Fabrication of conductive silver paste recovered from leaching of waste catalyst using hydrochloric acid.

Transition metal compounds based on silver (Ag) and palladium (Pd) are extensively used as catalysts in the petrochemical industries. The catalytic activities of Ag and Pd decrease over time and hence need to be discarded. The recovery of elements like Ag from waste catalyst is essential because of its limited availability and cost, and it is environmentally beneficial with regards to recycling. In this study, Pd and Ag were leached from waste catalyst providing an alternative source suitable for a Ag paste electrode. Through an efficient reduction process, AgCl particles were obtained which serve as a precursor to synthesize Ag using ammonia as the solvent. The obtained Ag was fabricated to Ag paste by using mixed dispersion and solvent. The electrical resistivity of the Ag paste was recorded as 6.14 µΩ cm at 417 °C in a hydrogen atmosphere.

Acid mine drainage formation and arsenic mobility under strongly acidic conditions: Importance of soluble phases, iron oxyhydroxides/oxides and nature of oxidation layer on pyrite.

Acid mine drainage (AMD) formation and toxic arsenic (As) pollution are serious environmental problems encountered worldwide. In this study, we investigated the crucial roles played by common secondary mineral phases formed during the natural weathering of pyrite-bearing wastes-soluble salts (melanterite, FeSO4·7H2O) and metal oxides (hematite, Fe2O3)-on AMD formation and As mobility under acidic conditions (pH 1.5-4) prevalent in historic tailings storage facilities, pyrite-bearing rock dumps and AMD-contaminated soils and sediments. Our results using a pyrite-rich natural geological material containing arsenopyrite (FeAsS) showed that melanterite and hematite both directly-by supplying H+ and/or oxidants (Fe3+)-and indirectly-via changes in the nature of oxidation layer formed on pyrite-influenced pyrite oxidation dynamics. Based on SEM-EDS, DRIFT spectroscopy and XPS results, the oxidation layer on pyrite was mainly composed of ferric arsenate and K-Jarosite when melanterite was abundant with/without hematite but changed to Fe-oxyhydroxide/oxide and scorodite when melanterite was low and hematite was present. This study also observed the formation of a mechanically 'strong' coating on pyrite that suppressed the mineral's oxidation. Finally, As mobility under acidic conditions was limited by its precipitation as ferric arsenate, scorodite, or a Fe/Al arsenate phase, including its strong adsorption to Fe-oxyhydroxides/oxides.

Enrichment of the metallic components from waste printed circuit boards by a mechanical separation process using a stamp mill.

Printed circuit boards incorporated in most electrical and electronic equipment contain valuable metals such as Cu, Ni, Au, Ag, Pd, Fe, Sn, and Pb. In order to employ a hydrometallurgical route for the recycling of valuable metals from printed circuit boards, a mechanical pre-treatment step is needed. In this study, the metallic components from waste printed circuit boards have been enriched using a mechanical separation process. Waste printed circuit boards shredded to <10mm were milled using a stamp mill to liberate the various metallic components, and then the milled printed circuit boards were classified into fractions of <0.6, 0.6-1.2, 1.2-2.5, 2.5-5.0, and >5.0mm. The fractions of milled printed circuit boards of size <5.0mm were separated into a light fraction of mostly non-metallic components and a heavy fraction of the metallic components by gravity separation using a zig-zag classifier. The >5.0mm fraction and the heavy fraction were subjected to two-step magnetic separation. Through the first magnetic separation at 700 Gauss, 83% of the nickel and iron, based on the whole printed circuit boards, was recovered in the magnetic fraction, and 92% of the copper was recovered in the non-magnetic fraction. The cumulative recovery of nickel-iron concentrate was increased by a second magnetic separation at 3000 Gauss, but the grade of the concentrate decreased remarkably from 76% to 56%. The cumulative recovery of copper concentrate decreased, but the grade increased slightly from 71.6% to 75.4%. This study has demonstrated the feasibility of the mechanical separation process consisting of milling/size classification/gravity separation/two-step magnetic separation for enriching metallic components such as Cu, Ni, Al, and Fe from waste printed circuit boards.

Interaction of Sb(III) with iron sulfide under anoxic conditions: Similarities and differences compared to As(III) interactions.

This study examined the reaction mechanism of arsenite, As(III), and antimonite, Sb(III), with iron sulfide and compared their pH-dependent reaction behaviors under strictly anoxic environments. The comparison of Sb(III) with As(III), based on their chemical similarity, may provide useful insight into understanding the geochemical behavior of the less studied Sb(III). The pH-dependent batch sorption studies revealed that As(III) and Sb(III) displayed similar removal trends with pH in terms of the removal efficiency. However, the aqueous As(III) species transformed to thioarsenite species, while aqueous Sb(III) species remained inert under the highly sulfidic anoxic system. An X-ray absorption spectroscopy study demonstrated the reaction of As(III) and Sb(III) at acidic pH was closely related to the precipitation of sulfide minerals As2S3 and Sb2S3, respectively, as a consequence of the reaction with sulfide produced through mackinawite dissolution. Meanwhile, the removal at basic pH was inferred as a surface reaction, possibly through surface complexation, surface-precipitation, or both. In this study, the pH-dependent Sb(III) uptake mechanisms proved to be similar to the corresponding mechanisms for As(III) uptake, with mackinawite demonstrating a superior capacity to scavenge Sb(III) in ferrous and sulfide-rich reducing environments.