Preoxidation and Prilling Combined with Doping Strategy to Build High-Performance Recycling Spent LiFePO4 Materials.

Direct regeneration has gained much attention in LiFePO4 battery recycling due to its simplicity, ecofriendliness, and cost savings. However, the excess carbon residues from binder decomposition, conductive carbon, and coated carbon in spent LiFePO4 impair electrochemical performance of direct regenerated LiFePO4. Herein, we report a preoxidation and prilling collaborative doping strategy to restore spent LiFePO4 by direct regeneration. The excess carbon is effectively removed by preoxidation. At the same time, prilling not only reduces the size of the primary particles and shortens the diffusion distance of Li+ but also improves the tap density of the regenerated materials. Besides, the Li+ transmission of the regenerated LiFePO4 is further improved by Ti4+ doping. Compared with commercial LiFePO4, it has excellent low-temperature performance. The collaborative strategy provides a new insight into regenerating high-performance spent LiFePO4.

Construction of a Preoxidation and Cation Doping Regeneration Strategy to Improve Rate Performance Recycling Spent LiFePO4 Materials.

Efficient recycling of spent lithium-ion batteries (LIBs) is significant for solving environmental problems and promoting resource conservation. Economical recycling of LiFePO4 (LFP) batteries is extremely challenging due to the inexpensive production of LFP. Herein, we report a preoxidation combine with cation doping regeneration strategy to regenerate spent LiFePO4 (SLFP) with severely deteriorated. The binder, conductive agent, and residual carbon in SLFP are effectively removed through preoxidation treatment, which lays the foundation for the uniform and stable regeneration of LFP. Mg2+ doping is adopted to promote the diffusion efficiency of lithium ions, reduces the charge-transfer impedance, and further improves the electrochemical performance of the regenerated LFP. The discharge capacity of SLFP with severe deterioration recovers successfully from 43.2 to 136.9 mA h g-1 at 0.5 C. Compared with traditional methods, this technology is simple, economical, and environment-friendly. It provided an efficient way for recycling SLFP materials.

Tuning Electrochemical Performance of Li-Rich Layered Cathode Materials with a Solid Phase Fusion Strategy.

Li-rich layered cathode materials (LRMs) have attracted extensive attention because of their high theoretical specific capacity. However, their practical application is limited by the severe depreciation of capacity and voltage during cycling. Herein, high electrical conductivity MoS2 is constructed on Li1.2Ni0.2Mn0.6O2 (LLNM) surface through solid phase fusion technology (SFT). Extraordinarily, the MoS2 modified layer lessens the interface side reaction and stabilizes the surface structure of LLNM. Meanwhile, the strong electron conductivity of MoS2 speeds up electron transit at the surface. The results demonstrate that LLNM-M10 exhibits a remarkable electrochemical performance as it retains 183.3 mA h g-1 at 1 C after 250 cycles. More crucially, the modified electrode exhibits an exceptional low-temperature performance of 120.3 mA h g-1 at 0.1 C and -10 °C. Therefore, this presented strategy may provide a new method for further application of Li-rich layered cathode materials.