Fabrication of red-emitting perovskite LEDs by stabilizing their octahedral structure.

Light-emitting diodes (LEDs) based on metal halide perovskites (PeLEDs) with high colour quality and facile solution processing are promising candidates for full-colour and high-definition displays1-4. Despite the great success achieved in green PeLEDs with lead bromide perovskites5, it is still challenging to realize pure-red (620-650 nm) LEDs using iodine-based counterparts, as they are constrained by the low intrinsic bandgap6. Here we report efficient and colour-stable PeLEDs across the entire pure-red region, with a peak external quantum efficiency reaching 28.7% at 638 nm, enabled by incorporating a double-end anchored ligand molecule into pure-iodine perovskites. We demonstrate that a key function of the organic intercalating cation is to stabilize the lead iodine octahedron through coordination with exposed lead ions and enhanced hydrogen bonding with iodine. The molecule synergistically facilitates spectral modulation, promotes charge transfer between perovskite quantum wells and reduces iodine migration under electrical bias. We realize continuously tunable emission wavelengths for iodine-based perovskite films with suppressed energy loss due to the decrease in bond energy of lead iodine in ionic perovskites as the bandgap increases. Importantly, the resultant devices show outstanding spectral stability and a half-lifetime of more than 7,600 min at an initial luminance of 100 cd m-2.

Tautomeric mixture coordination enables efficient lead-free perovskite LEDs.

Lead halide perovskite light-emitting diodes (PeLEDs) have demonstrated remarkable optoelectronic performance1-3. However, there are potential toxicity issues with lead4,5 and removing lead from the best-performing PeLEDs-without compromising their high external quantum efficiencies-remains a challenge. Here we report a tautomeric-mixture-coordination-induced electron localization strategy to stabilize the lead-free tin perovskite TEA2SnI4 (TEAI is 2-thiopheneethylammonium iodide) by incorporating cyanuric acid. We demonstrate that a crucial function of the coordination is to amplify the electronic effects, even for those Sn atoms that aren't strongly bonded with cyanuric acid owing to the formation of hydrogen-bonded tautomeric dimer and trimer superstructures on the perovskite surface. This electron localization weakens adverse effects from Anderson localization and improves ordering in the crystal structure of TEA2SnI4. These factors result in a two-orders-of-magnitude reduction in the non-radiative recombination capture coefficient and an approximately twofold enhancement in the exciton binding energy. Our lead-free PeLED has an external quantum efficiency of up to 20.29%, representing a performance comparable to that of state-of-the-art lead-containing PeLEDs6-12. We anticipate that these findings will provide insights into the stabilization of Sn(II) perovskites and further the development of lead-free perovskite applications.

Anisotropic Heavy-Metal-Free Semiconductor Nanocrystals: Synthesis, Properties, and Applications.

Heavy-metal (Cd, Hg, and Pb)-containing semiconductor nanocrystals (NCs) have been explored widely due to their unique optical and electrical properties. However, the toxicity risks of heavy metals can be a drawback of heavy-metal-containing NCs in some applications. Anisotropic heavy-metal-free semiconductor NCs are desirable replacements and can be realized following the establishment of anisotropic growth mechanisms. These anisotropic heavy-metal-free semiconductor NCs can possess lower toxicity risks, while still exhibiting unique optical and electrical properties originating from both the morphological and compositional anisotropy. As a result, they are promising light-emitting materials in use various applications. In this review, we provide an overview on the syntheses, properties, and applications of anisotropic heavy-metal-free semiconductor NCs. In the first section, we discuss hazards of heavy metals and introduce the typical heavy-metal-containing and heavy-metal-free NCs. In the next section, we discuss anisotropic growth mechanisms, including solution-liquid-solid (SLS), oriented attachment, ripening, templated-assisted growth, and others. We discuss mechanisms leading both to morphological anisotropy and to compositional anisotropy. Examples of morphological anisotropy include growth of nanorods (NRs)/nanowires (NWs), nanotubes, nanoplatelets (NPLs)/nanosheets, nanocubes, and branched structures. Examples of compositional anisotropy, including heterostructures and core/shell structures, are summarized. Third, we provide insights into the properties of anisotropic heavy-metal-free NCs including optical polarization, fast electron transfer, localized surface plasmon resonances (LSPR), and so on, which originate from the NCs' anisotropic morphologies and compositions. Finally, we summarize some applications of anisotropic heavy-metal-free NCs including catalysis, solar cells, photodetectors, lighting-emitting diodes (LEDs), and biological applications. Despite the huge progress on the syntheses and applications of anisotropic heavy-metal-free NCs, some issues still exist in the novel anisotropic heavy-metal-free NCs and the corresponding energy conversion applications. Therefore, we also discuss the challenges of this field and provide possible solutions to tackle these challenges in the future.

Efficient, Color-Stable, Pure-Blue Light-Emitting Diodes Based on Aromatic Ligand-Engineered Perovskite Nanoplatelets.

Perovskite nanoplatelets (NPLs) show great potential for high-color-purity light-emitting diodes (LEDs) due to their narrow line width and high exciton binding energy. However, the performance of perovskite NPL LEDs lags far behind perovskite quantum dot-/film-based LEDs, owing to their material instability and poor carrier transport. Here, we achieved efficient and stable pure blue-emitting CsPbBr3 NPLs with outstanding optical and electrical properties by using an aromatic ligand, 4-bromothiophene-2-carboxaldehyde (BTC). The BTC ligands with thiophene groups can guide two-dimensional growth and inhibit out-of-plane ripening of CsPbBr3 NPLs, which, meanwhile, increases their structural stability via strongly interacting with PbBr64- octahedra. Moreover, aromatic structures with delocalized π-bonds facilitate charge transport, diminish band tail states, and suppress Auger processes in CsPbBr3 NPLs. Consequently, the LEDs demonstrate efficient and color-stable blue emissions at 465 nm with a narrow emission line width of 17 nm and a maximum external quantum efficiency (EQE) of 5.4%, representing the state-of-the-art CsPbBr3 NPL LEDs.

High-Efficiency and Stable Colloidal One-Dimensional Core/Shell Nanorod Light-Emitting Diodes.

Anisotropic nanocrystals such as nanorods (NRs) display unique linearly polarized emission, which is expected to break the external quantum efficiency (EQE) limit of quantum dot-based light-emitting diodes (LEDs). However, the progress in achieving a higher EQE using NRs encounters several challenges, primarily involving a low photoluminescence quantum yield (PLQY) of NRs and imbalanced charge injection in NR-LEDs. In this work, we investigated NR-LEDs based on CdSe/CdZnS/ZnS rod-in-rod NRs with a high PLQY and higher linear polarization compared to those of dot-in-rod NRs. The balanced charge injection is achieved using ZnMgO nanoparticles as the electron transport layer and poly-TPD {poly[N,N'-bis(4-butylphenyl)-N,N'-bis(phenyl)benzidine]} as the hole transport layer. Therefore, the NR-LEDs exhibit a maximum EQE of 21.5% and a maximum luminance of >120 000 cd/m2 owing to the high level of in-plane transitions with a dipole moment of 90%. The NR-LEDs also have greatly inhibited droop in EQE under a high current density as well as outstanding operation lifetime and cycle stability.

Entropy-Driven Strongly Confined Low-Toxicity Pure-Red Perovskite Quantum Dots for Spectrally Stable Light-Emitting Diodes.

Spectrally stable pure-red perovskite quantum dots (QDs) with low lead content are essential for high-definition displays but are difficult to synthesize due to QD self-purification. Here, we make use of entropy-driven quantum-confined pure-red perovskite QDs to fabricate light-emitting diodes (LEDs) that have low toxicity and are efficient and spectrum-stable. Based on experimental data and first-principles calculations, multiple element alloying results in a 60% reduction in lead content while improving QD entropy to promote crystal stability. Entropy-driven QDs exhibit photoluminescence with 100% quantum yields and single-exponential decay lifetimes without alteration of their morphology or crystal structure. The pure-red LEDs utilizing entropy-driven QDs have spectrally stable electroluminescence, achieving a brightness of 4932 cd/m2, a maximum external quantum efficiency of over 20%, and a 15-fold longer operational lifetime than the CsPbI3 QD-based LEDs. These achievements demonstrate that entropy-driven QDs can mitigate local compositional heterogeneity and ion migration.

High-Performance Blue Perovskite Light-Emitting Diodes Enabled by Synergistic Effect of Additives.

While quasi-two-dimensional (quasi-2D) perovskites have good properties of cascade energy transfer, high exciton binding energy, and high quantum efficiency, which will benefit high-efficiency blue PeLEDs, inefficient domain distribution management and unbalanced carrier transport impede device performance improvement. Herein, (2-(9H-carbazol-9-yl)ethyl)phosphonic acid (2PACz) and methyl 2-aminopyridine-4-carboxylate (MAC) were simultaneously introduced to a blue quasi-2D perovskite film. Relying on the synergistic effect of 2PACz and MAC, it not only modulates the phase distribution inhibiting the n = 2 phase but also greatly improves the electrical property of the quasi-2D perovskite film. As a result, the as-modified blue quasi-2D PeLED demonstrated an external quantum efficiency (EQE) of 17.08% and a luminance of 10142 cd m-2. This study exemplifies the synergistic effect among dual additives and offers a new effective additive strategy modulating phase distribution and building balanced carrier transport, which paves the way for the fabrication of highly efficient blue PeLEDs.

Correction: Atomically flat semiconductor nanoplatelets for light-emitting applications.

Correction for 'Atomically flat semiconductor nanoplatelets for light-emitting applications' by Bing Bai et al., Chem. Soc. Rev., 2023, 52, 318-360, https://doi.org/10.1039/D2CS00130F.

Atomically flat semiconductor nanoplatelets for light-emitting applications.

The last decade has witnessed extensive breakthroughs and significant progress in atomically flat two-dimensional (2D) semiconductor nanoplatelets (NPLs) in terms of synthesis, growth mechanisms, optical and electronic properties and practical applications. Such NPLs have electronic structures similar to those of quantum wells in which excitons are predominantly confined along the vertical direction, while electrons are free to move in the lateral directions, resulting in unique optical properties, such as extremely narrow emission line width, short photoluminescence (PL) lifetime, high gain coefficient, and giant oscillator strength transition (GOST). These unique optical properties make NPLs favorable for high color purity light-emitting applications, in particular in light-emitting diodes (LEDs), backlights for liquid crystal displays (LCDs) and lasers. This review article first introduces the intrinsic characteristics of 2D semiconductor NPLs with atomic flatness. Subsequently, the approaches and mechanisms for the controlled synthesis of atomically flat NPLs are summarized followed by an insight on recent progress in the mediation of core/shell, core/crown and core/crown@shell structures by selective epitaxial growth of passivation layers on different planes of NPLs. Moreover, an overview of the unique optical properties and the associated light-emitting applications is elaborated. Despite great progress in this research field, there are some issues relating to heavy metal elements such as Cd2+ in NPLs, and the ambiguous gain mechanisms of NPLs and others are the main obstacles that prevent NPLs from widespread applications. Therefore, a perspective is included at the end of this review article, in which the current challenges in this stimulating research field are discussed and possible solutions to tackle these challenges are proposed.

Universal Molecular Control Strategy for Scalable Fabrication of Perovskite Light-Emitting Diodes.

Despite the rapid progress in perovskite light-emitting diodes (PeLEDs), the electroluminescence performance of large-area perovskite devices lags far behind that of laboratory-size ones. Here, we report a 3.5 cm × 3.5 cm large-area PeLED with a record-high external quantum efficiency of 12.1% by creating an amphipathic molecular interface modifier of betaine citrate (BC) between the perovskite layer and the underlying hole transport layer (HTL). It is found that the surface wettability for various HTLs can be efficiently improved as a result of the coexistence of methyl and carboxyl groups in the BC molecules that makes favorable groups to selectively contact with the HTL surface and increases the surface free energy, which greatly facilitates the scalable process of solution-processed perovskite films. Moreover, the luminous performance of perovskite emitters is simultaneously enhanced through the coordination between C═O in the carboxyl groups and Pb dangling bonds.

Fine-Tuning Crystal Structures of Lead Bromide Perovskite Nanocrystals through Trace Cadmium(II) Doping for Efficient Color-Saturated Green LEDs.

Decreasing perovskite nanocrystal size increases radiative recombination due to the quantum confinement effect, but also increases the Auger recombination rate which leads to carrier imbalance in the emitting layers of electroluminescent devices. Here, we overcome this trade-off by increasing the exciton effective mass without affecting the size, which is realized through the trace Cd2+ doping of formamidinium lead bromide perovskite nanocrystals. We observe an ~2.7 times increase in the exciton binding energy benefiting from a slight distortion of the [BX6]4- octahedra caused by doping in the case of that the Auger recombination rate is almost unchanged. As a result, bright color-saturated green emitting perovskite nanocrystals with a photoluminescence quantum yield of 96 % are obtained. Cd2+ doping also shifts up the energy levels of the nanocrystals, relative to the Fermi level so that heavily n-doped emitters convert into only slightly n-doped ones; this boosts the charge injection efficiency of the corresponding light-emitting diodes. The light-emitting devices based on those nanocrystals reached a high external quantum efficiency of 29.4 % corresponding to a current efficiency of 123 cd A-1, and showed dramatically improved device lifetime, with a narrow bandwidth of 22 nm and Commission Internationale de I'Eclairage coordinates of (0.20, 0.76) for color-saturated green emission for the electroluminescence peak centered at 534 nm, thus being fully compliant with the latest standard for wide color gamut displays.

Core/Shell ZnO/ZnS Nanoparticle Electron Transport Layers Enable Efficient All-Solution-Processed Perovskite Light-Emitting Diodes.

Solution-processed perovskite-based light-emitting diodes (PeLEDs) are promising candidates for low-cost, large-area displays, while severe deterioration of the perovskite light-emitting layer occurs during deposition of electron transport layers from solution in an issue. Herein, core/shell ZnO/ZnS nanoparticles as a solution-processed electron transport layer in PeLED based on quasi-2D PEA2 Csn-1 Pbn Br3n+1 (PEA = phenylethylammonium) perovskite are employed. The deposition of ZnS shell mitigates trap states on ZnO core by anchoring sulfur to oxygen vacancies, and at the same time removes residual hydroxyl groups, which helps to suppress the interfacial trap-assisted non-radiative recombination and the deprotonation reaction between the perovskite layer and ZnO. The core/shell ZnO/ZnS nanoparticles show comparably high electron mobility to pristine ZnO nanoparticles, combined with the reduced energy barrier between the electron transport layer and the perovskite layer, improving the charge injection balance in PeLEDs. As a result, the optimized PeLEDs employing core/shell ZnO/ZnS nanoparticles as a solution-processed electron transport layer exhibit high peak luminance reaching 32 400 cd m-2 , external quantum efficiency of 10.3%, and 20-fold extended longevity as compared to the devices utilizing ZnO nanoparticles, which represents one of the highest overall performances for solution-processed PeLEDs.

Vertical tubular zinc oxide microcavity enables efficient colloidal quantum dot lasing.

Colloidal quantum dots (CQDs) can potentially enable new classes of highly flexible, spectrally tunable lasers processible from solutions. Despite a considerable progress over the past years, colloidal-QD lasing is still an important challenge. We report vertical tubular zinc oxide (VT-ZnO) and lasing based on VT-ZnO/CsPb(Br0.5Cl0.5)3 CQDs composite. Due to regular hexagonal structure and smooth surface of VT-ZnO, the light emitted at around 525 nm is effectively modulated under 325 nm continuous excitation. The VT-ZnO/ CQDs composite finally shows lasing with a threshold of ∼ 46.9 µJ.cm-2 and a Q factor of ∼ 2978 under 400 nm femtosecond (fs) excitation. This ZnO based cavity can be complexed with CQDs easily, which may pave a new way of colloidal-QD lasing.

Mixed-Dimensional MXene-Based Composite Electrodes Enable Mechanically Stable and Efficient Flexible Perovskite Light-Emitting Diodes.

Significant advancements in perovskite light-emitting diodes (PeLEDs) based on ITO glass substrates have been realized in recent years, yet the overall performance of flexible devices still lags far behind, mainly being ascribed to the high surface roughness and poor optoelectronic properties of flexible electrodes. Here, we report efficient and robust flexible PeLEDs based on a mixed-dimensional (0D-1D-2D-3D) composite electrode consisting of 0D Ag nanoparticles (AgNPs)/1D Ag nanowires (AgNWs)/2D MXene/3D poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). Our designed MXene-based electrodes combine the advantages of facile formation of a film of low-dimensional materials and excellent optical and electrical properties of metal, inorganic, and organic semiconductors, which endow the electrodes with high electrical/thermal conductivity, flexibility, a smooth surface, and good transmittance. Consequently, the resulting flexible PeLEDs (without a light-coupling structure) demonstrate a record external quantum efficiency of 16.5%, a high luminance of close to 50000 cd/m2, a large emitting area of 8 cm2, and significantly enhanced mechanical stability.

A Multifunctional Ionic Liquid Additive Enabling Stable and Efficient Perovskite Light-Emitting Diodes.

The electroluminescence performance and long-term stability of perovskite light-emitting diodes (PeLEDs) are greatly affected by the film quality of perovskite emitting layer. Herein, the authors employ an ionic liquid, 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIm]OTf), to manipulate the growth of quasi-2D perovskite films by providing heterogeneous nucleation sites. The [BMIm]OTf molecules simultaneously realize uniform perovskite films by reducing the contact angles of precursor solution on the hole transport layer (HTL), and eliminate defect states through bonding [BMIm]+ cations to negatively-charged uncoordinated Br and OTf- anions to uncoordinated Pb2+ defects that effectively suppresses the defect states assisted nonradiative recombination in perovskite films. As a result, the efficiency and the operational lifetime of the resultant PeLED are enhanced by more than twofold and threefold, respectively, achieving a maximum external quantum efficiency of 17.6% and an operational lifetime of over 500 min at an initial brightness of 100 cd m-2 .

Deep-Blue Electroluminescence of Perovskites with Reduced Dimensionality Achieved by Manipulating Adsorption-Energy Differences.

The lagging development of deep-blue perovskite light-emitting diodes (PeLEDs) heavily impedes their practical applications in full-color display due to the absence of spectrally stable emitters and the mismatch of carrier injection capacity. Herein, we report highly efficient deep-blue PeLEDs through a new chemical strategy that addresses the dilemma for simultaneously constant electroluminescence (EL) spectra and high-purify phase in reduced-dimensional perovskites. The success lies in the control of adsorption-energy differences between phenylbutylamine (PBA) and ethylamine (EA) interacting with perovskites, which facilitates narrow n-value distribution. This approach leads to an increased exciton binding energy and enhanced surface potential, hence improving radiative recombination. As a result, an external quantum efficiency of 4.62 % is achieved in PeLEDs with a stable EL peak at 457 nm, demonstrating the best reported result for deep-blue PeLEDs so far.

All-Inorganic Quantum Dot Light-Emitting Diodes with Suppressed Luminance Quenching Enabled by Chloride Passivated Tungsten Phosphate Hole Transport Layers.

Although excellent performance such as high efficiency and stability have been achieved in quantum dot (QD)-based light-emitting diodes (QLEDs) possessing an organic/inorganic hybrid device structure, the highly expected all-inorganic QLEDs remain at the bottleneck stage in recent years, resulting from the luminance quenching of QDs caused by inorganic hole transport layer (HTL) and unbalanced charge injection due to large energy barrier for injecting holes from HTL to QDs. Here, it is reported that the solution-processed inorganic environmentally friendly chloride (Cl)-passivated tungsten phosphate (Cl@TPA) films serve as HTL. The incorporation of Cl in TPA effectively passivates the oxygen vacancies, which not only avoids the luminescence quenching of QDs by reducing carrier concentration but also facilitates the hole injection from HTL to QDs with a favorable electronic band alignment, thus achieving the record external quantum efficiency of ≈9.27%, among all previous reports about all-inorganic QLEDs. Most importantly, the resulting all-inorganic QLEDs with Cl@TPA exhibit a substantial improvement in the operational lifetime (T50  > 105 h under an initial luminance of 100 cd m-2 ), which is almost 30-fold higher than the devices with TPA HTL. This work furnishes a promising strategy for highly efficient and stable QLEDs based on inorganic device structure.

Molecule-Induced p-Doping in Perovskite Nanocrystals Enables Efficient Color-Saturated Red Light-Emitting Diodes.

Color-saturated red light-emitting diodes (LEDs) with emission wavelengths at around 620-640 nm are an essential part of high-definition displays. Metal halide perovskites with very narrow emission linewidth are promising emitters, and rapid progress has been made in perovskite-based LEDs (PeLEDs); however, the efficiency of the current color-pure red PeLEDs-still far lags behind those of other-colored ones. Here, a simple but efficient strategy is reported to gradually down-shift the Fermi level of perovskite nanocrystals (NCs) by controlling the interaction between NCs and their surface molecular electron acceptor-benzyl iodide with aromatic rings-and realize p-doping in the color-saturated 625 nm emitting NCs, which significantly reduces the hole injection barrier in devices. Besides, both the luminescence efficiency and electric conductivity of perovskite NCs are enhanced as additional advantages as the result of surface defects passivation. As a result, the external quantum efficiency for the resulting LED is increased from 4.5% to 12.9% after benzyl iodide treatment, making this device the best-performing color-saturated red PeLED so far. It is further found that the hole injection plays a more critical role than the photoluminescence efficiency of perovskite emitter in determining the LED performance, which implies design principles for efficient thin-film planar LEDs.

Stable, Strongly Emitting Cesium Lead Bromide Perovskite Nanorods with High Optical Gain Enabled by an Intermediate Monomer Reservoir Synthetic Strategy.

One-dimensional (1D) semiconductor nanorods are important for numerous applications ranging from optics and electronics to biology, yet the direct synthesis of high-quality metal halide perovskite nanorods remains a challenge. Here, we develop an intermediate monomer reservoir synthetic strategy to realize the controllable growth of uniform and low-defect CsPbBr3 perovskite nanorods. Intermediates composed of CsPb2Br5 and Cs3In2Br9 are obtained through the substitution of Pb2+ with In3+ cations in the template of CsPbBr3 nanocubes and act as a precursor reservoir to gradually release monomers, ensuring both the slow growth rate and low defects of nanorods. We have used branched tris(diethylamino)phosphine as a ligand, which not only has unequal binding energies with different crystal faces to promote the orientation growth but also provides strong steric hindrance to shield the nanorods in solution. Because of minor amount of defects and an effective ligand passivation, in addition to significantly enhanced stability, the perovskite nanorods show a high photoluminescence quantum yield of up to 90% and exhibit a net mode gain of 980 cm-1, the latter being a record value among all the perovskite materials. An extremely low amplified spontaneous emission threshold of 7.5 µJ cm-2 is obtained under excitation by a nanosecond laser, which is comparable to that obtained using femtosecond lasers in other recent studies.