Fabrication of an Ultrastrong Formaldehyde-Free Wood Adhesive with an Organic-Inorganic Cross-Linking Network.

The wood industry faces challenges in producing eco-friendly, high-performance, and formaldehyde-free adhesives. In this study, carboxylated styrene-butadiene rubber (XSBR) was blended with polyamidoamine-epichlorohydrin (PAE) resin, and a controlled amount of CaCO3 powder was incorporated to create an adhesive with exceptional strength. The resulting three-layer plywood demonstrated remarkable dry and wet shear strengths of 3.09 and 2.36 MPa, respectively, and of 2.27 MPa after boiling water tests, comparable to that of phenolic resins. Additionally, the adhesive exhibited strong adhesion across various materials including glass, metal, etc. This exceptional performance was due to two primary factors: (1) the high-density chemical cross-linking reaction and the physical entanglement between XSBR and PAE; (2) the organic-inorganic hybrid involving metal ion complexation developed by CaCO3, which fostered molecular chain connections and enhanced the adhesive-material interface. These findings offer valuable references for further research in the field of wood adhesives.

Enhanced VEGF secretion and blood-brain barrier disruption: Radiation-mediated inhibition of astrocyte autophagy via PI3K-AKT pathway activation.

Radiation-induced damage to the blood-brain barrier (BBB) is the recognized pathological basis of radiation-induced brain injury (RBI), a side effect of head and neck cancer treatments. There is currently a lack of therapeutic approaches for RBI due to the ambiguity of its underlying mechanisms. Therefore, it is essential to identify these mechanisms in order to prevent RBI or provide early interventions. One crucial factor contributing to BBB disruption is the radiation-induced activation of astrocytes and oversecretion of vascular endothelial growth factor (VEGF). Mechanistically, the PI3K-AKT pathway can inhibit cellular autophagy, leading to pathological cell aggregation. Moreover, it acts as an upstream pathway of VEGF. In this study, we observed the upregulation of the PI3K-AKT pathway in irradiated cultured astrocytes through bioinformatics analysis, we then validated these findings in animal brains and in vitro astrocytes following radiation exposure. Additionally, we also found the inhibition of autophagy and the oversecretion of VEGF in irradiated astrocytes. By inhibiting the PI3K-AKT pathway or promoting cellular autophagy, we observed a significant amelioration of the inhibitory effect on autophagy, leading to reductions in VEGF oversecretion and BBB disruption. In conclusion, our study suggests that radiation can inhibit autophagy and promote VEGF oversecretion by upregulating the PI3K-AKT pathway in astrocytes. Blocking the PI3K pathway can alleviate both of these effects, thereby mitigating damage to the BBB in patients undergoing radiation treatment.

Deep ultraviolet AlGaN-multiple quantum wells with photoluminescence enhanced by topological corner state.

The AlGaN-based deep ultraviolet light-emitting diode (DUV LED) has advantages of environmentally friendly materials, tunable emission wavelength, and easy miniaturization. However, an increase in Al composition leads to a decline in the lattice quality, thereby reducing the internal quantum efficiency (IQE). In addition, the light extraction efficiency (LEE) is limited due to the strong transverse magnetization polarization emission from the multiple quantum wells. Here, we designed the topological corner structure in AlGaN-MQWs, and the high electric field intensity in a tiny space at the corner results in an extremely high local density of optical states (LDOS), which could shorten the luminescence decay time of the emitter and increase the radiative rate by 26 times. Meanwhile, because the excited topological corner state resonance mode is a transverse-electric mode, enhancing only the transverse-electric luminescence without any gain for transverse-magnetic luminescence, thereby significantly improving the light extraction efficiency. Finally, according to theoretical calculations, the IQE could reach 68.75% at room temperature.

Clinical outcomes of laparoscopic-assisted natural orifice specimen extraction colectomy using a Cai tube for left-sided colon cancer: a prospective randomized trial.

BACKGROUND: The role of laparoscopic-assisted natural orifice specimen extraction (LA-NOSE) colectomy in the treatment of left-sided colon cancer has not been well defined, and there remains confusion about how to conveniently exteriorize specimens through natural orifices. Therefore, we introduced a homemade invention, the Cai tube, to facilitate the extraction of specimens and compared the clinical outcomes of LA-NOSE with conventional laparoscopic (CL) colectomy for left-sided colon cancer. METHODS: From March 2015 to August 2017, patients with left-sided colon cancer were randomly divided into LA-NOSE and CL groups. Specimens were extracted through the anus with the help of a Cai tube (Patent Number: ZL201410168748.2) in the LA-NOSE group. The primary outcome measure was postoperative pain. Secondary outcomes were the duration of operation, postoperative recovery, surgical morbidity, pathological quality of the specimen, and long-term outcomes, including 3-year overall survival, disease-free survival, local recurrence, and overall recurrence. RESULTS: A total of 60 patients (30 per group) were recruited for this study. None of the patients required emergency conversion to conventional laparoscopic or open surgery during the operation. The postoperative maximum pain score was significantly lower in the LA-NOSE group (mean 2.5 vs. 5.1, P = 0.001), as was the additional analgesia requirement (mean 2/30 vs. 10/30, P = 0.021). Patients in the LA-NOSE group experienced a shorter first time to passage of flatus (mean 2.2 vs. 3.1 days, P = 0.026). All patients could control their defecation at 6 months after surgery. The comparison between the two groups showed no significant differences in the operative time, bleeding volume, postoperative hospital stay, surgical morbidity rates, number of lymph nodes harvested, or resection margin status. The mean follow-up was 48 months (range 7-59) and was similar in both groups. The results showed no differences in long-term outcomes between the two groups. CONCLUSION: In the treatment of left-sided colon cancer, compared with conventional laparoscopic colectomy, LA-NOSE colectomy using the Cai tube exhibited lower postoperative pain, shorter recovery of gastrointestinal function, and similar long-term outcomes. REGISTRATION NUMBER: ChiCTR-OOR-15007060 ( http://www.chictr.org.cn/ ).

Design and Properties of Natural Rosin-Based Phosphoester Functional Surfactants.

As an important forestry biomass resource, rosin has a wide range of applications in medicine, adhesives, surfactants and other fields. Using natural dehydroabietic acid as a raw material, dehydroabietic acid-based phosphorus monoester (DPM) and diester (DPD) surfactants were designed and synthesized. The chemical structures and self-assembly properties were characterized by FT-IR, NMR and TEM, and the effects of pH on critical micelle concentration, γCMC, emulsifying properties, foam properties and micelle morphology were studied. The results showed that the CMC, γCMC value and aggregate morphology had certain pH responsiveness. The γCMC value under acidic conditions was smaller than γCMC under alkaline conditions, and the foaming performance and foam stability under acidic conditions were better than those under alkaline conditions. TEM micelle morphology studies have shown that DPM and DPD surfactants can self-assemble into rod-shaped and spherical micelle morphologies with a pH change in an aqueous solution. At the same pH, the foaming and emulsification properties of DPD were better than those of DPM. The best foaming and emulsification ability of DPD were 11.8 mL and 175 s, respectively. At the same time, the foaming ability of DPD is also affected by pH. DPD has excellent foaming properties in acidic conditions, but these disappeared in neutral conditions.

What Is the Maximum Tibial Tunnel Angle for Transtibial PCL Reconstruction? A Comparison Based on Virtual Radiographs, CT Images, and 3D Knee Models.

BACKGROUND: To minimize the killer turn caused by the sharp margin of the tibial tunnel exit in transtibial PCL reconstruction, surgeons tend to maximize the angle of the tibial tunnel in relation to the tibial plateau. However, to date, no consensus has been reached regarding the maximum angle for the PCL tibial tunnel. QUESTIONS/PURPOSES: In this study we sought (1) to determine the maximum tibial tunnel angle for the anteromedial and anterolateral approaches in transtibial PCL reconstruction; (2) to compare the differences in the maximum angle based on three measurement methods: virtual radiographs, CT images, and three-dimensional (3D) knee models; and (3) to conduct a correlation analysis to determine whether patient anthropomorphic factors (age, sex, height, and BMI) are associated with the maximum tibial tunnel angle. METHODS: Between January 2018 and December 2020, 625 patients who underwent CT scanning for knee injuries were retrospectively reviewed in our institution. Inclusion criteria were patients 18 to 60 years of age with a Kellgren-Lawrence grade of knee osteoarthritis less than 1 and CT images that clearly showed the PCL tibial attachment. Exclusion criteria were patients with a history of tibial plateau fracture, PCL injuries, tumor, and deformity around the knee. Finally, 104 patients (43 males and 61 females, median age: 38 [range 24 to 56] years, height: 165 ± 9 cm, median BMI: 23 kg/cm2 [range 17 to 31]) were included for analysis. CT data were used to create virtual 3D knee models, and virtual true lateral knee radiographs were obtained by rotating the 3D knee models. Virtual 3D knee models were used as an in vitro standard method to assess the true maximum tibial tunnel angle of anteromedial and anterolateral approaches in transtibial PCL reconstruction. The tibial tunnel's entry was placed 1.5 cm anteromedial and anterolateral to the tibial tubercle for the two approaches. To obtain the maximum angle, a 10-mm- diameter tibial tunnel was simulated by making the tibial tunnel near the posterior tibial cortex. The maximum tibial tunnel angle, tibial tunnel lengths, and perpendicular distances of the tunnel's entry point to the tibial plateau were measured on virtual radiographs, CT images, and virtual 3D knee models. One-way ANOVA was used to compare the differences in the maximum angle among groups, and correlation analysis was performed to identify the relationship of the maximum angle and anthropomorphic factors (age, sex, height, and BMI). RESULTS: The maximum angle of the PCL tibial tunnel relative to the tibial plateau was greater in the anteromedial group than the anterolateral group (58° ± 8° versus 50° ± 8°, mean difference 8° [95% CI 6° to 10°]; p < 0.001). The maximum angle of the PCL tibial tunnel was greater in the virtual radiograph group than the CT image (68° ± 6° versus 49° ± 5°, mean difference 19° [95% CI 17° to 21°]; p < 0.001), the anteromedial approach (68° ± 6° versus 58° ± 8°, mean difference 10° [95% CI 8° to 12°]; p < 0.001), and the anterolateral approach (68° ± 6° versus 50° ± 8°, mean difference 18° [95% CI 16° to 20°]; p < 0.001), but no difference was found between the CT image and the anterolateral groups (49° ± 5° versus 50° ± 8°, mean difference -1° [95% CI -4° to 1°]; p = 0.79). We found no patient anthropomorphic characteristics (age, sex, height, and BMI) that were associated with the maximum angle. CONCLUSION: Surgeons should note that the mean maximum angle of the tibial tunnel relative to the tibial plateau was greater in the anteromedial than anterolateral approach in PCL reconstruction, and the maximum angle might be overestimated on virtual radiographs and underestimated on CT images. CLINICAL RELEVANCE: To perform PCL reconstruction more safely, the findings of this study suggest that the PCL drill system should be set differently for the anteromedial and anterolateral approaches, and the maximum angle measured by intraoperative fluoroscopy should be reduced 10° for the anteromedial approach and 18° for the anterolateral approach. Future clinical or cadaveric studies are needed to validate our findings.

Ultraviolet Response in Coplanar Silicon Avalanche Photodiodes with CMOS Compatibility.

Highly sensitive ultraviolet (UV) photodetectors are highly desired for industrial and scientific applications. However, the responsivity of silicon photodiodes in the UV wavelength band is relatively low due to high-density Si/SiO2 interface states. In this paper, a coplanar avalanche photodiode (APD) was developed with a virtual guard ring design. When working in Geiger mode, it exhibited a strong UV response. The responsivity of 4 × 103 A/W (corresponding to a gain of 8 × 106) at 261 nm is measured under the incident power of 0.6 µW with an excess bias of 1.5 V. To the best of our knowledge, the maximum 3-dB bandwidth of 1.4 GHz is the first report ever for a Si APD when working in the Geiger mode in spite of the absence of an integrated CMOS read-out circuit.

Whether sutures reduce the graft laceration caused by interference screw in anterior cruciate ligament reconstruction? A biomechanical study in vitro.

BACKGROUND: Interference screw is commonly used for graft fixation in anterior cruciate ligament (ACL) reconstruction. However, previous studies had reported that the insertion of interference screws significantly caused graft laceration. The purposes of this study were to (1) quantitatively evaluate the graft laceration from one single insertion of PEEK interference screws; and (2) determine whether different types of sutures reduced the graft laceration after one single insertion of interference screws in ACL reconstruction. METHODS: The in-vitro ACL reconstruction model was created using porcine tibias and bovine extensor digitorum tendons of bovine hind limbs. The ends of grafts were sutured using three different sutures, including the bioabsorbable, Ethibond and ultra-high molecular weight polyethylene (UHMWPE) sutures. Poly-ether-ether-ketone (PEEK) interference screws were used for tibial fixation. This study was divided into five groups (n = 10 in each group): the non-fixed group, the non-sutured group, the absorbable suture group, the Ethibond suture group and the UHMWPE suture group. Biomechanical tests were performed using the mode of pull-to-failure loading tests at 10 mm/min. Tensile stiffness (newtons per millimeter), energy absorbed to failure (in joules) and ultimate load (newtons) were recorded for analysis. RESULTS: All prepared tendons and bone specimens showed similar characteristics (length, weight, and pre-tension of the tendons, tibial bone mineral density) among all groups (P > 0.05). The biomechanical tests demonstrated that PEEK interference screws significantly caused the graft laceration (P < 0.05). However, all sutures (the bioabsorbable, Ethibond and UHMWPE sutures) did not reduce the graft laceration in ACL reconstruction (P > 0.05). CONCLUSIONS: Our biomechanical study suggested that the ultimate failure load of grafts was reduced of approximately 25 % after one single insertion of a PEEK interference screw in ACL reconstruction. Suturing the ends of the grafts using different sutures (absorbable, Ethibond and UHMWPE sutures) did not decrease the graft laceration caused by interference screws.

An Onboard Vision-Based System for Autonomous Landing of a Low-Cost Quadrotor on a Novel Landing Pad.

In this paper, an onboard vision-based system for the autonomous landing of a low-cost quadrotor is presented. A novel landing pad with different optical markers sizes is carefully designed to be robustly recognized at different distances. To provide reliable pose information in a GPS (Global Positioning System)-denied environment, a vision algorithm for real-time landing pad recognition and pose estimation is implemented. The dynamic model of the quadrotor is established and a system scheme for autonomous landing control is presented. A series of autonomous flights have been successfully performed, and a video of the experiment is available online. The efficiency and accuracy of the presented vision-based system is demonstrated by using its position and attitude estimates as control inputs for the autonomous landing of a self-customized quadrotor.

Identification of Three Dalbergia Species Based on Differences in Extractive Components.

Dalbergia cultrate, Dalbergia latifolia, and Dalbergia melanoxylon are precious and valuable traded timber species of the genus Dalbergia. For chemotaxonomical discrimination between these easily confused species, the total extractive content of the three wood species was determined using four different organic solvents. Fourier transform infrared (FTIR) spectroscopy was used to analyze functional group differences in the extractive components, inferring the types of principal chemical components according to characteristic peak positions, intensities, and shapes. Gas chromatography-mass spectrometry (GC-MS) was carried out a detailed characterization of the extractive components. The relative content of individual chemical components was determined by area normalization. Results revealed differences in the chemical components and total and individual extract contents of the three Dalbergia species, indicating that FTIR and GC-MS spectroscopy can be applied to identify and discriminate between Dalbergia cultrate, Dalbergia latifolia, and Dalbergiamelanoxylon.

Application of Solvent-Assisted Dual-Network Hydrogel in Water-Based Drilling Fluid for Lost Circulation Treatment in Fractured Formation.

During oil and gas well construction, lost circulation caused substantial nonoperation time and extra costs, and hydrogel, resilient and environmentally friendly, was one of the major types of material for lost circulation treatment. To migrate the weak bonding and hydrothermal degradation of conventional single network hydrogels, dual network (DN) hydrogel was prepared and immersed in solvents of polyethylene glycol (PEG), ethylene glycol, and glycerol. The swelling of DN gels at different temperatures was studied with water content and swelling rate tests, and the gel structural and morphology was characterized with attenuated total reflectance infrared spectroscopy (ATR-IR) and scanning electron microscopy test. Then, the compression test and fracture plugging performance test were conducted to study the strength of the gel. The results show that compared to those in ethylene glycol and glycerin, DN gel after immersion in PEG (DN-PEG) exhibits greater compression strength and better plugging performance even at high temperatures. The compression strength of DN-PEG was twice that of DN hydrogel before immersion, and its fracture plug breaking pressure can reach over 10.0 MPa. After undergoing hydrothermal treatment at 90 °C, the compression strength of the DN-PEG was nearly 20 times that of the DN hydrogel, and the fracture plug breaking pressure was still 2.81 MPa. According to ATR-IR spectroscopy, as the molecular weight of the solvent increases, more hydroxyl groups in the PEG have better ability to bind with hydrogen bonds, which greatly inhibits the swelling and polymer chain breakage, thereby reducing hydrothermal degradation in the strength of the dual-network hydrogel. Our work proposed an effective method to reduce the degradation of hydrogel in water at high temperature, and the prepared DN-PEG hydrogel was a promising material for lost circulation treatments in fractured formation.

Plastic Events of the Vestibular Nucleus: the Initiation of Central Vestibular Compensation.

Vestibular compensation is a physiological response of the vestibular organs within the inner ear. This adaptation manifests during consistent exposure to acceleration or deceleration, with the vestibular organs incrementally adjusting to such changes. The molecular underpinnings of vestibular compensation remain to be fully elucidated, yet emerging studies implicate associations with neuroplasticity and signal transduction pathways. Throughout the compensation process, the vestibular sensory neurons maintain signal transmission to the central equilibrium system, facilitating adaptability through alterations in synaptic transmission and neuronal excitability. Notable molecular candidates implicated in this process include variations in ion channels and neurotransmitter profiles, as well as neuronal and synaptic plasticity, metabolic processes, and electrophysiological modifications. This study consolidates the current understanding of the molecular events in vestibular compensation, augments the existing research landscape, and evaluates contemporary therapeutic strategies. Furthermore, this review posits potential avenues for future research that could enhance our comprehension of vestibular compensation mechanisms.

Causes of Corneal Melt After the Boston Keratoprosthesis Type I: The Chinese People's Liberation Army General Hospital Experience.

PURPOSE: The purpose of this study was to evaluate the long-term incidence, risk factors, and the management of corneal melt following Boston type I keratoprosthesis (B-KPro I) implantation. METHODS: This is a retrospective observational case series. Data were collected regarding demographics, preoperative characteristics, incidence, and outcomes of corneal melt in 102 patients who underwent B-KPro I in the Chinese PLA General Hospital between 2011 and 2018, with a follow-up period ranging from 4 to 11 years. RESULTS: Chemical burn was the most common indication for B-KPro I (n = 56; 53.8%), followed by ocular trauma (n = 26; 25.0%). During the follow-up period (107 ± 25.7 months), corneal melt occurred in 60 cases among 37 eyes (35.6%), with an incidence of 20.2% at 1 year after surgery. Fourteen cases presented with recurrent corneal melt. Patients with multiple corneal allograft failures had a higher risk of corneal melt. Thermal burns, compared with alkali burns, significantly elevated the odds ratio (OR) of corneal melt (OR, 5.11; 95% confidence interval, 1.05-24.86; P = 0.043). CONCLUSIONS: Corneal melt significantly reduced the retention time of KPro ( P < 0.01), and its coexistence with other complications further shortened the retention time. A specific pattern of corneal melt occurrence was identified, with a peak incidence at 1 year postoperatively. Our findings suggest variations in the risk of corneal melt among different indications, with thermal burns carrying the highest OR. Moreover, each previous failed keratoplasty doubled the risk of corneal melt after B-KPro I.

Comparative long-term outcomes of natural orifice specimen extraction surgery and conventional laparoscopic colectomy for left-sided colorectal cancer: a propensity score-matched analysis.

BACKGROUND: Natural orifice specimen extraction surgery (NOSES) is currently widely used in left-sided colorectal cancer. Some clinical comparative studies have been conducted, providing evidence of its safety and oncological benefits. However, these studies are typically characterized by small sample sizes and short postoperative follow-up periods. Consequently, in this research, the authors adopt the propensity score matching method to undertake a large-scale retrospective comparative study on NOSES colectomy for left-sided colorectal cancer, with the goal of further augmenting the body of evidence-based medical support for NOSES. METHODS: This retrospective study involved patients who underwent NOSES colectomy and conventional laparoscopic (CL) colectomy for left-sided colorectal cancer between January 2014 and April 2021. In the NOSES group, specimens were extracted through the anus with the help of a Cai tube (homemade invention: ZL201410168748.2). The patients were matched at a ratio of 1:1 according to age, sex, BMI, tumor diameter, tumor location (descending and splenic flexure colon/ sigmoid colon/ middle and upper rectum), tumor height from anal verge, ASA grade, previous abdominal surgery, clinical pathologic stage, preoperative CEA. After matching, 132 patients in the NOSES group and 132 patients in the CL group were eligible for analysis. RESULTS: Compared with CL group, NOSES group was associated with decreased postoperative maximum pain score (2.6±0.7 vs. 4.7±1.7, P=0.000), less additional analgesia required (6.8 vs. 34.8%, P=0.000), faster time to passage of flatus (2.3±0.6 days vs. 3.3±0.7 days, P=0.000), less wound infection (0.0 vs. 6.1%, P=0.007), and longer operative time (212.5±45.8 min vs. 178.0±43.4 min, P=0.000). No significant differences were observed in estimated blood loss, time to resume regular diet, postoperative hospital stay, conversion to open surgery or conventional minilaparotomy, total morbidity, readmission, mortality, pathologic outcomes, and Wexner incontinence score between groups. After a median follow-up of 63.0 months, the 5-year overall survival rates were 88.3 versus 85.0% (P=0.487), disease-free survival rates were 82.9 versus 83.6% (P=0.824), and the local recurrence rates were 4.4 versus 4.0% (P=0.667) in the NOSES and CL groups, respectively. CONCLUSIONS: This study suggests that NOSES colectomy using a Cai tube for left-sided colorectal cancer is a safe and feasible option with better cosmetic results, less pain, faster recovery of gastrointestinal function, and comparable long-term clinical and oncologic outcomes to CL colectomy.

Irinotecan combined with co-stimulatory molecule blockade prolongs survival of cardiac allografts in alloantigen-primed mice.

Memory T cells play an important role in graft rejection. In this study, we investigated the potential effect of Irinotecan (CPT-11), a topoisomerase I inhibitor used in the treatment of a variety of solid tumor malignancies, on memory T cells. CPT-11 treatment alone or combined with blocking monoclonal antibodies (mAb) against co-stimulatory molecules (LFA-1 and CD154) was evaluated in the prevention of heart transplant rejection in alloantigen-primed mice. Our data suggest that CPT-11 reduced the expression of IL-2/IFN-γ and increased IL-10/TGF-ß expression in both peripheral blood and within the grafts. CPT-11 could also inhibit alloresponses of memory T cells, while decreasing the proportion of CD4(+) memory T cells in the spleen of the recipients and significantly reducing serum alloantibody levels. Our study highlights obvious synergistic effects of CPT-11 when combined with co-stimulatory molecule blockade in prolonging the survival of cardiac allografts in alloantigen-primed mice.

Recent Advances in DNA Nanotechnology-Enabled Biosensors for Virus Detection.

Virus-related infectious diseases are serious threats to humans, which makes virus detection of great importance. Traditional virus-detection methods usually suffer from low sensitivity and specificity, are time-consuming, have a high cost, etc. Recently, DNA biosensors based on DNA nanotechnology have shown great potential in virus detection. DNA nanotechnology, specifically DNA tiles and DNA aptamers, has achieved atomic precision in nanostructure construction. Exploiting the programmable nature of DNA nanostructures, researchers have developed DNA nanobiosensors that outperform traditional virus-detection methods. This paper reviews the history of DNA tiles and DNA aptamers, and it briefly describes the Baltimore classification of virology. Moreover, the advance of virus detection by using DNA nanobiosensors is discussed in detail and compared with traditional virus-detection methods. Finally, challenges faced by DNA nanobiosensors in virus detection are summarized, and a perspective on the future development of DNA nanobiosensors in virus detection is also provided.

FGIN-1-27 Mitigates Radiation-induced Mitochondrial Hyperfunction and Cellular Hyperactivation in Cultured Astrocytes.

Radiation-induced brain injury (RBI) poses a significant challenge in the context of radiotherapy for intracranial tumors, necessitating a comprehensive understanding of the cellular and molecular mechanisms involved. While prior investigations have underscored the role of astrocyte activation and excessive vascular endothelial growth factor production in microvascular damage associated with RBI, there remains a scarcity of studies examining the impact of radiation on astrocytes, particularly regarding organelles such as mitochondria. Thus, our study aimed to elucidate alterations in astrocyte and mitochondrial functionality following radiation exposure, with a specific focus on evaluating the potential ameliorative effects of translocator protein 18 kDa(TSPO) ligands. In this study, cultured astrocytes were subjected to X-ray irradiation, and their cellular states and mitochondrial functions were examined and compared to control cells. Our findings revealed that radiation-induced astrocytic hyperactivation, transforming them into the neurotoxic A1-type, concomitant with reduced cell proliferation. Additionally, radiation triggered mitochondrial hyperfunction, heightened the mitochondrial membrane potential, and increased oxidative metabolite production. However, following treatment with FGIN-1-27, a TSPO ligand, we observed a restoration of mitochondrial function and a reduction in oxidative metabolite production. Moreover, this intervention mitigated astrocyte hyperactivity, decreased the number of A1-type astrocytes, and restored cell proliferative capacity. In conclusion, our study has unveiled additional manifestations of radiation-induced astrocyte dysfunction and validated that TSPO ligands may serve as a promising therapeutic strategy to mitigate this dysfunction. It has potential clinical implications for the treatment of RBI.

Multiple Hydrogen Bonding-Assisted High-Strength Hydrogel of Silica/Polyacrylamide Nanocomposite Cross-Linked with Polyethylenimine.

The nanocomposite gel system has been successfully applied as a water shutoff agent to enhance oil recovery (EOR) or for plugging to control lost circulation events. In this study, the silica/polyacrylamide nanocomposite was synthesized via in situ free radical polymerization of acrylamide (AM) monomers in the presence of silica nanoparticles. The composite was cross-linked with polyethylenimine to prepare a high-strength hydrogel. The viscosity test was conducted to determine the gelation time of the gel. Rheological measurements and sand pack breakthrough pressure tests were carried out to measure the gel strength. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) and scanning electron microscopy (SEM) tests were adopted to characterize the structure and morphology of the gel. The results show that compared to polyacrylamide (PAM) gel, the gelation time of the nanocomposite gel will decrease with increasing gel elasticity modulus, and the breakthrough pressure of the nanocomposite gel is 29.82 MPa, which increased by 65%. As shown in the ATR-FTIR test, this can be attributed to the presence of multiple hydrogen bonds for the PAM molecule with both silica and quartz sand particles. In the composite gel, hydrogen bonding mainly forms between the O atoms of PAM and the H atom on the surface of silica, enhancing gel strength and elasticity modulus with more cross-linking density and less porosity. Moreover, H bonding between additional -NH2 of PAM and quartz sand particles helps improve gel plugging pressure. However, in the silica and PAM mixture gel, the H bonding of silica occupies -NH2 of PAM, which became unavailable to attach on the sand surface, reducing the breakthrough pressure by 30%, although it can enhance the rheological strength. This study suggests that in situ composite of silica in PAM can not only greatly improve gel rheological strength but also help maintain the strong adhesion of PAM molecules onto quartz sand, resulting in better plugging performance in the sand reservoir.

The optimal tibial tunnel placement to maximize the graft bending angle in the transtibial posterior cruciate ligament reconstruction: a quantitative assessment in three-dimensional computed tomography model.

Background: The graft bending angle created by the graft and the tibial tunnel has inevitably occurred during the transtibial posterior cruciate ligament (PCL) reconstruction. However, few studies quantitively analyzed this angle. This study aimed to (I) explore the optimal tibial tunnel placement to maximize the graft bending angle in the PCL reconstruction; (II) reveal the effect of the tibial tunnel placement on the graft bending angle. Methods: This was an in-vitro surgical simulation study based on the three-dimensional (3D) computed tomography (CT). A total of 55 patients who took CT scanning for knee injuries were selected (April 2020 to January 2022) from the local hospital database for review. The 3D knee models were established on the Mimics software based on the knees' CT data. Using the Rhinoceros software to simulate the transtibial PCL reconstruction on the 3D CT knee model. The anteromedial and anterolateral tibial tunnel approaches were simulated with different tibial tunnel angle. The graft bending angle and tibial tunnel length (TTL) with different tibial tunnel angles were quantitively analyzed. Results: The graft bending angle in anterolateral approach with a 50° tibial tunnel angle was significantly greater than it in anteromedial approach with a 60° tibial tunnel angle (P<0.001). There was no difference of the graft bending angle between the anterolateral approach with a 40° tibial tunnel angle and the anteromedial approach with a 60° tibial tunnel angle (P>0.05). The graft bending angle showed a strong correlation with the tibial tunnel angle (for anteromedial approach: r=0.759, P<0.001; for anterolateral approach: r=0.702, P<0.001). The best-fit equation to calculate the graft bending angle based on the tibial tunnel angle was Y = 0.89*X + 59.05 in anteromedial tibial tunnel approach (r2=0.576), and was Y = 0.78*X + 80.21 anterolateral tibial tunnel approach (r2=0.493). Conclusions: The graft bending angle and TTL will significantly increase as the tibial tunnel angle becomes greater. Maximizing the tibial tunnel angle (50° tibial tunnel angle) in the anterolateral approach could provide the greatest graft bending angle in the PCL reconstruction. No matter how the tibial tunnel angle is changed in the anteromedial approach, using anterolateral approach might reduce the killer turn effect more effectively than using anteromedial approach.

Highly stable cellulose nanofiber/polyacrylamide aerogel via in-situ physical/chemical double crosslinking for highly efficient Cu(II) ions removal.

Water pollution by heavy metal ions is a global concern due to detrimental effects on the ecological environment and human health. To solve the problem of the stability and recyclability of the traditional adsorbents, we proposed three-dimensional lamellar porous cellulose nanofiber/polyacrylamide composite aerogel with outstanding pollutants adsorption, easy regeneration, and multiple recycling. The aerogel adsorbent was prepared by a two-step method via facile in-situ physical/chemical double cross-linking and freeze-drying processes. The resulting aerogels showed good thermal stability, superior water stability and excellent adsorption properties, with a maximum Langmuir adsorption capacity for Cu(II) ions up to 240 mg g-1 due to the in-situ physical/chemical combination of anionic polyacrylamide and carbonylated cellulose nanofibers. The adsorption mechanism was the electrostatic attraction, chelating effect and complex formation driving forces for the fast and efficient adsorption of Cu(II) ions. The removal efficiency of the aerogels for Cu(II) remained above 80% after 10 adsorption/regeneration cycles, suggesting its outstanding recyclability. The proposed aerogel adsorbent shows noteworthy potential for the practical treatment of heavy metal ion wastewater.