RESUMO
Peroxidase-like catalysts are safe and low-cost candidates to tackle the dilemma in constructing sustainable cathodic heterogeneous electro-Fenton (CHEF) catalysts for water purification, but the elusive structure-property relationship of enzyme-like catalysts constitutes a pressing challenge for the advancement of CHEF processes in practically relevant water and wastewater treatment. Herein, we probe the origins of catalytic efficiency in the CHEF process by artificially tailoring the peroxidase-like activity of Fe3O4 through a series of acetylated chitosan-based hydrogels, which serve as ecofriendly alternatives to traditional carbon shells. The optimized acetylated chitosan wrapping Fe3O4 hydrogel on the cathode shows an impressive activity and stability in CHEF process, overcoming the complicated and environmentally unfavored procedures in the electro-Fenton-related processes. Structural characterizations and theoretical calculations reveal that the amide group in chitosan can modulate the intrinsic redox capacity of surficial Fe sites on Fe3O4 toward CHEF catalysis via the neutral hydrogen bond. This work provides a sustainable path and molecule-level insight for the rational design of high-efficiency CHEF catalysts and beyond.
RESUMO
A precise modulation of heterogeneous catalysts in structural and surface properties promises the development of more sustainable advanced oxidation water purification technologies. However, while catalysts with superior decontamination activity and selectivity are already achievable, maintaining a long-term service life of such materials remains challenging. Here, we propose a crystallinity engineering strategy to break the activity-stability tradeoff of metal oxides in Fenton-like catalysis. The amorphous/crystalline cobalt-manganese spinel oxide (A/C-CoMnOx) provided highly active, hydroxyl group-rich surface, with moderate peroxymonosulfate (PMS)-binding affinity and charge transfer energy and strong pollutant adsorption, to trigger concerted radical and nonradical reactions for efficient pollutant mineralization, thereby alleviating the catalyst passivation by oxidation intermediate accumulation. Meanwhile, the surface-confined reactions, benefited from the enhanced adsorption of pollutants at A/C interface, rendered the A/C-CoMnOx/PMS system ultrahigh PMS utilization efficiency (82.2%) and unprecedented decontamination activity (rate constant of 1.48 min-1) surpassing almost all the state-of-the-art heterogeneous Fenton-like catalysts. The superior cyclic stability and environmental robustness of the system for real water treatment was also demonstrated. Our work unveils a critical role of material crystallinity in modulating the Fenton-like catalytic activity and pathways of metal oxides, which fundamentally improves our understanding of the structure-activity-selectivity relationships of heterogeneous catalysts and may inspire material design for more sustainable water purification application and beyond.
RESUMO
Electrocatalytic reduction of nitrate to ammonia (NO3RR) is gaining attention for low carbon emissions and environmental protection. However, low ammonia production rate and poor selectivity have remained major challenges in this multi-proton coupling process. Herein, we report a facile strategy toward a novel Fe-based hybrid structure composed of Fe single atoms and Fe3C atomic clusters that demonstrates outstanding performance for synergistic electrocatalytic NO3RR. By operando synchrotron Fourier transform infrared spectroscopy and theoretical computation, we clarify that Fe single atoms serve as the active site for NO3RR, while Fe3C clusters facilitate H2O dissociation to provide protons (*H) for continued hydrogenation reactions. As a result, the Fe-based electrocatalyst exhibits ammonia Faradaic efficiency of nearly 100%, with a corresponding production rate of 24768 µg h-1 cm-2 at -0.4 V vs RHE, exceeding most reported metal-based catalysts. This research provides valuable guidance toward multi-step reactions.
RESUMO
Photocatalytic CO2 reduction holds great potential for alleviating global energy and environmental issues, where the electronic structure of the catalytic center plays a crucial role. However, the spin state, a key descriptor of electronic properties, is largely overlooked. Herein, we present a simple strategy to regulate the spin states of catalytic Co centers by changing their coordination environment by exchanging the Co species into a stable Zn-based metal-organic framework (MOF) to afford Co-OAc, Co-Br, and Co-CN for CO2 photoreduction. Experimental and DFT calculation results suggest that the distinct spin states of the Co sites give rise to different charge separation abilities and energy barriers for CO2 adsorption/activation in photocatalysis. Consequently, the optimized Co-OAc with the highest spin-state Co sites presents an excellent photocatalytic CO2 activity of 2325.7 µmol·g-1·h-1 and selectivity of 99.1% to CO, which are among the best in all reported MOF photocatalysts, in the absence of a noble metal and additional photosensitizer. This work underlines the potential of MOFs as an ideal platform for spin-state manipulation toward improved photocatalysis.
RESUMO
Inspired by enzymatic catalysis, it is crucial to construct hydrogen-bonding-rich microenvironment around catalytic sites; unfortunately, its precise construction and understanding how the distance between such microenvironment and catalytic sites affects the catalysis remain significantly challenging. In this work, a series of metal-organic framework (MOF)-based single-atom Ru1 catalysts, namely, Ru1/UiO-67-X (X = -H, -m-(NH2)2, -o-(NH2)2), have been synthesized, where the distance between the hydrogen-bonding microenvironment and Ru1 sites is modulated by altering the location of amino groups. The -NH2 group can form hydrogen bonds with H2O, constituting a unique microenvironment that causes an increased water concentration around the Ru1 sites. Remarkably, Ru1/UiO-67-o-(NH2)2 displays a superior photocatalytic hydrogen production rate, â¼4.6 and â¼146.6 times of Ru1/UiO-67-m-(NH2)2 and Ru1/UiO-67, respectively. Both experimental and computational results suggest that the close proximity of amino groups to the Ru1 sites in Ru1/UiO-67-o-(NH2)2 improves charge transfer and H2O dissociation, accounting for the promoted photocatalytic hydrogen production.
RESUMO
Although electro-Fenton (EF) processes can avoid the safety risks raised by concentrated hydrogen peroxide (H2O2), the Fe(III) reduction has always been either unstable or inefficient at high pH, resulting in catalyst deactivation and low selectivity of H2O2 activation for producing hydroxyl radicals (â¢OH). Herein, we provided a strategy to regulate the surface dipole moment of TiO2 by Fe anchoring (TiO2-Fe), which, in turn, substantially increased the H2O2 activation for â¢OH production. The TiO2-Fe catalyst could work at pH 4-10 and maintained considerable degradation efficiency for 10 cycles. Spectroscopic analysis and a theoretical study showed that the less polar Fe-O bond on TiO2-Fe could finely tune the polarity of H2O2 to alter its empty orbital distribution, contributing to better ciprofloxacin degradation activity within a broad pH range. We further verified the critical role of the weakened polarity of H2O2 on its homolysis into â¢OH by theoretically and experimentally investigating Cu-, Co-, Ni-, Mn-, and Mo-anchored TiO2. This concept offers an avenue for elaborate design of green, robust, and pH-universal cathodic Fenton-like catalysts and beyond.
Assuntos
Peróxido de Hidrogênio , Titânio , Peróxido de Hidrogênio/química , Concentração de Íons de Hidrogênio , Titânio/química , Ferro/química , Radical Hidroxila/química , Catálise , EletrodosRESUMO
Pt-based alloy catalysts may promise considerable mass activity (MA) for oxygen reduction but are generally unsustainable over long-term cycles, particularly in practical proton exchange membrane fuel cells (PEMFCs). Herein, we report a series of Pt-based intermetallic compounds (Pt3Co, PtCo, and Pt3Ti) enclosed by ultrathin Pt skin with an average particle size down to about 2.3 nm, which deliver outstanding cyclic MA and durability for oxygen reduction. By breaking size limitation during ordered atomic transformation in Pt alloy systems, the MA and durability of subsize Pt-based intermetallic compounds can be simultaneously optimized. The subsize scale was also found to enhance the stability of the membrane electrode through preventing the poisoning of catalysts by ionomers in humid fuel-cell conditions. We anticipate that subsize Pt-based intermetallic compounds set a good example for the rational design of high-performance oxygen reduction electrocatalysts for PEMFCs. Furthermore, the prevention of ionomer poisoning was identified as the critical parameter for assembling robust commercial membrane electrodes in PEMFCs.
RESUMO
Tuning the electroactive surface species of electrocatalysts remains a significant challenge for achieving highly efficient oxygen evolution reactions. Herein, we propose an innovative in situ leaching strategy, modulated by cationic oxidation, to achieve active self-reconstruction of these catalysts. Vanadium is introduced as a cation into Ni3S2 and oxidized under low oxidative potential, leading to subsequent leaching into the electrolyte and triggering self-reconstruction. The structural evolution from V-Ni3S2 to Ni(OH)2 and subsequently to NiOOH is identified by operando Raman as a three-step transition. In contrast, V-free Ni3S2 is unable to bypass the thermodynamically predicted nickel oxysulfide products to transform into active NiOOH. As a result, the self-restructured V-Ni3S2 only needs an ultralow overpotential of 155 mV at 10 mA cm-2, outperforming V-free Ni3S2 and many other advanced catalysts. This work provides new guidelines for manipulating in situ leaching to modulate the self-reconstruction of catalysts.
RESUMO
Cation exchange (CE) in metal oxides under mild conditions remains an imperative yet challenging goal to tailor their composition and enable practical applications. Herein, we first develop an amorphization-induced strategy to achieve room-temperature CE for universally synthesizing single-atom doped In2O3 nanosheets (NSs). Density functional theory (DFT) calculations elucidate that the abundant coordination-unsaturated sites present in a-In2O3 NSs are instrumental in surmounting the energy barriers of CE reactions. Empirically, a-In2O3 NSs as the host materials successfully undergo exchange with unary cations (Cu2+, Co2+, Mn2+, Ni2+), binary cations (Co2+Mn2+, Co2+Ni2+, Mn2+Ni2+), and ternary cations (Co2+Mn2+Ni2+). Impressively, high-loading single-atom doped (over 10 atom %) In2O3 NSs were obtained. Additionally, Cu/a-In2O3 NSs exhibit an excellent ethanol yield (798.7 µmol g-1 h-1) with a high selectivity of 99.5% for the CO2 photoreduction. This work offers a new approach to induce CE reactions in metal oxides under mild conditions and constructs scalable single-atom doped catalysts for critical applications.
RESUMO
Strain engineering is an attractive strategy for improving the intrinsic catalytic performance of heterogeneous catalysts. Manipulating strain on the short-range atomic scale to the local structure of the catalytic sites is still challenging. Herein, we successfully achieved atomic strain modulation on ultrathin layered vanadium oxide nanoribbons by an ingenious intercalation chemistry method. When trace sodium cations were introduced between the V2O5 layers (Na+-V2O5), the V-O bonds were stretched by the atomically strained vanadium sites, redistributing the local charges. The Na+-V2O5 demonstrated excellent photooxidation performance, which was approximately 12 and 14 times higher than that of pristine V2O5 and VO2, respectively. Complementary spectroscopy analysis and theoretical calculations confirmed that the atomically strained Na+-V2O5 had a high surficial charge density, improving the activation of oxygen molecules and contributing to the excellent photocatalytic property. This work provides a new approach for the rational design of strain-equipped catalysts for selective photooxidation reactions.
RESUMO
Consuming one of the largest amount of electricity, the chlor-alkali industry supplies basic chemicals for society, which mainly consists of two reactions, hydrogen evolution (HER) and chlorine evolution reaction (CER). Till now, the state-of-the-art catalyst applied in this field is still the dimensional stable anode (DSA), which consumes a large amount of noble metal of Ru and Ir. It is thus necessary to develop new types of catalysts. In this study, an organocatalyst anchored on the single-atom support (SAS) is put forward. It exhibits high catalytic efficiency towards both HER and CER with an overpotential of 21â mV and 20â mV at 10â mA cm-2 . With this catalyst on both electrodes, the energy consumption is cut down by 1.2 % compared with the commercial system under industrial conditions. Based on this novel catalyst and the high activity, the mechanism of modifying non-covalent interaction is demonstrated to be reliable for the catalyst's design. This work not only provides efficient catalysts for the chlor-alkali industry but also points out that the SACs can also act as support, providing new twists for the development of SACs and organic molecules in the next step.
RESUMO
Directly coupling N2 and CO2 to synthesize urea by photocatalysis paves a sustainable route for urea synthesis, but its performance is limited by the competition of photogenerated electrons between N2 and CO2, as well as the underutilized photogenerated holes. Herein, we report an efficient urea synthesis process involving photogenerated electrons and holes in respectively converting CO2 and N2 over a redox heterojunction consisting of WO3 and Ni single-atom-decorated CdS (Ni1-CdS/WO3). For the photocatalytic urea synthesis from N2 and CO2 in pure water, Ni1-CdS/WO3 attained a urea yield rate of 78â µM h-1 and an apparent quantum yield of 0.15 % at 385â nm, which ranked among the best photocatalytic urea synthesis performance reported. Mechanistic studies reveal that the N2 was converted into NO species by â OH radicals generated from photogenerated holes over the WO3 component, meanwhile, the CO2 was transformed into *CO species over the Ni site by photogenerated electrons. The generated NO and *CO species were further coupled to form *OCNO intermediate, then gradually transformed into urea. This work emphasizes the importance of reasonably utilizing photogenerated holes in photocatalytic reduction reactions.
RESUMO
Development of efficient and easy-to-prepare low-cost oxygen reaction electrocatalysts is essential for widespread application of rechargeable Zn-air batteries (ZABs). Herein, we mixed NaCl and ZIF-8 by simple physical milling and pyrolysis to obtain a metal-free porous electrocatalyst doped with Cl (mf-pClNC). The mf-pClNC electrocatalyst exhibits a good oxygen reduction reaction (ORR) activity (E1/2 =0.91â V vs. RHE) and high stability in alkaline electrolyte, exceeding most of the reported transition metal carbon-based electrocatalysts and being comparable to commercial Pt/C electrocatalysts. Likewise, the mf-pClNC electrocatalyst also shows state-of-the-art ORR activity and stability in acidic electrolyte. From experimental and theoretical calculations, the better ORR activity is most likely originated from the fact that the introduced Cl promotes the increase of sp3 -hybridized carbon, while the sp3 -hybridized carbon and Cl together modify the electronic structure of the N-adjacent carbons, as the active sites, while NaCl molten-salt etching provides abundant paths for the transport of electrons/protons. Furthermore, the liquid rechargeable ZAB using the mf-pClNC electrocatalyst as the cathode shows a fulfilling performance with a peak power density of 276.88â mW cm-2 . Flexible quasi-solid-state rechargeable ZAB constructed with the mf-pClNC electrocatalyst as the cathode exhibits an exciting performance both at low, high and room temperatures.
RESUMO
Strong metal-support interaction (SMSI) is crucial to modulating the nature of metal species, yet the SMSI behaviors of sub-nanometer metal clusters remain unknown due to the difficulties in constructing SMSI at cluster scale. Herein, we achieve the successful construction of the SMSI between Pt clusters and amorphous TiO2 nanosheets by vacuum annealing, which requires a relatively low temperature that avoids the aggregation of small clusters. In situ scanning transmission electron microscopy observation is employed to explore the SMSI behaviors, and the results reveal the dynamic rearrangement of Pt atoms upon annealing for the first time. The originally disordered Pt atoms become ordered as the crystallizing of the amorphous TiO2 support, forming an epitaxial interface between Pt and TiO2. Such a SMSI state can remain stable in oxidation environment even at 400 °C. Further investigations prove that the electron transfer from TiO2 to Pt occupies the Pt 5d orbitals, which is responsible for the disappeared CO adsorption ability of Pt/TiO2 after forming SMSI. This work not only opens a new avenue for constructing SMSI at cluster scale but also provides in-depth understanding on the unique SMSI behavior, which would stimulate the development of supported metal clusters for catalysis applications.
RESUMO
The zinc-iodine aqueous battery is a promising energy storage device, but the conventional two-electron reaction potential and energy density of the iodine cathode are far from meeting practical application requirements. Given that iodine is rich in redox reactions, activating the high-valence iodine cathode reaction has become a promising research direction for developing high-voltage zinc-iodine batteries. In this work, by designing a multifunctional electrolyte additive trimethylamine hydrochloride (TAH), a stable high-valence iodine cathode in four-electron-transfer I-/I2/I+ reactions with a high theoretical specific capacity is achieved through a unique amine group, Cl bidentate coordination structure of (TA)ICl. Characterization techniques such as synchrotron radiation, in-situ Raman spectra, and DFT calculations are used to verify the mechanism of the stable bidentate structure. This electrolyte additive stabilizes the zinc anode by promoting the desolvation process and shielding mechanism, enabling the zinc anode to cycle steadily at a maximum areal capacity of 57 mAh cm-2 with 97% zinc utilization rate. Finally, the four-electron-transfer aqueous Zn-I2 full cell achieves 5000 stable cycles at an N/P ratio of 2.5. The unique bidentate coordination structure contributes to the further development of high-valence and high capacity aqueous zinc-iodine batteries.
RESUMO
Spiral two-dimensional (2D) nanosheets exhibit unique physical and chemical phenomena due to their twisted structures. While self-assembly of clusters is an ideal strategy to form hierarchical 2D structures, it is challenging to form spiral nanosheets. Herein, we first report a screw dislocation involved assembled method to obtain 2D spiral cluster assembled nanosheets (CANs) with uniform square morphology. The 2D spiral Ru CANs with a length of approximately 4 µm and thickness of 20.7 ± 3.0 nm per layer were prepared via the assembly of 1-2 nm Ru clusters in the presence of molten block copolymer Pluronic F127. Cryo-electron microscopy (cryo-EM) and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) demonstrate the existence of screw dislocation in the spiral assembled structure. The X-ray absorption fine structure spectrum indicates that Ru clusters are Ru3+ species, and Ru atoms are mainly coordinated with Cl with a coordination number of 6.5. Fourier-transform infrared (FT-IR) spectra and solid-state nuclear magnetic resonance hydrogen spectra (1H NMR) indicate that the assembly process of Ru clusters is formed by noncovalent interactions, including hydrogen bonding and hydrophilic interactions. Additionally, the Ru-F127 CANs exhibit excellent photothermal conversion performance in the near-infrared (NIR) region.
RESUMO
Mixed plastic waste treatment has long been a significant challenge due to complex composition and sorting costs. In this study, we have achieved a breakthrough in converting mixed plastic wastes into a single chemical product using our innovative single-atom catalysts for the first time. The single-atom Ru catalyst can convert â¼90% of real mixed plastic wastes into methane products (selectivity >99%). The unique electronic structure of Ru sites regulates the adsorption energy of mixed plastic intermediates, leading to rapid decomposition of mixed plastics and superior cycle stability compared to traditional nanocatalysts. The global warming potential of the entire process was evaluated. Our proposed carbon-reducing process utilizing single-atom catalysts launches a new era of mixed plastic waste valorization.
RESUMO
An efficient catalytic system for nitrogen (N2) photofixation generally consists of light-harvesting units, active sites, and an electron-transfer bridge. In order to track photogenerated electron flow between different functional units, it is highly desired to develop in situ characterization techniques with element-specific capability, surface sensitivity, and detection of unoccupied states. In this work, we developed in situ synchrotron radiation soft X-ray absorption spectroscopy (in situ sXAS) to probe the variation of electronic structure for a reaction system during N2 photoreduction. Nickel single-atom and ceria nanoparticle comodified reduced graphene oxide (CeO2/Ni-G) was designed as a model catalyst. In situ sXAS directly reveals the dynamic interfacial charge transfer of photogenerated electrons under illumination and the consequent charge accumulation at the catalytic active sites for N2 activation. This work provides a powerful tool to monitor the electronic structure evolution of active sites under reaction conditions for photocatalysis and beyond.
RESUMO
Charge redistribution on surface of Ru nanoparticle can significantly affect electrocatalytic HER activity. Herein, a double atomic-tuned RuBi SAA/Bi@OG nanostructure that features RuBi single-atom alloy nanoparticle supported by Bi-O single-site-doped graphene was successfully developed by one-step pyrolysis method. The alloyed Bi single atom and adjacent Bi-O single site in RuBi SAA/Bi@OG can synergistically manipulate electron transfer on Ru surface leading to optimum charge redistribution. Thus, the resulting RuBi SAA/Bi@OG exhibits superior alkaline HER activity. Its mass activity is up to 65000â mA mg-1 at an overpotential of 150â mV, which is 72.2â times as much as that of commercial Pt/C. DFT calculations reveal that the RuBi SAA/Bi@OG possesses the optimum charge redistribution, which is most beneficial to strengthen adsorption of water and weaken hydrogen-adsorption free energy in HER process. This double atomic-tuned strategy on surface charge redistribution of Ru nanoparticle opens a new way to develop highly efficient electrocatalysts.
RESUMO
Alkaline fuel cells can permit the adoption of platinum group metal-free (PGM-free) catalysts and cheap bipolar plates, thus further lowering the cost. With the exploration of PGM-free hydrogen oxidation reaction (HOR) catalysts, nickel-based compounds have been considered as the most promising HOR catalysts in alkali. Here we report an interfacial engineering through the formation of nickel-vanadium oxide (Ni/V2 O3 ) heterostructures to activate Ni for efficient HOR catalysis in alkali. The strong electron transfer from Ni to V2 O3 could modulate the electronic structure of Ni sites. The optimal Ni/V2 O3 catalyst exhibits a high intrinsic activity of 0.038â mA cm-2 and outstanding stability. Experimental and theoretical studies reveal that Ni/V2 O3 interface as the active sites can enable to optimize the hydrogen and hydroxyl bindings, as well as protect metallic Ni from extensive oxidation, thus achieving the notable activity and durability.