Selenium-SelK-GPX4 axis protects nucleus pulposus cells against mechanical overloading-induced ferroptosis and attenuates senescence of intervertebral disc.

Intervertebral disc degeneration (IVDD) is one of the most prevalent spinal degenerative disorders and imposes places heavy medical and economic burdens on individuals and society. Mechanical overloading applied to the intervertebral disc (IVD) has been widely recognized as an important cause of IVDD. Mechanical overloading-induced chondrocyte ferroptosis was reported, but the potential association between ferroptosis and mechanical overloading remains to be illustrated in nucleus pulposus (NP) cells. In this study, we discovered that excessive mechanical loading induced ferroptosis and endoplasmic reticulum (ER) stress, which were detected by mitochondria and associated markers, by increasing the intracellular free Ca2+ level through the Piezo1 ion channel localized on the plasma membrane and ER membrane in NP cells. Besides, we proposed that intracellular free Ca2+ level elevation and the activation of ER stress are positive feedback processes that promote each other, consistent with the results that the level of ER stress in coccygeal discs of aged Piezo1-CKO mice were significantly lower than that of aged WT mice. Then, we confirmed that selenium supplementation decreased intracellular free Ca2+ level by mitigating ER stress through upregulating Selenoprotein K (SelK) expression. Besides, ferroptosis caused by the impaired production and function of Glutathione peroxidase 4 (GPX4) due to mechanical overloading-induced calcium overload could be improved by selenium supplementation through Se-GPX4 axis and Se-SelK axis in vivo and in vitro, eventually presenting the stabilization of the extracellular matrix (ECM). Our findings reveal the important role of ferroptosis in mechanical overloading-induced IVDD, and selenium supplementation promotes significance to attenuate ferroptosis and thus alleviates IVDD, which might provide insights into potential therapeutic interventions for IVDD.

Inferior Interfacial Superconductivity in 1 UC FeSe/SrVO3/SrTiO3 with Screened Interfacial Electron-Phonon Coupling.

Single-unit cell (1 UC) FeSe interfaced with TiOx or FeOx exhibits significantly enhanced superconductivity compared to that of bulk FeSe, with interfacial electron-phonon coupling (EPC) playing a crucial role. However, the reduced dimensionality in 1 UC FeSe, which may drive superconducting fluctuations, complicates our understanding of the enhancement mechanisms. We construct a new superconducting interface, 1 UC FeSe/SrVO3/SrTiO3. Here, the itinerant electrons of highly metallic SrVO3 films can screen all high-energy Fuchs-Kliewer phonons, including those of SrTiO3, making it the first FeSe/oxide system with screened interfacial EPC while maintaining the 1 UC FeSe thickness. Despite comparable doping levels, the heavily electron-doped 1 UC FeSe/SrVO3 exhibits a pairing temperature (Tg ∼ 48 K) lower than those of FeSe/SrTiO3 and FeSe/LaFeO3. Our findings disentangle the contributions of interfacial EPC from dimensionality in terms of enhancing Tg in FeSe/oxide interfaces, underscoring the critical importance of interfacial EPC. This FeSe/VOx interface also provides a platform for studying interfacial superconductivity.

Study on the Relationship between sLOX-1, S100A12, D-dimer, and Cerebral Hemorrhage Transformation after Intravenous Thrombolysis in Stroke.

Objective: This study examines the relationship between serum biomarkers sLOX-1, S100A12, D-dimer and the risk of cerebral hemorrhage transformation following intravenous thrombolysis in stroke patients. Methods: We retrospectively analyzed 161 stroke patients who underwent intravenous thrombolysis at our hospital from March 2021 to March 2023. Patients were categorized into hemorrhagic transformation (n=35) and non-hemorrhagic transformation groups (n=126) based on head CT scans conducted within 3 days post-treatment. We compared serum levels of sLOX-1, S100A12, and D-dimer between the groups and analyzed clinical data to evaluate factors influencing hemorrhagic transformation. Results: No significant differences were found in demographics, medical history, or stroke characteristics between the groups (P > .05). The hemorrhagic transformation group exhibited higher NIHSS scores, WBC levels, and lower UA levels (P < .05). Notably, sLOX-1, S100A12, and D-dimer levels were significantly elevated in the hemorrhagic group (P < .05). Multivariate regression and ROC curve analyses indicated these biomarkers and NIHSS scores significantly predict cerebral hemorrhage post-thrombolysis (P < .05). Conclusion: Elevated sLOX-1, S100A12, and D-dimer levels are associated with an increased risk of cerebral hemorrhage transformation after thrombolysis in stroke patients. These biomarkers along with NIHSS and NIHSS scores, hold diagnostic value for predicting hemorrhagic outcomes.

Direct Observation of Topological Phonons in Graphene.

Phonons, as the most fundamental emergent bosons in condensed matter systems, play an essential role in the thermal, mechanical, and electronic properties of crystalline materials. Recently, the concept of topology has been introduced to phonon systems, and the nontrivial topological states also exist in phonons due to the constraint by the crystal symmetry of the space group. Although the classification of various topological phonons has been enriched theoretically, experimental studies were limited to several three-dimensional (3D) single crystals with inelastic x-ray or neutron scatterings. The experimental evidence of topological phonons in two-dimensional (2D) materials is absent. Here, using high-resolution electron energy loss spectroscopy following our theoretical predictions, we directly map out the phonon spectra of the atomically thin graphene in the entire 2D Brillouin zone, and observe two nodal-ring phonons and four Dirac phonons. The closed loops of nodal-ring phonons and the conical structure of Dirac phonons in 2D momentum space are clearly revealed by our measurements, in nice agreement with our theoretical calculations. The ability of 3D mapping (2D momentum space and energy space) of phonon spectra opens up a new avenue to the systematic identification of the topological phononic states. Our work lays a solid foundation for potential applications of topological phonons in superconductivity, dynamic instability, and phonon diode.

Dramatic Plasmon Response to the Charge-Density-Wave Gap Development in 1T-TiSe_{2}.

1T-TiSe_{2} is one of the most studied charge density wave (CDW) systems, not only because of its peculiar properties related to the CDW transition, but also due to its status as a promising candidate of exciton insulator signaled by the proposed plasmon softening at the CDW wave vector. Using high-resolution electron energy loss spectroscopy, we report a systematic study of the temperature-dependent plasmon behaviors of 1T-TiSe_{2}. We unambiguously resolve the plasmon from phonon modes, revealing the existence of Landau damping to the plasmon at finite momentums, which does not support the plasmon softening picture for exciton condensation. Moreover, we discover that the plasmon lifetime at zero momentum responds dramatically to the band gap evolution associated with the CDW transition. The interband transitions near the Fermi energy in the normal phase are demonstrated to serve as a strong damping channel of plasmons, while such a channel in the CDW phase is suppressed due to the CDW gap opening, which results in the dramatic tunability of the plasmon in semimetals or small-gap semiconductors.

The monocyte to high-density lipoprotein cholesterol ratio is a risk factor for frequent premature ventricular complexes: a retrospective cohort study.

BACKGROUND: Little is known about the link between the monocyte to high-density lipoprotein cholesterol ratio (MHR) and frequent premature ventricular complexes (PVCs). This investigation aimed to evaluate the link between the MHR and frequent PVCs in patients, as well as their outcomes, using the axis, burden, coupling interval-ventricular tachycardia (ABC-VT) risk score (ARS). METHODS: Two hundred patients with frequent PVCs and 70 controls were retrospectively enrolled, and their general data were gathered. The MHR and ARS were calculated. Then, patients developing frequent PVCs were classified into a medium-/high-risk subgroup and a low-risk subgroup according to ARS. The results were evaluated employing comparative statistical analyses, Spearman's correlation, logistic regression analyses, and receiver operating characteristic (ROC) curves. RESULTS: The MHR in the controls was obviously lower than that in the frequent PVC group. In addition, the MHR was the lowest in the control group and highest in the medium-/high-risk subgroup, with that of the low-risk subgroup falling in the middle. Spearman's correlation analyses showed that the MHR was positively correlated with the ARS (ρ = 0.307, P < 0.001). Ultimately, the MHR was found to be a risk factor for frequent PVCs in the multivariate analysis. In addition, an MHR cutoff point of 254.6 featured 67.50% sensitivity and 67.14% specificity for predicting frequent PVCs, and the area under the curve (AUC) reached 0.694 (95% confidence interval: 0.623-0.766) (P < 0.001). CONCLUSIONS: The MHR is positively and independently correlated with frequent PVCs and can be used as a practical, cost-saving and simple biomarker of inflammation owing to its value in predicting frequent PVCs. In addition, the MHR is crucial to risk stratification and prognosis, which may give it clinical value in the prevention and management of frequent PVCs.

Observation of Nodal-Line Plasmons in ZrSiS.

Nodal-line semimetals (NLSMs), a large family of new topological phases of matter with continuous linear band crossing points in the momentum space, attract considerable attention. Here, we report the direct observation of plasmons originating from topological nodal-line states in a prototypical NLSM ZrSiS by high-resolution electron energy loss spectroscopy. There exist three temperature-independent plasmons with energies ranging from the near- to the mid-infrared frequencies. With first-principles calculations of a slab model, these plasmons can be ascribed to the correlations of electrons in the bulk nodal lines and their projected surface states, dubbed nodal-line plasmons. An anomalous surface plasmon has higher excitation energy than the bulk plasmon due to the larger contribution from the nodal-line projected surface states. This work reveals the novel plasmons related to the unique nodal-line states in a NLSM.

Enhanced Superconducting State in FeSe/SrTiO_{3} by a Dynamic Interfacial Polaron Mechanism.

The observation of substantially enhanced superconductivity of single-layer FeSe films on SrTiO_{3} has stimulated intensive research interest. At present, conclusive experimental data on the corresponding electron-boson interaction is still missing. Here we use inelastic electron scattering spectroscopy and angle resolved photoemission spectroscopy to show that the electrons in these systems are dressed by the strongly polarized lattice distortions of the SrTiO_{3}, and the indispensable nonadiabatic nature of such a coupling leads to the formation of dynamic interfacial polarons. Furthermore, the collective motion of the polarons results in a polaronic plasmon mode, which is unambiguously correlated with the surface phonons of SrTiO_{3} in the presence of the FeSe films. A microscopic model is developed showing that the interfacial polaron-polaron interaction leads to the superconductivity enhancement.

Classification of charge density waves based on their nature.

The concept of a charge density wave (CDW) permeates much of condensed matter physics and chemistry. CDWs have their origin rooted in the instability of a one-dimensional system described by Peierls. The extension of this concept to reduced dimensional systems has led to the concept of Fermi surface nesting (FSN), which dictates the wave vector [Formula: see text] of the CDW and the corresponding lattice distortion. The idea is that segments of the Fermi contours are connected by [Formula: see text], resulting in the effective screening of phonons inducing Kohn anomalies in their dispersion at [Formula: see text], driving a lattice restructuring at low temperatures. There is growing theoretical and experimental evidence that this picture fails in many real systems and in fact it is the momentum dependence of the electron-phonon coupling (EPC) matrix element that determines the characteristic of the CDW phase. Based on the published results for the prototypical CDW system 2H-NbSe2, we show how well the [Formula: see text]-dependent EPC matrix element, but not the FSN, can describe the origin of the CDW. We further demonstrate a procedure of combing electronic band and phonon measurements to extract the EPC matrix element, allowing the electronic states involved in the EPC to be identified. Thus, we show that a large EPC does not necessarily induce the CDW phase, with Bi2Sr2CaCu2O8+δ as the example, and the charge-ordered phenomena observed in various cuprates are not driven by FSN or EPC. To experimentally resolve the microscopic picture of EPC will lead to a fundamental change in the way we think about, write about, and classify charge density waves.

Anomalous Acoustic Plasmon Mode from Topologically Protected States.

Plasmons, the collective excitations of electrons in the bulk or at the surface, play an important role in the properties of materials, and have generated the field of "plasmonics." We report the observation of a highly unusual acoustic plasmon mode on the surface of a three-dimensional topological insulator (TI) Bi_{2}Se_{3}, using momentum resolved inelastic electron scattering. In sharp contrast to ordinary plasmon modes, this mode exhibits almost linear dispersion into the second Brillouin zone and remains prominent with remarkably weak damping not seen in any other systems. This behavior must be associated with the inherent robustness of the electrons in the TI surface state, so that not only the surface Dirac states but also their collective excitations are topologically protected. On the other hand, this mode has much smaller energy dispersion than expected from a continuous media excitation picture, which can be attributed to the strong coupling with surface phonons.

Oxygen-Assisted Chemical Vapor Deposition Growth of Large Single-Crystal and High-Quality Monolayer MoS2.

Monolayer molybdenum disulfide (MoS2) has attracted great interest due to its potential applications in electronics and optoelectronics. Ideally, single-crystal growth over a large area is necessary to preserve its intrinsic figure of merit but is very challenging to achieve. Here, we report an oxygen-assisted chemical vapor deposition method for growth of single-crystal monolayer MoS2. We found that the growth of MoS2 domains can be greatly improved by introducing a small amount of oxygen into the growth environment. Triangular monolayer MoS2 domains can be achieved with sizes up to ∼350 µm and a room-temperature mobility up to ∼90 cm(2)/(V·s) on SiO2. The role of oxygen is not only to effectively prevent the poisoning of precursors but also to eliminate defects during the growth. Our work provides an advanced method for high-quality single-crystal monolayer MoS2 growth.

Observation of the nonanalytic behavior of optical phonons in monolayer hexagonal boron nitride.

Phonon splitting of the longitudinal and transverse optical modes (LO-TO splitting), a ubiquitous phenomenon in three-dimensional polar materials, will break down in two-dimensional (2D) polar systems. Theoretical predictions propose that the LO phonon in 2D polar monolayers becomes degenerate with the TO phonon, displaying a distinctive "V-shaped" nonanalytic behavior near the center of the Brillouin zone. However, the full experimental verification of these nonanalytic behaviors has been lacking. Here, using monolayer hexagonal boron nitride (h-BN) as a prototypical example, we report the comprehensive and direct experimental verification of the nonanalytic behavior of LO phonons by inelastic electron scattering spectroscopy. Interestingly, the slope of the LO phonon in our measurements is lower than the theoretically predicted value for a freestanding monolayer due to the screening of the Cu foil substrate. This enables the phonon polaritons in monolayer h-BN/Cu foil to exhibit ultra-slow group velocity (~5 × 10-6 c, c is the speed of light) and ultra-high confinement (~ 4000 times smaller wavelength than that of light). These exotic behaviors of the optical phonons in h-BN presents promising prospects for future optoelectronic applications.

Fully Automatic Deep Learning Model for Spine Refracture in Patients with OVCF: A Multi-Center Study.

BACKGROUND: The reaserch of artificial intelligence (AI) model for predicting spinal refracture is limited to bone mineral density, X-ray and some conventional laboratory indicators, which has its own limitations. Besides, it lacks specific indicators related to osteoporosis and imaging factors that can better reflect bone quality, such as computed tomography (CT). OBJECTIVE: To construct a novel predicting model based on bone turn-over markers and CT to identify patients who were more inclined to suffer spine refracture. METHODS: CT images and clinical information of 383 patients (training set = 240 cases of osteoporotic vertebral compression fractures (OVCF), validation set = 63, test set = 80) were retrospectively collected from January 2015 to October 2022 at three medical centers. The U-net model was adopted to automatically segment ROI. Three-dimensional (3D) cropping of all spine regions was used to achieve the final ROI regions including 3D_Full and 3D_RoiOnly. We used the Densenet 121-3D model to model the cropped region and simultaneously build a T-NIPT prediction model. Diagnostics of deep learning models were assessed by constructing ROC curves. We generated calibration curves to assess the calibration performance. Additionally, decision curve analysis (DCA) was used to assess the clinical utility of the predictive models. RESULTS: The performance of the test model is comparable to its performance on the training set (dice coefficients of 0.798, an mIOU of 0.755, an SA of 0.767, and an OS of 0.017). Univariable and multivariable analysis indicate that T_P1NT was an independent risk factor for refracture. The performance of predicting refractures in different ROI regions showed that 3D_Full model exhibits the highest calibration performance, with a Hosmer-Lemeshow goodness-of-fit (HL) test statistic exceeding 0.05. The analysis of the training and test sets showed that the 3D_Full model, which integrates clinical and deep learning results, demonstrated superior performance with significant improvement (p-value < 0.05) compared to using clinical features independently or using only 3D_RoiOnly. CONCLUSION: T_P1NT was an independent risk factor of refracture. Our 3D-FULL model showed better performance in predicting high-risk population of spine refracture than other models and junior doctors do. This model can be applicable to real-world translation due to its automatic segmentation and detection.

Atomic-scale observation of localized phonons at FeSe/SrTiO3 interface.

In single unit-cell FeSe grown on SrTiO3, the superconductivity transition temperature features a significant enhancement. Local phonon modes at the interface associated with electron-phonon coupling may play an important role in the interface-induced enhancement. However, such phonon modes have eluded direct experimental observations. The complicated atomic structure of the interface brings challenges to obtain the accurate structure-phonon relation knowledge. Here, we achieve direct characterizations of atomic structure and phonon modes at the FeSe/SrTiO3 interface with atomically resolved imaging and electron energy loss spectroscopy in an electron microscope. We find several phonon modes highly localized (~1.3 nm) at the unique double layer Ti-O terminated interface, one of which (~ 83 meV) engages in strong interactions with the electrons in FeSe based on ab initio calculations. This finding of the localized interfacial phonon associated with strong electron-phonon coupling provides new insights into understanding the origin of superconductivity enhancement at the FeSe/SrTiO3 interface.

Computational modeling of the cephalic arch with jugulocephalic vein variant predicts hemodynamic profiles in patients with brachiocephalic fistula.

BACKGROUND: The cephalic vein is often used in for arteriovenous fistula creation; however, the cephalic vein variation is common. This study will propose new theoretical explanations for a new discovered variation of cephalic vein draining into external jugular vein with "T-junction" shape by means of 3D computational hemodynamic modeling, which may provide reference for clinical practice. METHODS: The precise measurements were conducted for the variant right cephalic vein draining into external jugular vein and for a normal right cephalic vein as a control. After processing the anatomical data, 3D geometrical model was reconstructed. Then, the influent field inside the variant jugulocephalic vein was mathematically modeled to get a detailed description of hemodynamic environment. RESULTS: The anatomical parameters of the "T-junction" jugulocephalic vein variant were much more different from the normal right cephalic vein. The wall shear stress of variant cephalic vein at the corresponding position was higher and changed more rapidly than that of normal cephalic vein. The shear rate contour lines are disordered in several areas of the variant cephalic vein, indicating that the hemodynamic parameters in these areas are unstable. The hemodynamic characteristics at the confluence of the variant cephalic vein are more complex, with more areas where hemodynamic parameters are disrupted. CONCLUSIONS: The variation of cephalic arch in a "T-junction" with external jugular vein largely altered the fluid dynamics, especially in hemodialysis patients with brachiocephalic fistula in terms of the simulating flow in 3D computational model. This computational model provides hemodynamic profiles for stabilizing or modulating fluid dynamics in patients with jugulocephalic vein variant after brachiocephalic fistula.

Coherent Phonon-Induced Gigahertz Optical Birefringence and Its Manipulation in SrTiO3.

Birefringence, which modulates the polarization of electromagnetic wave, has been commercially developed and widely used in modern photonics. Fostered by high-frequency signal processing and communications, feasible birefringence technologies operating in gigahertz (GHz) range are highly desired. Here, a coherent phonon-induced GHz optical birefringence and its manipulation in SrTiO3 (STO) crystals are demonsrated. With ultrafast laser pumping, the coherent acoustic phonons with low damping are created in the transducer/STO structures. A series of transducer layers are examined and the optimized one with relatively high photon-phonon conversion efficiency, i.e., semiconducting LaRhO3 film, is obtained. The most intriguing finding here is that, by virtue of high sensitivity to strain perturbation of STO, GHz optical birefringence can be induced by the coherent acoustic phonons and the birefringent amplitudes possess crystal orientation dependence. Optical manipulation of both coherent phonons and its induced GHz birefringence by double pump technique are also realized. These findings reveal an alternative mechanism of ultrafast optical birefringence control, and offer prospects for applications in high-frequency acoustic-optics devices.

Electron-phonon coupling on the surface of the topological insulator Bi2Se3 determined from surface-phonon dispersion measurements.

In this Letter, we report measurements of the coupling between Dirac fermion quasiparticles (DFQs) and phonons on the (001) surface of the strong topological insulator Bi2Se3. While most contemporary investigations of this coupling have involved examining the temperature dependence of the DFQ self-energy via angle-resolved photoemission spectroscopy measurements, we employ inelastic helium-atom scattering to explore, for the first time, this coupling from the phonon perspective. Using a Hilbert transform, we are able to obtain the imaginary part of the phonon self-energy associated with a dispersive surface-phonon branch identified in our previous work [Phys. Rev. Lett. 107, 186102 (2011)] as having strong interactions with the DFQs. From this imaginary part of the self-energy we obtain a branch-specific electron-phonon coupling constant of 0.43, which is stronger than the values reported from the angle-resolved photoemission spectroscopy measurements.

Interaction of phonons and dirac fermions on the surface of Bi2Se3: a strong Kohn anomaly.

We report the first measurements of phonon dispersion curves on the (001) surface of the strong three-dimensional topological insulator Bi2Se3. The surface phonon measurements were carried out with the aid of coherent helium beam surface scattering techniques. The results reveal a prominent signature of the exotic metallic Dirac fermion quasiparticles, including a strong Kohn anomaly. The signature is manifest in a low energy isotropic convex dispersive surface phonon branch with a frequency maximum of 1.8 THz and having a V-shaped minimum at approximately 2kF that defines the Kohn anomaly. Theoretical analysis attributes this dispersive profile to the renormalization of the surface phonon excitations by the surface Dirac fermions. The contribution of the Dirac fermions to this renormalization is derived in terms of a Coulomb-type perturbation model.

Synthesis of zero-valent iron/biochar by carbothermal reduction from wood waste and iron mud for removing rhodamine B.

This study proposes a new process to synthesize zero-valent iron/biochar (Fe0-BC) by carbothermal reduction using wood waste and iron mud as raw materials under different temperature. The characterization results showed that the Fe0-BC synthesized at 1200 °C (Fe0-BC-1200) possessed favorable adsorption capacity with the specific surface area of 103.18 m2/g and that the zero-valent iron (Fe0) particles were uniformly dispersed on the biochar surface. The removal efficiency of rhodamine B (RB) was determined to evaluate the performance of the prepared Fe0-BC. Fe0-BC-1200 presented the best performance on RB removal, which mainly ascribes to that more Fe0 particles generated at higher temperature. The equilibrium adsorption capacity reached 49.93 mg/g when the initial RB concentration and the Fe0-BC-1200 dosage were 100 mg/L and 2 g/L, respectively, and the pseudo-second-order model was suitable to fit the removal experimental data. LCMC and XRD analyses revealed that the removal mechanism included the physical adsorption of biochar and the redox reaction of Fe0. Moreover, copper existing in the iron mud was also reduced to Cu0, which was beneficial to catalyze the oxidation of iron; the degradation of RB was promoted at the same time.

Three dimensional band-filling control of complex oxides triggered by interfacial electron transfer.

The d-band-filling of transition metals in complex oxides plays an essential role in determining their structural, electronic and magnetic properties. Traditionally, at the oxide heterointerface, band-filling control has been achieved via electrostatic modification in the structure of field-effect transistors or electron transfer, which is limited to the quasi-two-dimension at the interface. Here we report a three-dimensional (3D) band-filling control by changing the local lattice coordination in a designed oxide heterostructure. At the LaCoO3/LaTiO3 heterointerface, due to the Fermi level mismatch, electrons transfer from LaTiO3 to LaCoO3. This triggers destabilisation of the CoO6 octahedrons, i.e. the formation of lattice configurations with a reduced Co valence. The associated oxygen migration results in the 3D topotactic phase transition of LaCoO3. Tuned by the thickness of LaTiO3, different crystalline phases and band-fillings of Co occur, leading to the emergence of different magnetic ground states.