Skeletal Class III phenotype: Link between animal models and human genetics: A scoping review.

This study aimed to identify evidence from animal studies examining genetic variants underlying maxillomandibular discrepancies resulting in a skeletal Class III (SCIII) malocclusion phenotype. Following the Manual for Evidence Synthesis of the JBI and the PRISMA extension for scoping reviews, a participant, concept, context question was formulated and systematic searches were executed in the PubMed, Scopus, WOS, Scielo, Open Gray, and Mednar databases. Of the 779 identified studies, 13 met the selection criteria and were included in the data extraction. The SCIII malocclusion phenotype was described as mandibular prognathism in the Danio rerio, Dicentrarchus labrax, and Equus africanus asinus models; and as maxillary deficiency in the Felis silvestris catus, Canis familiaris, Salmo trutta, and Mus musculus models. The identified genetic variants highlight the significance of BMP and TGF-ß signaling. Their regulatory pathways and genetic interactions link them to cellular bone regulation events, particularly ossification regulation of postnatal cranial synchondroses. In conclusion, twenty genetic variants associated with the skeletal SCIII malocclusion phenotype were identified in animal models. Their interactions and regulatory pathways corroborate the role of these variants in bone growth, differentiation events, and ossification regulation of postnatal cranial synchondroses.

Fat mass and obesity-associated protein (FTO) affects midpalatal suture bone remodeling during rapid maxillary expansion.

BACKGROUND: The fat mass and obesity-associated protein (FTO) is an RNA demethylase that contributes to several physiological processes. Nonetheless, the impact of FTO on bone remodeling in the midpalatal suture while undergoing rapid maxillary expansion (RME) remains unclear. METHODS: First, to explore the expression of FTO in the midpalatal suture during RME, six rats were randomly divided into two groups: Expansion group and Sham group (springs without being activated). Then, suture mesenchymal stem cells (SuSCs) were isolated as in vitro model. The expression of FTO was knocked down by small interfering RNA to study the effect of FTO on the osteogenic differentiation of SuSCs. Finally, to evaluate the function of FTO in the process of bone remodeling in the midpalatal suture, ten rats were randomly divided into two groups: FB23-2 group (10 µM, a small molecule inhibitor of FTO) and DMSO group (control). RESULTS: Increased arch width and higher expression of OCN and FTO in the midpalatal area were observed in expansion group (P < .05). In the in vitro model, the mRNA expression levels of Runx2, Bmp2, Col1a1, Spp1, and Tnfrsf11b were decreased (P < .05) upon knocking down FTO. Additionally, the protein levels of RUNX2 and OPN were also decreased (P < 0.05). Adding FB23-2, a small-molecule inhibitor targeting FTO, to the medium of SuSCs caused a decrease in the mRNA expression levels of Runx2, Bmp2, Col1a1, Spp1, and Tnfrsf11b (P < 0.05). There was a statistically significant difference in evaluating the expression of OCN and OPN on the palatal suture between the FB23-2 and DMSO groups (P < .05). LIMITATION: The molecular mechanisms by which FTO regulates SuSCs osteogenesis remain to be elucidated. The FTO conditional knock out mouse model can be established to further elucidate the role of FTO during RME. CONCLUSION: FTO contributes to the osteogenic differentiation of SuSCs and plays a promoting role in midpalatal suture bone remodeling during the RME.

Polygraphic evaluation of the effects of different rapid maxillary expansion appliances on sleep quality: A randomized clinical trial.

BACKGROUND: The purpose of this clinical study was to assess the effects of different rapid maxillary expansion appliances on the severity of obstructive sleep apnea (OSA). MATERIAL AND METHODS: Patients having a narrow maxilla and identified with OSA were divided randomly into three groups: tooth tissue-borne, tooth-borne, and bone-borne expanders. Changes in sleep parameters at baseline and 3-month follow-up detected by polygraphy were the primary outcome. Treatment of the crossbite was the secondary outcome. Dunn-Bonferroni tests, Kruskal-Wallis, and Wilcoxon analysis were applied for intra- and inter-group differences at p < 0.05 significance level. RESULTS: Among 46 patients randomized, apnea-hypopnea index (AHI) changed from baseline to follow-up in all groups (- 1.6, p = 0.280; 0.6, p = 0.691; - 0.45, p = 0.796, respectively), with no between-group difference (p = 0.631). Oxygen desaturation index (ODI) altered from baseline to follow-up in all groups (0.80, p = 0.977; 0.20, p = 0.932; and - 1.00, p = 0.379, respectively), with no between-group difference (p = 0.858). There was no significant difference in minimum oxygen saturation from baseline to follow-up in all groups (0.00, p = 0.401; - 2.00, p = 0.887; 0.50, p = 0.407, respectively). No significant changes were observed in supine AHI from baseline to follow-up in all groups (0.00, p = 0.581; - 1.00, p = 0.393; 0.00, p = 0.972, respectively). The upper intermolar width increased from baseline to follow-up in all groups (5.04, p = 0.000; 3.15, p = 0.001; 5.41, p = 0.00, respectively) with no between-group difference (p = 0.560). Maxillary width increased from baseline to follow-up in all groups (4.25, p = 0.001; 4.74, p = 0.00; 4.49, p = 0.001, respectively) with no inter-group difference (p = 0.963). CONCLUSIONS: The amount of skeletal and dental expansion obtained in the maxilla was similar in all groups. Rapid maxillary expansion was not found to be effective in OSA treatment. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT04604392.

Sella turcica variations in patients with transverse skeletal discrepancies versus patients with normal transverse relationships. a cross- sectional study.

BACKGROUND: The sella turcica (ST) is a crucial landmark in orthodontics. It is utilized as a reliable predictor of future growth of the skeletal pattern, assisting in early diagnosis and promoting better treatment planning options. The goal of this research was to compare the morphology and bridging of the sella turcica in transverse maxillary deficient malocclusions and malocclusions with normal transverse relationships. METHODS: A total of 52 cone beam computed tomographic (CBCT) images were selected with an age range of 18-30 years. Group I comprised 26 patients previously diagnosed with transverse maxillary deficiency, while group II comprised 26 patients with normal transverse skeletal relationships. The length, depth and diameter of the ST were measured by two observers, the shape was evaluated as round, oval or flat and sellar bridging was calculated in each case. An Independent t-test was used to compare between the sellar dimensions in both groups. For assessment of bridging percentage Chi square test was used. RESULTS: The mean values of the length, depth and diameter of the sella in group I was 11.09 mm, 8.56 and 12.81 mm respectively and 10.34 mm, 8.24 and 12.38 mm in group II respectively (P ≤ 0.05). No significant differences were found between both groups in any of the sellar dimensions. The rounded ST shape was the most prevalent among both groups (59.6%). Partial ST bridging was found in only 7.7% of group I (p < 0.0001*). Complete ST bridging wasn't detected in either of the groups. CONCLUSIONS: There was no correlation found between transverse maxillary deficiency and the morphology and bridging of the sella turcica.

The short- and long-term changes of upper airway and alar in nongrowing patients treated with Mini-Implant Assisted Rapid Palatal Expansion (MARPE): a systematic review and meta-analysis.

OBJECTIVE: This study aims to assess the short- and long-term changes in the upper airway and alar width after mini-implant -assisted rapid palatal expansion (MARPE) in nongrowing patients. METHODS: Five electronic databases (PubMed, Scopus, Embase, Web of Science, and Cochrane Library) were searched up to 2 August, 2023 based on the PICOS principles. The main outcomes were classified into three groups: 1) nasal cavity changes, 2) upper airway changes and 3) alar changes. The mean difference (MD) and 95% confidence intervals (CI) were used to assess these changes. Heterogeneity tests, subgroup analyses, sensitivity analyses, and publication bias were also analyzed. RESULT: Overall, 22 articles were included for data analysis. Nasal cavity width (WMD: 2.05 mm; 95% CI: 1.10, 3.00) and nasal floor width (WMD: 2.13 mm; 95% CI: 1.16, 3.11) increased significantly. While palatopharyngeal volume (WMD: 0.29 cm3, 95% CI: -0.44, 1.01), glossopharyngeal volume (WMD: 0.30 cm3, 95% CI: -0.29, 0.89) and hypopharyngeal volume (WMD: -0.90 cm3; 95% CI: -1.86, 0.06) remained unchanged, nasal cavity volume (WMD: 1.24 cm3, 95% CI: 0.68, 1.81), nasopharyngeal volume (MD: 0.75 cm3, 95% CI: 0.44, 1.06), oropharyngeal volume (WMD: 0.61 cm3, 95% CI: 0.35, 0.87), and total volume of the upper airway (WMD: 1.67 cm3, 95% CI: 0.68, 2.66) increased significantly. Alar width (WMD: 1.47 mm; 95% CI: 0.40, 2.55) and alar base width (WMD: 1.54 mm; 95% CI: 1.21, 1.87) also increased. CONCLUSION: MARPE can increase nasal cavity width, nasal cavity volume, nasopharyngeal volume and oropharyngeal volume for nongrowing patients, but has no significant effect on hypopharyngeal volume. In addition, the alar width also increased. However, the studies included in this meta-analysis were mainly retrospective, nonrandomized and small in number, so the findings should be interpreted with caution and high-quality RCTs need to be studied.

Efficacy of Miniscrew-Assisted Rapid Palatal Expansion (MARPE) in late adolescents and adults with the Dutch Maxillary Expansion Device: a prospective clinical cohort study.

OBJECTIVES: To provide a higher degree of evidence on the efficacy of Miniscrew-Assisted Rapid Palatal Expansion (MARPE) in late adolescents and adults, thereby applying the Dutch Maxillary Expansion Device (D-MED). MATERIALS AND METHODS: D-MED was developed as an individualized, 3D-designed, and fabricated MARPE appliance supported by 4 palatal miniscrews. Patients from the age of 16 onwards with transverse maxillary deficiency were enrolled consecutively. Pre-expansion and immediate post-expansion CBCTs and intra-oral scans were acquired and measurements of skeletal, alveolar, and dental expansion as well as dental and periodontal side-effects were performed. RESULTS: Thirty-four patients were enrolled (8 men, 26 women) with mean age 27.0 ± 9.4 years. A success rate of 94.1% was achieved (32/34 patients). The mean expansion duration, or mean observation time, was 31.7 ± 8.0 days. The mean expansion at the maxillary first molars (M1) and first premolars (P1) was 6.56 ± 1.70 mm and 4.19 ± 1.29 mm, respectively. The expansion was 60.4 ± 20.1% skeletal, 8.1 ± 27.6% alveolar, and 31.6 ± 20.1% dental at M1 and 92.2 ± 14.5% skeletal, 0.0 ± 18.6% alveolar, and 7.8 ± 17.7% dental at P1, which was both statistically (p < 0.001) and clinically significant. Buccal dental tipping (3.88 ± 3.92° M1; 2.29 ± 3.89° P1), clinical crown height increase (0.12 ± 0.31 mm M1; 0.04 ± 0.22 mm P1), and buccal bone thinning (- 0.31 ± 0.49 mm M1; - 0.01 ± 0.45 mm P1) were observed, while root resorption could not be evaluated. CONCLUSIONS: MARPE by application of D-MED manifested its efficacy in a prospective clinical setting, delivering a high amount of skeletal expansion with limited side-effects in late adolescents and adults. CLINICAL RELEVANCE: Higher quality evidence is supportive of MARPE as a safe and successful non-surgical treatment option for transverse maxillary deficiency.

Clinical applications of miniscrews that broaden the scope of non-surgical orthodontic treatment.

Previously, in the case of malocclusion owing to skeletal discrepancy in adults, the amount of tooth movement was limited since there was no reliable skeletal anchorage device. The only way to treat this case was by repositioning the maxilla and mandible via orthognathic surgery, but most patients are reluctant to undergo surgery owing to the risk and expenses incurred. However, with the current introduction and use of miniscrews as temporary anchorage devices, the entire dental arch can be relocated to a target position without surgery, thus broadening the scope of non-surgical orthodontic treatment compared to the past. For a non-surgical approach to improve skeletal discrepancy, anteroposterior, vertical and transverse displacements of the dental arch are necessary. In this case, the localization of the centre of resistance of the whole arch must precede the appliance design with an appropriate biomechanical design. Especially, in the transverse dimension, the envelope of discrepancy is reportedly narrow, and the tooth movement must accompany the orthopaedic correction involving the midpalatal suture expansion. Recently, in adults with transverse maxillomandibular discrepancy, miniscrew-assisted rapid palatal expansion (MARPE) can be performed. Moreover, compared to surgically assisted rapid palatal expansion, MARPE reduces the cost to the patient and achieves clinically acceptable stable maxillary expansion. In this article, we will discuss the role of total arch movement and MARPE in widening the scope of non-surgical orthodontic treatment, despite the inherent limitations of miniscrews' mechanical aspects.

Variability of the maxillary suture maturation and density in the subjects with different sex and growth status.

INTRODUCTION: The objective of this study was to classify median palatine suture (MPS) maturation type in young and adult patients. Additionally, we compared MPS maturity type and density based on sex and growth status. MATERIALS AND METHODS: In this retrospective cone beam computed tomography study, we included a total of 221 subjects, grouped based on sex and growth status. Once scans were aligned and oriented in the sagittal view, we conducted our evaluations on the axial sections. Based on interdigitation and shape, the MPS were categorized into Maturation Types A through E. Additionally, MPS density was measured as Hounsfield unit equivalent pixel intensity value scale for anterior and posterior sutural regions. RESULTS: The majority of male (39%) and female (42%) subjects had MPS Maturation Type C. A maximum number of growing (42%) patients had Type C and nongrowing subjects (39%) had Type E sutures. The sex comparison showed significantly lower (p < .001) MPS density for both anterior and posterior regions in males when compared to females. Additionally, for the posterior region, nongrowing males had significantly lower (p < .001) MPS density when compared to nongrowing females. Subgroup comparisons of the MPS densities between growing and nongrowing males and growing and nongrowing females showed a significant difference (p < .001). CONCLUSION: Classification of the MPS based on the maturation types provides a reliable predictor for orthodontic treatment planning. MPS density is significantly higher in females as compared to males. Similarly, nongrowing individuals have significantly higher MPS density compared to growing individuals for both anterior and posterior locations.

Methodological quality and outcome of systematic reviews reporting on orthopaedic treatment for class III malocclusion: Overview of systematic reviews.

OBJECTIVES: The aim of this overview of systematic reviews was to investigate methodological quality and outcome of current systematic reviews (SRs) reporting on orthopaedic treatment for class III malocclusion. MATERIALS AND METHODS: Computerized and manual searches were performed in Medline, Google Scholar, Cochrane Library, Embase, LILACS, SciELO, American Journal of Orthodontics and Dentofacial Orthopaedics, Angle Orthodontist, European Journal of Orthodontics, Journal of Orthodontics, Conference abstracts and Grey literature. No restrictions were set on language or date of publication. The search covered the starting date of the relevant databases until 30 April 2015. MeSH terms and free-text terms included 'malocclusion', 'Angle class III', 'orthodontic appliances', 'functional', facemask, review and meta-analysis. Screening of eligible studies, assessment of the methodological quality of the SRs and data extraction were conducted in duplicate and independently by two reviewers. Methodological quality was assessed using AMSTAR (assessment of multiple systematic reviews). RESULTS: A total of 222 studies were retrieved and after removal of duplicates, irrelevant studies, literature reviews and surgical approach treatments, 14 SRs and/or meta-analyses were included for qualitative synthesis. Mean AMSTAR score was 7.7/11 with a range of 3-10. There was evidence to demonstrate that face mask therapy can move the maxilla forward whilst causing a backward rotation of the mandible and increased facial height. There was also some evidence of mandibular growth retardation with chin cup therapy. CONCLUSIONS: Orthopaedic appliances can improve a class III malocclusion in growing patients over the short-term; however, each appliance has a characteristic effect on the underlying skeletal pattern.

The effect of rapid palatal expansion on sleep bruxism in children.

BACKGROUND: Sleep bruxism (SB) is a movement described as an involuntary mastication movement during sleep, also defined as rhythmic masticatory muscle activity (RMMA). It is observed in 2-40 % of the pediatric population. A link was suggested between respiratory events and RMMA. Rapid palatal expansion (RPE) is an effective orthopedic treatment for correcting maxillary transverse deficiency and sleep-disordered breathing (SDB) in children. The aim was to evaluate the possible reduction of SB after rapid palatal expansion (RPE) therapy. METHODS: A total of 32 patients (8-14 years old; 22 girls and 10 boys) received an orthodontic treatment for transverse maxillary deficiency (5 mm or more) at the orthodontics department of the Université de Montréal. They underwent an ambulatory polysomnography (PSG) before, after expansion with the expander, and at the end of the study without the expander. They were classified into three subgroups based on sleep electromyography (EMG) data. RESULTS: Total sleep time and stage NREM 3 presented significant differences between the types of appliances. Moreover, there was a time effect observed for total sleep time, sleep cycles, stage NREM 2, and stage REM, while only a trend suggested for stage NREM 3. Significant differences were observed between subgroups for both RMMA episodes and burst indexes, similarly, for the oxygen desaturation index (ODI). A total of 50 % of the patients were classified as responders when RMMA episodes index decreased by more than 25 % when comparing treatment efficacy at baseline night. CONCLUSION: Most bruxers (65 %) reduced their RMMA episode index after expansion, but sleep and respiratory variables remained unchanged.

Comparison of the soft and hard tissue effects of two different protraction mechanisms in class III patients: a randomized clinical trial.

OBJECTIVE: The objective of the present study is to test the null hypotheses that there were no significant differences for hard and soft tissue changes induced by mini maxillary protractor (MMP) and face mask and rapid maxillary expansion (FM/RME). MATERIALS AND METHODS: Thirty-two patients who met the criteria were randomly divided into two groups: 16 patients (males/females 7/9) in the MMP group and 16 patients (males/females 6/10) in the FM/RME group. The patients in both groups were instructed to wear the appliances for at least 20 h per day until a 2-mm positive overjet was achieved. Hard and soft tissue profile changes observed by MMP and FM/RME were compared using paired and Student's t tests. RESULTS: Class III malocclusion and negative overjet were improved by means of skeletal changes in conjunction with upper incisor proclination and lower incisor retroclination in both groups. Maxilla and surrounding soft tissues (SNA, Ls-E, and Ls-PMV) were significantly moved anteriorly with less rotation of the palatal plane in the MMP group. Mandibular incisors were found to be more retrusive in the FM/RME group (p = 0.024). CONCLUSION: Both groups showed similar effects except more anterior movement of the maxilla and surrounding soft tissues with less rotation of the palatal plane and retrusion of lower incisors in the MMP group. CLINICAL RELEVANCE: This is the first study to compare the soft and hard tissue changes induced by MMP appliance with a conventional FM /RME.

The Association Between Transverse Maxillary Deficiency and Septal Deviation in Adults with Obstructive Sleep Apnea.

OBJECTIVES: Recent evidence suggests that environmental factors impact craniofacial development. Specifically, the height and width of the maxilla may impact the degree of septal deviation. We sought to determine the relationship between transverse maxillary deficiency and severity of septal deviation. METHODS: A prospective cohort of adult sleep surgery patients were evaluated by standardized CT imaging. Primary outcomes evaluated the relationship of a narrow, high-arched palate (the palatal height to width ratio) with the degree of septal deviation at the level of the 1st premolar and 1st molar. Secondary outcome evaluated the relationship of the palatal height-to-width ratio and nasal obstruction. Both adjusted and unadjusted linear regression were performed, including correction for multiple hypothesis testing. RESULTS: Ninety-three patients were included. On average, the cohort was middle aged (54.7 ± 12.7 years), obese (BMI 30.1 ± 4.5 kg/m2), predominantly male (74.2%), White (73.1%), and with severe obstructive sleep apnea (OSA) (AHI 30.0 ± 18.7 events/h). A moderate correlation was observed between both the relative and absolute inter-premolar palatal height and the degree of septal deviation at the inter-molar region. No significant correlation was observed between palatal dimensions and NOSE score. CONCLUSION: This study found that transverse maxillary deficiency is moderately associated with greater degree of septal deviation among a sample of OSA patients. This contributes to the concept that craniofacial development impacts the nasal airway, promoting a comprehensive evaluation of both endonasal and extranasal structures. LEVEL OF EVIDENCE: 4 Laryngoscope, 134:2464-2470, 2024.

Three-dimensional assessment of the maxilla after modified surgically assisted rapid expansion: a retrospective study.

OBJECTIVE: This retrospective study aims to assess the three-dimensional dentoskeletal effects and median palatal suture opening pattern in patients undergoing modified surgically assisted maxillary rapid expansion (SARME) without pterygoid plate detachment. METHODS: Twenty-eight patients submitted to modified SARME between 2009 and 2016 were retrospectively evaluated through cone-beam computed tomography (CBCT). Dental and skeletal measurements were taken at three different operative periods (before the expansion - T0; at the end of the activation of the Hyrax device - T1; and six months after the immobilization of the device - T2). Statistical analyses, including ANOVA and Pearson's correlation coefficient, were performed using SPSS software. RESULTS: SARME demonstrated significant transverse maxillary expansion (with an average of 6.05 mm) with a greater impact in the anterior region. Dental measurements, including canine and molar distances, exhibited significant changes over the operative periods. Bone measurements (ANS and PNS) presented small but significant alterations, including a slight inferior displacement of ANS during device activation. The nasal floor width increased, followed by a width reduction after immobilization. The median palatal suture predominantly exhibited a Type II (V-shaped) opening. CONCLUSION: The modified SARME presented a transversal direction increase and a super-lower skeletal displacement, with the anterior region being more affected than the posterior region. There was no change in the anteroposterior direction of the maxilla. Additionally, there was an increase in the linear dental measurements and a decrease in the angular measurement, with a positive correlation between the amount of posterior bone expansion and molar expansion as a result of the treatment in the analyzed period.

Numerical study of the impact of osteotomies and distractor location in surgically assisted rapid palatal expansion for transverse maxillary deficiency.

INTRODUCTION: This paper employs finite element analysis to assess the biomechanical behavior of surgically assisted rapid palatal expansion (SARPE) with a bone-borne transpalatal distractor (TPD) by varying surgical parameters. MATERIAL AND METHODS: Nine models were constructed to scrutinize the effects of pterygomaxillary disjunction (PMD), lateral osteotomy positioning, and TPD placement on displacement profiles and Von Mises stresses. These models encompassed variations such as no, unilateral or bilateral PMD, asymmetrical lateral osteotomy, and five TPD locations. RESULTS: Performing a PMD reduces posterior resistance to transverse expansion, resulting in 10-20 % stress reduction around the maxillofacial complex. No significant changes in horizontal tipping were observed post-PMD. The asymmetric lateral osteotomy model exhibited larger displacements on the side with a more superiorly positioned osteotomy. Reduced stresses were observed at the maxillary body and medial pterygoid plate (superiorly), while increased stresses were observed at the medial (inferiorly) and lateral pterygoid plates. More posterior TPD placement facilitated more parallel expansion thus less horizontal tipping, albeit with increased vertical tipping. DISCUSSION: SARPE procedures (distractor and osteotomy positions) can be tailored based on desired outcomes. PMD reduces stress within the maxillofacial complex but doesn't significantly affect tipping. Higher lateral osteotomies lead to increased displacements, more posterior distractors to more parallel expansion.

Evaluation of transpalatal distraction in cleft palate patients.

PURPOSE: The aim of this study was to evaluate the effect of combining a bone-borne palatal expander (distractor) with a maxillary osteotomy in the treatment of narrowed maxillae in treated cleft palate patients. Few articles in the literature isolated the effects of transpalatal distraction in cleft patients and most either excluded cleft patients or grouped them with non-cleft patients. The hypothesis is that the use of a bone-borne palatal expander in conjunction with a maxillary osteotomy would improve the amount of maxillary expansion at the anterior segment with less tipping of the segments and provide a harmonious arch form. METHODS: We studied four patients above 14 years of age with repaired cleft palate and progressive anterior constriction of the arch. All patients received a bone-borne distractor (UNI-Smile Distractor, Titamed, Belgium) combined with a LeFort I level osteotomy without pterygomaxillary disjunction. Dental models and CBCT measurements were used to analyze the skeletal and dental effects of the intervention. RESULT: All the patients who completed the trial had satisfactory expansion and normalization of the maxillary arch form. The average increase in the intercanine distance was 12.9 mm while the average increase in the intermolar distance was 7.2 mm. No significant change in molar inclination or buccal bone thickness was observed. CONCLUSION: The use of bone-borne palatal expanders aided by a maxillary osteotomy (transpalatal distraction) in treated cleft palate patients can provide a harmonious arch form in adolescent and adult patients. This trial was registered in the clinical trials registry with the ID NCT03837652 on February 12, 2019.

Face Mask Therapy and Comprehensive Orthodontic Treatment for Skeletal Class III Malocclusion: A Case Report.

Aim: This article aims to report a case of face mask therapy and comprehensive orthodontic treatment for skeletal class III malocclusion in a 16-year-old girl. Background: Treating skeletal class III malocclusion in a growing patient is crucial, as it can help avoid the need for additional surgery. Early treatment also lessens the negative impacts of the patient's facial abnormality on their social life because surgery is only done later. Case description: In this case report, a 14-year-old female patient presented with skeletal class III malocclusion with primary complaints of anterior crossbite. There was no relevant medical history. Face mask therapy and fixed appliance therapy were components of the treatment approach that successfully corrected the malocclusion. The total period of treatment was 20 months. Conclusion: The treatment resulted in a harmonious face, a well-aligned smile arch, stable dental and skeletal relationships, and significant esthetic improvements, including improved facial symmetry and profile. Significance: A growing teen who has a skeletal class III malocclusion and a maxillary deficit may be helped by a combination of face mask therapy and thorough orthodontic treatment. This case report outlines the use of the aforementioned technique to successfully treat a 14-year-old child with class III malocclusion and maxillary deficiencies.Early management of skeletal class III malocclusion in developing adolescents is vital as it can potentially eliminate the necessity for future surgical intervention, leading to improved treatment outcomes.Careful case selection, patient cooperation, and long-term stability enable a successful, stable, and esthetically pleasing treatment outcome. How to cite this article: Le LN, Do TT, P Le KV. Face Mask Therapy and Comprehensive Orthodontic Treatment for Skeletal Class III Malocclusion: A Case Report. Int J Clin Pediatr Dent 2024;17(3):368-376.

Orthodontic treatment for a mandibular prognathic girl of short stature under growth hormone therapy.

This report presents a case of a 12-year-old girl with maxillary deficiency, mandibular prognathism, and facial asymmetry, undergoing growth hormone (GH) therapy due to idiopathic short stature. Children of short stature with or without GH deficiency have a deviating craniofacial morphology with overall smaller dimensions; facial retrognathism, especially mandibular retrognathism; and increased facial convexity. However, a complete opposite craniofacial pattern was presented in our case of a skeletal Class III girl with idiopathic short stature. The orthodontic treatment goal was to inhibit or change the direction of mandibular growth and stimulate the maxillary growth of the girl during a course of GH therapy. Maxillary protraction and mandibular retraction were achieved using occipitomental anchorage (OMA) orthopedic appliance in the first stage of treatment. In the second stage, the patient was treated with a fixed orthodontic appliance using a modified multiple-loop edgewise archwire technique of asymmetric mechanics and an active retainer of vertical chin-cup. The treatment led to an acceptable facial profile and obvious facial asymmetry improvement. Class I dental occlusion and coincident dental midline were also achieved. A 3½-year follow-up of the girl at age 18 showed a stable result of the orthodontic and dentofacial orthopedic treatment. Our case shows that the OMA orthopedic appliance of maxillary protraction combined with mandibular retraction is effective for correcting skeletal Class III malocclusion with midface deficiency and mandibular prognathism in growing children with idiopathic short stature undergoing GH therapy.

The effects of face mask and tongue plate on maxillary deficiency in growing patients: a randomized clinical trial.

OBJECTIVE: The purpose of this randomized clinical trial was to compare the effects of facemask and tongue plate therapy in the treatment of class III malocclusion associated with maxillary deficiency in growing patients. DESIGN: Prospective, randomized clinical trial. SETTING: Department of Orthodontics, SB University of Medical Sciences Dental School, Tehran, Iran. METHODS: Fifty patients with maxillary deficiency were randomly allocated to two groups. One group was treated with a removable facemask and the other with a tongue plate. Three patients dropped out of the study leaving a final number of 47 that were analysed. The face mask group included 24 patients (12 males, 12 females) with a mean age of 9 (SD 1·2) years; while the tongue plate group included 23 patients (10 males, 13 females) with a mean age of 9·1 (SD 0·9) years. The patients lateral cephalograms obtained at the beginning and end of the study were analysed. RESULTS: Paired t-tests showed that SNA increased by 1° (SD 1·5°) in the facemask group (P<0·001) and by 2·2° (SD 1·5°) in the tongue plate group (P<0·001). With the exception of SNA and GoGn, Mann-Whitney testing showed that there were no statistically significant differences between the two groups. IMPA was found to decrease significantly in both groups. CONCLUSION: Both treatment modalities were successful in moving the maxilla forward, proclining the maxillary incisors and retroclining the mandibular incisors. The more simple design of the tongue plate might therefore confer some advantages to this system in comparison with a facemask.

Evaluation of swallowing in transverse maxillary deficiency patients before and after rapid maxillary expansion.

OBJECTIVES: To evaluate swallowing function in relation to oropharyngeal dysphagia (OD) in adolescents who had transverse maxillary deficiency with posterior crossbite and high-arched palate, before, and after rapid maxillary expansion (RME). MATERIALS AND METHODS: Twenty patients (mean age: 13.0 ± 3.1) with bilateral posterior crossbite and high-arched palate (RME group: RMEG) and 20 volunteers (mean age: 13.4 ± 2.6) with Class I crowding without posterior crossbite or high-arched palate (control group: CG) were recruited. OD signs and symptoms were evaluated using the Eating Assessment Tool-10 (EAT-10) questionnaire, patient complaints, and physical examination of swallowing function before (T1) and 7 months after (T2) RME. Additionally, fiberoptic endoscopic evaluation of swallowing (FEES) with water, yogurt, and cracker was performed. In CG, evaluation of swallowing was performed only once, corresponding to T1 of RMEG. RESULTS: Prevalence of OD signs and symptoms based on patient complaints and physical examination of swallowing was low (5%-15%), and nonsignificant differences were observed between CG and RMEG at T1 for these parameters as well as for EAT-10 scores. Total post-swallow pharyngeal residue with yogurt was significantly different between CG and RMEG at T1, with a prevalence of 60% in RMEG (P < .05). There was no significant difference regarding residue with yogurt between T1 and T2 in RMEG (P > .05). CONCLUSION: Patients with a maxillary transverse deficiency were affected by pharyngeal residue as indicated by FEES, but it did not appear to improve in short-term follow-up in patients treated with RME.