Modified Jordanian zeolitic tuff in hydrocarbon removal from surface water.

This work aims to investigate the potential of Jordanian raw zeolitic tuff (RZT) as oil adsorbent for oil-contaminated water. As hydrophobic properties are the primary determinants of effective oil adsorbents, the hydrophobicity of RZT was enhanced by dealumination process; since the degree of hydrophobicity of zeolites is directly dependent on their aluminum content. The microemulsion modification of the dealuminated zeolitic tuff (TZT) was also applied to increase its hydrophobicity. The raw and modified tuffs were characterized in terms of the surface area and porosity (BET), mineral composition (XRD), microstructure and morphology using scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). In this work, a mixture of water and kerosene was used to examine the hydrophobic/organophilic character of raw and modified zeolitic tuff. Water/dodecane and water/octane mixtures were used to study the kinetics of the adsorption over zeolitic tuff. The results revealed that the sorption capacity using kerosene as a mixed model (water-oil) was enhanced by three- and four-fold for TZT and micro-emulsified zeolitic (MeTZT) tuff respectively. The adsorption capacity of modified zeolitic was compared with that of activated carbon adsorbents.

Molecular Treatment of Nano-Kaolinite Generations.

A procedure is developed for defining a compositionally and structurally realistic, atomic-scale description of exfoliated clay nanoparticles from the kaolinite family of phylloaluminosilicates. By use of coordination chemical principles, chemical environments within a nanoparticle can be separated into inner, outer, and peripheral spheres. The edges of the molecular models of nanoparticles were protonated in a validated manner to achieve charge neutrality. Structural optimizations using semiempirical methods (NDDO Hamiltonians and DFTB formalism) and ab initio density functionals with a saturated basis set revealed previously overlooked molecular origins of morphological changes as a result of exfoliation. While the use of semiempirical methods is desirable for the treatment of nanoparticles composed of tens of thousands of atoms, the structural accuracy is rather modest in comparison to DFT methods. We report a comparative survey of our infrared data for untreated crystalline and various exfoliated states of kaolinite and halloysite. Given the limited availability of experimental techniques for providing direct structural information about nano-kaolinite, the vibrational spectra can be considered as an essential tool for validating structural models. The comparison of experimental and calculated stretching and bending frequencies further justified the use of the preferred level of theory. Overall, an optimal molecular model of the defect-free, ideal nano-kaolinite can be composed with respect to stationary structure and curvature of the potential energy surface using the PW91/SVP level of theory with empirical dispersion correction (PW91+D) and polarizable continuum solvation model (PCM) without the need for a scaled quantum chemical force field. This validated theoretical approach is essential in order to follow the formation of exfoliated clays and their surface reactivity that is experimentally unattainable.

Surface Characterization of Mechanochemically Modified Exfoliated Halloysite Nanoscrolls.

Surface modifications fundamentally influence the morphology of kaolinite nanostructures as a function of crystallinity and the presence of contaminants. Besides morphology, the catalytic properties of 1:1-type exfoliated aluminosilicates are also influenced by the presence of defect sites that can be generated in a controlled manner by mechanochemical activation. In this work, we investigated exfoliated halloysite nanoparticles with a quasi-homogeneous, scroll-type secondary structure toward developing structural/functional relationships for composition, atomic structure, and morphology. The surface properties of thin-walled nanoscrolls were studied as a function of mechanochemical activation expressed by the duration of dry-grinding. The surface characterizations were carried out using N2, NH3, and CO2 adsorption measurements. The effects of grinding on the nanohalloysite structure were followed using thermoanalytical thermogravimetric/derivative thermogravimetric (TG/DTG) and infrared spectroscopic [Fourier transform infrared/attenuated total reflection (FTIR/ATR)] techniques. Grinding results in partial dehydroxylation with similar changes as those observed for heat treatment above 300 °C. Mechanochemical activation shows a decrease in the dehydroxylation mass loss and the DTG peak temperature, a decrease in the specific surface area and the number of mesopores, an increase in the surface acidity, blue shift of surface hydroxide bands, and a decrease in the intensity of FTIR/ATR bands as a function of the grinding time. The experimental observations were used to guide atomic-scale structural and energetic simulations using realistic molecular cluster models for a nanohalloysite particle. A full potential energy surface description was developed for the mechanochemical activation and/or heating toward nanometahalloysite formation that aids the interpretation of experimental results. The calculated differences upon dehydroxylation show a remarkable agreement with the mass loss values from DTG measurements.

Removal of Methylene Blue from Aqueous Solution by Mixture of Reused Silica Gel Desiccant and Natural Sand or Eggshell Waste.

The purpose of this work was to develop, characterize and test new low-cost materials suitable for removing methylene blue dye from water and wastewater by adsorption. The solid materials consisted of silica gel powder (SG), silica gel mixed with eggshell powder (SG-ES) and a mixture of silica gel with sand from the western Iraqi desert (SG-SI). The samples were milled by using an electrical mixer and a ball mill, followed by a drying step. In addition, desert sand was acid-treated in order to remove impurities. The structure and chemical composition of the samples were investigated by X-ray diffraction (XRD), a scanning electron microscopy technique equipped with an energy-dispersive X-ray spectrometer (SEM-EDX), a low-temperature nitrogen adsorption (BET) technique, thermo-analytical (TG/TGA) measurements and Fourier-transformed infrared spectroscopy (FTIR). The previously mentioned materials were tested to remove methylene blue from an aqueous solution. The adsorption experiments were monitored by ultraviolet-visible (UV-Vis) spectrophotometry and showed that SG and SG-ES gave promising results for the methylene blue removal from water. After 40 min of treatment of the aqueous solution containing 10 mg/L of MB at room temperature, the tested SG, SG-ES and SG-SI materials were found to have 86%, 80% and 57% dye adsorption efficiency, respectively. Taking into consideration not only the adsorption activity of the studied material but their availability, cost and concepts of cleaner production and waste minimization, the developed silica gel with eggshell can be considered as a good, cost-effective alternative to commercially available activated-carbon-based adsorbents. Different kinetic and isotherm models were fitted to the experimental results. A pseudo-second-kinetics-order model revealed high correlation fitting, while the Freundlich model was found to appropriately describe the adsorption isotherm. The thermal stability during the possible regeneration process of the SG-ES adsorbent mixture and its interaction mechanism with cationic dye was discussed.

Poly-NIPAM/Fe3O4/multiwalled carbon nanotube nanocomposites for kerosene removal from water.

Multiwalled carbon nanotubes (MWCNTs) were oxidized using a mixture of H2SO4 and HNO3, and the oxidized MWCNTS were decorated with magnetite (Fe3O4). Finally, poly-N-isopropyl acrylamide-co-butyl acrylate (P-NIPAM) was added to obtain P-NIPAM/Fe/MWCNT nanocomposites. The nanosorbents were characterized by various techniques, including X-ray diffraction, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, and Brunauer-Emmett-Teller analysis. The P-NIPAM/Fe/MWCNT nanocomposites exhibited increased surface hydrophobicity. Owing to their higher adsorption capacity, their kerosene removal efficiency was 95%; by contrast, the as-prepared, oxidized, and magnetite-decorated MWCNTs had removal efficiencies of 45%, 55%, and 68%, respectively. The P-NIPAM/Fe/MWCNT nanocomposites exhibited a sorbent capacity of 8.1 g/g for kerosene removal from water. The highest kerosene removal efficiency from water was obtained at a process time of 45 min, sorbent dose of 0.005 g, solution temperature of 40 °C, and pH 3.5. The P-NIPAM/Fe/MWCNTs showed excellent stability after four cycles of kerosene removal from water followed by regeneration. The reason may be the increase in the positive charge of the polymer at pH 3.5 and the increased adsorption affinity of the adsorbent toward the kerosene contaminant. The pseudo second-order model was found to be the most suitable model for studying the kinetics of the adsorption reaction.

V2O5, CeO2 and Their MWCNTs Nanocomposites Modified for the Removal of Kerosene from Water.

In this paper, the application of multiwalled carbon nanotubes (MWCNTs) based on metal oxide nanocomposites as adsorbents for the removal of hydrocarbons such as kerosene from water was investigated. Functionalized MWCNTs were obtained by chemical oxidation using concentrated sulfuric and nitric acids. V2O5, CeO2, and V2O5:CeO2 nanocomposites were prepared using the hydrothermal method followed by deposition of these oxides over MWCNTs. Individual and mixed metal oxides, fresh MWCNTs, and metal oxide nanoparticle-doped MWCNTs using different analysis techniques were characterized. XRD, TEM, SEM, EDX, AFM, Raman, TG/DTA, and BET techniques were used to determine the structure as well as chemical and morphological properties of the newly prepared adsorbents. Fresh MWCNTs, Ce/MWCNTs, V/MWCNTs, and V:Ce/MWCNTs were applied for the removal of kerosene from a model solution of water. GC analysis indicated that high kerosene removal efficiency (85%) and adsorption capacity (4270 mg/g) after 60 min of treatment were obtained over V:Ce/MWCNTs in comparison with fresh MWCNTs, Ce/MWCNTs and V/MWCNTs. The kinetic data were analyzed using the pseudo-first order, pseudo-second order, and intra-particle diffusion rate equations.

Novel Hybrid Nanoparticles: Synthesis, Functionalization, Characterization, and Their Application in the Uptake of Scandium (III)Ions from Aqueous Media.

The aim of this study was to prepare novel supramolecular hybrid nanoparticles (HNPs) that can selectively separate and recover scandium metal ions, Sc(III), from an aqueous phase based on molecular recognition technology (MRT). Moreover, this approach is fully compatible with green chemistry principles. In this work, natural amorphous silica (SiO2) nanoparticles were prepared by a precipitation method from Iraqi rice husk (RH) followed by surface modification with 3-amino-propyl triethoxysilane (APTES) as coupling agent and Kryptofix 2.2.2 (K2.2.2) as polycyclic ligand. To evaluate the potential of the hybrid nanoparticles, the prepared HNPs were used for the solid-liquid extraction of scandium, Sc(III), ions from model solutions due to the fact that K2.2.2 are polycyclic molecules. These polycyclic molecules are able to encapsulate cations according to the corresponding cavity size with the ionic radius of metal by providing a higher protection due their cage-like structures. Moreover, the authors set the objectives to design a high-technology process using these HNPs and to develop a Sc recovery method from the aqueous model solution prior to employing it in industrial applications, e.g., for Sc recovery from red mud leachate. The concentrations of Sc model solutions were investigated using the UV-Vis spectrophotometer technique. Different characterization techniques were used including scanning electron microscope (SEM), atomic force microscopy (AFM), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), X-ray fluorescence (XRF), and Fourier transform infrared (FTIR). The extraction efficiency of Sc varied from 81.3% to 96.7%. Moreover, the complexed Sc ions were efficiently recovered by HCl with 0.1 mol/L concentration. The stripping ratios of Sc obtained ranged from 93.1% to 97.8%.

Characterization of kaolinite-ammonium acetate complexes prepared by one-step homogenization method.

Although kaolinite-ammonium acetate complexes are of interest in the area of kaolinite nanocomposites, the structures of these complexes have remained largely elusive. Experimental and molecular simulation analysis is used to investigate their structures, revealing that two types of water-containing kaolinite-ammonium acetate complex exist. A cost-efficient one-step homogenization method was used to synthesize these complexes. The effect of the aging time and the amount of reagents on the intercalation were characterized experimentally by X-ray diffraction, thermogravimetry, Fourier transform infrared spectroscopy and scanning electron microscopy. The optimal degree of intercalation was obtained by using two orders of magnitude lower amount of reagents than in the case of the solution method. It was found that the so far less investigated 1.7-nm complex has higher water content than the 1.4-nm one. For both complexes, our molecular simulations predict the double-layered structure of the acetate ions, which is usually assumed in the case of the kaolinite-acetate complexes. For the 1.7-nm complex, however, a quasi-triple-layered structure of water molecules instead of the double-layered one was calculated.