Achieving Fast and Stable Sodium Storage in Na4Fe3(PO4)2(P2O7) via Entropy Engineering.

Na4Fe3(PO4)2(P2O7) (NFPP) has been considered a promising cathode material for sodium-ion batteries (SIBs) owing to its environmental friendliness and economic viability. However, its electrochemical performance is constrained by connatural low electronic conductivity and inadequate sodium ion diffusion. Herein, a high-entropy substitution strategy is employed in NFPP to address these limitations. Ex situ X-ray diffraction analysis reveals a single-phase electrochemical reaction during the sodiation/desodiation processes and the increased configurational entropy in HE-NFPP endows an enhanced structure, which results in a minimal volume variation of only 1.83%. Kinetic analysis and density functional theory calculation further confirm that the orbital hybrid synergy of high-entropy transition metals offers a favorable electronic structure, which efficaciously boosts the charge transfer kinetics and optimizes the sodium ion diffusion channel. Based on this versatile strategy, the as-prepared high-entropy Na4Fe2.5Mn0.1Mg0.1Co0.1Ni0.1Cu0.1(PO4)2(P2O7) (HE-NFPP) cathode can deliver a prominent rate performance of 55 mAh g-1 at 10 A g-1 and an ultra-long cycling lifespan of over 18 000 cycles at 5 A g-1. When paired with a hard carbon (HC) anode, HE-NFPP//HC full cell exhibits a favorable cycling durability of 1000 cycles. This high-entropy engineering offers a feasible route to improve the electrochemical performance of NFPP and provides a blueprint for exploring high-performance SIBs.

Hollow Core-Shelled Na4Fe2.4Ni0.6(PO4)2P2O7 with Tiny-Void Space Capable Fast-Charge and Low-Temperature Sodium Storage.

Iron-based mixed polyanion phosphate Na4Fe3(PO4)2P2O7 (NFPP) is recognized as a promising cathode for Sodium-ion Batteries (SIBs) due to its low cost and environmental friendliness. However, its inherent low conductivity and sluggish Na+ diffusion limit fast charge and low-temperature sodium storage. This study pioneers a scalable synthesis of hollow core-shelled Na4Fe2.4Ni0.6(PO4)2P2O7 with tiny-void space (THoCS-0.6Ni) via a one-step spray-drying combined with calcination process due to the different viscosity, coordination ability, molar ratios, and shrinkage rates between citric acid and polyvinylpyrrolidone. This unique structure with interconnected carbon networks ensures rapid electron transport and fast Na+ diffusion, as well as efficient space utilization for relieving volume expansion. Incorporating regulation of lattice structure by doping Ni heteroatom to effectively improve intrinsic electron conductivity and optimize Na+ diffusion path and energy barrier, which achieves fast charge and low-temperature sodium storage. As a result, THoCS-0.6Ni exhibits superior rate capability (86.4 mAh g-1 at 25 C). Notably, THoCS-0.6Ni demonstrates exceptional cycling stability at -20 °C with a capacity of 43.6 mAh g-1 after 2500 cycles at 5 C. This work provides a universal strategy to design the hollow core-shelled structure with tiny-void space cathode materials for reversible batteries with fast-charge and low-temperature Na-storage features.

Rapid mechanochemical synthesis of high-performance Na4Fe2.94Al0.04(PO4)2(P2O7)/C cathode material for sodium-ion storage.

Na4Fe3(PO4)2(P2O7) is regarded as a promising cathode material for sodium-ion batteries due to its affordability, non-toxic nature, and excellent structural stability. However, its electrochemical performance is hampered by its poor electronic conductivity. Meanwhile, most of the previous studies utilized spray-drying and sol-gel methods to synthesize Na4Fe3(PO4)2(P2O7), and the large-scale synthesis of the cathode material is still challenging. This study presents a composite cathode material, Na4Fe2.94Al0.04(PO4)2(P2O7)/C, prepared via a straightforward ball-milling technique. By substituting Al3+ minimally into the Fe2+ site of NFPP, Fe defects are introduced into the structure, hindering the formation of NaFePO4 and thereby enhancing Na-ion diffusion kinetics and conductivity. Additionally, the average length of AlO bonds (2.18 Å) is slightly smaller than that of FeO bonds (2.19 Å), contributing to the superior structural stability. The smaller ionic radii of Al3+ induce lattice contraction, further enhancing the structural stability. Moreover, the surface of material particles is coated with a thin layer of carbon, ensuring excellent electrical conductivity and outstanding structure stability. As a result, the Na4Fe2.94Al0.04(PO4)2(P2O7)/C cathode exhibits excellent electrochemical performance, leading to high discharge capacity (128.1 mAh g-1 at 0.2 C), outstanding rate performance (98.1 mAh g-1 at 10 C), and long cycle stability (83.7 % capacity retention after 3000 cycles at 10 C). This study demonstrates a low-cost, ultra-stable, and high-rate cathode material prepared by simple mechanical activation for sodium-ion batteries which has application prospects for large-scale production.

Carbon-Based Composites with Mixed Phosphate-Pyrophosphates with Improved Electrochemical Performance at Elevated Temperature.

Sodium iron phosphate-pyrophosphate, Na4Fe3(PO4)2P2O7 (NFPP) emerges as an excellent cathode material for sodium-ion batteries. Because of lower electronic conductivity, its electrochemical performance depends drastically on the synthesis method. Herein, we provide a simple and unified method for synthesis of composites between NFPP and reduced graphene oxide (rGO) and standard carbon black, designed as electrode materials for both sodium- and lithium-ion batteries. The carbon additives affect only the morphology and textural properties of the composites. The performance of composites in sodium and lithium cells is evaluated at elevated temperatures. It is found that NFPP/rGO outperforms NFPP/C in both Na and Li storage due to its hybrid mechanism of energy storage. In sodium half-cells, NFPP/rGO delivers a reversible capacity of 95 mAh/g at 20 °C and 115 mAh/g at 40 °C with a cycling stability of 95% and 88% at a rate of C/2. In lithium half-cells, the capacity reaches a value of 120 mAh/g at 20 and 40 °C, but the cycling stability becomes worse, especially at 40 °C. The electrochemical performance is discussed on the basis of ex situ XRD and microscopic studies. The good Na storage performance of NFPP/rGO at an elevated temperature represents a first step towards its commercialization.