamp transferring of low bandgap BHJ atop of mediate bandgap active layers. Such devices allow a large gain in photocurrent to be obtained due to enhanced photoharvest, without suffering much from the fill factor drop usually seen in thick-layer-based devices. Overall, double-BHJ OSC with optimal ≈50 nm near-infrared PDPP3T:PC71 BM layer atop of ≈200 nm PTB7-Th:PC71 BM BHJ results in high power conversion efficiencies over 12%.