RESUMO
BACKGROUND: The effects of heat acclimation (HA) on the hypothalamus after exertional heatstroke (EHS) and the specific mechanism have not been fully elucidated, and this study aimed to address these questions. METHODS: In the present study, rats were randomly assigned to the control, EHS, HA, or HA + EHS groups (n = 9). Hematoxylin and eosin (H&E) staining was used to examine pathology. Tandem mass tag (TMT)-based proteomic analysis was utilized to explore the impact of HA on the protein expression profile of the hypothalamus after EHS. Bioinformatics analysis was used to predict the functions of the differentially expressed proteins. The differential proteins were validated by western blotting. An enzyme-linked immunosorbent assay was used to measure the expression levels of inflammatory cytokines in the serum. RESULTS: The H&E staining (n = 5) results revealed that there were less structural changes in hypothalamus in the HA + EHS group compared with the EHS group. Proteomic analysis (n = 4) revealed that proinflammatory proteins such as argininosuccinate synthetase (ASS1), high mobility group protein B2 (HMGB2) and vimentin were evidently downregulated in the HA + EHS group. The levels of interleukin (IL)-1ß, IL-1, and IL-8 were decreased in the serum samples (n = 3) from HA + EHS rats. CONCLUSIONS: HA may alleviate hypothalamic damage caused by heat attack by inhibiting inflammatory activities, and ASS1, HMGB2 and vimentin could be candidate factors involved in the exact mechanism.
Assuntos
Golpe de Calor , Hipotálamo , Proteômica , Ratos Sprague-Dawley , Animais , Hipotálamo/metabolismo , Golpe de Calor/metabolismo , Ratos , Masculino , Esforço Físico/fisiologia , Modelos Animais de DoençasRESUMO
For zinc-metal batteries, the instable chemistry at Zn/electrolyte interphasial region results in severe hydrogen evolution reaction (HER) and dendrite growth, significantly impairing Zn anode reversibility. Moreover, an often-overlooked aspect is this instability can be further exacerbated by the interaction with dissolved cathode species in full batteries. Here, inspired by sustained-release drug technology, an indium-chelated resin protective layer (Chelex-In), incorporating a sustained-release mechanism for indium, is developed on Zn surface, stabilizing the anode/electrolyte interphase to ensure reversible Zn plating/stripping performance throughout the entire lifespan of Zn//V2O5 batteries. The sustained-release indium onto Zn electrode promotes a persistent anticatalytic effect against HER and fosters uniform heterogeneous Zn nucleation. Meanwhile, on the electrolyte side, the residual resin matrix with immobilized iminodiacetates anions can also repel detrimental anions (SO4 2- and polyoxovanadate ions dissolved from V2O5 cathode) outside the electric double layer. This dual synergetic regulation on both electrode and electrolyte sides culminates a more stable interphasial environment, effectively enhancing Zn anode reversibility in practical high-areal-capacity full battery systems. Consequently, the bio-inspired Chelex-In protective layer enables an ultralong lifespan of Zn anode over 2800â h, which is also successfully demonstrated in ultrahigh areal capacity Zn//V2O5 full batteries (4.79â mAh cm-2).
RESUMO
With the improved lithium-ion transference number near unity, the low conductivity of single lithium-ion conducting solid polymer electrolytes (SLIC-SPEs) still hinders their application in high-rate batteries. Though some empirical conclusions on the conducting mechanism of SLIC-SPEs have been obtained, a more comprehensive study on the quantitative relationship between the molecular structure factors and ionic conduction performance is expected. In this study, a model structure that contains adjustable main chain and anion groups in the polyethylene oxide (PEO) matrix was used to clarify the influence of molecular structural factors on ionic conductivity and electrochemical stability of SLIC-SPEs. The anionic group was further disassembled into the intermediate group and end group while the main chain structure was distinguished into different degrees of polymerization and various lengths of the spacers between anions. Therefore, a well-defined molecular structure was employed to describe its relationship with ionic conductivity. In addition, the dissociation degree of salts and mobility of ions changing with the molecular structure were also discussed to explore the fundamental causes of conductivity. It can be concluded that the anion group affects the conductivity mainly via the dissociation degree, while the main chain structure impacts the conductivity by both dissociation degree and mobility.
RESUMO
To obtain high-visual-quality underwater images by image post-processing, many underwater image restoration and enhancement methods have been proposed. Underwater image quality assessment (UIQA) methods have been developed to compare these restoration and enhancement methods. This paper comprehensively summarizes the subjective and objective UIQA methods, metrics, and datasets. Experiments are conducted on two underwater image datasets to analyze the performance of several typical UIQA metrics. Suggestions for further research directions are put forward as well.
RESUMO
Zn-I2 batteries stand out in the family of aqueous Zn-metal batteries (AZMBs) due to their low-cost and immanent safety. However, Zn dendrite growth, polyiodide shuttle effect and sluggish I2 redox kinetics result in dramatically capacity decay of Zn-I2 batteries. Herein, a Janus separator composed of functional layers on anode/cathode sides is designed to resolve these issues simultaneously. The cathode layer of Fe nanoparticles-decorated single-wall carbon nanotubes can effectively anchor polyiodide and catalyze the redox kinetics of iodine species, while the anode layer of cation exchange resin rich in -SO3 - groups is beneficial to attract Zn2+ ions and repel detrimental SO4 2- /polyiodide, improving the stability of cathode/anode interfaces synergistically. Consequently, the Janus separator endows outstanding cycling stability of symmetrical cells and high-areal-capacity Zn-I2 batteries with a lifespan over 2500â h and a high-areal capacity of 3.6â mAh cm-2 .
RESUMO
The efficient and accurate prediction of urban travel demand, which is a hot topic in intelligent transportation research, is challenging due to its complicated spatial-temporal dependencies, dynamic nature, and uneven distribution. Most existing forecasting methods merely considered the static spatial dependencies while ignoring the influence of the diversity of dynamic demand patterns and/or uneven distribution. In this paper, we propose a traffic demand forecasting framework of a hybrid dynamic graph convolutional network (HDGCN) model to deeply capture the characteristics of urban travel demand and improve prediction accuracy. In HDGCN, traffic flow similarity graphs are designed according to the dynamic nature of travel demand, and a dynamic graph sequence is generated according to time sequence. Then, the dynamic graph convolution module and the standard graph convolution module are introduced to extract the spatial features from dynamic graphs and static graphs, respectively. Finally, the spatial features of the two components are fused and combined with the gated recurrent unit (GRU) to learn the temporal features. The efficiency and accuracy of the HDGCN model in predicting urban taxi travel demand are verified by using the taxi data from Manhattan, New York City. The modeling and comparison results demonstrate that the HDGCN model can achieve stable and effective prediction for taxi travel demand compared with the state-of-the-art baseline models. The proposed model could be used for the real-time, accurate, and efficient travel demand prediction of urban taxi and other urban transportation systems.
Assuntos
Automóveis , Meios de Transporte , Previsões , Análise Espacial , Meios de Transporte/métodos , ViagemRESUMO
Developing advanced electrode materials with enhanced charge-transfer kinetics is the key to realizing fast energy storage technologies. Commonly used modification strategies, such as nanoengineering and carbon coating, are mainly focused on electron transfer and bulk Li+ diffusion. Nonetheless, the desolvation behavior, which is considered as the rate-limiting process for charge-storage, is rarely studied. Herein, we designed a nitridation layer on the surface of Wadsley-Roth phase FeNb11O29 (FNO-x@N) to act as a desolvation promoter. Theoretical calculations demonstrate that the adsorption and desolvation of solvated Li+ is efficiently improved at FNO-x@N/electrolyte interphase, leading to the reduced desolvation energy barrier. Moreover, the nitridation layer can also help to prevent solvent cointercalation during Li+ insertion, leading to advantageous shrinkage of block area and reduced volume change of lattice cell during cycling. Consequently, FNO-x@N exhibits a high-rate capacity of 129.7 mAh g-1 with negligible capacity decay for 10â¯000 cycles.
RESUMO
INTRODUCTION/AIMS: Exertional rhabdomyolysis (ER) often occurs during prolonged intense exercise in hot environments, posing a threat to the health of military personnel. In this study we aimed to investigate possible risk factors for ER and provide further empirical data for prevention and clinical treatment strategies. METHODS: A retrospective investigation of 116 concurrent ER cases was conducted. Conditional logistic regression analyses were performed to assess the association between each potential risk (or protective) factor and ER. The clinical characteristics of the 71 hospitalized patients were analyzed descriptively. RESULTS: After screening, the following variables significantly increased the risk of ER: shorter length of service (recruits; odds ratios [OR], 7.49; 95% confidence interval [CI], 2.58-21.75); higher body mass index (BMI; OR, 1.14, 95% CI, 1.03-1.26); lack of physical exercise in the last half year (less than once per month; OR, 3.20; 95% CI, 1.08-9.44); and previous heat injury (OR, 2.94; 95% CI, 1.26-6.89). Frequent fruit consumption (OR, 0.57; 95% CI, 0.33-0.99), active hydration habit (OR, 0.37; 95% CI, 0.20-0.67), water replenishment of more than 2 L on the training day (OR, 0.15; 95% CI, 0.05-0.45), and water replenishment of at least 500 mL within 1 hour before training (OR, 0.33; 95% CI, 0.12-0.88) significantly decreased the risk of ER. Of the 71 hospitalized patients, 41 (57.7%) were diagnosed with hypokalemia on admission. DISCUSSION: In military training, emphasis should be placed on incremental adaptation training before more intense training, and close attention should be given to overweight and previously sedentary recruits. Fluid replenishment before exercise, increased fruit intake, and proper potassium supplementation may help prevent ER.
Assuntos
Adaptação Fisiológica/fisiologia , Índice de Massa Corporal , Exercício Físico/fisiologia , Esforço Físico/fisiologia , Rabdomiólise/diagnóstico , Adolescente , Humanos , Masculino , Programas de Rastreamento , Militares , Estudos Retrospectivos , Rabdomiólise/etiologia , Rabdomiólise/fisiopatologia , Fatores de Risco , Fatores de Tempo , Adulto JovemRESUMO
Solid-state electrolyte materials with superior lithium ionic conductivities are vital to the next-generation Li-ion batteries. Molecular dynamics could provide atomic scale information to understand the diffusion process of Li-ion in these superionic conductor materials. Here, we implement the deep potential generator to set up an efficient protocol to automatically generate interatomic potentials for Li10GeP2S12-type solid-state electrolyte materials (Li10GeP2S12, Li10SiP2S12, and Li10SnP2S12). The reliability and accuracy of the fast interatomic potentials are validated. With the potentials, we extend the simulation of the diffusion process to a wide temperature range (300 K-1000 K) and systems with large size (â¼1000 atoms). Important technical aspects such as the statistical error and size effect are carefully investigated, and benchmark tests including the effect of density functional, thermal expansion, and configurational disorder are performed. The computed data that consider these factors agree well with the experimental results, and we find that the three structures show different behaviors with respect to configurational disorder. Our work paves the way for further research on computation screening of solid-state electrolyte materials.
RESUMO
The measurement of steroid hormones provided critical information in the clinical evaluation of endocrine disorders. In this study, we developed a high-throughput solid-phase extraction method for the analysis of 26 steroids in human serum and plasma samples by liquid chromatography-tandem mass spectrometry. Chromatographic conditions and sample preparation were optimized to achieve good separation and maximum sensitivity for these analytes. Under the optimum conditions, good linearities were achieved in the quantitative range for each steroid hormone with the correlation coefficients (r) larger than 0.99. The limits of quantitation of the method were in the range from 0.0005 to 0.7901 ng/mL. The recoveries were in the range of 87.2-114.2% with intra- and interday precision lower than 9.94%. This method has already been applied to series of samples from clinical trials, and there was no significant difference between serum and ethylenediaminetetraacetic acid plasma samples.
Assuntos
Hormônios Esteroides Gonadais/sangue , Cromatografia Líquida , Humanos , Espectrometria de Massas em TandemRESUMO
The use of Li metal as the anode for Li-based batteries has attracted considerable attention due to its ultrahigh energy density. However, the formation of Li dendrites, uneven deposition, and huge volume changes hinder its reliable implementation. These issues become much more severe in commercial carbonate-based electrolytes than in ether-based electrolytes. Herein, a rationally designed three-dimensional graphene/Ag aerogel (3D G-Ag aerogel) is proposed for Li metal anodes with long cycle life in carbonate-based electrolytes. The modified lithiophilic nature of G-Ag aerogel, realized through decoration with Ag NPs, effectively decreases the energy barrier for Li nucleation, regulating uniform Li deposition behavior. Moreover, the highly flexible, conductive 3D porous architecture with hierarchical mesopores and macropores can readily accommodate deposited Li and ensures the integrity of the conductive network during cycling. Consequently, high coulombic efficiency (over 93.5 %) and a significantly long cycle life (1589â h) over 200â cycles, with a relatively high cycling capacity of 2.0â mAh cm-2 , can easily be achieved, even in a carbonate-based electrolyte. Considering the intrinsic high voltage windows of carbonate-based electrolytes, matching the G-Ag aerogel Li metal anode with a high-voltage cathode can be envisaged for the fabrication of high-energy-density Li secondary batteries.
RESUMO
Ammonia gas sensors are very essential in many industries and everyday life. However, their complicated fabrication process, severe environmental fabrication requirements and desorption of residual ammonia molecules result in high cost and hinder their market acceptance. Here, laser direct writing is used to fabricate three parallel porous 3D graphene lines on a polyimide (PI) tape to simply construct an ammonia gas sensor. The middle one works as an ammonia sensing element and the other two on both sides work as heaters to improve the desorption performance of the sensing element to ammonia gas molecules. The graphene lines were characterized by scanning electron microscopy and Raman spectroscopy. The response and recovery time of the sensor without heating are 214 s and 222 s with a sensitivity of 0.087% ppm-1 for sensing 75 ppm ammonia gas, respectively. The experimental results prove that under the optimized heating temperature of about 70 °C the heaters successfully help implement complete desorption of residual NH3 showing a good sensitivity and cyclic stability.
RESUMO
The lack of suitable high-voltage cathode materials has hindered the development of rechargeable magnesium batteries (RMBs). Here, mesoporous Na3 V2 (PO4 )3 /C (NVP/C) spheres have been synthesized through a facile spray-drying-annealing method, and their electrochemically desodiated phase NaV2 (PO4 )3 /C (ED-NVP/C) has been investigated as an intercalation host for Mg2+ ions. The obtained ED-NVP/C exhibits an average discharge voltage of around 2.5â V (vs. Mg2+ /Mg), higher than those of most previously reported cathode materials. In addition, it can deliver an initial discharge capacity of 88.8â mA h g-1 at 20â mA g-1 , with good cycling stability. Ex situ X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) results demonstrate that the electrochemical reaction is based on an intercalation mechanism and shows good reversibility. Galvanostatic intermittent titration technique (GITT) data have revealed that the intercalation process involves a two-phase transition. The reported ED-NVP/C cathode material with high working voltage offers promising potential for application in RMBs.
RESUMO
The Li2TiO3-coated LiNi0.5Co0.2Mn0.3O2 (LTO@NCM) cathode materials are synthesized via an in situ co-precipitation method followed by the lithiation process and thermal annealing. The Li2TiO3 coating layer is designed to strongly adhere to the core-material with 3D diffusion pathways for Li(+) ions. Electrochemical tests suggest that compared with pristine NCM, Li2TiO3 serves as both a Li ion conductive layer and a protective coating layer against the attack of HF in the electrolyte, and remarkably improves the cycling performance at higher charged state and rate capability of the LTO@NCM composite material. What is more, phase transformation of NCM and dissolution of metal ions at high-temperatures at 4.6 V cutoff potential are effectively suppressed after LTO-coating. Our study demonstrates that LTO-coating on the surface of NCM is a viable method to improve the electrochemical performance of NCM, especially at high rates and under high-voltage charged conditions.
RESUMO
In rats with unilateral nephrectomy and cardiac dysfunction, renal function deteriorates at an accelerated rate, as evidenced by increased proteinuria. Whether myocardial infarct-induced heart failure (HF) exacerbates renal injury in hypertensive rats with mild renal injury has not been reported. Rats underwent either coronary ligation or sham surgery. Thirty spontaneously hypertensive rats (SHRs) aged 8 weeks were randomly divided into two groups. Group 1 was the sham group, in which the rats underwent thoracotomy without ligation of the coronary artery. Group 2 underwent coronary artery ligation. The rats in group 2 underwent coronary artery ligation on week 0. The experiment lasted 12 weeks. Urine was collected in metabolic cages over a 24-h period. Urine was collected from the rats 2 days before the end of the experiment, and the ratio of urinary protein to urinary creatinine was measured in the clinical laboratory. All rats were examined by echocardiogram one day before the end of the experiment. On the last day of the experiment, blood was collected and sent to the laboratory for analysis. Hematoxylin-eosin (HE) and periodic acid-Schiff (PAS) staining were performed on heart and kidney sections. The ejection fraction in group 2 was lower than that in group 1 (P < 0.001). The urinary albumin to creatinine ratio in group 2 was greater than that in group 1 (P < 0.001). The urea and creatinine levels in group 1 were significantly lower than those in group 2 (P < 0.01). The levels of brain natriuretic peptide (BNP), neutrophil gelatinase-associated lipocalin (NGAL) and cystatin C were greater in the second group than in the first group (P < 0.05). The interleukin-1ß (IL-1ß) and interleukin-6 (IL-6) levels in group 2 were significantly greater than those in group 1 (P < 0.001). The malondialdehyde (MDA) levels in Group 2 were greater than those in Group 1 (P < 0.01). The glutathione peroxidase (GSH-Px) levels in Group 2 were lower than those in Group 1 (P < 0.05). The level of angiotensin II (AT-II) in group 1 was lower than that in group 2 (P < 0.001). Cardiac dysfunction secondary to myocardial infarction could induce cardiorenal interactions in SHRs. It could be interpreted by the activation of oxidative stress, changes in inflammation and alteration of renin-angiotensin-aldosterone system.
Assuntos
Síndrome Cardiorrenal , Vasos Coronários , Modelos Animais de Doenças , Insuficiência Cardíaca , Ratos Endogâmicos SHR , Animais , Síndrome Cardiorrenal/etiologia , Síndrome Cardiorrenal/fisiopatologia , Síndrome Cardiorrenal/patologia , Síndrome Cardiorrenal/urina , Insuficiência Cardíaca/etiologia , Insuficiência Cardíaca/fisiopatologia , Insuficiência Cardíaca/metabolismo , Ratos , Masculino , Ligadura , Vasos Coronários/fisiopatologia , Rim/patologia , Rim/fisiopatologia , Rim/metabolismo , Creatinina/sangue , Hipertensão/fisiopatologia , Hipertensão/complicações , Hipertensão/etiologia , Hipertensão/metabolismoRESUMO
Silicon is expected to be used as a high theoretical capacity anode material in lithium-ion batteries with high energy densities. However, the huge volume change incurred when silicon de-embeds lithium ions, leading to destruction of the electrode structure and a rapid reduction in battery capacity. Although binders play a key role in maintaining the stability of the electrode structure, commonly used binders cannot withstand the large volume expansion of the silicon. To alleviate this problem, we propose a PGC cross-linking reconfiguration binder based on poly(acrylic acid) (PAA), gelatin (GN), and ß-cyclodextrin (ß-CD). Within PGC, PAA supports the main chain and provides a large number of carboxyl groups (-COOH), GN provides rich carboxyl and amide groups that can form a cross-linking network with PAA, and ß-CD offers rich hydroxyl groups and a cone-shaped hollow ring structure that can alleviate stress accumulation in the polymer chain by forming a new dynamic cross-linking coordination conformation during stretching. In the half cell, the silicon negative prepared by the PGC binder exhibited a high specific capacity and capacity maintenance ratio, and the specific capacity of the silicon negative electrode prepared by the PGC binder is still 1809 mAh g-1 and the capacity maintenance ratio is 73.76% following 200 cycles at 2 A g-1 current density, indicating that PGC sufficiently maintains the silicon negative structure during the battery cycle. The PGC binder has a simple preparation method and good capacity retention ability, making it a potential reference for the further development of silicon negative electrodes.
RESUMO
As the preferred anode material for sodium-ion batteries, hard carbon (HC) confronts significant obstacles in providing a long and dominant low-voltage plateau to boost the output energy density of full batteries. The critical challenge lies in precisely enhancing the local graphitization degree to minimize Na+ ad-/chemisorption, while effectively controlling the growth of internal closed nanopores to maximize Na+ filling. Unfortunately, traditional high-temperature preparation methods struggle to achieve both objectives simultaneously. Herein, a transient sintering-involved kinetically-controlled synthesis strategy is proposed that enables the creation of metastable HCs with precisely tunable carbon phases and low discharge/charge voltage plateaus. By optimizing the temperature and width of thermal pulses, the high-throughput screened HCs are characterized by short-range ordered graphitic micro-domains that possess accurate crystallite width and height, as well as appropriately-sized closed nanopores. This advancement realizes HC anodes with significantly prolonged low-voltage plateaus below 0.1 V, with the best sample exhibiting a high plateau capacity of up to 325 mAh g-1. The energy density of the HC||Na3V2(PO4)3 full battery can therefore be increased by 20.7%. Machine learning study explicitly unveils the "carbon phase evolution-electrochemistry" relationship. This work promises disruptive changes to the synthesis, optimization, and commercialization of HC anodes for high-energy-density sodium-ion batteries.
RESUMO
Aqueous zinc-iodine (Zn-I2) batteries have attracted extensive attention due to their merits of inherent safety, wide natural abundance, and low cost. However, their application is seriously hindered by the irreversible capacity loss resulting from both anode and cathode. Herein, an anion concentrated electrolyte (ACE) membrane is designed to manipulate the Zn2+ ion flux on the zinc anode side and restrain the shuttle effect of polyiodide ions on the I2 cathode side simultaneously to realize long-lifetime separator-free Zn-I2 batteries. The ACE membrane with abundant sulfonic acid groups possesses a multifunctional amalgamation of good mechanical strength, guided Zn2+ ion transport, and effective charge repulsion of polyiodide ions. Moreover, rich ether oxygen, carbonyl, and S-O bonds in anionic polymer chains will form hydrogen bonds with water to reduce the proportion of free water in the ACE membrane, inhibiting the water-induced interfacial side reactions of the Zn metal anode. Besides, DFT calculations and in-situ UV-vis and in situ Raman results reveal that the shuttle effect of polyiodide ions is also significantly suppressed. Therefore, the ACE membrane enables a long lifespan of Zn anodes (3700 h) and excellent cycling stability of Zn-I2 batteries (10000 cycles), thus establishing a substantial base for their practical applications.
RESUMO
Traditional lithium batteries cannot work well at low temperatures due to the sluggish desolvation process, which limits their applications in low-temperature fields. Among various previously reported approaches, solvation regulation of electrolytes is of great importance to overcome this obstacle. In this work, a tetrahydrofuran (THF)-based localized high-concentration electrolyte is reported, which possesses the advantages of a unique solvation structure and improved mobility, enabling a Li/lithium manganate (LMO) battery to cycle stably at room temperature (retains 85.9% after 300 cycles) and to work at a high rate (retains 69.0% at a 10C rate). Apart from that, this electrolyte demonstrates superior low-temperature performance, delivering over 70% capacity at -70 °C and maintaining 72.5 mAh g-1 (≈77.1%) capacity for 200 cycles at a 1C rate at -40 °C. Also, even when the rate increases to 5C, the battery could still operate well at -40 °C. This work demonstrates that solvation regulation has a significant impact on the kinetics of cells at low temperatures and provides a design method for future electrolyte design.
RESUMO
With excellent energy densities and highly safe performance, solid-state lithium batteries (SSLBs) have been hailed as promising energy storage devices. Solid-state electrolyte is the core component of SSLBs and plays an essential role in the safety and electrochemical performance of the cells. Composite polymer electrolytes (CPEs) are considered as one of the most promising candidates among all solid-state electrolytes due to their excellent comprehensive performance. In this review, we briefly introduce the components of CPEs, such as the polymer matrix and the species of fillers, as well as the integration of fillers in the polymers. In particular, we focus on the two major obstacles that affect the development of CPEs: the low ionic conductivity of the electrolyte and high interfacial impedance. We provide insight into the factors influencing ionic conductivity, in terms of macroscopic and microscopic aspects, including the aggregated structure of the polymer, ion migration rate and carrier concentration. In addition, we also discuss the electrode-electrolyte interface and summarize methods for improving this interface. It is expected that this review will provide feasible solutions for modifying CPEs through further understanding of the ion conduction mechanism in CPEs and for improving the compatibility of the electrode-electrolyte interface.