Impact of microcarrier concentration on mesenchymal stem cell growth and death: Experiments and modeling.

Mesenchymal stem cell (MSC) products are promising therapeutic candidates to treat a wide range of pathologies. The successful commercialization of these cell therapies will, however, depend on the development of reproducible cell production processes. For this, using microcarriers as growth supports within controlled conditions may be a viable process option. Although increasing microcarrier concentration may be associated with greater productivity due to the increased available culture surface, additional friction or shocks between microcarriers are likely to lead to undesired cell death. However, data detailing the impact of microcarrier collisions on MSC growth remains scarce. The following work demonstrates that MSC growth on microcarriers is greatly influenced by particle concentration even when little impact is observed on the apparent growth rate. It is suggested that the apparent growth rate may result in an equilibrium between growth and death kinetics which are independently affected by particle concentration and that certain MSC quality attributes may be progressively degraded in parallel. In addition, the theoretical reduction of the MSC growth rate was modeled according to the ratio between the average interparticle distance and the Kolmogorov scale. This study is an original contribution toward understanding the hydrodynamic effects in microcarrier-based stem cell cultures.

Secretome of Mesenchymal Stem Cells from Consecutive Hypoxic Cultures Promotes Resolution of Lung Inflammation by Reprogramming Anti-Inflammatory Macrophages.

The secretome from hypoxia-preconditioned mesenchymal stem cells (MSCs) has been shown to promote resolution of inflammation and alleviate acute lung injury (ALI) through its immunomodulatory function. However, the effects of consecutive hypoxic culture on immunomodulatory function of the MSCs secretome are largely unclarified. Here, we intend to investigate the effects of consecutive hypoxia on therapeutic efficacy of conditioned medium derived from MSCs (MSCs-CM) in alleviating ALI. Human umbilical cord-derived MSCs (UC-MSCs) were consecutively cultured in 21% O2 (Nor-MSCs) or in 1% O2 (Hypo-MSCs) from passage 0. Their conditioned medium (Nor-CM and Hypo-CM respectively) was collected and administered into ALI models. Our findings confirmed that Hypo-MSCs exhibited increased proliferation ability and decreased cell senescence compared with Nor-MSCs. Consecutive hypoxia promoted UC-MSCs to secrete immunomodulatory cytokines, such as insulin-like growth factor 1(IGF1), IL10, TNFα-stimulated gene 6(TSG6), TGFß, and prostaglandin E2 (PGE2). Both Nor-CM and Hypo-CM could effectively limit lung inflammation, promote efferocytosis and modulate anti-inflammatory polarization of lung macrophages in ALI models. Moreover, the effects of Hypo-CM were more potent than Nor-CM. Taken together, our findings indicate that consecutive hypoxic cultures could not only promote both proliferation and quality of UC-MSCs, but also enhance the therapeutic efficacy of their secretome in mitigating lung inflammation by promoting efferocytosis and anti-inflammatory polarization of macrophages.

A new perfusion mode of culture for WJ-MSCs expansion in a stirred and online monitored bioreactor.

As a clinical dose requires a minimum of 106 cells per kilogram of patients, it is, therefore, crucial to develop a scalable method of production of Wharton Jelly mesenchymal stem cells (WJ-MSCs) with maintained inner characteristics. Scalable expansion of WJ-MSCs on microcarriers usually found in cell culture, involves specific cell detachment using trypsin and could have harmful effects on cells. In this study, the performance of batch, fed-batch, and perfused-continuous mode of culture were compared. The batch and fed-batch modes resulted in expansion factors of 5 and 43, respectively. The perfused-continuous mode strategy consisted of the implementation of a settling tube inside the bioreactor. The diameter of the tube was calculated to maintain microcarriers colonized by cells in the bioreactor whereas empty microcarriers (responsible for potentially damaging collisions) were removed, using a continuous flow rate based on MSCs physiological requirements. Thanks to this strategy, a maximal number of 800 million cells was obtained in a 1.5 L bioreactor in 10 days. Lastly, online dielectric spectroscopy was implemented in the bioreactor and indicated that cell growth could be monitored during the culture.

Laser photobiomodulation in pressure ulcer healing of human diabetic patients: gene expression analysis of inflammatory biochemical markers.

Pressure ulcers (PU) are wounds located mainly on bone surfaces where the tissue under pressure suffers ischemia leading to cellular lesion and necrosis , its causes and the healing process depend on several factors. The aim of this study was evaluating the gene expression of inflammatory/reparative factors: IL6, TNF, VEGF, and TGF, which take part in the tissue healing process under effects of low-level laser therapy (LLLT). In order to perform lesion area analysis, PUs were photographed and computer analyzed. Biochemical analysis was performed sa.mpling ulcer border tissue obtained through biopsy before and after laser therapy and quantitative real-time PCR (qRT-PCR) analysis. The study comprised eight individuals, mean age sixty-two years old, and sacroiliac and calcaneous PU, classified as degree III and IV according to the National Pressure Ulcer Advisory Panel (NPUAP). PUs were irradiated with low-level laser (InGaAIP, 100 mW, 660 nm), energy density 2 J/cm2, once a day, with intervals of 24 h, totaling 12 applications. The lesion area analysis revealed averaged improvement of the granulation tissue size up to 50% from pre- to post-treatment. qRT-PCR analysis revealed that IL6 values were not significantly different before and after treatment, TNF gene expression was reduced, and VEFG and TGF-ß gene expression increased after treatment. After LLLT, wounds presented improvement in gross appearance, with increase in factors VEFG and TGF-ß, and reduction of TNF; despite our promising results, they have to be analyzed carefully as this study did not have a control group.

Highly immunosuppressive myeloid cells correlate with early relapse after allogeneic stem cell transplantation.

BACKGROUND: Allogeneic hematopoietic stem cell transplantation (allo-HSCT) is the only curative treatment for myeloid malignancies such as some acute myeloid leukemias (AML) and high-risk myelodysplastic syndromes (MDS). It aims to eradicate the malignant clone using immunocompetent donor cells (graft-versus-leukemia effect, GVL). Unfortunately, relapse is the primary cause of transplant failure mainly related on HLA loss or downregulation and upregulation of inhibitory ligands on blasts which result in donor immune effector dysfunctions. METHODS: Between 2018 and 2021, we conducted a monocentric prospective study including 61 consecutive patients transplanted for AML or high-risk MDS. We longitudinally investigated immune cells at days + 30, + 90 and + 180 post-transplant from bone marrow and peripheral blood. We assessed the dynamics between myeloid derived suppressor cells (MDSCs) and T-cells. RESULTS: Among the 61 patients, 45 did not relapse over the first 12 months while 16 relapsed during the first year post-transplant. Through months 1 to 6, comparison with healthy donors revealed an heterogenous increase in MDSC frequency. In all recipients, the predominant MDSC subset was granulocytic with no specific phenotypic relapse signature. However, in relapsed patients, in vitro and in vivo functional analyses revealed that MDSCs from peripheral blood were highly immunosuppressive from day + 30 onwards, with an activated NLRP3 inflammasome signature. Only circulating immunosuppressive MDSCs were statistically correlated to circulating double-positive Tim3+LAG3+ exhausted T cells. CONCLUSION: Our simple in vitro functional assay defining MDSC immunosuppressive properties might serve as an early biomarker of relapse and raise the question of new preventive treatments targeting MDSCs in the future. Trial registration NCT03357172.

Scale-Up of Academic Mesenchymal Stromal Cell Production.

BACKGROUND: Many clinical trials have reported the use of mesenchymal stromal cells (MSCs) following the indication of severe SARS-CoV-2 infection. However, in the COVID19 pandemic context, academic laboratories had to adapt a production process to obtain MSCs in a very short time. Production processes, especially freezing/thawing cycles, or culture medium have impacts on MSC properties. We evaluated the impact of an intermediate cryopreservation state during MSC culture to increase production yields. METHODS: Seven Wharton's jelly (WJ)-MSC batches generated from seven different umbilical cords with only one cryopreservation step and 13 WJ-MSC batches produced with intermediate freezing were formed according to good manufacturing practices. The identity (phenotype and clonogenic capacities), safety (karyotype, telomerase activity, sterility, and donor qualification), and functionality (viability, mixed lymphocyte reaction) were analyzed. RESULTS: No significant differences between MSC production processes were observed, except for the clonogenic capacity, which was decreased, although it always remained above our specifications. CONCLUSIONS: Intermediate cryopreservation allows an increase in the production yield and has little impact on the basic characteristics of MSCs.

Long term culture of mesenchymal stem cells in hypoxia promotes a genetic program maintaining their undifferentiated and multipotent status.

BACKGROUND: In the bone marrow, hematopietic and mesenchymal stem cells form a unique niche in which the oxygen tension is low. Hypoxia may have a role in maintaining stem cell fate, self renewal and multipotency. However, whereas most studies addressed the effect of transient in vitro exposure of MSC to hypoxia, permanent culture under hypoxia should reflect the better physiological conditions. RESULTS: Morphologic studies, differentiation and transcriptional profiling experiments were performed on MSC cultured in normoxia (21% O2) versus hypoxia (5% O2) for up to passage 2. Cells at passage 0 and at passage 2 were compared, and those at passage 0 in hypoxia generated fewer and smaller colonies than in normoxia. In parallel, MSC displayed (>4 fold) inhibition of genes involved in DNA metabolism, cell cycle progression and chromosome cohesion whereas transcripts involved in adhesion and metabolism (CD93, ESAM, VWF, PLVAP, ANGPT2, LEP, TCF1) were stimulated. Compared to normoxic cells, hypoxic cells were morphologically undifferentiated and contained less mitochondrias. After this lag phase, cells at passage 2 in hypoxia outgrew the cells cultured in normoxia and displayed an enhanced expression of genes (4-60 fold) involved in extracellular matrix assembly (SMOC2), neural and muscle development (NOG, GPR56, SNTG2, LAMA) and epithelial development (DMKN). This group described herein for the first time was assigned by the Gene Ontology program to "plasticity". CONCLUSION: The duration of hypoxemia is a critical parameter in the differentiation capacity of MSC. Even in growth promoting conditions, hypoxia enhanced a genetic program that maintained the cells undifferentiated and multipotent. This condition may better reflect the in vivo gene signature of MSC, with potential implications in regenerative medicine.

Quality by design to define critical process parameters for mesenchymal stem cell expansion.

Stem cell-based therapeutic products could be the key to treat the deadliest current pathologies, ranging from neuro-degenerative to respiratory diseases. However, in order to bring these innovative therapeutics to a commercialization stage, reproducible manufacturing of high quality cell products is required. Although advances in cell culture techniques have led to more robust production processes and dramatically accelerated the development of early-phase clinical studies, challenges remain before regulatory approval, particularly to define and implement science-based quality standards (essential pre-requisites for national health agencies). In this regard, using new methodologies, such as Quality By Design (QBD), to build the production process around drug quality, could significantly reduce the chance of product rejection. This review-based work aims to perform a QBD approach to Mesenchymal Stem Cell (MSC) manufacturing in standard two-dimensional flasks, using published studies which have determined the impact of individual process parameters on defined Critical Quality Attributes (CQA). Along with this bibliographic analysis, parameter criticality was determined during the two main manufacturing stages (cell extraction and cell amplification) along with an overall classification in view of identifying the Critical Process Parameters (CPP). The analysis was performed in view of an improved standardization between research teams, and should contribute to reduce the gap towards compliant Good Manufacturing Practice (cGMP) manufacturing.

Characterization of Bone Marrow and Wharton's Jelly Mesenchymal Stromal Cells Response on Multilayer Braided Silk and Silk/PLCL Scaffolds for Ligament Tissue Engineering.

(1) Background: A suitable scaffold with adapted mechanical and biological properties for ligament tissue engineering is still missing. (2) Methods: Different scaffold configurations were characterized in terms of morphology and a mechanical response, and their interactions with two types of stem cells (Wharton's jelly mesenchymal stromal cells (WJ-MSCs) and bone marrow mesenchymal stromal cells (BM-MSCs)) were assessed. The scaffold configurations consisted of multilayer braids with various number of silk layers (n = 1, 2, 3), and a novel composite scaffold made of a layer of copoly(lactic acid-co-(e-caprolactone)) (PLCL) embedded between two layers of silk. (3) Results: The insertion of a PLCL layer resulted in a higher porosity and better mechanical behavior compared with pure silk scaffold. The metabolic activities of both WJ-MSCs and BM-MSCs increased from day 1 to day 7 except for the three-layer silk scaffold (S3), probably due to its lower porosity. Collagen I (Col I), collagen III (Col III) and tenascin-c (TNC) were expressed by both MSCs on all scaffolds, and expression of Col I was higher than Col III and TNC. (4) Conclusions: the silk/PLCL composite scaffolds constituted the most suitable tested configuration to support MSCs migration, proliferation and tissue synthesis towards ligament tissue engineering.

Impact of the type of microcarrier and agitation modes on the expansion performances of mesenchymal stem cells derived from umbilical cord.

The present study proposed to compare the impact of agitation mode (static, orbital, and mechanical) on the culture of mesenchymal stem cells extracted from the Wharton's jelly of umbilical cords (WJ-MSC), in a clinical grade culture medium, using human platelet lysate and different xeno-free microcarriers. Attachment, expansion, and detachment performances were characterized by a new dedicated tool of microscopic image posttreatment, allowing an in situ cell counting without detachment step. Results showed that performances in static mode were not necessarily representative of those obtained in dynamic mode. Moreover, impacts on nutrient consumptions and metabolite productions were identified, such as a higher glutamine consumption when Cytodex-1 microcarriers were used. The detachment strategy used was relatively efficient for Star-Plus, Plastic-Plus, and Hillex II, but not sufficient for Cytodex-1. Despite Cytodex-1 presented promising attachment and expansion performances, Star-Plus and Plastic-Plus showed a better compromise, respectively, for the orbital and the mechanical agitation modes.

Effect of alginate culture and mechanical stimulation on cartilaginous matrix synthesis of rat dedifferentiated chondrocytes.

To investigate whether the application of alginate culture and mechanical stimulation will improve the synthesis of cartilaginous matrix in dedifferentiated chondrocytes, rat chondrocytes underwent dedifferentiation upon serial monolayer culture up to passage 6, and then were encapsulated in 2% alginate gel and subject to static culture. After 28 days culture in static, the beads were exposed to 48 h of mechanical stimulation with continuous agitation. The sGAG content in alginate bead was measured by alcian blue staining. The expression of collagen protein was detected using immunofluorescence. After 28 days culture in alginate bead, the dedifferentiated chondrocytes remained round in shape and re-synthesized the chondrocyte-specific matrix. Compared with static culture, mechanical stimulation induced statistically increases in the production of glycosaminoglycan (p< or =0.01), as well as in the synthesis of collagen type II protein (p< or =0.05). On the contrary, no positive expression of collagen type I protein was observed at the end of culture. Our results demonstrated that both of alginate culture and mechanical stimulation help to restore chondrocyte phenotype and promotes the synthesis of cartilaginous matrix.

Mesenchymal stem cell interacted with PLCL braided scaffold coated with poly-l-lysine/hyaluronic acid for ligament tissue engineering.

The challenge of finding an adapted scaffold for ligament tissue engineering remains unsolved after years of researches. A technology to fabricate a multilayer braided scaffold with flexible and elastic poly (l-lactide-co-caprolactone) (PLCL 85/15) has been recently pioneered by our team. In this study, polyelectrolyte multilayer films (PEM) with poly-l-lysine (PLL)/ hyaluronic acid (HA) were deposited on this scaffold. After PEM modification, polygonal (PLL) and particle-like (HA) structures were present on the braided scaffold with no significant variation of fibers Young's modulus. Wharton's jelly mesenchymal stem cells (WJ-MSC) and bone marrow mesenchymal stem cells (BM-MSC) showed good metabolic activity on scaffolds. They presented a spindled shape along the fiber longitudinal direction, and crossed the fibers to form cell bridges. Collagen type I, collagen type III, and tenascin-C secreted by MSCs were detected on day 14. Moreover, one-layer modified scaffold presented increased chemotaxis. As a conclusion, our results indicate that this braided PLCL scaffold with one-layer PEM modification shows inspiring potential with satisfying mechanical properties and biocompatibility. It opens new perspectives to incorporate growth factors within PEM-modified braided PLCL scaffold for ligament tissue engineering and to recruit endogenous cells after implantation. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 3042-3052, 2018.

Mechanical stimulations on human bone marrow mesenchymal stem cells enhance cells differentiation in a three-dimensional layered scaffold.

Scaffolds laden with stem cells are a promising approach for articular cartilage repair. Investigations have shown that implantation of artificial matrices, growth factors or chondrocytes can stimulate cartilage formation, but no existing strategies apply mechanical stimulation on stratified scaffolds to mimic the cartilage environment. The purpose of this study was to adapt a spraying method for stratified cartilage engineering and to stimulate the biosubstitute. Human mesenchymal stem cells from bone marrow were seeded in an alginate (Alg)/hyaluronic acid (HA) or Alg/hydroxyapatite (Hap) gel to direct cartilage and hypertrophic cartilage/subchondral bone differentiation, respectively, in different layers within a single scaffold. Homogeneous or composite stratified scaffolds were cultured for 28 days and cell viability and differentiation were assessed. The heterogeneous scaffold was stimulated daily. The mechanical behaviour of the stratified scaffolds were investigated by plane-strain compression tests. Results showed that the spraying process did not affect cell viability. Moreover, cell differentiation driven by the microenvironment was increased with loading: in the layer with Alg/HA, a specific extracellular matrix of cartilage, composed of glycosaminoglycans and type II collagen was observed, and in the Alg/Hap layer more collagen X was detected. Hap seemed to drive cells to a hypertrophic chondrocytic phenotype and increased mechanical resistance of the scaffold. In conclusion, mechanical stimulations will allow for the production of a stratified biosubstitute, laden with human mesenchymal stem cells from bone marrow, which is capable in vivo to mimic all depths of chondral defects, thanks to an efficient combination of stem cells, biomaterial compositions and mechanical loading.

Research progress in liver tissue engineering.

Liver transplantation is the definitive treatment for patients with end-stage liver diseases (ESLD). However, it is hampered by shortage of liver donor. Liver tissue engineering, aiming at fabricating new livers in vitro, provides a potential resolution for donor shortage. Three elements need to be considered in liver tissue engineering: seeding cell resources, scaffolds and bioreactors. Studies have shown potential cell sources as hepatocytes, hepatic cell line, mesenchymal stem cells and others. They need scaffolds with perfect biocompatiblity, suitable micro-structure and appropriate degradation rate, which are essential charateristics for cell attachment, proliferation and secretion in forming extracellular matrix. The most promising scaffolds in research include decellularized whole liver, collagens and biocompatible plastic. The development and function of cells in scaffold need a microenvironment which can provide them with oxygen, nutrition, growth factors, et al. Bioreactor is expected to fulfill these requirements by mimicking the living condition in vivo. Although there is great progress in these three domains, a large gap stays still between their researches and applications. Herein, we summarized the recent development in these three major fields which are indispensable in liver tissue engineering.

Rat BMSC infusion was unable to ameliorate inflammatory injuries in tissues of mice with LPS-induced endotoxemia.

BACKGROUND: Mesenchymal stem cells (MSC) have been shown to have potent immunoregulatory effects. They are able to mitigate inflammation in many contexts of immune disorders, including autoimmune diseases and graft-versus-host disease (GVHD). Endotoxemia can induce systematic inflammation in the body. In this study, we try to investigate whether MSC can attenuate inflammation in models of LPS-induced endotoxemia. METHODS: Bone marrow MSC (BMSC) were isolated and expanded from rats of 4~6-week age. Adult mice were divided randomly into Control group, Model group and BMSC group. LPS were injected peritoneally into mice of Model group and BMSC group to induce endotoxemia. For BMSC group mice, 1×106 BMSC were injected through tail vein 1 hour after LPS application. Animals were sacrificed after 24 hours. Inflammatory damage in lungs and livers were detected through histochemistry. Wet/dry ratio of lung tissues was calculated, levels of inflammatory factors as IL-1ß and TNF-α in lung tissues were measured through ELISA. RESULTS: Inflammatory pathological changes in lung and liver in BMSC group were comparable to those in Model group. Moreover, in some animals, the injuries were exacerbated after BMSC treatment. Accordingly, wet/dry ratio of lung in BMSC group mice was higher than that in Model group mice. IL-1ß level in BMSC-treated group mice was significantly augmented, however, no significant changes were detected between these two groups for level of TNF-α. CONCLUSION: Our results showed that application of BMSC in LPS-induced endotoxemia models couldn't attenuate the inflammatory injuries in tissues. Although BMSC have been shown to be able to induce immune inhibition, however, in some instances, their immuno-inhibitory function might be regulated by the local environment.

MyD88/ERK/NFkB pathways and pro-inflammatory cytokines release in periodontal ligament stem cells stimulated by Porphyromonas gingivalis.

The present study was aimed at investigating whether human Periodontal Ligament Stem Cells (hPDLSCs) were capable of sensing and reacting to lipopolysaccharide from Porphyromonas gingivalis (LPS-G) which is widely recognized as a major pathogen in the development and progression of periodontitis. At this purpose hPDLCs were stimulated with 5 µg/mL LPS-G various times and the expression of toll-like receptor 4 (TLR4) was evaluated. Toll-like receptors (TLRs) play an essential role in innate immune signaling in response to microbial infections, and in particular TLR4, type-I transmembrane proteins, has been shown recognizing LPS-G. Our results put in evidence, in treated samples, an overexpression of TLR4 indicating that, hPDLSCs express a functional TLR4 receptor. In addition, LPS-G challenge induces a significant cell growth decrease starting from 24 h until 72 h of treatment. LPS-G leads the activation of the TLR4/MyD88 complex, triggering the secretion of proinflammatory cytokines cascade as: IL-1α, IL-8, TNF-α and ß and EOTAXIN. Moreover, the upregulation of pERK/ERK signaling pathways and NFkB nuclear translocation was evident. On the basis of these observations, we conclude that hPDLSCs could represent an appropriate stem cells niche modeling leading to understand and evaluate the biological mechanisms of periodontal stem cells in response to LPS-G, mimicking in vitro an inflammatory process occurring in vivo in periodontal disease.

A simple method for quantifying high density antigens in erythrocyte membrane by flow cytometry.

RBC flow cytometric analysis is usually used to quantify antigen content. Calibration systems enable antigen content determination by relating mean fluorescence intensity with the number of bound antibody molecules (equivalent to the number of antigen molecules). For that reason, antibodies must be used at saturating concentration, which may lead to agglutination when working with high density antigens. Then, forward scattering, side scattering and fluorescence will be increased, thus obtaining wrong results. In this work, the simple Langmuir adhesion model was applied. Flow cytometry was used to quantify GPA, a transmembrane protein present at high density on RBC. The fluorescence intensity of samples at different anti-GPA sub-saturating concentrations was measured. Sometimes, agglutinates were present and two peaks of fluorescence were observed, the principal one corresponding to isolated cells and the secondary one corresponding to agglutinated cells. In those cases, the principal peak was taken into account for the analysis. The GPA antigen content obtained for nine analyzed samples ranged from 3 to 13 x 10(5) sites per cell, which is similar to those values found in literature. Therefore, the Langmuir adsorption model enables us to determine the antigen content for the anti-GPA/GPA system on RBC membrane. This model could be used to quantify high density antigens in RBC and in other cells.

Evaluation of human MSCs cell cycle, viability and differentiation in micromass culture.

Mesenchymal stem cells (MSCs) have the potential to differentiate into distinct mesenchymal tissue cells. They are easy to expand while maintaining their undifferentiated state, which suggests that these cells could be an attractive cell source for tissue engineering of cartilage. In vitro high density micromass culture has been widely used for chondrogenesis induction. Our objective was to investigate human MSCs cell cycle, viability and differentiation in these conditions. Therefore, to induce human MSCs chondrogenesis, micromasses were cultured in the presence of transforming growth factor-beta1 in serum free medium for 21 days. Cell cycle, cell viability and cell phenotype were analyzed by flow cytometry. From day 0 to 7, the G0/G1 phase increased, whereas the S phase decreased gradually, but cell cycle phases (S, G0/G1 and G2/M) did not significantly change after day 7. Less than 10% of cells were apoptotic, but no necrosis was observed, even at day 21. We observed a decrease in CD90 and CD105 expression, from day 0 to 21. In conclusion, our results demonstrate a good viability of human MSCs in micromass culture during the whole period of culture. Moreover, micromass culture allowed human MSCs to be synchronized at the G0/G1 phase, while their phenotype suggested some degree of differentiation.

Comparative Study of the Physiotherapeutic and Drug Protocol and Low-Level Laser Irradiation in the Treatment of Pain Associated with Temporomandibular Dysfunction.

BACKGROUND: The temporomandibular joint (TMJ) is a structure of the craniofacial complex affected by neurological diseases. Orthopedic and musculoskeletal changes can also cause temporomandibular disorders (TMD) and pain. Low-level laser (LLL) therapy has been studied in the treatment of temporomandibular jaw (TMJ) dysfunction, and controversial results were obtained. OBJECTIVE: The objective of this work was comparing the physiotherapeutic and drug protocol (PDP) to LLL therapy in the treatment of pain associated with TMD. METHODS: A sample of 60 female patients, 20-50 years of age, TMD triggering agents (stress, parafunctional habits) controlled, was randomly divided into three groups, group 1 (G1)-LLL (780 nm laser, dose of 35.0 J/cm2, for 20 sec, thrice a week, for 4 weeks); group 2 (G2)-PDP (hot packs thrice a day, morning, afternoon, and evening, for 15 min, exercise of opening and closing the mouth, twice a day, myorelaxing and anti-inflammatory drug administration); and group 3 (G3)-Placebo (450 nm halogen lamp, Max LD Gnatus, light curing unit). RESULTS: Patients were evaluated every return appointment for the presence (P) or absence (A) of pain for 4 weeks and results were statistically analyzed. First week: 60% of G1, 100% G2, and 70% of G3-related pain. Second week: 55% of G1, 15% of G2, and 100% of G3-related pain. Third week: 10% of G1, 15% of G2, and 85% of G3-related pain. Last week: 0% of G1, 0% of G2, and 100% of G3-related pain. CONCLUSIONS: Based on obtained data, we concluded that, compared to PDP, LLL treatment is effective to control pain associated with TMD.

[Chondrocyte mecanobiology. Application in cartilage tissue engineering]. / Mécanobiologie du chondrocyte. Application à l'ingénierie du cartilage.

Cartilage is a hydrated connective tissue that withstands and distributes mechanical forces within joints. Chondrocytes utilize mechanical signals to maintain cartilaginous tissue homeostasis. They regulate their metabolic activity through complex biological and biophysical interactions with the extracellular matrix (ECM). Some mechanotransduction mechanisms are known, while many others no doubt remain to be discovered. Various aspects of chondrocyte mechanobiology have been applied to tissue engineering, with the creation of replacement tissue in vitro from bioresorbable or non-bioresorbable scaffolds and harvested cells. The tissues are maintained in a near-physiologic mechanical and biochemical environment. This paper is an overview of both chondrocyte mechanobiology and cartilage tissue engineering