RESUMO
Starch accounts for up to 90% of the dry weight of rice endosperm and is a key determinant of grain quality. Although starch biosynthesis enzymes have been comprehensively studied, transcriptional regulation of starch-synthesis enzyme-coding genes (SECGs) is largely unknown. In this study, we explored the role of a NAC transcription factor, OsNAC24, in regulating starch biosynthesis in rice. OsNAC24 is highly expressed in developing endosperm. The endosperm of osnac24 mutants is normal in appearance as is starch granule morphology, while total starch content, amylose content, chain length distribution of amylopectin and the physicochemical properties of the starch are changed. In addition, the expression of several SECGs was altered in osnac24 mutant plants. OsNAC24 is a transcriptional activator that targets the promoters of six SECGs; OsGBSSI, OsSBEI, OsAGPS2, OsSSI, OsSSIIIa and OsSSIVb. Since both the mRNA and protein abundances of OsGBSSI and OsSBEI were decreased in the mutants, OsNAC24 functions to regulate starch synthesis mainly through OsGBSSI and OsSBEI. Furthermore, OsNAC24 binds to the newly identified motifs TTGACAA, AGAAGA and ACAAGA as well as the core NAC-binding motif CACG. Another NAC family member, OsNAP, interacts with OsNAC24 and coactivates target gene expression. Loss-of-function of OsNAP led to altered expression in all tested SECGs and reduced the starch content. These results demonstrate that the OsNAC24-OsNAP complex plays key roles in fine-tuning starch synthesis in rice endosperm and further suggest that manipulating the OsNAC24-OsNAP complex regulatory network could be a potential strategy for breeding rice cultivars with improved cooking and eating quality.
Assuntos
Endosperma , Oryza , Endosperma/genética , Endosperma/metabolismo , Oryza/metabolismo , Melhoramento Vegetal , Amido/metabolismo , Amilopectina/metabolismo , Amilose/metabolismo , Fatores de Transcrição/genética , Fatores de Transcrição/metabolismoRESUMO
N-doped carbon-based materials are crucial electrically conductive additives and non-metal electrocatalysts for the oxygen reduction reaction. At present, many pieces of research are focused on the effects of micropore, mesopore and hierarchical pore structure on the catalytic activity, however, there are few works concerning the role of large-dimension through-hole structure. Hence, in this work, we prepare two kinds of carbon materials with large through-hole structure, i.e. N-doped carbon hollow-spheres and hollow-tubes, as the oxygen reduction catalysts. The synthesis follows template-free morphology-controlled pyrolysis, which is more convenient than the preparation of conventional N-doped nanotubes and graphene. The resultant N-doped carbon hollow-spheres and hollow-tubes evidently enhanced their ORR catalytic activity, remarkable long-term stability and methanol resistance. The large-dimension through-hole structure is found to account for the increase in mass transfer.
RESUMO
The fascinating pulley effect from moveable α-cyclodextrin (α-CD) based polyrotaxane favors toughening of hydrogels, but the strategy is rarely applied in bulk polymers because of the severe aggregation trend of α-CDs. Herein, the authors propose a simple approach to moderately modify the α-CDs of polyrotaxane by introducing large steric side groups and reactive CC so as to minimize the unwanted hydrogen bonds-induced aggregation of α-CDs and hydrophilicity of polyrotaxane. Accordingly, the proof-of-concept material, poly(methyl acrylate) crosslinked by the modified polyrotaxane, turns out to be rather homogeneous with optical transparency. The polyrotaxane crosslinks are movable under external force as disclosed by in situ small-angle X-ray scattering and other techniques, which is correlated to the relative amount of α-CDs. A few polyrotaxane crosslinkers prove to be sufficient to simultaneously improve strength and toughness of poly(methyl acrylate) owing to the stress equalization. The present work provides an expandable toolbox for enhancing polymers.
Assuntos
Ciclodextrinas , Rotaxanos , Hidrogéis , Interações Hidrofóbicas e Hidrofílicas , Polietilenoglicóis , PolímerosRESUMO
A quadrupole electric field-mediated exfoliation method is proposed to convert micron-sized hexagonal boron nitride (h-BN) powder into few-layer hexagonal boron nitride nanosheets (h-BNNS). Under optimum conditions (400 Hz, 40 V, 32 µg ml-1, sodium deoxycholate, TAE medium), the h-BN powders (thickness >200 nm, horizontal scale â¼10 µm) are successfully exfoliated into 0.5-4 nm (1-10 layers) thick h-BNNS with the same horizontal scale. Dynamic laser scattering and atomic force microscope data show that the yield is 47.6% (for the portion with the thickness of 0.5-6 nm), and all of the vertical sizes are reduced to smaller than 18 nm (45 layers).
RESUMO
Development of bifunctional non-metal electrocatalyst for oxygen reduction reactions (ORRs) and oxygen evolution reactions (OERs) with high efficiency, durable stability and low cost is a crucial and challenging issue. However, the heteroatom-doped carbon material including a carbon-based conductive additive would be easily oxidized under the high potential needed for driving the OER. Besides, the interaction between the heteroatom-doped carbon material that possesses electrocatalyst activity and a carbon-based conductive additive is weak, affecting the performance of the electrocatalyst. In this context, we introduce CoS nanoparticles into a three-dimensional N-doped carbon framework (CoS/NCF) by a morphology-retaining pyrolysis of polyaniline/CoS framework precursor, in which the polyaniline framework provides abundant functional groups to nucleate and grow CoS nanoparticles while retaining its interconnected three-dimensional porous structure. Benefiting from (i) the lower OER potential of CoS nanoparticles than the electro-oxidation decomposition potential of a carbon material and (ii) the strong affinity of CoS nanoparticles for a N-doped carbon framework, higher stability than commercial Pt/C system and greater catalytic activity towards ORR with an onset potential of about 0.921 V versus reversible hydrogen electrode (RHE) are observed. Furthermore, only a potential of 1.515 V versus RHE is required for achieving a current density of 10 mA cm-2.
RESUMO
Development of two-way shape memory polymers that operate free of external force remains a great challenge. Here, the design criteria for this type of material are proposed, deriving a novel fabrication strategy accordingly, which employs conventional crosslinked polyurethane (PU) containing crystalline poly(ε-caprolactone) (PCL) as the proof-of-concept material. Having been simply trained by stretching and thermal treatment without additional ingredients and chemicals, the PU is coupled with a two-way shape memory effect. The core advancement of this study lies in the successful conversion of the inherent hydrogen bond network, which is often the easiest to overlook, into an internal stress provider. The temperature-dependent reversible melting/recrystallization of the crystalline phases elaborately works with the tensed hydrogen bond network, leading to implementation of the two-way shape memory effect. An average reversible strain of as high as ≈20% along the stretch direction is obtained through cooperation adjustment of chemical crosslinking density, crystallinity, and concentration of hydrogen bonds. Meanwhile, the highest internal tension offered by the hydrogen bond network is determined to be 0.10 MPa. Owing to the great convenience characterized by material selection, preparation, programming, and application, the current work may open up an avenue for production and usage of the smart material.
Assuntos
Materiais Biocompatíveis/química , Poliésteres/química , Polímeros/química , Poliuretanos/química , Materiais Biocompatíveis/síntese química , Cristalização , Ligação de Hidrogênio , Estrutura Molecular , Polímeros/síntese química , Espectroscopia de Infravermelho com Transformada de Fourier , TemperaturaRESUMO
The present communication reports a novel strategy to fabricate reversible shape-memory polymer that operates without the aid of external force on the basis of a two-phase structure design. The proof-of-concept material, crosslinked styrene-butadiene-styrene block copolymer (SBS, dispersed phase)/polycaprolactone-based polyurethane (PU, continuous phase) blend, possesses a closely connected microphase separation structure. That is, SBS phases are chemically bonded to crosslinked PU by means of a single crosslinking agent and two-step crosslinking process for increasing integrity of the system. Miscibility between components in the blend is no longer critical by taking advantage of the reactive blending technique. It is found that a suitable programming leads to compressed SBS, which serves as internal expansion stress provider as a result. The desired two-way shape-memory effect is realized by the joint action of the temperature-induced reversible opposite directional deformabilities of the crystalline phase of PU and compressed SBS, accompanying melting and orientated recrystallization of the former. Owing to the broadness of material selection and manufacturing convenience, the proposed approach opens an avenue toward mass production and application of the smart polymer.
Assuntos
Técnicas de Química Analítica , Polímeros/síntese química , Elastômeros , Fenômenos Mecânicos , Poliuretanos/química , Estirenos/química , TemperaturaRESUMO
PURPOSE: The current study was designed to investigate the primary efficacy of esophageal irradiation stents coated with 125I particles in the treatment of elderly patients with advanced esophageal cancer. METHODS: Forty-three elderly patients with advanced esophageal cancer were treated with esophageal stents in the First Affiliated Hospital of Xinxiang Medical University between September 2009 and December 2010. Patients were randomly divided into group A (N=18), treated with irradiation stents, and group B (N=25), treated with ordinary stents. There were no significant intergroup differences in age, lesion length, degree of stenosis, or cancer stage. The stent implantation success rate, relief of dysphagia and complication rate, and survival were assessed. RESULTS: The stent implantation success and short-term dysphagia relief rates were 100.0% in both groups. The mean survival time was 9.8 months and 4.8 months in groups A and B, respectively (p<0.01). However, no significant difference in pain (5/18) or esophageal restenosis (7/25) was found (both p>0.05). CONCLUSION: Dysphagia was relieved and survival was prolonged in advanced esophageal cancer cases treated with 125I particle-coated esophageal stents. This method may be superior to the traditional stents method.
Assuntos
Neoplasias Esofágicas/radioterapia , Radioisótopos do Iodo/uso terapêutico , Stents , Idoso , Idoso de 80 Anos ou mais , Transtornos de Deglutição/terapia , Neoplasias Esofágicas/mortalidade , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Stents/efeitos adversosRESUMO
We greatly appreciate Tomba's valuable comments on our paper appearing in Soft Matter (2012, 8, 4780). Our responses are listed below to provide additional information for academic discussion.
RESUMO
A simple, effective and green bottom-up method for the synthesis of highly fluorescent N doped graphene oxide quantum dots (GOQDs) and polymer-like quantum dots (PQDs) was developed on the basis of rapid one-step microwave assisted pyrolysis of citric acid (CA) and diethylenetriamine (DETA) in different reaction solvents. Both one-photon-induced and two-photon-induced photoluminescence (PL) properties of the resultant GOQDs and PQDs were characterized and analyzed. The one-photon-induced PL quantum yields (QY) of GOQDs and PQDs reached 39.8 and 74.0%, respectively, which are high enough to exhibit strong photoluminescence (PL) emission even under daylight excitation. The origin of the PL behavior and PL quenching mechanism was explored in terms of the interaction between the functional groups on the surfaces of GOQDs or PQDs and Hg(2+). Furthermore, due to the excellent selectivity and sensitivity of the GOQDs and PQDs to Hg(2+), the quantum dots might be used for quantitative detection of Hg(2+) in aqueous solution.
RESUMO
The present communication reports a concept battery made by direct contact of magnesium foil with ultralight polyaniline (PANI) foam in the absence of additional electrolyte. Electrical current is allowed to be steadily released from the junction with a specific energy of 646â mWh g(-1) and specific capacity of 1247â mAh g(-1). Additionally, the battery offers an environmentally friendly route of hydrogen production along with discharging. Mechanistic studies indicated that the ubiquitous galvanic corrosion combined with decomposition of adsorbed trace water in the semi-conducting polymer foam enabled the generation of electricity, which overturns the traditional view. The higher moisture level is conducive to the discharge. This work is believed to open up new possibilities for the design of electrochemical batteries.
RESUMO
A water-processable blue fluorescent silver nanoparticle@graphene-polymer composite (Ag@G-pNIPAM) consisting of graphene coated with a thermally responsive poly-(N-isopropylacrylamide) (pNIPAM) shell is prepared. The pNIPAM shell swells or collapses as a function of temperature, serving as a means to trap silver nanoparticles in solution and get them sufficiently close to the graphene core to provide fluorescence enhancement based on the local surface plasmon resonance (LSPR) effect. The unique thermoresponsive properties and high enhancement ratio of the material should find application in solution fluorescence enhancers and a variety of biomedical applications, such as cellular uptake, sensing and imaging.
RESUMO
By using epoxy silane as a modifier and stabilizer, ZnO quantum dots (QDs) were synthesized by a one-step precipitation approach. The ZnO QDs acquired showed satisfactory redispersibility and exhibited strong and stable photoluminescence in both solution and dry states. When the ZnO QDs content was as high as 8 wt%, the ZnO QDs-epoxy nanocomposite was still highly transparent and luminescent. Accordingly, the ZnO QDs can be used as a luminescent material, and a cool white light emitting diode (WLED) lamp was made by encapsulating a UV chip with the nanocomposite, without traditional tricolor rare earth phosphors. Additionally, the high loading nanocomposite possessed high ultraviolet resistance, which would help to improve the lifetime of the WLED.
RESUMO
Imparting excellent electrical properties, mechanical robustness, suppleness, conduction stability during deformation, and self-healing to intrinsic conducting polymers is a challenging endeavor. The reversibly interlocked macromolecular networks (RILNs) approach is utilized to tackle this problem. Specifically, poly(3,4-ethylenedioxythiophene) (PEDOT) is mixed with flexible polysulfonic acid networks crosslinked by reversible Diels-Alder bonds, while rigid polyaniline networks crosslinked by reversible Schiff base bonds act as molecular staples. Owing to the joint actions of the doping effect of polyaniline on PEDOT, the specific interlocking architecture and synergy between the component materials, the electrical conductivity (59.3-980.5 S cm-1), tensile strength (8.4-81.6 MPa) and elongation at break (44.5-411.0%) of the resultant PEDOT/RILNs films is significantly tunable according to different usage scenarios by adjusting the PEDOT content from 1.48 to 22.24 wt%. More importantly, the electrical resistance of PEDOT/RILNs remains constant during not only a single large extension and deflection but also repeated stretching (up to 1500 cycles) and bending (up to 106 cycles). The built-in reversible covalent bonds enable the PEDOT/RILNs to autonomously restore damaged mechanical and electrical performance. These record-breaking results and the demonstration of self-powered sensor made of PEDOT/RILNs suggest that the proposed approach successfully satisfies various conflicting requirements of flexible electronics regarding the properties of conducting polymers.
RESUMO
Interconnecting macromolecules via multiple hydrogen bonds (H-bonds) can simultaneously strengthen and toughen polymers, but material synthesis becomes extremely difficult with increasing number of H-bonding donors and acceptors; therefore, most reports are limited to triple and quadruple H-bonds. Herein, this bottleneck is overcome by adopting a quartet-wise approach of constructing H-bonds instead of the traditional pairwise method. Thus, large multiple hydrogen bonds can be easily established, and the supramolecular interactions are further reinforced. Especially, when such multiple H-bond motifs are embedded in polymers, four macromolecular chains-rather than two as usual-are tied, distributing the applied stress over a larger volume and more significantly improving the overall mechanical properties. Proof-of-concept studies indicate that the proposed intermolecular multiple H-bonds (up to duodecuple) are readily introduced in polyurethane. A record-high tensile strength (105.2 MPa) is achieved alongside outstanding toughness (352.1 MJ m-3), fracture energy (480.7 kJ m-2), and fatigue threshold (2978.4 J m-2). Meantime, the polyurethane has acquired excellent self-healability and recyclability. This strategy is also applicable to nonpolar polymers, such as polydimethylsiloxane, whose strength (15.3 MPa) and toughness (50.3 MJ m-3) are among the highest reported to date for silicones. This new technique has good expandability and can be used to develop even more and stronger polymers.
RESUMO
Ceramic-polymer composite solid electrolytes (CSEs) have attracted great attention by combining the advantages of polymer electrolytes and inorganic ceramic electrolytes. Herein, Li10GeP2S12 (LGPS) particles are incorporated into poly(ethylene oxide) (PEO)-based reversibly interlocked polymer networks (RILNs) derived from the topological rearrangement of two PEO networks cross-linked by reversible imine bonds and disulfide linkages. A series of highly ionic conductive, self-healing CSEs are obtained accordingly. The interlocking architecture successfully inhibits PEO crystallization, increasing the amorphous phase for Li ion transportation, and stabilizes the conductive pathways of LGPS particles by its unique confinement effect. Meanwhile, the LGPS particles cooperate with the RILN matrix, forming a filler-polymer interfacial phase for additional Li ion transportation and strengthening and toughening the resultant CSEs via the strong intermolecular Li+-O2- interactions. Furthermore, the dynamic characteristics of the included reversible bonds ensure a multiple intrinsic self-healing capability. Consequently, the CSEs containing 15 wt % LGPS deliver a high ionic conductivity (1.06 × 10-3 S cm-1) and high Li ion transference number (â¼0.6) at 25 °C, a wide electrochemical stability window (>4.9 V), good mechanical properties (0.63 MPa, 377%), and a stable CSE/Li anode interface. The integrated Li/CSE/LiFePO4 battery exhibits a specific discharge capacity of 110.8 mAh g-1 at 1 C (25 °C) and a capacity retention of 76.9% after 200 cycles. Thanks to the healability, the damaged CSEs can regain the structural integrity, ion conductive capability, and cycling performance of the assembled cells. The present work provides an effective strategy to fabricate CSEs for lithium metal batteries that are workable at ambient temperature.
RESUMO
The development of photochemical self-healing polymers faces the the following bottlenecks: i) only the surface cracks can be restored and ii) materials' mechanical properties are lower. To break these bottlenecks, cross-linked poly(urethane-dithiocarbamate)s carrying photo-reversible dithiocarbamate bonds covalently linked to indole chromophores and benzyl groups are designed. The conjugated structure of the chromophore and benzyl enhances the addition reactivity of thiocarbonyl moiety and facilitates photo-cleavage of CS bond, so that transfer of the created radicals among dithiocarbamate linkages is promoted. Accordingly, reshuffling of the reversibly cross-linked networks via dynamic exchange between the activated dithiocarbamates is enabled in both surface layer and the interior upon exposure to the low-intensity ultraviolet (UV) light from the sun. It is found that the damages up to a centimeter below the surface can be effectively recovered in the sunshine, which greatly exceeds the maximum penetration distance of UV light (hundreds of microns). Besides, tensile strength and failure strain of the poly(urethane-dithiocarbamate) are superior to the reported photo-reversible polymers, achieving the record-high 33.8 MPa and 782.0% owing to the wide selectivity of soft/hard blocks, multiple interactions, and appropriate cross-linking architecture. The present work provides a novel paradigm of photo self-healing polymers capable of re-bonding cracks even out of the reach of the illumination.
RESUMO
Simultaneously gluing hydrophobic and hydrophilic materials is a highly desired but intractable task. Herein, we developed a facile strategy using reversibly interlocked macromolecular networks (ILNs) as an adhesive. As shown by the proof-of-concept assembly of glass/ILNs/fluoropolymer (i.e., a simplified version of a photovoltaic module), the sandwiched ILNs were stratified after hot-pressing owing to temporary decrosslinking enabled by the built-in reversible covalent bonds. The fragmented component networks were enriched near their respective thermodynamically favored substrates to form a Janus-like structure. Strong elaborate interfacial bespoke chemical bonds and mechanical interlocking were thus established accompanied by the reconstruction of ILNs after cooling, which cooperated with the robust cohesion of the core part of the ILNs resulting from topological entanglements and led to a record-high peeling strength of 64.86 N cm-1. Also, the ILN-based Janus-like adhesive possessed reversible recyclability, adhesivity and on-demand de-bondability. The molecular design detailed in this study serves as a guide for developing a high-performance smart adhesive that firmly bonds non-sticking materials. Compared with existing Janus adhesives, our ILNs-based adhesive not only shows extremely useful reversibility but also greatly simplifies the adhesion process with no surface treatment required.
RESUMO
In this paper, the effect of the internal micro-magnetic field (IMMF) on the photocurrent property of conjugated polymer/inorganic semiconductor nanocomposites is reported and analyzed. By using the redox reaction, magnetic Fe(3)O(4) nanoparticles were coated on the surface of highly active nanorods of conjugated polyaniline (PANI), forming an internal micro-magnetic electron donor (i.e., Fe(3)O(4)@PANI). After subsequent incorporation of CdS nanoparticles (serving as electron acceptors), the power conversion efficiency (PCE) of the system (Fe(3)O(4)@PANI-CdS) was found to be as high as 3.563%, contrasting sharply with the value (1.135%) of the hybrid without Fe(3)O(4) (PANI-CdS). This obvious enhancement originated from the fact that the IMMF increased the number of singlet polaron pairs through field-dependent intersystem crossing (ISC), giving a positive contribution to the photocurrent generation. Additionally, the dependence of the photocurrent on the remnant magnetization of the Fe(3)O(4)@PANI-CdS nanocomposites was investigated. A percolation behavior was observed, which was due to the appearance of interpenetrating networks consisting of donor and acceptor phases, leading to the recombination of charge carriers through trapping. The outcomes of the present work might help to produce a new family of conjugated organic/inorganic semiconductor nanocomposites with designed optoelectronic performances.
RESUMO
In order to investigate the steric effect of aromatic pendant groups and the electrical bistability in nonconjugated polymers potentially for memory device applications, two π-stacked polymers with different steric structures are synthesized and characterized. They exhibit two conductivity states and can be switched from an initial low-conductivity (OFF) state to a high-conductivity (ON) state. Additionally, they demonstrate nonvolatile write-once-read-many-times (WORM) memory behavior with an ON/OFF current ratio up to 10(4), and flash memory behavior with an ON/OFF current ratio of approximately 10(5). Both steady-state and time-resolved fluorescence spectroscopies are used to examine the conformational change of the polymers responding to an applied external electrical voltage. The results provide useful information on different steric effects of pendant groups in polymer chains, resulting in various electrical behaviors. The possibility in realizing an "erasable" behavior through breaking π-stacked structures of pendant groups by a reversal of the electric field was also discussed on the basis of temperature-dependent fluorescence spectroscopy investigation. These results may thus offer a guideline for the design of practical polymer memory devices via tuning steric structure of π-stacked polymers.