An Immunocompetent Mongolian Gerbil Model for Hepatitis E Virus Genotype 1 Infection.

BACKGROUND AND AIMS: Hepatitis E virus (HEV), primarily genotype 1 (HEV-1), causes approximately 20.1 million infections, 44,000 deaths, and 3000 stillbirths annually. Current evidence indicates that HEV-1 is only transmitted in humans. Here, we evaluated whether Mongolian gerbils can serve as animal models for HEV-1 infection. METHODS: Mongolian gerbils were used for HEV-1 and hepatitis E virus genotype 3 infection experiments. HEV infection parameters, including detection of HEV RNA and HEV antigen, liver function assessment, and histopathology, were evaluated. RESULTS: We adapted a clinical isolate of HEV-1 for Mongolian gerbils by serial passaging in feces of aged male gerbils. The gerbil-adapted strain obtained at passage 3 induced a robust, acute HEV infection, characterized by stable fecal virus shedding, elevated liver enzymes, histopathologic changes in the liver, and seroconversion to anti-HEV. An infectious complementary DNA clone of the adapted virus was generated. HEV-1-infected pregnant gerbils showed a high rate of maternal mortality and vertical transmission. HEV RNA or antigens were detected in the liver, kidney, intestine, placenta, testis, and fetus liver. Liver and placental transcriptomic analyses indicated activation of host immunity. Tacrolimus prolonged HEV-1 infection, whereas ribavirin cleared infection. The protective efficacy of a licensed HEV vaccine was validated using this model. CONCLUSIONS: HEV-1 efficiently infected Mongolian gerbils. This HEV-1 infection model will be valuable for investigating hepatitis E immunopathogenesis and evaluating vaccines and antivirals against HEV.

A system for multiplexed selection of aptamers with exquisite specificity without counterselection.

Aptamers have proven to be valuable tools for the detection of small molecules due to their remarkable ability to specifically discriminate between structurally similar molecules. Most aptamer selection efforts have relied on counterselection to eliminate aptamers that exhibit unwanted cross-reactivity to interferents or structurally similar relatives to the target of interest. However, because the affinity and specificity characteristics of an aptamer library are fundamentally unknowable a priori, it is not possible to determine the optimal counterselection parameters. As a result, counterselection experiments require trial-and-error approaches that are inherently inefficient and may not result in aptamers with the best combination of affinity and specificity. In this work, we describe a high-throughput screening process for generating high-specificity aptamers to multiple targets in parallel while also eliminating the need for counterselection. We employ a platform based on a modified benchtop sequencer to conduct a massively parallel aptamer screening process that enables the selection of highly specific aptamers against multiple structurally similar molecules in a single experiment, without any counterselection. As a demonstration, we have selected aptamers with high affinity and exquisite specificity for three structurally similar kynurenine metabolites that differ by a single hydroxyl group in a single selection experiment. This process can easily be adapted to other small-molecule analytes and should greatly accelerate the development of aptamer reagents that achieve exquisite specificity for their target analytes.

MicroRNA-93-5p regulates odontogenic differentiation and dentin formation via KDM6B.

BACKGROUND: Epigenetic factors influence the odontogenic differentiation of dental pulp stem cells and play indispensable roles during tooth development. Some microRNAs can epigenetically regulate other epigenetic factors like DNA methyltransferases and histone modification enzymes, functioning as epigenetic-microRNAs. In our previous study, microarray analysis suggested microRNA-93-5p (miR-93-5p) was differentially expressed during the bell stage in human tooth germ. Prediction tools indicated that miR-93-5p may target lysine-specific demethylase 6B (KDM6B). Therefore, we explored the role of miR-93-5p as an epi-miRNA in tooth development and further investigated the underlying mechanisms of miR-93-5p in regulating odontogenic differentiation and dentin formation. METHODS: The expression pattern of miR-93-5p and KDM6B of dental pulp stem cells (DPSCs) was examined during tooth development and odontogenic differentiation. Dual luciferase reporter and ChIP-qPCR assay were used to validate the target and downstream regulatory genes of miR-93-5p in human DPSCs (hDPSCs). Histological analyses and qPCR assays were conducted for investigating the effects of miR-93-5p mimic and inhibitor on odontogenic differentiation of hDPSCs. A pulpotomy rat model was further established, microCT and histological analyses were performed to explore the effects of KDM6B-overexpression and miR-93-5p inhibition on the formation of tertiary dentin. RESULTS: The expression level of miR-93-5p decreased as odontoblast differentiated, in parallel with elevated expression of histone demethylase KDM6B. In hDPSCs, miR-93-5p overexpression inhibited the odontogenic differentiation and vice versa. MiR-93-5p targeted 3' untranslated region (UTR) of KDM6B, thereby inhibiting its protein translation. Furthermore, KDM6B bound the promoter region of BMP2 to demethylate H3K27me3 marks and thus upregulated BMP2 transcription. In the rat pulpotomy model, KDM6B-overexpression or miR-93-5p inhibition suppressed H3K27me3 level in DPSCs and consequently promoted the formation of tertiary dentin. CONCLUSIONS: MiR-93-5p targets epigenetic regulator KDM6B and regulates H3K27me3 marks on BMP2 promoters, thus modulating the odontogenic differentiation of DPSCs and dentin formation.

Histone-modifying enzymes: Roles in odontogenesis and beyond.

OBJECTIVES: Odontogenesis, an intricate process initiated by epithelium-mesenchyme interaction, is meticulously regulated by a cascade of regulatory mechanisms. Epigenetic modifications, especially histone modification, have been found to exhibit spatiotemporal specificity during tooth development. However, the expression patterns and roles of enzymes associated with histone modifications have yet to be systematically explored in odontogenesis. This review aims to summarize the histone-modifying enzymes in odontogenesis and their regulation mechanism during tooth development and provide the potential theoretical basis for the clinical management and intervention of dental developmental diseases. SUBJECTS AND METHODS: This study conducted a systematic search across PubMed and Web of Science databases, utilizing the keywords "odontogenesis," "histone modification," and "enzyme" for pertinent articles. RESULTS: No doubt histone modification contributes extensively to odontogenesis regulation, and the disturbances in histone modifications can derange the odontogenesis process. CONCLUSION: Further studies are warranted to elucidate these roles and their potential downstream effects, positioning histone modifications as a pivotal focal point for unraveling the intricacies of tooth development and regeneration.

Global bibliometric mapping of dental development research for the period 2012-2021.

BACKGROUND: Dental development is a complex long-term biological process, significant attention should be paid to the dental development and health of this critical time window in childhood for the oral health of the whole life cycle. AIM: This study aimed to conduct bibliometric studies on the scientific outputs of global dental development research by the CiteSpace software. DESIGN: The global scientific outputs about dental development between January 1, 2012, and December 31, 2021, retrieved from Web of Science Core Collection, CiteSpace, and Microsoft Excel were applied for this bibliometric study. RESULTS: A total of 3746 reviews and articles were obtained from the Web of Science core database for exploring the basic publication characteristics, hotspots, and frontiers of this research field. The results showed that dental development is gaining more researcher's attention over time. In terms of countries, the USA and China were the major contributors to this research area. At the institutional level, Sichuan University ranked first. Meanwhile, international cooperation across regions was quite active. The Journal of Dental Research has exerted a broad and far-reaching influence on dental development research in both publications and citations. James P Simmer, Jungwook Kim, Charles E Smith, and Jan CC Hu are among the most influential scholars in this field. Finally, the future hotspots were proposed, covering three directions: dental analysis, tooth development, and post-translational phosphorylation of histones. CONCLUSION: In the past decade, the field of dental development has developed rapidly, and the cooperation between scholars, institutions, and researchers has become increasingly close.

Appropriate timing of treatment contributes to better root development of impacted anterior teeth in children.

INTRODUCTION: This study investigated the effects of different timings of orthodontic treatment on the root development of impacted anterior teeth in children. METHODS: The cone-beam computed tomography (CBCT) data of 45 children with impacted anterior teeth were divided into unformed root (UR) group or basically formed root (BFR) group to evaluate root length (RL) and root growth length (RGL) of impacted teeth and contralateral nonimpacted teeth pretreatment and posttreatment. In addition, 22 patients with impacted dilaceration were selected to assess the effects of the crown-root angle and root development stage on RL and RGL. The Student t test, Wilcoxon test, analysis of variance, and multiple linear regression analysis were used for statistical evaluations. RESULTS: The RL of treated impacted teeth pretreatment and posttreatment was significantly shorter than contralateral nonimpacted teeth values (P <0.05). Posttreatment, the RL and RGL of impacted teeth of the UR group were significantly greater than those of the BFR group (P <0.05). The RGL of the dilacerated root in the UR group was considerably higher than in the BFR group (P <0.05). The larger crown-root angle group had a longer posttreatment RL (P <0.05). Multiple linear regression analysis revealed that the Nolla stage of impacted teeth and RL of contralateral teeth pretreatment significantly influenced the RL of impacted teeth posttreatment. CONCLUSIONS: Prompt orthodontic treatment is necessary for children with impacted anterior teeth to release the impacted state and achieve better root development. The root length of a dilacerated tooth continued to develop under treatment, but the crown-root angle partly constrained it.

Genome-wide identification of Brassicaceae histone modification genes and their responses to abiotic stresses in allotetraploid rapeseed.

BACKGROUND: Histone modification is an important epigenetic regulatory mechanism and essential for stress adaptation in plants. However, systematic analysis of histone modification genes (HMs) in Brassicaceae species is lacking, and their roles in response to abiotic stress have not yet been identified. RESULTS: In this study, we identified 102 AtHMs, 280 BnaHMs, 251 BcHMs, 251 BjHMs, 144 BnHMs, 155 BoHMs, 137 BrHMs, 122 CrHMs, and 356 CsHMs in nine Brassicaceae species, respectively. Their chromosomal locations, protein/gene structures, phylogenetic trees, and syntenies were determined. Specific domains were identified in several Brassicaceae HMs, indicating an association with diverse functions. Syntenic analysis showed that the expansion of Brassicaceae HMs may be due to segmental and whole-genome duplications. Nine key BnaHMs in allotetraploid rapeseed may be responsible for ammonium, salt, boron, cadmium, nitrate, and potassium stress based on co-expression network analysis. According to weighted gene co-expression network analysis (WGCNA), 12 BnaHMs were associated with stress adaptation. Among the above genes, BnaPRMT11 simultaneously responded to four different stresses based on differential expression analysis, while BnaSDG46, BnaHDT10, and BnaHDA1 participated in five stresses. BnaSDG46 was also involved in four different stresses based on WGCNA, while BnaSDG10 and BnaJMJ58 were differentially expressed in response to six different stresses. In summary, six candidate genes for stress resistance (BnaPRMT11, BnaSDG46, BnaSDG10, BnaJMJ58, BnaHDT10, and BnaHDA1) were identified. CONCLUSIONS: Taken together, these findings help clarify the biological roles of Brassicaceae HMs. The identified candidate genes provide an important reference for the potential development of stress-tolerant oilseed plants.

LncRNA CARMN facilitates odontogenic differentiation of dental pulp cells by impairing EZH2.

OBJECTIVE: This study aimed to reveal the potential role of CARMN in odontogenic differentiation of dental pulp cells (DPCs). METHODS: Laser capture microdissection was used to detect Carmn in DPCs and odontoblasts in P0 mice. After manipulating CARMN expression in odontogenic differentiation induced hDPCs, the state of odontogenic differentiation was evaluated by ALP staining, ARS, and related marker expression in qRT-PCR and western blotting. The subcutaneous transplantation of HA/ß-TCP loaded with hDPCs was performed to verify CARMN's role in promoting odontogenic differentiation in vivo. RNAplex and RIP were employed to reveal potential mechanism of CARMN in hDPCs. RESULTS: CARMN expressed more abundantly in odontoblasts than DPCs in P0 mice. CARMN expression boosted during in vitro odontogenic differentiation of hDPCs. CARMN overexpression enhanced odontogenic differentiation of hDPCs in vitro, while inhibition impaired the process. CARMN overexpression in HA/ß-TCP composites promoted more mineralized nodule formation in vivo. CARMN knockdown led to soared EZH2, while CARMN overexpression brought about EZH2 inhibition. CARMN functioned via direct interaction with EZH2. CONCLUSIONS: The results uncovered CARMN as a modulator during the odontogenic differentiation of DPCs. CARMN promoted odontogenic differentiation of DPCs by impairing EZH2.

Epigenetics in developmental defects of enamel: A scoping review.

OBJECTIVES: The significant role of epigenetics has been revealed in normal enamel formation process and occurrence of developmental defects. This presented literature is aiming at summarizing the regulatory function of epigenetics in physiological amelogenesis process and reviewing the epigenetic mechanisms in occurrence of developmental defects of enamel (DDE), so as to provide biological foundation evidence to support early predication and clinical management of DDE. METHOD: An extensive literature review was conducted using electronic databases MEDLINE (through PubMed), Web of Science and EMBASE up to November 30, 2022. Studies about epigenetic effects on enamel tissue or cells associated with amelogenesis, including in vivo studies using human or animal models, and in vitro studies, are selected. RESULTS: A total of 22 studies were included. Epigenetic factors or effects specifically activate or silence certain genes, which may regulate related biological activities including cell proliferation, cell differentiation, enamel secretion, and mineralization during the process of amelogenesis. Once the status of epigenetic modification is altered, the quantity and quality of enamel may both be disturbed, which can finally result in DDE. CONCLUSION: Epigenetics plays a noteworthy role of regulating the amelogenesis process and DDE potentially by altering the expression levels of genes related to enamel formation, providing a new perspective of early predication and clinical management of DDE.

METTL3 enhances dentinogenesis differentiation of dental pulp stem cells via increasing GDF6 and STC1 mRNA stability.

BACKGROUND: The dentinogenesis differentiation of dental pulp stem cells (DPSCs) is controlled by the spatio-temporal expression of differentiation related genes. RNA N6-methyladenosine (m6A) methylation, one of the most abundant internal epigenetic modification in mRNA, influences various events in RNA processing, stem cell pluripotency and differentiation. Methyltransferase like 3 (METTL3), one of the essential regulators, involves in the process of dentin formation and root development, while mechanism of METTL3-mediated RNA m6A methylation in DPSC dentinogenesis differentiation is still unclear. METHODS: Immunofluorescence staining and MeRIP-seq were performed to establish m6A modification profile in dentinogenesis differentiation. Lentivirus were used to knockdown or overexpression of METTL3. The dentinogenesis differentiation was analyzed by alkaline phosphatase, alizarin red staining and real time RT-PCR. RNA stability assay was determined by actinomycin D. A direct pulp capping model was established with rat molars to reveal the role of METTL3 in tertiary dentin formation. RESULTS: Dynamic characteristics of RNA m6A methylation in dentinogenesis differentiation were demonstrated by MeRIP-seq. Methyltransferases (METTL3 and METTL14) and demethylases (FTO and ALKBH5) were gradually up-regulated during dentinogenesis process. Methyltransferase METTL3 was selected for further study. Knockdown of METTL3 impaired the DPSCs dentinogenesis differentiation, and overexpression of METTL3 promoted the differentiation. METTL3-mediated m6A regulated the mRNA stabiliy of GDF6 and STC1. Furthermore, overexpression of METTL3 promoted tertiary dentin formation in direct pulp capping model. CONCLUSION: The modification of m6A showed dynamic characteristics during DPSCs dentinogenesis differentiation. METTL3-mediated m6A regulated in dentinogenesis differentiation through affecting the mRNA stability of GDF6 and STC1. METTL3 overexpression promoted tertiary dentin formation in vitro, suggesting its promising application in vital pulp therapy (VPT).

Facile fabrication of Fe/Zr binary MOFs for arsenic removal in water: High capacity, fast kinetics and good reusability.

A water-stable bimetallic Fe/Zr metal-organic framework [UiO-66(Fe/Zr)] for exceptional decontamination of arsenic in water was fabricated through a facile one-step strategy. The batch adsorption experiments revealed the excellent performances with ultrafast adsorption kinetics due to the synergistic effects of two functional centers and large surface area (498.33 m2/g). The absorption capacity of UiO-66(Fe/Zr) for arsenate [As(V)] and arsenite [As(III)] reached as high as 204.1 mg/g and 101.7 mg/g, respectively. Langmuir model was suitable to describe the adsorption behaviors of arsenic on UiO-66(Fe/Zr). The fast kinetics (adsorption equilibrium in 30 min, 10 mg/L As) and pseudo-second-order model implied the strong chemisorption between arsenic ions and UiO-66(Fe/Zr), which was further confirmed by DFT theoretical calculations. The results of FT-IR, XPS analysis and TCLP test demonstrated that arsenic was immobilized on the surface of UiO-66(Fe/Zr) through Fe/Zr-O-As bonds, and the leaching rates of the adsorbed As(III) and As(V) from the spent adsorbent were only 5.6% and 1.4%, respectively. UiO-66(Fe/Zr) can be regenerated for five cycles without obvious removal efficiency decrease. The original arsenic (1.0 mg/L) in lake and tap water was effectively removed in 2.0 hr [99.0% of As(III) and 99.8% of As(V)]. The bimetallic UiO-66(Fe/Zr) has great potentials in water deep purification of arsenic with fast kinetics and high capacity.

Exceptional removal and immobilization of selenium species by bimetal-organic frameworks.

Binary metallic organic frameworks can always play excellent functions for pollutants removal. One binary MOFs, UiO-66(Fe/Zr)), was newly synthesized and applied to remove aquatic selenite (SeIV) and selenate (SeVI). The adsorption behaviors and mechanisms were investigated using batch experiments, spectroscopic analyses, and theoretical calculations (DFT). The characterization results showed that the material inherited the topological structure of UiO-66 and excellent thermal stability. The large specific surface area (467.52 m2/g) and uniform mesoporous structures of the synthesized MOFs resulted in fast adsorption efficiency and high adsorption capacity for selenium species. The adsorbent kept high adsorption efficiency in a wide pH range from 2 to 11 with good anti-interference ability. The maximum adsorption capacity for Se(IV) and Se(VI) reached as high as 196 mg/g at pH 3 and 258 mg/g at pH 5, respectively. The process was conformed to fit pseudo-second-order kinetics and Langmuir isotherm, and could be explained by the formation of Fe/Zr-O-Se bond on the material surface, which was interpreted by the results of XPS, FTIR and DFT calculation. The regeneration and TCLP experiments demonstrated that UiO-66(Fe/Zr) could be regenerated for five cycles without obvious decrease of efficiencies, and the leaching rate of the adsorbed Se(IV) and Se(VI) in the spent adsorbent were only 4.8% and 2.3%. More than 99% of original Se(IV) and Se(VI) in the lake and tap water samples (1.0 mg/L of Se) could be removed in 2.0 h.

A Grip Strength Estimation Method Using a Novel Flexible Sensor under Different Wrist Angles.

It is a considerable challenge to realize the accurate, continuous detection of handgrip strength due to its complexity and uncertainty. To address this issue, a novel grip strength estimation method oriented toward the multi-wrist angle based on the development of a flexible deformation sensor is proposed. The flexible deformation sensor consists of a foaming sponge, a Hall sensor, an LED, and photoresistors (PRs), which can measure the deformation of muscles with grip strength. When the external deformation squeezes the foaming sponge, its density and light intensity change, which is detected by a light-sensitive resistor. The light-sensitive resistor extended to the internal foaming sponge with illuminance complies with the extrusion of muscle deformation to enable relative muscle deformation measurement. Furthermore, to achieve the speed, accuracy, and continuous detection of grip strength with different wrist angles, a new grip strength-arm muscle model is adopted and a one-dimensional convolutional neural network based on the dynamic window is proposed to recognize wrist joints. Finally, all the experimental results demonstrate that our proposed flexible deformation sensor can accurately detect the muscle deformation of the arm, and the designed muscle model and convolutional neural network can continuously predict hand grip at different wrist angles in real-time.

Genome-Wide Identification of Gramineae Brassinosteroid-Related Genes and Their Roles in Plant Architecture and Salt Stress Adaptation.

Brassinosteroid-related genes are involved in regulating plant growth and stress responses. However, systematic analysis is limited to Gramineae species, and their roles in plant architecture and salt stress remain unclear. In this study, we identified brassinosteroid-related genes in wheat, barley, maize, and sorghum and investigated their evolutionary relationships, conserved domains, transmembrane topologies, promoter sequences, syntenic relationships, and gene/protein structures. Gene and genome duplications led to considerable differences in gene numbers. Specific domains were revealed in several genes (i.e., HvSPY, HvSMOS1, and ZmLIC), indicating diverse functions. Protein-protein interactions suggested their synergistic functions. Their expression profiles were investigated in wheat and maize, which indicated involvement in adaptation to stress and regulation of plant architecture. Several candidate genes for plant architecture (ZmBZR1 and TaGSK1/2/3/4-3D) and salinity resistance (TaMADS22/47/55-4B, TaGRAS19-4B, and TaBRD1-2A.1) were identified. This study is the first to comprehensively investigate brassinosteroid-related plant architecture genes in four Gramineae species and should help elucidate the biological roles of brassinosteroid-related genes in crops.

Genome-Wide Identification of Brassicaceae Hormone-Related Transcription Factors and Their Roles in Stress Adaptation and Plant Height Regulation in Allotetraploid Rapeseed.

Phytohormone-related transcription factors (TFs) are involved in regulating stress responses and plant growth. However, systematic analysis of these TFs in Brassicaceae is limited, and their functions in stress adaptation and plant height (PH) regulation remain unclear. In this study, 2115 hormone-related TFs were identified in nine Brassicaceae species. Specific domains were found in several Brassicaceae hormone-related TFs, which may be associated with diverse functions. Syntenic analysis indicated that expansion of these genes was mainly caused by segmental duplication, with whole-genome duplication occurring in some species. Differential expression analysis and gene co-expression network analysis identified seven phytohormone-related TFs (BnaWRKY7, 21, 32, 38, 52, BnaGL3-4, and BnaAREB2-5) as possible key genes for cadmium (Cd) toxicity, salinity stress, and potassium (K) and nitrogen (N) deficiencies. Furthermore, BnaWRKY42 and BnaARR21 may play essential roles in plant height. Weighted gene co-expression network analysis (WGCNA) identified 15 phytohormone-related TFs and their potential target genes regulating stress adaptation and plant height. Among the above genes, BnaWRKY56 and BnaWRKY60 responded to four different stresses simultaneously, and BnaWRKY42 was identified in two dwarf rapeseeds. In summary, several candidate genes for stress resistance (BnaWRKY56 and BnaWRKY60) and plant height (BnaWRKY42) were identified. These findings should help elucidate the biological roles of Brassicaceae hormone-related TFs, and the identified candidate genes should provide a genetic resource for the potential development of stress-tolerant and dwarf oilseed plants.

Defects of cohesin loader lead to bone dysplasia associated with transcriptional disturbance.

Cohesin loader nipped-B-like protein (Nipbl) is increasingly recognized for its important role in development and cancer. Cornelia de Lange Syndrome (CdLS), mostly caused by heterozygous mutations of Nipbl, is an autosomal dominant disease characterized by multiorgan malformations. However, the regulatory role and underlying mechanism of Nipbl in skeletal development remain largely elusive. In this study, we constructed a Nipbl-a Cas9-knockout (KO) zebrafish, which displayed severe retardation of global growth and skeletal development. Deficiency of Nipbl remarkably compromised cell growth and survival, and osteogenic differentiation of mammalian osteoblast precursors. Furthermore, Nipbl depletion impaired the cell cycle process, and caused DNA damage accumulation and cellular senescence. In addition, nucleolar fibrillarin expression, global rRNA biogenesis, and protein translation were defective in the Nipbl-depleted osteoblast precursors. Interestingly, an integrated stress response inhibitor (ISRIB), partially rescued Nipbl depletion-induced cellular defects in proliferation and apoptosis, osteogenesis, and nucleolar function. Simultaneously, we performed transcriptome analysis of Nipbl deficiency on human neural crest cells and mouse embryonic fibroblasts in combination with Nipbl ChIP-Seq. We found that Nipbl deficiency caused thousands of differentially expressed genes including some important genes in bone and cartilage development. In conclusion, Nipbl deficiency compromised skeleton development through impairing osteoblast precursor cell proliferation and survival, and osteogenic differentiation, and also disturbing the expression of some osteogenesis-regulatory genes. Our study elucidated that Nipbl played a pivotal role in skeleton development, and supported the fact that treatment of ISRIB may provide an early intervention strategy to alleviate the bone dysplasia of CdLS.

Genome-wide identification of Brassicaceae B-BOX genes and molecular characterization of their transcriptional responses to various nutrient stresses in allotetraploid rapeseed.

BACKGROUND: B-box (BBX) genes play important roles in plant growth regulation and responses to abiotic stresses. The plant growth and yield production of allotetraploid rapeseed is usually hindered by diverse nutrient stresses. However, no systematic analysis of Brassicaceae BBXs and the roles of BBXs in the regulation of nutrient stress responses have not been identified and characterized previously. RESULTS: In this study, a total of 536 BBXs were identified from nine brassicaceae species, including 32 AtBBXs, 66 BnaBBXs, 41 BoBBXs, 43 BrBBXs, 26 CrBBXs, 81 CsBBXs, 52 BnBBXs, 93 BjBBXs, and 102 BcBBXs. Syntenic analysis showed that great differences in the gene number of Brassicaceae BBXs might be caused by genome duplication. The BBXs were respectively divided into five subclasses according to their phylogenetic relationships and conserved domains, indicating their diversified functions. Promoter cis-element analysis showed that BBXs probably participated in diverse stress responses. Protein-protein interactions between BnaBBXs indicated their functions in flower induction. The expression profiles of BnaBBXs were investigated in rapeseed plants under boron deficiency, boron toxicity, nitrate limitation, phosphate shortage, potassium starvation, ammonium excess, cadmium toxicity, and salt stress conditions using RNA-seq data. The results showed that different BnaBBXs showed differential transcriptional responses to nutrient stresses, and some of them were simultaneously responsive to diverse nutrient stresses. CONCLUSIONS: Taken together, the findings investigated in this study provided rich resources for studying Brassicaceae BBX gene family and enriched potential clues in the genetic improvement of crop stress resistance.

Genome-wide identification of Gramineae histone modification genes and their potential roles in regulating wheat and maize growth and stress responses.

BACKGROUND: In plants, histone modification (HM) genes participate in various developmental and defense processes. Gramineae plants (e.g., Triticum aestivum, Hordeum vulgare, Sorghum bicolor, Setaria italica, Setaria viridis, and Zea mays) are important crop species worldwide. However, little information on HM genes is in Gramineae species. RESULTS: Here, we identified 245 TaHMs, 72 HvHMs, 84 SbHMs, 93 SvHMs, 90 SiHMs, and 90 ZmHMs in the above six Gramineae species, respectively. Detailed information on their chromosome locations, conserved domains, phylogenetic trees, synteny, promoter elements, and gene structures were determined. Among the HMs, most motifs were conserved, but several unique motifs were also identified. Our results also suggested that gene and genome duplications potentially impacted the evolution and expansion of HMs in wheat. The number of orthologous gene pairs between rice (Oryza sativa) and each Gramineae species was much greater than that between Arabidopsis and each Gramineae species, indicating that the dicotyledons shared common ancestors. Moreover, all identified HM gene pairs likely underwent purifying selection based on to their non-synonymous (Ka)/synonymous (Ks) nucleotide substitutions. Using published transcriptome data, changes in TaHM gene expression in developing wheat grains treated with brassinosteroid, brassinazole, or activated charcoal were investigated. In addition, the transcription models of ZmHMs in developing maize seeds and after gibberellin treatment were also identified. We also examined plant stress responses and found that heat, drought, salt, insect feeding, nitrogen, and cadmium stress influenced many TaHMs, and drought altered the expression of several ZmHMs. Thus, these findings indicate their important functions in plant growth and stress adaptations. CONCLUSIONS: Based on a comprehensive analysis of Gramineae HMs, we found that TaHMs play potential roles in grain development, brassinosteroid- and brassinazole-mediated root growth, activated charcoal-mediated root and leaf growth, and biotic and abiotic adaptations. Furthermore, ZmHMs likely participate in seed development, gibberellin-mediated leaf growth, and drought adaptation.

The Role of TNF-α in the Pathogenesis of Temporomandibular Disorders.

Temporomandibular disorder (TMD) is an oral dentofacial disease that is related to multiple factors such as disordered dental occlusion, emotional stress, and immune responses. In the past decades, tumor necrosis factor-alpha (TNF-α), a pleiotropic cytokine, has provided valuable insight into the pathogenesis of TMD, particularly in settings associated with inflammation. It is thought that TNF-α participates in the pathogenesis of TMD by triggering immune responses, deteriorating bone and cartilage, and mediating pain in the temporomandibular joint (TMJ). Initially, TNF-α plays the role of "master regulator" in the complex immune network by increasing or decreasing the production of other inflammatory cytokines. Then, the effects of TNF-α on cells, particularly on chondrocytes and synovial fibroblasts, result in pathologic cartilage degradation in TMD. Additionally, multiple downstream cytokines induced by TNF-α and neuropeptides can regulate central sensitization and inflammatory pain in TMD. Previous studies have also found some therapies target TMD by reducing the production of TNF-α or blocking TNF-α-induced pathways. All this evidence highlights the numerous associations between TNF-α and TMD; however, they are currently not fully understood and further investigations are still required for specific mechanisms and treatments targeting specific pathways. Therefore, in this review, we explored general mechanisms of TNF-α, with a focus on molecules in TNF-α-mediated pathways and their potential roles in TMD treatment. In view of the high clinical prevalence rate of TMD and damage to patients' QOL, this review provides adequate evidence for studying links between inflammation and TMD in further research and investigation.

Electrospun metal-organic frameworks hybrid nanofiber membrane for efficient removal of As(III) and As(V) from water.

Metal-organic frameworks (MOFs) have been widely applied for pollutants removal in water. However, the powdered MOFs are always suffered from aggregation during use and difficult collection after use. These problems discount their efficiency and inhibit their reusability. In this work, Zr-based MOF (UiO-66) was successfully imprisoned into a water-stable polyacrylonitrile (PAN) substrate by electrospinning. The containing UiO-66 hybrid membrane was confirmed by instrumental characterizations and its stability was also investigated by ICP-OES analysis. The obtained composite membrane can efficiently remove both arsenite (AsIII) and arsenate (AsV) from water under natural pH conditions. The adsorption kinetic fitted well with pseudo-second-order model and was dominated by chemisorption. Its adsorption isotherm can be described by Langmuir model. The maximal adsorption capacities of the hybrid membrane for As(V) and As(III) were 42.17 mg/g and 32.90 mg/g, respectively. Our results demonstrated that the MOFs-dispersed electrospun nanofiber membrane can greatly inherit the MOFs' original adsorption properties and exhibits good regenerability without loss of MOFs. Electrospinning is an effective and practical method for the preparation of MOFs hybrid membrane, which makes the composite very easy to be collected after use.