RESUMO
The study of exciton polarons has offered profound insights into the many-body interactions between bosonic excitations and their immersed Fermi sea within layered heterostructures. However, little is known about the properties of exciton polarons with interlayer interactions. Here, through magneto-optical reflectance contrast measurements, we experimentally investigate interlayer Fermi polarons for 2s excitons in WSe2/graphene heterostructures, where the excited exciton states (2s) in the WSe2 layer are dressed by free charge carriers of the adjacent graphene layer in the Landau quantization regime. First, such a system enables an optical detection of integer and fractional quantum Hall states (e.g., ν = ±1/3, ±2/3) of monolayer graphene. Furthermore, we observe that the 2s state evolves into two distinct branches, denoted as attractive and repulsive polarons, when graphene is doped out of the incompressible quantum Hall gaps. Our work paves the way for the understanding of the excited composite quasiparticles and Bose-Fermi mixtures.
RESUMO
Interference colors hold significant importance in optics and arts. Current methods for printing interference colors entail complex procedures and large-scale printing systems for the scarcity of inks that exhibit both sensitivity and tunability to external fields. The production of highly transparent inks capable of rendering transmissive colors has presented ongoing challenges. Here, a type of paramagnetic ink based on 2D materials that exhibit polychrome in one magnetic field is invented. By precisely manipulating the doping ratio of magnetic elements within titanate nanosheets, the magneto-optical sensitivity named Cotton-Mouton coefficient is engineerable from 728 to a record high value of 3272 m-1 T-2, with negligible influence on its intrinsic wide optical bandgap. Combined with the sensitive and controllable magneto-responsiveness of the ink, modulate and non-invasively print transmissive interference colors using small permanent magnets are precised. This work paves the way for preparing transmissive interference colors in an energy-saving and damage-free manner, which can expand its use in widespread areas.
RESUMO
The magneto-optical signatures of colloidal noble metal nanostructures, spanning both discrete nanoclusters (<2 nm) and plasmonic nanoparticles (>2 nm), exhibit rich structure-property correlations, impacting applications including photonic integrated circuits, light modulation, applied spectroscopy, and more. For nanoclusters, electron doping and single-atom substitution modify both the intensity of the magneto-optical response and the degree of transient spin polarization. Nanoparticle size and morphology also modulate the magnitude and polarity of plasmon-mediated magneto-optical signals. This intimate interplay between nanostructure and magneto-optical properties becomes especially apparent in magnetic circular dichroism (MCD) and magnetic circular photoluminescence (MCPL) spectroscopic data. Whereas MCD spectroscopy informs on a metal nanostructure's steady-state extinction properties, its MCPL counterpart is sensitive to electronic spin and orbital angular momenta of transiently excited states. This review describes the size- and structure-dependent magneto-optical properties of nanoscale metals, emphasizing the increasingly important role of MCPL in understanding transient spin properties and dynamics.
RESUMO
Hybrid structures combining ferromagnetic (FM) and semiconductor constituents have great potential for future applications in the field of spintronics. A systematic approach to study spin-dependent transport in a GaMnAs/GaAs/InGaAs quantum well (QW) hybrid structure with a few-nanometer-thick GaAs barrier is developed. It is demonstrated that a combination of spin electromotive force measurements and photoluminescence detection provides a powerful tool for studying the properties of such hybrid structures and allows the resolution of the dynamic FM proximity effect on a nanometer scale. The method can be generalized to various systems, including rapidly developing 2D van der Waals materials.
RESUMO
van der Waals heterostructures composed of two-dimensional (2D) transition metal dichalcogenides and vdW magnetic materials offer an intriguing platform to functionalize valley and excitonic properties in nonmagnetic TMDs. Here, we report magneto photoluminescence (PL) investigations of monolayer (ML) MoSe2 on the layered A-type antiferromagnetic (AFM) semiconductor CrSBr under different magnetic field orientations. Our results reveal a clear influence of the CrSBr magnetic order on the optical properties of MoSe2, such as an anomalous linear-polarization dependence, changes of the exciton/trion energies, a magnetic-field dependence of the PL intensities, and a valley g-factor with signatures of an asymmetric magnetic proximity interaction. Furthermore, first-principles calculations suggest that MoSe2/CrSBr forms a broken-gap (type-III) band alignment, facilitating charge transfer processes. The work establishes that antiferromagnetic-nonmagnetic interfaces can be used to control the valley and excitonic properties of TMDs, relevant for the development of opto-spintronics devices.
RESUMO
Magneto-optical indicator films (MOIFs) are a very useful tool for direct studies of the spatial distribution of magnetic fields and the magnetization processes in magnetic materials and industrial devices such as magnetic sensors, microelectronic components, micro-electromechanical systems (MEMS), and others. The ease of application and the possibility for direct quantitative measurements in combination with a straightforward calibration approach make them an indispensable tool for a wide spectrum of magnetic measurements. The basic sensor parameters of MOIFs, such as a high spatial resolution down to below 1 µm combined with a large spatial imaging range of up to several cm and a wide dynamic range from 10 µT to over 100 mT, also foster their application in various areas of scientific research and industry. The history of MOIF development totals approximately 30 years, and only recently have the underlying physics been completely described and detailed calibration approaches been developed. The present review first summarizes the history of MOIF development and applications and then presents the recent advances in MOIF measurement techniques, including the theoretical developments and traceable calibration methods. The latter make MOIFs a quantitative tool capable of measuring the complete vectorial value of a stray field. Furthermore, various scientific and industrial application areas of MOIFs are described in detail.
RESUMO
Chiral plasmonic nanostructures have facilitated a promising method for manipulating the polarization state of light. While a precise structural modification at the nanometer-scale-level could offer chiroptic responses at various wavelength ranges, a system that allows fast response control of a given structure has been required. In this study, we constructed uniformly arranged chiral gold helicoids with cobalt thin-film deposition that exhibited a strong chiroptic response with magnetic controllability. Tunable circular dichroism (CD) values from 0.9° to 1.5° at 550 nm wavelength were achieved by reversing the magnetic field direction. In addition, a magnetic circular dichroism (MCD) study revealed that the gap structure and size-related surface plasmon resonance induced MCD peaks. We demonstrated the transmitted color modulation, where the color dynamically changed from green-to-red, by controlling the field strength and polarizer axis. We believe current work broadens our understanding of magnetoplasmonic nanostructure and expands its potential applicability in optoelectronics or optical-communications.
Assuntos
Ouro , Ressonância de Plasmônio de Superfície , Ouro/química , Ressonância de Plasmônio de Superfície/métodos , Dicroísmo Circular , Campos Magnéticos , CobaltoRESUMO
We investigated the valley Zeeman splitting of excitonic peaks in the microphotoluminescence (µPL) spectra of high-quality hBN/WS2/MoSe2/hBN heterostructures under perpendicular magnetic fields up to 20 T. We identify two neutral exciton peaks in the µPL spectra; the lower-energy peak exhibits a reduced g-factor relative to that of the higher energy peak and much lower than the recently reported values for interlayer excitons in other van der Waals (vdW) heterostructures. We provide evidence that such a discernible g-factor stems from the spatial confinement of the exciton in the potential landscape created by the moiré pattern due to lattice mismatch or interlayer twist in heterobilayers. This renders magneto-µPL an important tool to reach a deeper understanding of the effect of moiré patterns on excitonic confinement in vdW heterostructures.
RESUMO
Active modulation of the plasmonic response is at the forefront of today's research in nano-optics. For a fast and reversible modulation, external magnetic fields are among the most promising approaches. However, fundamental limitations of metals hamper the applicability of magnetoplasmonics in real-life active devices. While improved magnetic modulation is achievable using ferromagnetic or ferromagnetic-noble metal hybrid nanostructures, these suffer from severely broadened plasmonic response, ultimately decreasing their performance. Here we propose a paradigm shift in the choice of materials, demonstrating for the first time the outstanding magnetoplasmonic performance of transparent conductive oxide nanocrystals with plasmon resonance in the near-infrared. We report the highest magneto-optical response for a nonmagnetic plasmonic material employing F- and In-codoped CdO nanocrystals, due to the low carrier effective mass and the reduced plasmon line width. The performance of state-of-the-art ferromagnetic nanostructures in magnetoplasmonic refractometric sensing experiments are exceeded, challenging current best-in-class localized plasmon-based approaches.
RESUMO
Using polarized optical and magneto-optical spectroscopy, we have demonstrated universal aspects of electrodynamics associated with Dirac nodal lines that are found in several classes of unconventional intermetallic compounds. We investigated anisotropic electrodynamics of [Formula: see text] where the spin-orbit coupling (SOC) triggers energy gaps along the nodal lines. These gaps manifest as sharp steps in the optical conductivity spectra [Formula: see text] This behavior is followed by the linear power-law scaling of [Formula: see text] at higher frequencies, consistent with our theoretical analysis for dispersive Dirac nodal lines. Magneto-optics data affirm the dominant role of nodal lines in the electrodynamics of [Formula: see text].
RESUMO
Magnetoplasmonic permittivity-near-zero (ε-near-zero) nanostructures hold promise for novel highly integrated (bio)sensing devices. These platforms merge the high-resolution sensing from the magnetoplasmonic approach with the ε-near-zero-based light-to-plasmon coupling (instead of conventional gratings or bulky prism couplers), providing a way for sensing devices with higher miniaturization levels. However, the applications are mostly hindered by tedious and time-consuming numerical analyses, due to the lack of an analytical relation for the phase-matching condition. There is, therefore, a need to develop mechanisms that enable the exploitation of magnetoplasmonic ε-near-zero nanostructures' capabilities. In this work, we developed a genetic algorithm (GA) for the rapid design (in a few minutes) of magnetoplasmonic nanostructures with optimized TMOKE (transverse magneto-optical Kerr effect) signals and magnetoplasmonic sensing. Importantly, to illustrate the power and simplicity of our approach, we designed a magnetoplasmonic ε-near-zero sensing platform with a sensitivity higher than 56∘/RIU and a figure of merit in the order of 102. These last results, higher than any previous magnetoplasmonic ε-near-zero sensing approach, were obtained by the GA intelligent program in times ranging from 2 to 5 min (using a simple inexpensive dual-core CPU computer).
Assuntos
Nanoestruturas , Algoritmos , Nanoestruturas/químicaRESUMO
Controlled insertion of electronic states within the band gap of semiconductor nanocrystals (NCs) is a powerful tool for tuning their physical properties. One compelling example is II-VI NCs incorporating heterovalent coinage metals in which hole capture produces acceptor-bound excitons. To date, the opposite donor-bound exciton scheme has not been realized because of the unavailability of suitable donor dopants. Here, we produce a model system for donor-bound excitons in CdSeS NCs engineered with sulfur vacancies (VS) that introduce a donor state below the conduction band (CB), resulting in long-lived intragap luminescence. VS-localized electrons are almost unaffected by trapping, and suppression of thermal quenching boosts the emission efficiency to 85%. Magneto-optical measurements indicate that the VS are not magnetically coupled to the NC bands and that the polarization properties are determined by the spin of the valence-band photohole, whose spin flip is massively slowed down due to suppressed exchange interaction with the donor-localized electron.
RESUMO
Fe2+ doping in II-VI semiconductors, due to the absence of energetically accessible multiple spin state configurations, has not given rise to interesting spintronic applications. In this work, we demonstrate for the first time that the interaction of homogeneously doped Fe2+ ions with the host CdS nanocrystal with no clustering is different for the two spin states and produces two magnetically inequivalent excitonic states upon optical perturbation. We combine ultrafast transient absorption spectroscopy and density functional theoretical analysis within the ground and excited states to demonstrate the presence of the magneto-optical Stark effect (MOSE). The energy gap between the spin states arising due to MOSE does not decay within the time frame of observation, unlike optical and electrical Stark shifts. This demonstration provides a stepping-stone for spin-dependent applications.
RESUMO
In a Fe/(Cd,Mg)Te/CdTe quantum well hybrid structure, short-range and long-range ferromagnetic proximity effects are found to coexist. The former is observed for conduction band electrons, while the latter is observed for holes bound to shallow acceptors in the CdTe quantum well. These effects arise from the interaction of charge carriers confined in the quantum well with different ferromagnets, where electrons interact with the Fe film and holes with an interfacial ferromagnet at the Fe/(Cd,Mg)Te interface. The two proximity effects originate from fundamentally different physical mechanisms. The short-range proximity effect for electrons is determined by the overlap of their wave functions with d-electrons of the Fe film. On the contrary, the long-range effect for holes bound to acceptors is not associated with overlapping wave functions and can be mediated by elliptically polarized phonons. The coexistence of the two ferromagnetic proximity effects reveals the presence of a nontrivial spin texture within the same heterostructure.
RESUMO
Hyperbolic metamaterials (HMM) based on multilayered metal/dielectric films or ordered arrays of metal nanorods in a dielectric matrix are extremely attractive optical materials for manipulating over the parameters of the light flow. One of the most promising tools for tuning the optical properties of metamaterialsin situis the application of an external magnetic field. However, for the case of HMM based on the ordered arrays of magneto-plasmonic nanostructures, this effect has not been clearly demonstrated until now. In this paper, we present the results of synthesis of HMM based on the highly-ordered arrays of bisegmented Au/Ni nanorods in porous anodic alumina templates and a detailed study of their optical and magneto-optical properties. Distinct enhancement of the magneto-optical (MO) effects along with their sign reversal is observed in the spectral vicinity of epsilon-near-zero and epsilon-near-pole spectral regions. The underlying mechanism is the amplification of the MO polarization plane rotation initiated by Ni segments followed by the light propagation in a strongly birefringent HMM. This stays in agreement with the phenomenological description and relevant numerical calculations.
RESUMO
We propose an all-dielectric magneto-photonic crystal with a hybrid magneto-optical response that allows for the simultaneous measurements of the surface and bulk refractive index of the analyzed substance. The approach is based on two different spectral features of the magneto-optical response corresponding to the resonances in p- and s-polarizations of the incident light. Angular spectra of p-polarized light have a step-like behavior near the total internal reflection angle which position is sensitive to the bulk refractive index. S-polarized light excites the TE-polarized optical Tamm surface mode localized in a submicron region near the photonic crystal surface and is sensitive to the refractive index of the near-surface analyte. We propose to measure a hybrid magneto-optical intensity modulation of p-polarized light obtained by switching the magnetic field between the transverse and polar configurations. The transversal component of the external magnetic field is responsible for the magneto-optical resonance near total internal reflection conditions, and the polar component reveals the resonance of the Tamm surface mode. Therefore, both surface- and bulk-associated features are present in the magneto-optical spectra of the p-polarized light.
RESUMO
In recent advanced information society, it is important to individually identify products or living organisms automatically and quickly. However, with the current identifying technology such as RFID tag or biometrics, it is difficult to apply to amphibians such as frogs or newts because of its size, stability, weakness under a wet environment and so on. Thus, this research aims to establish a system that can trace small amphibians easily even in a wet environment and keep stable sensing for a long time. The magnetism was employed for identification because it was less influenced by water for a long time. Here, a novel magnetization-free micro-magnetic tag is proposed and fabricated with low cost for installation to a living target sensed by Magneto-Optical sensor for high throughput sensing. The sensing ability of the proposed method, which was evaluated by image analysis, indicated that it was less than half of the target value (1 mm) both in the water and air. The FEM analysis showed that it is approximately twice the actual identification ability under ideal conditions, which suggests that the actual sensing ability can be extended by further improvement of the sensing system. The developed magnetization-free micro-magnetic tag can contribute to keep up the increasing demand to identify a number of samples under a wet environment especially with the development of gene technology.
Assuntos
Organismos Aquáticos/isolamento & purificação , Técnicas Biossensoriais , Dispositivos Ópticos , Organismos Aquáticos/química , Imãs , Dispositivo de Identificação por Radiofrequência , Água/químicaRESUMO
This study depicts the influence of the Rashba effect on the band-edge exciton processes in all-inorganic CsPbBr3 perovskite single colloidal nanocrystal (NC). The study is based on magneto-optical measurements carried out at cryogenic temperatures under various magnetic field strengths in which discrete excitonic transitions were detected by linearly and circularly polarized measurements. Interestingly, the experiments show a nonlinear energy splitting between polarized transitions versus magnetic field strength, indicating a crossover between a Rashba effect (at the lowest fields) to a Zeeman effect at fields above 4 T. We postulate that the Rashba effect emanates from a lattice distortion induced by the Cs+ motion degree of freedom or due to a surface effect in nanoscale NCs. The unusual magneto-optical properties shown here underscore the importance of the Rashba effect in the implementation of such perovskite materials in various optical and spin-based devices.
RESUMO
For spintronic devices excited by a sudden magnetic or optical perturbation, the torque acting on the magnetization plays a key role in its precession and damping. However, the torque itself can be a dynamical quantity via the time-dependent anisotropies of the system. A challenging problem for applications is then to disentangle the relative importance of various sources of anisotropies in the dynamical torque, such as the dipolar field, the crystal structure or the shape of the particular interacting magnetic nanostructures. Here, we take advantage of a range of colloidal cobalt ferrite nanocubes assembled in 2D thin films under controlled magnetic fields to demonstrate that the phase, ÏPrec, of the precession carries a strong signature of the dynamical anisotropies. Performing femtosecond magneto-optics, we show that ÏPrec displays a π-shift for a particular angle θH of an external static magnetic field, H. θH is controlled with the cobalt concentration, the laser intensity, as well as the interparticle interactions. Importantly, it is shown that the shape anisotropy, which strongly departs from those of equivalent bulk thin films or individual noninteracting nanoparticles, reveals the essential role played by the interparticle collective effects. This work shows the reliability of a noninvasive optical approach to characterize the dynamical torque in high density magnetic recording media made of organized and interacting nanoparticles.
RESUMO
The growing availability of biomarker panels for molecular diagnostics is leading to an increasing need for fast and sensitive biosensing technologies that are applicable to point-of-care testing. In that regard, homogeneous measurement principles are especially relevant as they usually do not require extensive sample preparation procedures, thus reducing the total analysis time and maximizing ease-of-use. In this review, we focus on homogeneous biosensors for the in vitro detection of biomarkers. Within this broad range of biosensors, we concentrate on methods that apply magnetic particle labels. The advantage of such methods lies in the added possibility to manipulate the particle labels by applied magnetic fields, which can be exploited, for example, to decrease incubation times or to enhance the signal-to-noise-ratio of the measurement signal by applying frequency-selective detection. In our review, we discriminate the corresponding methods based on the nature of the acquired measurement signal, which can either be based on magnetic or optical detection. The underlying measurement principles of the different techniques are discussed, and biosensing examples for all techniques are reported, thereby demonstrating the broad applicability of homogeneous in vitro biosensing based on magnetic particle label actuation.