RESUMO
OBJECTIVE: To investigate the association of metals/metalloids exposure with risk of liver disfunction among occupational population in Hunan Province, and to explore the potential dose-response relationship. METHODS: In 2017, a mining area in Hunan Province was chosen as the research site, and eligible workers were recruited as study subjects. General demographic characteristics, levels of 23 metals/metalloids in plasma and urine, and liver function index(total bilirubin(TBIL), alanine amino transferase(ALT), globulin(GLB) and γ-glutamyl transferase(GGT)) were obtained by questionnaire, physical examination and laboratory tests. Participants were followed up in 2018, 2019 and 2020 respectively. Cox proportional risk model was used to evaluate the relationship between metal/metalloids exposure and risk of liver disfunction, and dose-response relationship curves were plotted by using the restricted cubic spline function. RESULTS: A total of 891 employees were recruited in the study, 576(65.0%)were aged ≤45 years, 832(93.4%) were male and 530(59.5%) worked as smelters. After adjusting various factors such as age, gender, BMI, type of work, education, smoking, alcohol consumption, diet, stress, medical history, exercise and tea consumption, positive correlations were found between plasma tungsten(HR=4.90, 95%CI 1.17-20.48) and urinary barium(HR=1.07, 95%CI 1.02-1.12) levels with abnormally elevated TBIL levels. Additionally, a significant association was observed between plasma thallium and the risk of elevated ALT levels(HR=11.15, 95%CI 1.97-63.29). CONCLUSION: Plasma tungsten and thallium, along with barium found in urine, are risk factors for the development of abnormally elevated liver function indices in occupational groups.
Assuntos
Hepatopatias , Metaloides , Humanos , Masculino , Feminino , Estudos Prospectivos , Tálio , Bário , Tungstênio , MetaisRESUMO
BACKGROUND: It is widely recognized that ambient air pollution can induce various detrimental health outcomes. However, evidence linking ambient air pollutants and hyperuricemia incidence is scarce. OBJECTIVES: To assess the association between long-term air pollution exposure and the risk of hyperuricemia. METHODS: In this study, a total of 5854 government employees without hyperuricemia were recruited and followed up from January 2018 to June 2021 in Hunan Province, China. Hyperuricemia was defined as serum uric acid (SUA) level of >420 µmol/L for men and >360 µmol/L for women or use of SUA-lowering medication or diagnosed as hyperuricemia during follow-up. Data from local air quality monitoring stations were used to calculate individual exposure levels of PM10, PM2.5, SO2 and NO2 by inverse distance weightingn (IDW) method. Cox proportional hazard model was applied to evaluate the causal relationships between air pollutant exposures and the risk of hyperuricemia occurrence after adjustment for potential confounders and meanwhile, restricted cubic spline was used to explore the dose-response relationships. RESULTS: The results indicated that exposures to PM10 (hazard ratio, HR = 1.042, 95% conficence interal, 95% CI: 1.028, 1.057), PM2.5 (HR = 1.204, 95% CI: 1.141, 1.271) and NO2 (HR = 1.178, 95% CI: 1.125,1.233) were associated with an increased HR of hyperuricemia. In addition, a nonlinear dose-response relationship was found between PM10 exposure level and the HR of hyperuricemia (p for nonlinearity = 0.158) with a potential threshold of 50.11 µg/m3. Subgroup analysis demonstrated that participants usually waking up at night and using natural ventilation were more vulnerable to the exposures of PM10, PM2.5, NO2, and SO2. CONCLUSION: Long-term exposures to ambient PM10, PM2.5 and NO2 are associated with an increased incidence of hyperuricemia among Chinese government employees.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , Poluentes Ambientais , Hiperuricemia , Masculino , Humanos , Feminino , Poluentes Atmosféricos/toxicidade , Poluentes Atmosféricos/análise , Estudos Longitudinais , Poluentes Ambientais/análise , Dióxido de Nitrogênio/análise , Incidência , Empregados do Governo , Hiperuricemia/induzido quimicamente , Hiperuricemia/epidemiologia , Ácido Úrico/análise , Exposição Ambiental/análise , Estudos de Coortes , Poluição do Ar/efeitos adversos , Poluição do Ar/análise , Material Particulado/toxicidade , Material Particulado/análise , China/epidemiologiaRESUMO
OBJECTIVE: To investigate the association between levels of twenty-three plasma metals/metalloids and the risk of arrhythmia among occupational population. METHODS: In 2017, a total of 765 workers aged 18 and above were recruited from a non-ferrous metal factory. The general demographic characteristics were obtained by using questionnaire. Plasma metal/metalloid levels were determined by inductively coupled plasma mass spectrometry(ICP-MS). Participants were followed up in 2018, 2019 and 2020 respectively. After the elements that may affect the incidence of arrhythmia were screened out by least absolute shrinkage and selection operator(LASSO) regression, Cox regression model was used to analyze the relationship between levels of selected elements and risk of arrhythmia occurrence, Quantile g-computation model was used to analyze the effect of element mixture exposure on arrhythmia, and the dose-response curve was estimated by using restricted cubic spline(RCS) function. RESULTS: Of all the research subjects, 386(50.5%) were ≤45 years old; 401(52.4%) had 20 years or more of work experience; 712(93.1%) subjects were male workers. The incidence of arrhythmia was 17.6%. After adjusting for age, seniority, gender, body mass index(BMI), marital status, education level, smoking, drinking, drinking tea, regular exercise, chronic diseases(hypertension, hyperlipidemia), sleep quality and psychological stress, chromium, molybdenum and antimony increased the risk of arrhythmia with HR(95%CI) values of 1.22(1.11-1.34), 1.51(1.20-1.90) and 2.38(1.03-5.49), respectively, while barium reduced the risk of arrhythmia with HR(95%CI) value of 0.98(0.95-1.00). CONCLUSION: Chromium, molybdenum and antimony are the risk factors while barium is the protective factor for arrhythmia.
Assuntos
Metaloides , Molibdênio , Masculino , Humanos , Pessoa de Meia-Idade , Feminino , Estudos Prospectivos , Antimônio , Bário , Metais , CromoRESUMO
BACKGROUND: Newborn hearing screening results indicated that more than 40% of the detected infants had no recognized risk factors. To determine whether maternal exposure to ambient air pollutants and experience of stressful life event, as well as lack of fresh fruit and vegetable during pregnancy are associated with the abnormal hearing development among newborns. METHODS: A total of 1193 newborns and their mothers were recruited in this study. Personal information and covariates were collected by face to face interview. Medical examination results of newborns and their mothers were extracted from medical record. We estimated personal air pollutant exposure level through inverse distance weighted method based on data from air quality monitoring stations and assessed the auditory development of newborns via distortion product otoacoustic emission (DPOAE). Unconditional logistic regression model was used to estimate the relationship between DPOAE screening result and the potential influential factors as well as the combined effect. RESULTS: The results indicated that PM10 exposure during the second trimester and stressful life event during the third trimester could increase the risk of not passing DPOAE test among newborns. However, frequent intakes of fruit and vegetable significantly reduced the risk. There was a synergetic interaction between PM10 exposure and stressful life event on neonatal hearing development. CONCLUSIONS: To alleviate abnormal auditory development among fetus, pregnant woman should decrease the exposures to ambient air pollutant and negative life event and at the same time, intake sufficient fresh fruit and vegetable.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , Poluentes Atmosféricos/efeitos adversos , Poluição do Ar/efeitos adversos , Feminino , Frutas , Humanos , Lactente , Recém-Nascido , Exposição Materna/efeitos adversos , Emissões Otoacústicas Espontâneas , Material Particulado/efeitos adversos , Gravidez , Estresse Psicológico , VerdurasRESUMO
Intake excessive arsenic (As) is related to the occurrence of peripheral neuropathy. However, both the underlying mechanism and the preventive approach remain largely unknown. In the present study, As treatment significantly decreased the mechanical withdrawal threshold and increased the titer of anti-myelin basic protein antibody in rats, accompanied with damaged BNB. The levels of inflammatory cytokines and proteolytic enzymes were also significantly upregulated. However, administration of MeCbl in As-treated rats significantly reversed the decline in hindfoot mechanical withdrawal threshold, as well as BNB failure and sciatic nerve inflammation. Repeated As treatment in athymic nude mice indicated that sciatic nerve inflammation and mechanical hyperalgesia were T cell-dependent. These data implicated that MBP-activated autoimmunity and the related neuroinflammation probably contributed to As-induced mechanical hyperalgesia and MeCbl exerted a protective role probably via maintenance the integrity of BNB and inhibition of neuroinflammation.
Assuntos
Arsênio , Doenças do Sistema Nervoso Periférico , Animais , Arsênio/toxicidade , Autoimunidade , Camundongos , Camundongos Nus , Doenças do Sistema Nervoso Periférico/induzido quimicamente , Doenças do Sistema Nervoso Periférico/prevenção & controle , Ratos , Nervo Isquiático , Vitamina B 12/análogos & derivadosRESUMO
Fourier ptychographic microscopy (FPM), simply replacing the traditional light source of a microscope with a LED array, can obtain high resolution and large field of view images simultaneously. A symmetrical LED illumination FPM is presented to improve the quality of high resolution images for defocus or thick samples in this paper. It is proven theoretically that symmetrical LED illumination had higher defocus tolerance than that of single LED illumination at first. Then, it is confirmed that symmetrical LED illumination FPM has better low-resolution images and reconstruction effect for defocus samples than that of single LED illumination by simulated and experimental results. Compared with the single illumination FPM, it is demonstrated that the depth of field of symmetrical FPM is more than doubled.
RESUMO
An approach to characterize laser-induced bulk damage in optical crystal materials was demonstrated. With a homemade swept-source optical coherence tomography (SS-OCT) system, we obtained three-dimensional images of the bulk damage produced by laser pulses with wavelength of 351 nm, pulse width of 5 ns, beam diameter of 5.5 mm and fluences from 4.56 J/cm2 to 9.95 J/cm2 in Potassium Dihydrogen Phosphate (KDP) crystal. Algorithms based on three-dimensional OCT images were specially designed to count and locate bulk damage pinpoints in KDP crystal, obtaining their equivalent diameter distribution and pinpoint density caused by different fluences. It is demonstrated that the characteristics of bulk damage detected by SS-OCT are similar to those obtained by available approaches. The rapid three-dimensional imaging by SS-OCT provides a new approach of detecting laser-induced bulk damage.
RESUMO
The purpose of this experiment was to investigate the differences in rumen tissue morphology, volatile fatty acid content, and rumen microflora between Tianhua mutton sheep and Gansu alpine fine wool sheep under the same grazing conditions. Twelve 30-day-old lambs were randomly selected from two different flocks in Duolong Village and grazed together for a period of 150 days. The rumen tissue was fixed with 4% paraformaldehyde and brought back to the laboratory for H&E staining, the volatile fatty acid content of the rumen contents was detected by gas chromatography, and the rumen flora structure was sequenced by full-length sequencing of the bacterial 16S rRNA gene using the PacBio sequencing platform. The acetic acid and total acid contents of the rumen contents of Tianhua mutton sheep were significantly higher than those of Gansu alpine fine wool sheep (p < 0.05). The rumen papillae height of Tianhua mutton sheep was significantly higher than that of Gansu alpine fine wool sheep (p < 0.05). The diversity and richness of the rumen flora of Tianhua mutton sheep were higher than those of Gansu alpine fine wool sheep, and Beta analysis showed that the microflora structure of the two fine wool sheep was significantly different. At the phylum level, Firmicutes and Bacteroidetes dominated the rumen flora of Tianhua mutton sheep and Gansu alpine fine wool sheep. At the genus level, the dominant strains were Christensenellaceae_R_7_group and Rikenellaceae_RC9_gut_group. LEfSe analysis showed that Prevotella was a highly abundant differential species in Tianhua mutton sheep and lachnospiraccac was a highly abundant differential species in Gansu alpine fine wool sheep. Finally, both the KEGG and COG databases showed that the enrichment of biometabolic pathways, such as replication and repair and translation, were significantly higher in Tianhua mutton sheep than in Gansu alpine fine wool sheep (p < 0.05). In general, there were some similarities between Tianhua mutton sheep and Gansu alpine fine wool sheep in the rumen tissue morphology, rumen fermentation ability, and rumen flora structure. However, Tianhua mutton sheep had a better performance in the rumen acetic acid content, rumen papillae height, and beneficial bacteria content. These differences may be one of the reasons why Tianhua mutton sheep are more suitable for growing in alpine pastoral areas than Gansu alpine fine wool sheep.
RESUMO
Wastewater-based epidemiology (WBE) has gained increasing attention as a complementary tool to conventional surveillance methods with potential for significant resource and labour savings when used for public health monitoring. Using WBE datasets to train machine learning algorithms and develop predictive models may also facilitate early warnings for the spread of outbreaks. The challenges associated with using machine learning for the analysis of WBE datasets and timeseries forecasting of COVID-19 were explored by running Random Forest (RF) algorithms on WBE datasets across 108 sites in five regions: Scotland, Catalonia, Ohio, the Netherlands, and Switzerland. This method uses measurements of SARS-CoV-2 RNA fragment concentration in samples taken at the inlets of wastewater treatment plants, providing insight into the prevalence of infection in upstream wastewater catchment populations. RF's forecasting performance at each site was quantitatively evaluated by determining mean absolute percentage error (MAPE) values, which was used to highlight challenges affecting future implementations of RF for WBE forecasting efforts. Performance was generally poor using WBE datasets from Catalonia, Scotland, and Ohio with 'reasonable' or better forecasts constituting 0 %, 5 %, and 0 % of these regions' forecasts, respectively. RF's performance was much stronger with WBE data from the Netherlands and Switzerland, which provided 55 % and 45 % 'reasonable' or better forecasts respectively. Sampling frequency and training set size were identified as key factors contributing to accuracy, while inclusion of too many unnecessary variables (or e.g., flow data) was identified as a contributing factor to poor performance. The contribution of catchment population on forecast accuracy was more ambiguous. This study determined that the factors governing RF's forecast performance are complicated and interrelated, which presents challenges for further work in this space. A sufficiently accurate further iteration of the tool discussed within this study would provide significant but varying value for public health departments for monitoring future, or ongoing outbreaks, assisting the implementation of on-time health response measures.
Assuntos
COVID-19 , Vigilância Epidemiológica Baseada em Águas Residuárias , Humanos , Águas Residuárias , COVID-19/epidemiologia , Fatores de Tempo , RNA Viral , SARS-CoV-2 , Aprendizado de Máquina , PrevisõesRESUMO
BACKGROUND: A growing number of researches indicated the association between plasma trace elements and blood lipids. However, the potential interaction and dose-response relationship were less frequently reported. METHODS: In this study, a total of 3548 participants were recruited from four counties in Hunan Province, South China. Demographic characteristics were collected by face-to-face interviews and inductively coupled plasma mass spectrometry (ICPMS) was used to determine the levels of 23 trace elements in plasma. We applied a fully adjusted generalized linear regression model (GLM) and a multivariate restricted cubic spline (RCS) to estimate the correlation, dose-response relationship and possible interaction between 23 trace elements and four blood lipid markers. RESULTS: The results indicated positive dose-response relationships of plasma 66zinc with triglycerides (TG) and low density lipoprotein cholesterol (LDL-C), plasma 78selenium with LDL-C and total cholesterol (TCH), and plasma 59cobalt with high-density lipoprotein cholesterol (HDL-C). There was a negative dose-response relationship between 59cobalt and LDL-C. Further analysis found that 66zinc and 59cobalt had an antagonistic effect on the risk of increased LDL-C level. CONCLUSIONS: This study added new evidence for the potential adverse effects of 66Zn and 78Se on blood lipids, and provided new insight into the threshold value setting for metals as well as the intervention strategy for dyslipidemia.
Assuntos
Oligoelementos , Humanos , Estudos Transversais , LDL-Colesterol , Lipídeos , Triglicerídeos , HDL-Colesterol , Zinco , Cobalto , ChinaRESUMO
At present, there is an increasing need to mimic the in vivo micro-environment in the culture of cells and tissues in micro-tissue engineering. Concave microwells are becoming increasingly popular since they can provide a micro-environment that is closer to the in vivo environment compared to traditional microwells, which can facilitate the culture of cells and tissues. Here, we will summarize the fabrication methods of concave microwells, as well as their applications in micro-tissue engineering. The fabrication methods of concave microwells include traditional methods, such as lithography and etching, thermal reflow of photoresist, laser ablation, precision-computerized numerical control (CNC) milling, and emerging technologies, such as surface tension methods, the deformation of soft membranes, 3D printing, the molding of microbeads, air bubbles, and frozen droplets. The fabrication of concave microwells is transferring from professional microfabrication labs to common biochemical labs to facilitate their applications and provide convenience for users. Concave microwells have mostly been used in organ-on-a-chip models, including the formation and culture of 3D cell aggregates (spheroids, organoids, and embryoids). Researchers have also used microwells to study the influence of substrate topology on cellular behaviors. We will briefly review their applications in different aspects of micro-tissue engineering and discuss the further applications of concave microwells. We believe that building multiorgan-on-a-chip by 3D cell aggregates of different cell lines will be a popular application of concave microwells, while integrating physiologically relevant molecular analyses with the 3D culture platform will be another popular application in the near future. Furthermore, 3D cell aggregates from these biosystems will find more applications in drug screening and xenogeneic implantation.
RESUMO
Terahertz (THz) wave-based imaging of biological samples is an emerging but promising field. In the present work, we report an artificial phenomenon observed in imaging melanoma slices, which can lead to mistakenly interpretation of the experimental results. It was observed that a structure similar to but smaller than the sample contour appeared inside the melanoma slice image. The underlying mechanism of this phenomenon was then investigated both experimentally and theoretically. By imaging a regular standard sample (vinyl coverslip) with a THz time domain spectroscopy (THz-TDS) system and reconstructing its images at 0.8 and 1.2 THz, we can clearly observe the afore-mentioned artifacts. The experimental results are highly consistent with the simulations based on the Fresnel-Kirchhoff diffraction theory in which possible optical aberrations were incorporated. It can be concluded that this artifact was caused by the frequency-dependent diffraction of the sample edge. The work demonstrated here is essential for correct interpretation of the images obtained by the THz-TDS technique.
RESUMO
Zebrafish are an important animal model, whose structure and function information can be used to study development, pathologic changes and genetic mutations. However, limited by the penetration depth, the available optical methods are difficult to image the whole-body zebrafish in juvenile and adult stages. Based on a home-made high-resolution polarization-sensitive optical coherence tomography (PS-OCT) system, we finished in vivo volumetric imaging for zebrafish, and various muscles can be clearly discerned by scanning from dorsal, ventral, and lateral directions. Besides structure information, polarization properties extracted from PS-OCT images provide abundant function information to distinguish different muscles. Furthermore, we found local retardation and local optic axis of zebrafish muscle are related to their composition and fiber orientation. We think high-resolution PS-OCT will be a promising tool in studying myopathy models of zebrafish.
RESUMO
Many natural and man-made objects consist of simple primitives, similar components, and various symmetry structures. This paper presents a divide-and-conquer quadrangulation approach that exploits such global structural information. Given a model represented in triangular mesh, we first segment it into a set of submeshes, and compare them with some predefined quad mesh templates. For the submeshes that are similar to a predefined template, we remesh them as the template up to a number of subdivisions. For the others, we adopt the wave-based quadrangulation technique to remesh them with extensions to preserve symmetric structure and generate compatible quad mesh boundary. To ensure that the individually remeshed submeshes can be seamlessly stitched together, we formulate a mixed-integer optimization problem and design a heuristic solver to optimize the subdivision numbers and the size fields on the submesh boundaries. With this divider-and-conquer quadrangulation framework, we are able to process very large models that are very difficult for the previous techniques. Since the submeshes can be remeshed individually in any order, the remeshing procedure can run in parallel. Experimental results showed that the proposed method can preserve the high-level structures, and process large complex surfaces robustly and efficiently.