Selective Electrooxidation of Crude Glycerol to Lactic Acid Coupled With Hydrogen Production at Industrially-Relevant Current Density.

Transforming glycerol (GLY, biodiesel by-product) into lactic acid (LA, biodegradable polymer monomer) through sustainable electrocatalysis presents an effective strategy to reduce biodiesel production costs and consequently enhance its applications. However, current research faces a trade-off between achieving industrially-relevant current density (>300 mA cm-2) and high LA selectivity (>80%), limiting technological advancement. Herein, a Au3Ag1 alloy electrocatalyst is developed that demonstrates exceptional LA selectivity (85%) under high current density (>400 mA cm-2). The current density can further reach 1022 mA cm-2 at 1.2 V versus RHE, superior to most previous reports for GLY electrooxidation. It is revealed that the Au3Ag1 alloy can enhance GLY adsorption and reactive oxygen species (OH*) generation, thereby significantly boosting activity. As a proof of concept, a homemade flow electrolyzer is constructed, achieving remarkable LA productivity of 68.9 mmol h-1 at the anode, coupled with efficient H2 production of 3.5 L h-1 at the cathode. To further unveil the practical possibilities of this technology, crude GLY extracted from peanut oil into LA is successfully transformed, while simultaneously producing H2 at the cathode. This work showcases a sustainable method for converting biodiesel waste into high-value products and hydrogen fuel, promoting the broader application of biodiesel.

Comparative Study of Immobilized Biolipasa-R for Second Generation Biodiesel Production from an Acid Oil.

The primary objective of this work is to develop a sustainable biocatalytic transesterification process for low-grade oils, aligning with EU green technology requirements for the shift to second generation biodiesel. Thus, we investigated the immobilization and subsequent application of the lipase Biolipasa-R on transesterification processes to produce fatty acid methyl esters (FAMEs) from both a sunflower oil and an acid oil which is a bioproduct of the biodiesel industry. The lipase was immobilized on biomaterials, such as diatomaceous earth, with a yield of 60 %, and commercial carriers such as methacrylic resins with a yield of 100 %. The enzyme demonstrated superior activity when immobilized on diatomaceous earth, particularly in reactions involving the acid oil, outperforming the benchmark enzyme Novozym® 435 (95.1 % and 35 % conversion respectively). This work highlights the potential of Biolipasa-R as a cost-effective and efficient biocatalyst for biodiesel production and emphasizes the environmental benefits of utilizing industrial byproducts and eco-friendly immobilization techniques. The findings suggest that Biolipasa-R is a promising candidate for industrial applications in biodiesel production, offering a sustainable solution for waste management and energy generation.

The expression of genes encoding novel Sesame oleosin variants facilitates enhanced triacylglycerol accumulation in Arabidopsis leaves and seeds.

Triacylglycerols (TAG), accumulate within lipid droplets (LD), predominantly surrounded by OLEOSINs (OLE), that protect TAG from hydrolysis. We tested the hypothesis that identifying and removing degradation signals from OLE would promote its abundance, preventing TAG degradation and enhancing TAG accumulation. We tested whether mutating potential ubiquitin-conjugation sites in a previously reported improved Sesamum indicum OLE (SiO) variant, o3-3 Cys-OLE (SiCO herein), would stabilize it and increase its lipogenic potential. SiCOv1 was created by replacing all five lysines in SiCO with arginines. Separately, six cysteine residues within SiCO were deleted to create SiCOv2. SiCOv1 and SiCOv2 mutations were combined to create SiCOv3. Transient expression of SiCOv3 in Nicotiana benthamiana increased TAG by two-fold relative to SiCO. Constitutive expression of SiCOv3 or SiCOv5, containing the five predominant TAG-increasing mutations from SiCOv3, in Arabidopsis along with mouse DGAT2 (mD) increased TAG accumulation by 54% in leaves and 13% in seeds compared with control lines coexpressing SiCO and mD. Lipid synthesis rates increased, consistent with an increase in lipid sink strength that sequesters newly synthesized TAG, thereby relieving the constitutive BADC-dependent inhibition of ACCase reported for WT Arabidopsis. These OLE variants represent novel factors for potentially increasing TAG accumulation in a variety of oil crops.

New insights into Chlorella vulgaris applications.

Environmental pollution is a big challenge that has been faced by humans in contemporary life. In this context, fossil fuel, cement production, and plastic waste pose a direct threat to the environment and biodiversity. One of the prominent solutions is the use of renewable sources, and different organisms to valorize wastes into green energy and bioplastics such as polylactic acid. Chlorella vulgaris, a microalgae, is a promising candidate to resolve these issues due to its ease of cultivation, fast growth, carbon dioxide uptake, and oxygen production during its growth on wastewater along with biofuels, and other productions. Thus, in this article, we focused on the potential of Chlorella vulgaris to be used in wastewater treatment, biohydrogen, biocement, biopolymer, food additives, and preservation, biodiesel which is seen to be the most promising for industrial scale, and related biorefineries with the most recent applications with a brief review of Chlorella and polylactic acid market size to realize the technical/nontechnical reasons behind the cost and obstacles that hinder the industrial production for the mentioned applications. We believe that our findings are important for those who are interested in scientific/financial research about microalgae.

Biodiesel production in India: Prospects, challenges, and sustainable directions.

Biodiesel has the potential to serve as a feasible substitute for fossil fuels in many sectors, including transportation and internal combustion engines, without requiring extensive modifications. UsinHemg alternative energy sources, including biodiesel, is necessary to effectively tackle the growing demand predominantly observed in the transportation sector. This review is aimed to examine the technological progress, potential benefits, obstacles, and prospects associated with using biodiesel in India. India exhibits a significant potential for biodiesel production due to the abundance of various biofuel crops within its territory. The information supplied includes recent information from official government reports and literature. Collaborative efforts among all stakeholders in the energy industry can achieve the realization of reducing imports of petroleum-based fuel. However, it is essential to consider several significant elements specific to the Indian context when considering the utilization of biodiesel. The reported findings in this research are expected to shed light on the current and prospects of biodiesel deployment in India.

A Holistic Approach to Circular Bioeconomy Through the Sustainable Utilization of Microalgal Biomass for Biofuel and Other Value-Added Products.

Emissions from transportation and industry primarily cause global warming, leading to floods, glacier melt, and rising seas. Widespread greenhouse gas emissions and resulting global warming pose significant risks to the environment, economy, and society. The need for alternative fuels drives the development of third-generation feedstocks: microalgae, seaweed, and cyanobacteria. These microalgae offer traits like rapid growth, high lipid content, non-competition with human food, and growth on non-arable land using brackish or waste water, making them promising for biofuel. These unique phototrophic organisms use sunlight, water, and carbon dioxide (CO2) to produce biofuels, biochemicals, and more. This review delves into the realm of microalgal biofuels, exploring contemporary methodologies employed for lipid extraction, significant value-added products, and the challenges inherent in their commercial-scale production. While the cost of microalgae bioproducts remains high, utilizing wastewater nutrients for cultivation could substantially cut production costs. Furthermore, this review summarizes the significance of biocircular economy approaches, which encompass the utilization of microalgal biomass as a feed supplement and biofertilizer, and biosorption of heavy metals and dyes. Besides, the discussion extends to the in-depth analysis and future prospects on the commercial potential of biofuel within the context of sustainable development. An economically efficient microalgae biorefinery should prioritize affordable nutrient inputs, efficient harvesting techniques, and the generation of valuable by-products.

Driving Sustainability in the United States: Efficacy of State-Level Biodiesel Policy Approaches.

The United States has significant greenhouse gas and criteria pollutant emissions that lead to global warming, human health, ozone, and smog issues, partially attributed to its diesel-consuming transport fleet. Until fleet electrification reaches cost parity with internal combustion engines, biodiesel use can reduce these negative impacts. In this study, we analyzed and categorized the biodiesel-supporting policies of each U.S. state using manual inductive coding to compare them against state-level biodiesel consumption and production. Through statistical modeling, we determined the efficacy of these policy approaches. The policy analysis identified that biodiesel policies that support infrastructure development and biodiesel production correlate significantly with increased biodiesel consumption at the state level. We also show that a combination of these policy categories correlates significantly with overall higher biodiesel consumption. Our methodological approach and policy analysis findings reveal valuable insight into the efficacy and outcomes from existing biofuel policies in the United States.

Sequencing analysis and efficient biodiesel production by lipase from Pseudomonas aeruginosa.

BACKGROUND: Recently, lipase processing for biodiesel production has shown a global increase as it is considered a potential alternative clean-fuel source. The current study's objective is to investigate of lipolytic activity of lipase produced from different strains of Pseudomonas aeruginosa (P. aeruginosa) in biodiesel production using edible plant oils. The goal is to develop an efficient and cost-effective method for producing inexpensive and environmentally friendly biodiesel. METHODS AND RESULTS: Four P. aeruginosa isolates were obtained from different environmental sources (soil), phenotypically identified, and it was confirmed by the PCR detection of the 16SrRNA gene. The isolated P. aeruginosa strains were screened for lipase production, and the recovered lipase was purified. Besides, the lipase (lip) gene was detected by PCR, and the purified PCR products were sequenced and analyzed. The production of biofuel was conducted using gas chromatography among tested oils. It was found that castor oil was the best one that enhances lipase production in-vitro.

Molecular phylogenetics of the Umbelopsis genus-identification of new species and evaluation of their oil application value.

AIMS: The aim of this study was to reconstruct the evolutionary framework of the genus Umbelopsis by using modern taxonomic strategies and evaluating the quality of oil and prospective uses of three distinct species. METHODS AND RESULTS: Three species of Umbelopsis were identified based on morphological characteristics and phylogenetic evidence obtained from three genes (ITS, LSU, and ACT). A new species of Umbelopsis was described and illustrated, and subsequently named U. ophiocordycipiticola. The characteristics of U. ophiocordycipiticola exhibited sporangia with a diameter ranging from 8 to 17 µm. and sporangiospores that were oval to ellipsoidal in shape, irregularly angular, with dimensions of ∼1.9-2.9 × 1.7-3.0 µm. Gas chromatography and mass spectrometry (GC-MS) were used to examine the composition of fatty acids. Notably, U. ophiocordycipiticola showed a significantly higher oil content of 50.89% in dry cell weight (DCW) compared to U. vinacea and U. ramanniana. The mean proportion of polyunsaturated fatty acids (PUFAs) in U. ophiocordycipiticola was 32.38%, and the maximum levels of γ-linolenic acid (GLA), arachidonic acid (ARA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA) in U. ophiocordycipiticola were found to be 14.51, 0.24, 0.54, and 0.53%, respectively. The biodiesel quality from all three species complied with applicable standards set by the American Association for Testing and Materials (ASTM 6751) and the Brazilian National Petroleum Agency (ANP 255). CONCLUSIONS: The establishment of a novel species, U. ophiocordycipiticola, was strongly supported by morphological and molecular evidence. Umbelopsis ophiocordycipiticola exhibited a high-value PUFA content. Additionally, three Umbelopsis species demonstrated good quality for biodiesel production.

Application of Response Surface Methodology (RSM) in the statistical evaluation of biodiesel production from the neutral lipids of the Coelastrella-Nannochloropsis consortium.

The paramount challenge in economically workable microalgal biodiesel production is the selection of a competent catalyst to improve the fatty acid methyl ester yield with desirable fatty acid composition. Though countless researchers have explored different homogeneous and heterogeneous catalysts to improve the transesterification efficacy, achieving greater biodiesel production from the neutral lipids of the microalgal consortium using a statistical tool, response surface methodology is scarce. Thus, the present study applied Response surface methodology to statistically analyze the biodiesel production from the neutral lipids of the indigenous Coelastrella-Nannochloropsis consortium (CNC) on the way to commercial feasibility. Onset of the study, the neutral lipids and acid value of the CNC were determined to be 18.74% and 2.73%, respectively. The transesterification of the neutral lipids of CNC was optimized through the coded factors in the RSM for various reaction parameters as combined influence viz., (i) Catalyst dose: methanol volume, (ii) Catalyst dose: reaction time; (iii) Catalyst dose: reaction temperature, (iv) Time: temperature, (v) time: methanol volume, (vi) temperature: methanol volume. Based on the ANOVA, coefficient determination, 2% KOH, 2 h time, 70 °C temperature, and 9 mL methanol volume were ascertained to be optimal values to accomplish 92% biodiesel production. Further, the biodiesel has desirable palmitic, palmitoleic, stearic, oleic, linoleic, and linolenic acids, with palmitic acid as the prevalent fatty acid contributing 16-18%. In addition, the tested fuel properties of CNC biodiesel satisfy international biodiesel standards.

Biodiesel production from eggshells derived bio-nano CaO catalyst-Microemulsion fuel blends for up-gradation of biodiesel.

The utilization of bio-oil derived from biomass presents a promising alternative to fossil fuels, though it faces challenges when directly applied in diesel engines. Microemulsification has emerged as a viable strategy to enhance bio-oil properties, facilitating its use in hybrid fuels. This study explores the microemulsification of Jatropha bio-oil with ethanol, aided by a surfactant, to formulate a hybrid liquid fuel. Additionally, a bio-nano CaO heterogeneous catalyst synthesized from eggshells is employed to catalyse the production of Jatropha biodiesel from the microemulsified fuel using microwave irradiation. The catalyst is characterized through UV-Vis, XRD, and SEM analysis. The investigation reveals a significant reduction in CO, CO2, and NOX emissions with the utilization of microemulsion-based biodiesel blends. Various blends of conventional diesel, Jatropha biodiesel, and ethanol are prepared with different ethanol concentrations (5, 10, and 20 wt%). Engine performance parameters, including fuel consumption, NOX emission, and brake specific fuel consumption, are analyzed. Results indicate that the conventional diesel/Jatropha biodiesel/ethanol (10 wt%) blend exhibits superior performance compared to conventional diesel, Jatropha biodiesel, and other blends. The fuel consumption of the conventional diesel/Jatropha biodiesel/ethanol (10 wt%) blend is measured at 554.6 g/h, surpassing that of conventional diesel and other biodiesel blends. The presence of water (0.14 %) in the blend reduces the heating value, consequently increasing the energy requirement. CO and CO2 emissions for the conventional diesel/Jatropha biodiesel/ethanol (10 wt%) blend are notably lower compared to conventional C-18 hydrocarbons and various biodiesel blends. These findings accentuate the efficacy of the microemulsion process in enhancing fuel characteristics and reducing emissions. Further investigations could explore optimizing the emulsifying agents and their impact on engine performance and emission characteristics, contributing to the advancement of sustainable fuel technologies.

Sugar cane bagasse hydrolysate (SBH) as a lucrative carbon supplement to upgrade the lipid and fatty acid production in Chlorococcum sp. for biodiesel through an optimized binary solvent system.

Cost is the crucial impediment in commercializing microalgal biodiesel. Therefore, cultivating microalgae in cost-effective nutrients reduces the upstream process cost remarkably. Thus, in this study, sugar cane bagasse hydrolysate (SBH) as a lucrative carbon supplement for Chlorococcum sp. and subsequent lipid extraction via an optimized solvent system for biodiesel production was investigated. Characterization of SBH revealed the presence of various monosaccharides and other sugar derivatives such as glucose, fructose, xylose, arabinose, etc. The maximum dry cell weight of 1.7 g/L was estimated in cultures grown in 10 mL SBH. Different solvents such as diethyl ether (DEE), chloroform (CHL), ethyl acetate (ETA), hexane (HEX), methanol (MET), ethanol (ETOH), acetone (ACE) and also combination of solvents (2:1 ratio) such as DEE: MET, CHL: MET, HEX: MET, HEX: ETOH was tested for lipid extraction efficacy. Among solvents used, 12.3% and 18.4% of lipids were extracted using CHL and CHL: MET, respectively, from 10 mL SBH amended cultures. However, the biodiesel yield was found to be similar at about 70.16 % in both SBH and no SBH-added cultures. The fatty acid profile of the biodiesel shows palmitic, oleic, linoleic, linolenic, and arachidonic acid as principal fatty acids. Further, the levels of SFAs, MUFAs, and PUFAs in 10 mL SBH-added cells were 24.67, 12.89, and 34.24%, respectively. Eventually, the fuel properties of Chlorococcum sp. biodiesel, satisfying international biodiesel standards, make the biodiesel a viable diesel substitute in the future.

Appraising the phycoremediation potential of cyanobacterial strains Phormidium and Oscillatoria for nutrient removal from textile wastewater (TWW) and synchronized biodiesel production from TWW-tolerant biomass.

In this study, phycoremediation of textile wastewater (TWW) by freshwater cyanobacterial strains such as sp., Oscillatoria sp. F01 and Oscillatoria sp. F02 was evaluated, and lipids were simultaneously extracted from biomass for biodiesel production. Onset of the study, Phormidium sp. and Oscillatoria sp. F01 has better growth rates, increased biomass production, high chlorophyll content, and efficient nutrient utilization in TWW compared to Oscillatoria sp. F02. Phormidium sp. showed 1.41 g/L dry weight, followed by Oscillatoria sp. F01 with 1.39 g/L and Oscillatoria sp. F02 with 1.02 g/L biomass. Both strains demonstrated their capability to elevate the pH level while reducing TDS and eliminating/reducing several nutrients such as nitrates, nitrites, phosphates, sulphates, sulphides, chlorides, calcium, sodium, and magnesium. Further, the total lipids extracted from the TWW-grown Phormidium sp., Oscillatoria sp. F01 and Oscillatoria sp. F02 was estimated to be 8.20, 13.70 and 11.20 %, respectively, on day 21, which was higher than the lipid content obtained from control cultures. Further, biodiesel produced from the lipids of all strains showed higher levels of C12:0, C16:0, C16:1, C18:1, C18:2, and C18:3 among all the fatty acids. Therefore, they can potentially offer a valuable source of lipids and diverse fatty acids for high-quality biodiesel production. This integrated system not only offers a solution for TWW treatment but also provides a feedstock for renewable fuel production simultaneously.

Investigation of bionano additives in red algae Cyanidioschyzon merolae ultrasonified MgO/MWCNT catalyzed biodiesel in optimized engine performance.

Renewable energy research is burgeoning with the anticipation of finding neat liquid fuel. Ultra sonification assisted biodiesel was derived from red algae Cyanidioschyzon merolae, with biodiesel yield of 98.9%. The results of GC MS of the prepared biodiesel showed higher concentration of methyl palmitate, methyl oleate, and stearate. This composition is appreciable, as this plays significance in desirable pour & cloud point properties. NMR spectrum revealed the ester linkages, presence of olefins, and α methyl position in olefins. Mixture of 30 wt% of biodiesel in diesel exhibited work efficiency, and also exhibited low pour point and, lower viscosity values. CeO2 and Fe2O3 nano particles were bio reduced, and were added as nano additive in biodiesel. 1:1 ratio of CeO2 and Fe2O3 added to biodiesel maximised the combustion ability of fuel owing to the oxygen storage capacity of CeO2. Further, this combination produced a satisfactory calorific value. Imbalanced ratios disrupted the catalytic and oxygen storage effects, reduced the overall energy release and calorific value of the biodiesel blend. Pour point and cetane number value of biodiesel blend ultrasonifacted with 1:1 mass ratio of Fe2O3 and CeO2 was observed to be around -7 °C and 53 °C respectively, and was better than other compositions. 1:1 mass ratio of NPS blended with 30 wt% BD in diesel showed tremendous increase in brake thermal efficiency, torque, and power. HC, NOX, and SOX emissions were reduced by 42.8%, 19.3%, and 57% respectively with 1:1 Fe2O3 and CeO2 mixed biodiesel blend. CeO2 favourably improved the oxygen storage capacity of the fuel, whereas Fe2O3 showed decrease in formation of gums and sediments in biodiesel.

Biobased heterogeneous renewable catalysts: Production technologies, innovations, biodiesel applications and circular bioeconomy.

The growing population and waste biomass accumulation are leading to increased environmental pollution and climate change. Waste biomass comprising of nutrient rich components has promising potential to produce value-added products for sustainable environmental solutions. This review explores the critical role of bio-based heterogeneous catalysts in enabling sustainable waste biomass utilization. In industrial chemical transformations, over 95% involve catalysts, with more than 90% being heterogeneous systems, prized for their robustness, ease of product separation, and reusability. Bio-based heterogeneous catalysts address the pressing need for sustainable waste biomass management, allowing the conversion of diverse waste biomasses into biodiesel as valuable products. Research on these catalysts, particularly for biodiesel production, has shown yields exceeding 90% with enhanced catalyst reusability. This surge in research is evident from the increasing number of published articles, notably in 2022 and 2023, highlighting growing interest and importance in the scientific community. The synthesis of these catalysts is examined, including novel approaches and techniques to enhance their efficiency, selectivity, and stability. The challenges with their feasible solutions of heterogeneous catalysts in catalyst-based processes are addressed. Altogether, this review underscores the immense potential of bio-based heterogeneous catalysts in sustainable waste biomass utilization, aligning with resource efficiency and environmental conservation goals while offering distinct insights and perspectives on the latest innovations in the field.

Synthesis and utilization of biomass-derived sulfonated heterogeneous catalyst-BT-SO3H for microalgal biodiesel production.

The study investigates the potential of utilizing banana trunk-derived porous activated biochar enriched with SO3H- as a catalyst for eco-friendly biodiesel production from the microalga Chlorella vulgaris. An extensive analysis, employing advanced techniques such as XRD, FTIR, TGA, XPS, NH3-TPD, BET, SEM-EDX, and TEM, was conducted to elucidate the physicochemical properties of BT-SO3H catalysts. The synthesized catalyst demonstrated its efficiency in converting the total lipids of Chlorella vulgaris into biodiesel, with varying concentrations of 3%, 5%, and 7%. Notably, using a 5% BT-SO3H concentration resulted in remarkably higher biodiesel production about 58.29%. Additionally, the fatty acid profile of C. vulgaris biodiesel indicated that C16:0 was the predominant fatty acid at 24.31%, followed by C18:1 (19.68%), C18:3 (11.45%), and C16:1 (7.56%). Furthermore, the biodiesel produced via 5% BT-SO3H was estimated to have higher levels of saturated fatty acids (SFAs) at 34.28%, monounsaturated fatty acids (MUFAs) at 30.70%, and polyunsaturated fatty acids (PUFAs) at 24.24%. These findings highlight the promising potential of BT-SO3H catalysts for efficient and environmentally friendly biodiesel production from microalgal species.

Biodiesel synthesis from chicken feather meal using S/AlMCM-41 catalyst and engine performance analysis.

In this study, Sulphated/AlMCM-41 (S/AlMCM-41) catalysts were synthesized and used to produce biodiesel from CFMO. Different percentages of S/AlMCM-41 catalysts were prepared and characterized by X-ray diffraction, BET studies, TPD, and SEM-EDS analysis. Sulphur incorporation to the MCM framework though reduced the surface area, and pore volume of the catalyst, sufficient acidity were produced in the catalyst surface. The existence of functional groups and the composition of the biodiesel obtained was analysed by FTIR and GC-MS. S/AlMCM-41 (80%) catalyst presented a high catalytic activity with maximum biodiesel conversion % when compared to other variants. The bio-ester produced from CFMO with S/AlMCM-41 (80%) catalyst possessed the higher calorific value of 50 MJ/kg and flashpoint of 153 °C and other properties analogous to the standard biodiesel. The engine performance was examined for biodiesel blends with neat diesel, where biodiesel blends performed better than neat diesel. The exhaust gas emission studies also highlighted that the obtained biodiesel showed emission characteristics similar to the standard biodiesel, whereas marginally higher emission for CO and CO2 of about 2.2 and 7.9% was reported.

Effect of solar powered MgO/graphene nano catalysed biodiesel production from Scomber scombrus.

The aim of the work is to find the efficiency of solar power in biodiesel preparation from mackerel fish. The paper also focusses on the ability of MgO/graphene prepared by one-pot synthesis using combustion methodology. The physicochemical properties of the material were analysed by XRD, N2 sorption studies, BET sorption analysis and SEM. The adsorption studies revealed the porosity of the graphene is intact, and the morphology studies indicated that MgO is uniformly distributed on the graphene surface. The highest biodiesel yield of 98.95% was obtained using the solar-powered Fresnel solar concentrator at 12.30 p.m in 6 min reaction time using 3 wt% MgO/GO catalyst at 65 °C. Conventional heating produced only 75% biodiesel at the same reaction condition, consuming25 min to complete. The solar assisted biodiesel had better HHV of 37.81 MJ/Kg, viscosity of 4.3 mm2/s, pour point of -15 °C, and a density of 0.875 g/mL. The optimized catalyst showed a shelf life of 5 cycles. The results portray the efficacy of natural energy source in alternative liquid fuel production.

Sustainability assessment of biofuel and value-added product from organic fraction of municipal solid waste.

The current study aims to examine the techno-economic and environmental assessment of biorefinery development within a circular bioeconomy context by using an organic fraction of municipal solid waste (OFMSW) by extraction of lipids, carbohydrates, and proteins with 98, 51 and 62 % by mass of conversion efficiency and yield recovery, and value-added fractions production as well. Fatty acid methyl ester (biodiesel) and glycerol (biofuel) were produced by applying transesterification process, and the remaining biomass was converted into biocrude oil by thermal liquefication. The biorefinery using 613 kg of OFMSW produced biodiesel, glycerol, and bioethanol with 126 litter, 14.3 kg, and 172 litter respectively, as well as value-added fractions, such as biocrude oil with 78 kg. The environmental impact was assessed using the life cycle assessment (LCA) framework, ReCiPe2016 Mid-point (H) approach, through 18 different environmental categories. The key findings elucidate that Terrestrial ecotoxicity, Climate change, Fossil depletion and Human toxicity were the main impact categories which are potentially contributed 9.81E+02 kg 1,4-DB eq., 1.43E+03 kg CO2 eq., 2.04E+02 kg oil eq., and 8.08E+01 kg 1,4-DB eq. The normalization (person per equivalent) analysis revealed that only categories of resource reduction (fossil and metal depletion) are the key contributors to environmental degradation. The biorefinery system's total revenue was estimated at USD 6.817,509 million annually. The calculated revenue was USD 0.026 million daily in a shift of 8 h. The Net present worth (NPW) was calculated at USD 499.97 million by assuming a discount factor of 10 % and inflation rate of 5 % for 15 years. The project is considered feasible by demonstrating 7.15 payback year. This research showcased the efficient portrayal of the biorefinery system and succinctly conveyed the significant circular bioeconomy for a greener future. Thus, it could be helpful to the stakeholder's context towards techno-economic and environmental evaluation.

Catalytic biodiesel production from Jatropha curcas oil: A comparative analysis of microchannel, fixed bed, and microwave reactor systems with recycled ZSM-5 catalyst.

In this study, we studied the conversion of Jatropha curcas oil to biodiesel by using three distinct reactor systems: microchannel, fixed bed, and microwave reactors. ZSM-5 was used as the catalyst for this conversion and was thoroughly characterized. X-ray diffraction was used to identify the crystalline structure, Brunauer-Emmett-Teller analysis to determine surface area, and temperature-programmed desorption to evaluate thermal stability and acidic properties. These characterizations provided crucial insights into the catalyst's structural integrity and performance under reaction conditions. The microchannel reactor exhibited superior biodiesel yield compared to the fixed bed and microwave reactors, and achieved peak efficiency at 60 °C, delivering high FAEE yield (99.7%) and conversion rates (99.92%). Ethanol catalyst volume at 1% was optimal, while varying flow rates exhibited trade-offs, emphasizing the need for nuanced control. Comparative studies against microwave and fixed-bed reactors consistently favored the microchannel reactor, emphasizing its remarkable FAME percentages, high conversion rates, and adaptability to diverse operating conditions. The zig-zag configuration enhances its efficiency, making it the optimal choice for biodiesel production and showcasing promising prospects for advancing sustainable biofuel synthesis technologies.