High Efficiency Breathable Thermoelectric Skin Using Multimode Radiative Cooling/Solar Heating Assisted Large Thermal Gradient.

This study proposes a Janus structure-based stretchable and breathable thermoelectric skin with radiative cooling (RC) and solar heating (SH) functionalities for sustainable energy harvesting. The challenge of the wearable thermoelectric generator arises from the small temperature difference. Thus, this dual-sided structure maximizes the thermal gradient between the body and the surrounding environment, unlike the previous works that rather concentrate on the efficiency of the thermoelectric generator itself. The Janus structure allows the device to switch to the other mode, optimizing electricity generation from a given weather condition. For these functionalities, for the first time, boron nitride-polydimethylsiloxane (BP) and graphene nanoplatelet-polydimethylsiloxane (GP) nanofiber (NF) are developed as substrates. The BP NF generates the RC capability of ΔTcooling  = 4 °C, and the high solar absorbance of the GP NF enables it to be photothermally heated. The flip-overable thermoelectric skin (FoTES) achieves a maximum power output (Pmax ) of 5.73 µW cm-2 in RC mode, surpassing SH mode by 5.55 µW cm-2 in the morning. In the afternoon, it generates a Pmax of 18.59 µW cm-2 in SH mode, outperforming RC mode by 15.56 µW cm-2 . This work contributes to the advancement of wearable electronics, offering a sustainable power source in a wearable form.

Enhancing Sustainable Energy Conversion Efficiency by Incorporating Photoelectric Responsiveness into Multiporous Ionic Membrane.

The evolution of porous membranes has revitalized their potential application in sustainable osmotic-energy conversion. However, the performance of multiporous membranes deviates significantly from the linear extrapolation of single-pore membranes, primarily due to the occurrence of ion-concentration polarization (ICP). This study proposes a robust strategy to overcome this challenge by incorporating photoelectric responsiveness into permselective membranes. By introducing light-induced electric fields within the membrane, the transport of ions is accelerated, leading to a reduction in the diffusion boundary layer and effectively mitigating the detrimental effects of ICP. The developed photoelectric-responsive covalent-organic-framework membranes exhibit an impressive output power density of 69.6 W m-2 under illumination, surpassing the commercial viability threshold by ≈14-fold. This research uncovers a previously unexplored benefit of integrating optical electric conversion with reverse electrodialysis, thereby enhancing energy conversion efficiency.

External Support for Solar-Powered Water Pumping Systems in Rural Areas: A Systematic Review.

The Sustainable Development Goals emphasize coordination and integration between sectors. Solar-powered submersible water pumping systems are versatile technology that help address community drinking water, irrigation, and electricity needs. Stakeholders external to the community, particularly solar photovoltaic experts, are vital in ensuring continued system services; however, there has been no comprehensive assessment of different solar-powered water pumping system support efforts. This review is the first to systematically evaluate external support for solar-powered systems from multiple regions and implementing organizations. We reviewed solar-powered water pumping system literature to identify implemented external support and factors that affect implementation. Publication databases, organization Web sites, and citations were searched. Seventy-four studies were included and evaluated using inductive coding and thematic synthesis. We derived a framework that organized support activities and factors into three nested levels of implementation: system, program, and sector. For support efforts implemented after 2010, most support providers worked at all levels. Each provider type worked at levels aligned with their knowledge and resources and complementary to other providers' work. Drivers of support specific to solar-powered water systems were the existence of solar photovoltaic markets and infrastructure, support providers experienced with solar photovoltaics, and government and community solar advocates. We grouped support factors that study authors associated with system functionality into four categories: location and quality of support, reliability of support arrangements, frequency and timeliness of support, and policy and regulatory environment. No study outlined support for multiple uses of the systems or end-of-lifecycle care of solar panels. Solar-powered water pumping systems provide multiple community services, and their management will be bolstered by support providers collaborating to optimally apply their skill sets and create support plans that comprehensively address system versatility.

Carbon dioxide and hydrogen as building blocks for a sustainable interface of energy and chemistry.

Hydrogen as energy vector from renewable sources and carbon dioxide as carbon source are central elements of a future sustainable interface between energy and chemistry. While often viewed merely as "substitutes" for fossil resources, the current article discusses opportunities to open new synthetic pathways and to generate novel molecular architectures for the delivery of the same or even improved functionalities expected from chemical products. Catalysis is the key science and technology in this endeavour and three general principles for the desing of catalytic systems are proposed as guidelines for fundamental research. This article is part of the discussion meeting issue 'Green carbon for the chemical industry of the future'.

Biohydrogen from waste feedstocks: An energy opportunity for decarbonization in developing countries.

In developing economies, the decarbonization of energy sector has become a global priority for sustainable and cleaner energy system. Biohydrogen production from renewable sources of waste biomass is a good source of energy incentive that reduces the pollution. Biohydrogen has a high calorific value and emits no emissions, producing both energy security and environmental sustainability. Biohydrogen production technologies have become one of the main renewable sources of energy. The present paper entails the role of biohydrogen recovered from waste biomasses like agricultural waste (AW), organic fraction of municipal solid waste (OFMSW), food processing industrial waste (FPIW), and sewage sludge (SS) as a promising solution. The main sources of increasing yield percentage of biohydrogen generation from waste feedstock using different technologies, and process parameters are also emphasized in this review. The production paths for biohydrogen are presented in this review article, and because of advancements in R and D, biohydrogen has gained viability as a biofuel for the future and discusses potential applications in power generation, transportation, and industrial processes, emphasizing the versatility and potential for integration into existing energy infrastructure. The investigation of different biochemical technologies and methods for producing biohydrogen, including anaerobic digestion (AD), dark fermentation (DF), photo fermentation (PF), and integrated dark-photo fermentation (IDPF), has been overviewed. This analysis also discusses future research, investment, and sustainable energy options transitioning towards a low-carbon future, as well as potential problems, economic impediments, and policy-related issues with the deployment of biohydrogen in emerging nations.

Antibiotic synergistic effect surge bioenergy potential and pathogen resistance of Chlorella variabilis biofilm.

Tetracycline (TC) and ciprofloxacin (CF) induce a synergistic effect that alters the biochemical composition, leading to a decrease in the growth and photosynthetic efficiency of microalgae. But the current study provides a novel insight into stress-inducing techniques that trigger a change in macromolecules, leading to an increase in the bioenergy potential and pathogen resistance of Chlorella variabilis biofilm. The study revealed that in a closed system, a light intensity of 167 µmol/m2/s causes 93.5% degradation of TC and 16% degradation of CF after 7 days of exposure, hence availing the products for utilization by C. variabilis biofilm. The resistance to pathogens invasion was linked to 85% and 40% increase in the expression level of photosystem II oxygen-evolving enhancer protein 3 (PsbQ), and mitogen activated kinase (MAK) respectively. The results also indicate that a surge in light intensity triggers 49% increase in the expression level of lysophosphatidylcholine (LPC) (18:2), which is an important lipidomics that can easily undergo transesterification into bioenergy. The thermogravimetric result indicates that the biomass sample of C. variabilis biofilm cultivated under light intensity of 167 µmol/m2/s produces a higher residual mass of 45.5% and 57.5 under air and inert conditions, respectively. The Fourier transform infrared (FTIR) indicates a slight shift in the major functional groups, while the energy-dispersive X-ray spectroscopy (SEM-EDS) and X-ray fluorescence (XRF) indicate clear differences in the morphology and elemental composition of the biofilm biomass in support of the increase bioenergy potential of C. variabilis biofilm. The current study provides a vital understanding of a innovative method of cultivation of C. variabilis biofilm, which is resistant to pathogens and controls the balance between fatty acid and TAG synthesis leading to surge in bioenergy potential and environmental sustainability.

Isolation of delignifying bacteria and optimization of microbial pretreatment of biomass for bioenergy.

Microbial pretreatment of lignocellulosic biomass holds significant promise for environmentally friendly biofuel production, offering an alternative to fossil fuels. This study focused on the isolation and characterization of two novel delignifying bacteria, GIET1 and GIET2, to enhance cellulose accessibility by lignin degradation. Molecular characterization confirmed their genetic identities, providing valuable microbial resources for biofuel production. Our results revealed distinct preferences for temperature, pH, and incubation period for the two bacteria. Bacillus haynesii exhibited optimal performance under moderate conditions and shorter incubation period, making it suitable for rice straw and sugarcane bagasse pretreatment. In contrast, Paenibacillus alvei thrived at higher temperatures and slightly alkaline pH, requiring a longer incubation period ideal for corn stalk pretreatment. These strain-specific requirements highlight the importance of tailoring pretreatment conditions to specific feedstocks. Structural, chemical, and morphological analyses demonstrated that microbial pretreatment reduced the amorphous lignin, increasing cellulose crystallinity and accessibility. These findings underscore the potential of microbial pretreatment to enhance biofuel production by modifying the lignocellulosic biomass. Such environmentally friendly bioconversion processes offer sustainable and cleaner energy solutions. Further research to optimize these methods for scalability and broader application is necessary in the pursuit for more efficient and greener biofuel production.

Nano-based biofuel production from low-cost lignocellulose biomass: environmental sustainability and economic approach.

The use of nanomaterials in biofuel production from lignocellulosic biomass offers a promising approach to simultaneously address environmental sustainability and economic viability. This review provides an overview of the environmental and economic implications of integrating nanotechnology into biofuel production from low-cost lignocellulosic biomass. In this review, we highlight the potential benefits and challenges of nano-based biofuel production. Nanomaterials provide opportunities to improve feedstock pretreatment, enzymatic hydrolysis, fermentation, and catalysis, resulting in enhanced process efficiency, lower energy consumption, and reduced environmental impact. Conducting life cycle assessments is crucial for evaluating the overall environmental footprint of biofuel production. An economic perspective that focuses on the cost implications of utilizing nanomaterials in biofuel production is also discussed. A comprehensive understanding of both environmental and economic dimensions is essential to fully harness the potential of nanomaterials in biofuel production from lignocellulosic biomass and to move towards sustainable future energy.

Enhancing Cybersecurity in Distributed Microgrids: A Review of Communication Protocols and Standards.

The effective operation of distributed energy sources relies significantly on the communication systems employed in microgrids. This article explores the fundamental communication requirements, structures, and protocols necessary to establish a secure connection in microgrids. This article examines the present difficulties facing, and progress in, smart microgrid communication technologies, including wired and wireless networks. Furthermore, it evaluates the incorporation of diverse security methods. This article showcases a case study that illustrates the implementation of a distributed cyber-security communication system in a microgrid setting. The study concludes by emphasizing the ongoing research endeavors and suggesting potential future research paths in the field of microgrid communications.

Sustainable energy solutions: Well retrofit analysis and emission reduction for a net-zero future in the Intermountain West, United States of America.

To achieve net-zero emissions by 2050, we need economic means of sequestering carbon dioxide (CO2) and reducing greenhouse gas emissions (GHG). We analyze the sequestration potential of the Intermountain West (I-West) region, US, as a primary energy transition hub through analysis of wellbore retrofit potential and emission reduction in both fugitive gas abatement and flare gas. We selected the I-West region due to its abundant energy sources and oil and gas production legacy. Preliminary analysis hints that well retrofits can breathe new life into a well at a fraction of the cost of a new drill. With millions of potential candidates in the US, even a modest fraction (1% or less) suitable for retrofit could accelerate the shift to large-scale CO2 sequestration. Fugitive gas, the unintentional release of wellbore gases such as methane, is a significant emissions source. Through conservative analysis, it is estimated that wellhead leakage alone may account for 5 million tonnes of carbon dioxide equivalent (CO2e) emissions. We conclude by assessing the CO2 emissions from flaring, which is the burning of associated gas during well operations, conservative analysis indicates flaring contributes another 2 million tonnes of CO2 emissions to the region. We find that with targeted retrofit and better controls on emissions sources, the I-West region can make a significant impact in the nation's push to become net-zero. This study outlines economic feasibility and actionable items to achieve the critical reductions in emissions and increases in sequestration necessary to attain net zero.

Synergistic sustainability: Future potential of integrating produced water and CO2 for enhanced carbon capture, utilization, and storage (CCUS).

Produced water (PW) and carbon dioxide (CO2) are traditionally considered waste streams the oil and gas industry and other sectors generate. However, these waste products are examples of "waste to wealth" products with a dual nature of being valuable products or disposable byproducts. PW contains various elements and compounds that can be extracted and used in the manufacturing or chemical processing industry. Concentrated brine is generated from PW and can be used as feedstock in chemical processes. On the other hand, excess CO2 produced in various industrial processes needs to be sequestered either through non-conversion processes, such as enhanced oil recovery and storage in geological formations, or through CO2 conversion processes into fuels, polymers, and chemicals. While there is growing interest in reusing these products individually, no studies have explored the opportunities for producing additional chemicals or valuable products by combining CO2 and PW waste streams (CO2-PW). This study identifies the potential resources that can be generated by combining the beneficial reuse of PW and CO2 conversion processes. CO2-PW chemical conversion presents an opportunity to expand the carbon capture, utilization, and storage (CCUS) mix while reducing the environmental impact of disposing of these byproducts. The advantages of utilizing these waste streams for diverse applications are linked with the sustainable management of PW and decarbonization, contributing positively to a more responsible approach to resource management and climate change mitigation.

An electricity market-based approach to finance environmental flow restoration.

As environmental flow demands become better characterized, improved water allocation and reservoir operating solutions can be devised to meet them. However, significant economic trade-offs are still expected, especially in hydropower-dominated basins. This study explores the use of the electricity market as both an institutional arrangement and an alternative financing source to handle the costs of implementing environmental flows in river systems managed for hydropower benefits. A framework is proposed to identify hydropower plants with sustainable operation within the portfolio of power sources, including a cost-sharing mechanism based on the electricity market trading to manage a time-step compensation fund. The objective is to address a common limitation in the implementation of environmental flows by reducing the dependence on government funding and the necessity for new arrangements. Compensation amounts can vary depending on ecosystem restoration goals (level of flow regime restoration), hydrological conditions, and hydropower sites characteristics. The application in the Paraná River Basin, Brazil, shows basin-wide compensation requirements ranging from zero in favorable hydrological years to thousands of dollars per gigawatt-hour generated in others. Each electricity consumer's contribution to the compensation fund is determined by their share of energy consumption, resulting in values ranging from cents for residential users to thousands of dollars for industrial facilities. Finally, the compensation fund signals the economic value of externalities in energy production. For residential users, achieving varying levels of ecosystem restoration led to an electricity bill increase of less than 1 %. For larger companies, the increase ranged from less than 1 %-12 %.

Exploring the Potential of Microbial Coalbed Methane for Sustainable Energy Development.

By allowing coal to be converted by microorganisms into products like methane, hydrogen, methanol, ethanol, and other products, current coal deposits can be used effectively, cleanly, and sustainably. The intricacies of in situ microbial coal degradation must be understood in order to develop innovative energy production strategies and economically viable industrial microbial mining. This review covers various forms of conversion (such as the use of MECoM, which converts coal into hydrogen), stresses, and in situ use. There is ongoing discussion regarding the effectiveness of field-scale pilot testing when translated to commercial production. Assessing the applicability and long-term viability of MECoM technology will require addressing these knowledge gaps. Developing suitable nutrition plans and utilizing lab-generated data in the field are examples of this. Also, we recommend directions for future study to maximize methane production from coal. Microbial coal conversion technology needs to be successful in order to be resolved and to be a viable, sustainable energy source.

Research Progress in Enzyme Biofuel Cells Modified Using Nanomaterials and Their Implementation as Self-Powered Sensors.

Enzyme biofuel cells (EBFCs) can convert chemical or biochemical energy in fuel into electrical energy, and therefore have received widespread attention. EBFCs have advantages that traditional fuel cells cannot match, such as a wide range of fuel sources, environmental friendliness, and mild reaction conditions. At present, research on EBFCs mainly focuses on two aspects: one is the use of nanomaterials with excellent properties to construct high-performance EBFCs, and the other is self-powered sensors based on EBFCs. This article reviews the applied nanomaterials based on the working principle of EBFCs, analyzes the design ideas of self-powered sensors based on enzyme biofuel cells, and looks forward to their future research directions and application prospects. This article also points out the key properties of nanomaterials in EBFCs, such as electronic conductivity, biocompatibility, and catalytic activity. And the research on EBFCs is classified according to different research goals, such as improving battery efficiency, expanding the fuel range, and achieving self-powered sensors.

Recent Development Strategies for Bismuth-Driven Materials in Sustainable Energy Systems and Environmental Restoration.

Bismuth(Bi)-based materials have gained considerable attention in recent decades for use in a diverse range of sustainable energy and environmental applications due to their low toxicity and eco-friendliness. Bi materials are widely employed in electrochemical energy storage and conversion devices, exhibiting excellent catalytic and non-catalytic performance, as well as CO2 /N2 reduction and water treatment systems. A variety of Bi materials, including its oxides, chalcogenides, oxyhalides, bismuthates, and other composites, have been developed for understanding their physicochemical properties. In this review, a comprehensive overview of the properties of individual Bi material systems and their use in a range of applications is provided. This review highlights the implementation of novel strategies to modify Bi materials based on morphological and facet control, doping/defect inclusion, and composite/heterojunction formation. The factors affecting the development of different classes of Bi materials and how their control differs between individual Bi compounds are also described. In particular, the development process for these material systems, their mass production, and related challenges are considered. Thus, the key components in Bi compounds are compared in terms of their properties, design, and applications. Finally, the future potential and challenges associated with Bi complexes are presented as a pathway for new innovations.

Advances in technology and utilization of natural resources for achieving carbon neutrality and a sustainable solution to neutral environment.

The greatest environmental issue of the twenty-first century is climate change. Human-caused greenhouse gas emissions are increasing the frequency of extreme weather. Carbon dioxide (CO2) accounts for 80% of human greenhouse gas emissions. However, CO2 emissions and global temperature have risen steadily from pre-industrial times. Emissions data are crucial for most carbon emission policymaking and goal-setting. Sustainable and carbon-neutral sources must be used to create green energy and fossil-based alternatives to reduce our reliance on fossil fuels. Near-real-time monitoring of carbon emissions is a critical national concern and cutting-edge science. This review article provides an overview of the many carbon accounting systems that are now in use and are based on an annual time frame. The primary emphasis of the study is on the recently created carbon emission and eliminating sources and technology, as well as the current application trends for carbon neutrality. We also propose a framework for the most advanced naturally available carbon neutral accounting sources capable of being implemented on a large scale. Forming relevant data and procedures will help the "carbon neutrality" plan decision-making process. The formation of pertinent data and methodologies will give robust database support to the decision-making process for the "carbon neutrality" plan for the globe. In conclusion, this article offers some opinions, opportunities, challenges and future perspectives related to carbon neutrality and carbon emission monitoring and eliminating resources and technologies.

Sustainable production of biofuels from the algae-derived biomass.

The worldwide fossil fuel reserves are rapidly and continually being depleted as a result of the rapid increase in global population and rising energy sector needs. Fossil fuels should not be used carelessly since they produce greenhouse gases, air pollution, and global warming, which leads to ecological imbalance and health risks. The study aims to discuss the alternative renewable energy source that is necessary to meet the needs of the global energy industry in the future. Both microalgae and macroalgae have great potential for several industrial applications. Algae-based biofuels can surmount the inadequacies presented by conventional fuels, thereby reducing the 'food versus fuel' debate. Cultivation of algae can be performed in all three systems; closed, open, and hybrid frameworks from which algal biomass is harvested, treated and converted into the desired biofuels. Among these, closed photobioreactors are considered the most efficient system for the cultivation of algae. Different types of closed systems can be employed for the cultivation of algae such as stirred tank photobioreactor, flat panel photobioreactor, vertical column photobioreactor, bubble column photobioreactor, and horizontal tubular photobioreactor. The type of cultivation system along with various factors, such as light, temperature, nutrients, carbon dioxide, and pH affect the yield of algal biomass and hence the biofuel production. Algae-based biofuels present numerous benefits in terms of economic growth. Developing a biofuel industry based on algal cultivation can provide us with a lot of socio-economic advantages contributing to a publicly maintainable result. This article outlines the third-generation biofuels, how they are cultivated in different systems, different influencing factors, and the technologies for the conversion of biomass. The benefits provided by these new generation biofuels are also discussed. The development of algae-based biofuel would not only change environmental pollution control but also benefit producers' economic and social advancement.

Enzymatic and Bioinspired Systems for Hydrogen Production.

The extraordinary potential of hydrogen as a clean and sustainable fuel has sparked the interest of the scientific community to find environmentally friendly methods for its production. Biological catalysts are the most attractive solution, as they usually operate under mild conditions and do not produce carbon-containing byproducts. Hydrogenases promote reversible proton reduction to hydrogen in a variety of anoxic bacteria and algae, displaying unparallel catalytic performances. Attempts to use these sophisticated enzymes in scalable hydrogen production have been hampered by limitations associated with their production and stability. Inspired by nature, significant efforts have been made in the development of artificial systems able to promote the hydrogen evolution reaction, via either electrochemical or light-driven catalysis. Starting from small-molecule coordination compounds, peptide- and protein-based architectures have been constructed around the catalytic center with the aim of reproducing hydrogenase function into robust, efficient, and cost-effective catalysts. In this review, we first provide an overview of the structural and functional properties of hydrogenases, along with their integration in devices for hydrogen and energy production. Then, we describe the most recent advances in the development of homogeneous hydrogen evolution catalysts envisioned to mimic hydrogenases.

Decarbonising distilled spirits: An assessment of the potential associated with anaerobic digestion of by-products at nine operational distilleries.

This work aims to assess the potential biogas resource of by-products from the production of distilled spirits at 9 operational distilleries in 7 countries. An additional objective was the calculation of the energy resource and Scope 1 greenhouse gas (GHG) emission savings from the use of 21 by-products from the distilleries as a feedstock for anaerobic digestion (AD). To present a holistic perspective on the integration of AD with distilleries, an overview of additional criteria to be considered was provided. The biochemical methane potential (BMP) of the by-products associated with a selection of distilled spirits was experimentally determined. The BMP ranged from 161 L methane per kg volatile solid (LCH4/kgVS) to 589 LCH4/kgVS with an average value of 332 LCH4/kgVS. Biogas could reduce distillery fossil fuel demand by 49% when produced from un-processed by-products, by 66% when produced from a mixture of separated by-products, by 16% when produced from concentrated by-products and by 13% when produced from liquid by-products. The average Scope 1 GHG emission saving when using un-processed by-products was 52%, a mix of separated by-products allowed for a reduction of 66%, liquid by-products achieved an average reduction of 14%, and the use of concentrated by-products reduced GHG emissions by 17% on average. When evaluating which distilleries are "of most interest" for the integration of AD, other criteria to be considered include: by-product properties, the size of the AD facility required, the quantity of digestate produced, and the location of the distilleries in terms of both land availability to construct the AD facility and the proximity to land on which to spread digestate.

Promising M2CO2/MoX2 (M = Hf, Zr; X = S, Se, Te) Heterostructures for Multifunctional Solar Energy Applications.

Two-dimensional van der Waals (vdW) heterostructures are potential candidates for clean energy conversion materials to address the global energy crisis and environmental issues. In this work, we have comprehensively studied the geometrical, electronic, and optical properties of M2CO2/MoX2 (M = Hf, Zr; X = S, Se, Te) vdW heterostructures, as well as their applications in the fields of photocatalytic and photovoltaic using density functional theory calculations. The lattice dynamic and thermal stabilities of designed M2CO2/MoX2 heterostructures are confirmed. Interestingly, all the M2CO2/MoX2 heterostructures exhibit intrinsic type-II band structure features, which effectively inhibit the electron-hole pair recombination and enhance the photocatalytic performance. Furthermore, the internal built-in electric field and high anisotropic carrier mobility can separate the photo-generated carriers efficiently. It is noted that M2CO2/MoX2 heterostructures exhibit suitable band gaps in comparison to the M2CO2 and MoX2 monolayers, which enhance the optical-harvesting abilities in the visible and ultraviolet light zones. Zr2CO2/MoSe2 and Hf2CO2/MoSe2 heterostructures possess suitable band edge positions to provide the competent driving force for water splitting as photocatalysts. In addition, Hf2CO2/MoS2 and Zr2CO2/MoS2 heterostructures deliver a power conversion efficiency of 19.75% and 17.13% for solar cell applications, respectively. These results pave the way for exploring efficient MXenes/TMDCs vdW heterostructures as photocatalytic and photovoltaic materials.