Light-induced H2 generation in a photosystem I-O2-tolerant [FeFe] hydrogenase nanoconstruct.

The fusion of hydrogenases and photosynthetic reaction centers (RCs) has proven to be a promising strategy for the production of sustainable biofuels. Type I (iron-sulfur-containing) RCs, acting as photosensitizers, are capable of promoting electrons to a redox state that can be exploited by hydrogenases for the reduction of protons to dihydrogen (H2). While both [FeFe] and [NiFe] hydrogenases have been used successfully, they tend to be limited due to either O2 sensitivity, binding specificity, or H2 production rates. In this study, we fuse a peripheral (stromal) subunit of Photosystem I (PS I), PsaE, to an O2-tolerant [FeFe] hydrogenase from Clostridium beijerinckii using a flexible [GGS]4 linker group (CbHydA1-PsaE). We demonstrate that the CbHydA1 chimera can be synthetically activated in vitro to show bidirectional activity and that it can be quantitatively bound to a PS I variant lacking the PsaE subunit. When illuminated in an anaerobic environment, the nanoconstruct generates H2 at a rate of 84.9 ± 3.1 µmol H2 mgchl-1 h-1. Further, when prepared and illuminated in the presence of O2, the nanoconstruct retains the ability to generate H2, though at a diminished rate of 2.2 ± 0.5 µmol H2 mgchl-1 h-1. This demonstrates not only that PsaE is a promising scaffold for PS I-based nanoconstructs, but the use of an O2-tolerant [FeFe] hydrogenase opens the possibility for an in vivo H2 generating system that can function in the presence of O2.

Identification of serine/threonine kinases that regulate metabolism and sporulation in Clostridium beijerinckii.

Serine/threonine protein kinases (STKs) are important for signal transduction and involved in multiple physiological processes, including cell growth, central metabolism, and sporulation in bacteria. However, the role of STKs in solventogenic clostridia remains unclear. Here, we identified and comprehensively investigated six STK candidates in Clostridium beijerinckii. These STKs were classified into four groups with distinct characteristics via analysis of genetic organizations, prediction of protein domains, and multiple sequence alignment. Cbei0566 is a member of the PrkA family with 41% identity to PrkA from Bacillus subtilis, and both Cbei0666 and Cbei0813 are two-component-like STKs. Cbei1151 and Cbei1929 belong to the Hanks family STKs and consist of a cytoplasmic catalytic domain, a transmembrane region, and extracellular sensor domains. In-frame deletion mutants of cbei0566, cbei0666, cbei1929, and cbei2661 displayed similar cell growth with wild type. Both Δcbei0666 and Δcbei2661 improved acetone-butanol-ethanol (ABE) production by 14.3% (19.2 g/L vs. 16.8 g/L), and the sporulation frequencies of Δcbei0566, Δcbei1929, and Δcbei2661 significantly decreased to 35.5%, 55.1% and 44.8%, respectively. The restored phenotypes after genetic complementation demonstrated their direct link to STKs deletion. Remarkably, overexpressing cbei0566 contributed to 41.5% more spore formation and cbei1929 overexpression enhanced ABE production from 19.3 to 24.2 g/L, along with 25% less acids. These results revealed that Cbei0566 and Cbei1929 had prominent regulatory functions. This study expands the current knowledge of the existence and functions of STKs in prokaryotes and highlights the importance of STK-mediated signaling networks in developing superior strains. KEY POINTS: • First reported serine/threonine protein kinases in solventogenic clostridia • Six STKs with distinct properties possessed diverse functions in C. beijerinckii • Cbei1929 and Cbei0566 remarkably regulated solventogenesis and sporulation.

Adaptation and application of a two-plasmid inducible CRISPR-Cas9 system in Clostridium beijerinckii.

Recent developments in CRISPR technologies have opened new possibilities for improving genome editing tools dedicated to the Clostridium genus. In this study we adapted a two-plasmid tool based on this technology to enable scarless modification of the genome of two reference strains of Clostridium beijerinckii producing an Acetone/Butanol/Ethanol (ABE) or an Isopropanol/Butanol/Ethanol (IBE) mix of solvents. In the NCIMB 8052 ABE-producing strain, inactivation of the SpoIIE sporulation factor encoding gene resulted in sporulation-deficient mutants, and this phenotype was reverted by complementing the mutant strain with a functional spoIIE gene. Furthermore, the fungal cellulase-encoding celA gene was inserted into the C. beijerinckii NCIMB 8052 chromosome, resulting in mutants with endoglucanase activity. A similar two-plasmid approach was next used to edit the genome of the natural IBE-producing strain C. beijerinckii DSM 6423, which has never been genetically engineered before. Firstly, the catB gene conferring thiamphenicol resistance was deleted to make this strain compatible with our dual-plasmid editing system. As a proof of concept, our dual-plasmid system was then used in C. beijerinckii DSM 6423 ΔcatB to remove the endogenous pNF2 plasmid, which led to a sharp increase of transformation efficiencies.

Production of butanol from distillers' grain waste by a new aerotolerant strain of Clostridium beijerinckii LY-5.

A new aerotolerant strain of Clostridium beijerinckii LY-5 was isolated from the pit mud of the Chinese Baijiu-making process for butanol production. Plackett-Burman design and artificial neural network were used to optimize the fermentation medium and a total of 13.54 ± 0.22 g/L butanol and 19.91 ± 0.52 g/L ABE were attained under aerotolerant condition. Moreover, distillers' grain waste (DGW), the main by-product in the Baijiu production process, was utilized as potential substrate for butanol production. DGW was hydrolyzed by α-amylase and glucoamylase and then fermented after a detoxifying process of overliming. Butanol and ABE concentrations were 9.02 ± 0.18 and 9.57 ± 0.19 g/L with the yield of 0.21 and 0.23 g/g sugar, respectively. The higher ratio of butanol to ABE might be caused by the inhibitors in DGW medium affecting the metabolic pathways of C. beijerinckii LY-5 and approximately 1.48 ± 0.04 g/L isopropanol was found at the end of fermentation. This work highlights the feasibility of using DGW as a promising feedstock for butanol production by a new aerotolerant strain of C. beijerinckii LY-5, with benefit to the environment.

Ferrous-Iron-Activated Transcriptional Factor AdhR Regulates Redox Homeostasis in Clostridium beijerinckii.

The AdhR regulatory protein is an activator of σ54-dependent transcription of adhA1 and adhA2 genes, which are required for alcohol synthesis in Clostridium beijerinckii Here, we identified the signal perceived by AdhR and determined the regulatory mechanism of AdhR activity. By assaying the activity of AdhR in N-terminally truncated forms, a negative control mechanism of AdhR activity was identified in which the central AAA+ domain is subject to repression by the N-terminal GAF and PAS domains. Binding of Fe2+ to the GAF domain was found to relieve intramolecular repression and stimulate the ATPase activity of AdhR, allowing the AdhR to activate transcription. This control mechanism enables AdhR to regulate transcription of adhA1 and adhA2 in response to cellular redox status. The mutants deficient in AdhR or σ54 showed large shifts in intracellular redox state indicated by the NADH/NAD+ ratio under conditions of increased electron availability or oxidative stress. We demonstrated that the Fe2+-activated transcriptional regulator AdhR and σ54 control alcohol synthesis to maintain redox homeostasis in clostridial cells. Expression of N-terminally truncated forms of AdhR resulted in improved solvent production by C. beijerinckiiIMPORTANCE Solventogenic clostridia are anaerobic bacteria that can produce butanol, ethanol, and acetone, which can be used as biofuels or building block chemicals. Here, we show that AdhR, a σ54-dependent transcriptional activator, senses the intracellular redox status and controls alcohol synthesis in Clostridium beijerinckii AdhR provides a new example of a GAF domain coordinating a mononuclear non-heme iron to sense and transduce the redox signal. Our study reveals a previously unrecognized functional role of σ54 in control of cellular redox balance and provides new insights into redox signaling and regulation in clostridia. Our results reveal AdhR as a novel engineering target for improving solvent production by C. beijerinckii and other solventogenic clostridia.

Combined evolutionary engineering and genetic manipulation improve low pH tolerance and butanol production in a synthetic microbial Clostridium community.

Synthetic microbial communities have become a focus of biotechnological research since they can overcome several of the limitations of single-specie cultures. A paradigmatic example is Clostridium cellulovorans DSM 743B, which can decompose lignocellulose but cannot produce butanol. Clostridium beijerinckii NCIMB 8052 however, is unable to use lignocellulose but can produce high amounts of butanol from simple sugars. In our previous studies, both organisms were cocultured to produce butanol by consolidated bioprocessing. However, such consolidated bioprocessing implementation strongly depends on pH regulation. Since low pH (pH 4.5-5.5) is required for butanol fermentation, C. cellulovorans cannot grow well and saccharify sufficient lignocellulose to feed both strains at a pH below 6.4. To overcome this bottleneck, this study engineered C. cellulovorans by adaptive laboratory evolution, inactivating cell wall lyases genes (Clocel_0798 and Clocel_2169), and overexpressing agmatine deiminase genes (augA, encoded by Cbei_1922) from C. beijerinckii NCIMB 8052. The generated strain WZQ36: 743B*6.0*3△lyt0798△lyt2169-(pXY1-Pthl -augA) can tolerate a pH of 5.5. Finally, the alcohol aldehyde dehydrogenase gene adhE1 from Clostridium acetobutylicum ATCC 824 was introduced into the strain to enable butanol production at low pH, in coordination with solvent fermentation of C. beijerinckii in consortium. The engineered consortium produced 3.94 g/L butanol without pH control within 83 hr, which is more than 5-fold of the level achieved by wild consortia under the same conditions. This exploration represents a proof of concept on how to combine metabolic and evolutionary engineering to coordinate coculture of a synthetic microbial community.

Biobutanol production from sugarcane bagasse by Clostridium beijerinckii strains.

Acetone-butanol-ethanol (ABE) fermentation was performed with sugarcane bagasse (SCB) hydrolysate using Clostridium beijerinckii strains. A cost-effective SCB medium was developed with no enzymatic hydrolysis and no supplementation of extra carbon source or expensive nitrogen source. One of the C. beijerinckii strains studied was able to produce butanol with butanol productivity of 1.23 g/L/day with butanol yield of 0.18 g/g of sugars from the developed medium. High utilization rate of both glucose and xylose was observed in SCB medium during ABE fermentation. This study shows that SCB is a promising substrate for cellulosic biobutanol production.

Utilization of banana crop residue as an agricultural bioresource for the production of acetone-butanol-ethanol by Clostridium beijerinckii YVU1.

This study aimed to produce acetone-butanol-ethanol (ABE) using lignocellulosic crop residues as renewable bioresources. Butanol production from banana crop residue (BCR) was studied using a newly isolated solventogenic Clostridium beijerinckii YVU1. BCR is one of the abundant lignocellulosic substrates available in tropical countries containing 4·3 ± 3·5% cellulose, 28·5 ± 3·0% hemicellulose and 20·3 ± 2·6% lignin. The sequential dilute alkali and acid pretreatments solubilized 69% of lignin and 73% of hemicellulose. Ten percent (w/v) of pretreated substrate was subjected to enzymatic saccharification with cellulase, and it was found to release 0·481 ± 0·035 g glucose per g pretreated biomass. In the batch fermentation process, 20·5 g l-1 ABE (14·0 g l-1 of butanol, 5·4 g l-1 of acetone and 1·1 g l-1 of ethanol) was obtained. The executed fermentation process yielded 0·39 g ABE per g hydrolysate with 0·14 g l-1  h-1 of volumetric productivity. On the basis of the results, we believe that sequential alkali and acid pretreatment on the enzymatic hydrolysis for butanol production is indeed a technology with the potential to be applied and newly isolated. C. beijerinckii YVU1 is also a potential candidate organism for butanol production agricultural residues. SIGNIFICANCE AND IMPACT OF THE STUDY: This study demonstrates that a banana crop residue (BCR) can be successfully utilized as an inexpensive and alternative bioresource for the production of acetone-butanol-ethanol (ABE). The sequential pretreatment of BCR with alkali and acid solubilized lignin and hemicellulose leading to high glucose release during enzymatic hydrolysis. A newly isolated Clostridium beijerinckii YVU1 was able to produce comparable amount of ABE with previous reports. Therefore, we can state that the utilization of BCR as substrate for C. beijerinckii YVU1 leads to an economical bioprocess for the microbial production of ABE.

Production of isopropyl and butyl esters by Clostridium mono-culture and co-culture.

Production of esters from the acetone-butanol-ethanol (ABE) fermentation by Clostridium often focuses on butyl butyrate, leaving acetone as an undesired product. Addition of butyrate is also often needed because ABE fermentation does not produce enough butyrate. Here we addressed the problems using Clostridium beijerinckii BGS1 that preferred to produce isopropanol instead of acetone, and co-culturing it with Clostridium tyrobutyricum ATCC 25,755 that produced butyrate. Unlike acetone, isopropanol could be converted into ester using lipase and acids. C. tyrobutyricum ATCC 25,755 produced acids at pH 6, while C. beijerinckii BGS1 produced mainly solvents at the same pH. When the two strains were co-cultured, more butyrate was produced, leading to a higher titer of esters than the mono-culture of C. beijerinckii BGS1. As the first study reporting the production of isopropyl butyrate from the Clostridium fermentation, this study highlighted the potential use of lipase and co-culture strategy in ester production.

Genetic sensor-regulators functional in Clostridia.

This study addressed the functionality of genetic circuits carrying natural regulatory elements of Clostridium acetobutylicum ATCC 824 in the presence of the respective inducer molecules. Specifically, promoters and their regulators involved in diverse carbon source utilization were characterized using mCherryOpt or beta-galactosidase as a reporter. Consequently, most of the genetic circuits tested in this study were functional in Clostridium acetobutylicum ATCC 824 in the presence of an inducer, leading to the expression of reporter proteins. These genetic sensor-regulators were found to be transferable to another Clostridium species, such as Clostridium beijerinckii NCIMB 8052. The gradual expression of reporter protein was observed as a function of the carbohydrates of interest. A xylose-inducible promoter allows a titratable and robust expression of a reporter protein with stringency and efficacy. This xylose-inducible circuit was seen to enable induction of the expression of reporter proteins in the presence of actual sugar mixtures incorporated in woody hydrolysate wherein glucose and xylose are present as predominant carbon sources.

Molecular mechanism of environmental d-xylose perception by a XylFII-LytS complex in bacteria.

d-xylose, the main building block of plant biomass, is a pentose sugar that can be used by bacteria as a carbon source for bio-based fuel and chemical production through fermentation. In bacteria, the first step for d-xylose metabolism is signal perception at the membrane. We previously identified a three-component system in Firmicutes bacteria comprising a membrane-associated sensor protein (XylFII), a transmembrane histidine kinase (LytS) for periplasmic d-xylose sensing, and a cytoplasmic response regulator (YesN) that activates the transcription of the target ABC transporter xylFGH genes to promote the uptake of d-xylose. The molecular mechanism underlying signal perception and integration of these processes remains elusive, however. Here we purified the N-terminal periplasmic domain of LytS (LytSN) in a complex with XylFII and determined the conformational structures of the complex in its d-xylose-free and d-xylose-bound forms. LytSN contains a four-helix bundle, and XylFII contains two Rossmann fold-like globular domains with a xylose-binding cleft between them. In the absence of d-xylose, LytSN and XylFII formed a heterodimer. Specific binding of d-xylose to the cleft of XylFII induced a large conformational change that closed the cleft and brought the globular domains closer together. This conformational change led to the formation of an active XylFII-LytSN heterotetramer. Mutations at the d-xylose binding site and the heterotetramer interface diminished heterotetramer formation and impaired the d-xylose-sensing function of XylFII-LytS. Based on these data, we propose a working model of XylFII-LytS that provides a molecular basis for d-xylose utilization and metabolic modification in bacteria.

Enhanced volatile fatty acid production from sago hampas by Clostridium beijerinckii SR1 for bioelectricity generation using microbial fuel cells.

Sago hampas is a starch-based biomass from sago processing industries consisted of 58% remaining starch. This study has demonstrated the bioconversion of sago hampas to volatile fatty acids (VFAs) by Clostridium beijerinckii SR1 via anaerobic digestion. Higher total VFAs were obtained from sago hampas (5.04 g/L and 0.287 g/g) as compared to commercial starch (5.94 g/L and 0.318 g/g). The physical factors have been investigated for the enhancement of VFAs production using one-factor-at-a-time (OFAT). The optimum condition; 3% substrate concentration, 3 g/L of yeast extract concentration and 2 g/L of ammonium nitrate enhanced the production of VFAs by 52.6%, resulted the total VFAs produced is 7.69 g/L with the VFAs yield of 0.451 g/g. VFAs hydrolysate produced successfully generated 273.4 mV of open voltage circuit and 61.5 mW/m2 of power density in microbial fuel cells. It was suggested that sago hampas provide as an alternative carbon feedstock for bioelectricity generation.

l-Rhamnose Metabolism in Clostridium beijerinckii Strain DSM 6423.

Macroalgae (or seaweeds) are considered potential biomass feedstocks for the production of renewable fuels and chemicals. Their sugar composition is different from that of lignocellulosic biomasses, and in green species, including Ulva lactuca, the major sugars are l-rhamnose and d-glucose. C. beijerinckii DSM 6423 utilized these sugars in a U. lactuca hydrolysate to produce acetic acid, butyric acid, isopropanol, butanol, and ethanol (IBE), and 1,2-propanediol. d-Glucose was almost completely consumed in diluted hydrolysates, while l-rhamnose or d-xylose was only partially utilized. In this study, the metabolism of l-rhamnose by C. beijerinckii DSM 6423 was investigated to improve its utilization from natural resources. Fermentations on d-glucose, l-rhamnose, and a mixture of d-glucose and l-rhamnose were performed. On l-rhamnose, the cultures showed low growth and sugar consumption and produced 1,2-propanediol, propionic acid, and n-propanol in addition to acetic and butyric acids, whereas on d-glucose, IBE was the major product. On a d-glucose-l-rhamnose mixture, both sugars were converted simultaneously and l-rhamnose consumption was higher, leading to high levels of 1,2-propanediol (78.4 mM), in addition to 59.4 mM butanol and 31.9 mM isopropanol. Genome and transcriptomics analysis of d-glucose- and l-rhamnose-grown cells revealed the presence and transcription of genes involved in l-rhamnose utilization and in bacterial microcompartment (BMC) formation. These data provide useful insights into the metabolic pathways involved in l-rhamnose utilization and the effects on the general metabolism (glycolysis, early sporulation, and stress response) induced by growth on l-rhamnose.IMPORTANCE A prerequisite for a successful biobased economy is the efficient conversion of biomass resources into useful products, such as biofuels and bulk and specialty chemicals. In contrast to other industrial microorganisms, natural solvent-producing clostridia utilize a wide range of sugars, including C5, C6, and deoxy-sugars, for production of long-chain alcohols (butanol and 2,3-butanediol), isopropanol, acetone, n-propanol, and organic acids. Butanol production by clostridia from first-generation sugars is already a commercial process, but for the expansion and diversification of the acetone, butanol, and ethanol (ABE)/IBE process to other substrates, more knowledge is needed on the regulation and physiology of fermentation of sugar mixtures. Green macroalgae, produced in aquaculture systems, harvested from the sea or from tides, can be processed into hydrolysates containing mixtures of d-glucose and l-rhamnose, which can be fermented. The knowledge generated in this study will contribute to the development of more efficient processes for macroalga fermentation and of mixed-sugar fermentation in general.

Genome and transcriptome of the natural isopropanol producer Clostridium beijerinckii DSM6423.

BACKGROUND: There is a worldwide interest for sustainable and environmentally-friendly ways to produce fuels and chemicals from renewable resources. Among them, the production of acetone, butanol and ethanol (ABE) or Isopropanol, Butanol and Ethanol (IBE) by anaerobic fermentation has already a long industrial history. Isopropanol has recently received a specific interest and the best studied natural isopropanol producer is C. beijerinckii DSM 6423 (NRRL B-593). This strain metabolizes sugars into a mix of IBE with only low concentrations of ethanol produced (< 1 g/L). However, despite its relative ancient discovery, few genomic details have been described for this strain. Research efforts including omics and genetic engineering approaches are therefore needed to enable the use of C. beijerinckii as a microbial cell factory for production of isopropanol. RESULTS: The complete genome sequence and a first transcriptome analysis of C. beijerinckii DSM 6423 are described in this manuscript. The combination of MiSeq and de novo PacBio sequencing revealed a 6.38 Mbp chromosome containing 6254 genomic objects. Three Mobile Genetic Elements (MGE) were also detected: a linear double stranded DNA bacteriophage (ϕ6423) and two plasmids (pNF1 and pNF2) highlighting the genomic complexity of this strain. A first RNA-seq transcriptomic study was then performed on 3 independent glucose fermentations. Clustering analysis allowed us to detect some key gene clusters involved in the main life cycle steps (acidogenesis, solvantogenesis and sporulation) and differentially regulated among the fermentation. These putative clusters included some putative metabolic operons comparable to those found in other reference strains such as C. beijerinckii NCIMB 8052 or C. acetobutylicum ATCC 824. Interestingly, only one gene was encoding for an alcohol dehydrogenase converting acetone into isopropanol, suggesting a single genomic event occurred on this strain to produce isopropanol. CONCLUSIONS: We present the full genome sequence of Clostridium beijerinckii DSM 6423, providing a complete genetic background of this strain. This offer a great opportunity for the development of dedicated genetic tools currently lacking for this strain. Moreover, a first RNA-seq analysis allow us to better understand the global metabolism of this natural isopropanol producer, opening the door to future targeted engineering approaches.

Transcription profiling of butanol producer Clostridium beijerinckii NRRL B-598 using RNA-Seq.

BACKGROUND: Thinning supplies of natural resources increase attention to sustainable microbial production of bio-based fuels. The strain Clostridium beijerinckii NRRL B-598 is a relatively well-described butanol producer regarding its genotype and phenotype under various conditions. However, a link between these two levels, lying in the description of the gene regulation mechanisms, is missing for this strain, due to the lack of transcriptomic data. RESULTS: In this paper, we present a transcription profile of the strain over the whole fermentation using an RNA-Seq dataset covering six time-points with the current highest dynamic range among solventogenic clostridia. We investigated the accuracy of the genome sequence and particular genome elements, including pseudogenes and prophages. While some pseudogenes were highly expressed, all three identified prophages remained silent. Furthermore, we identified major changes in the transcriptional activity of genes using differential expression analysis between adjacent time-points. We identified functional groups of these significantly regulated genes and together with fermentation and cultivation kinetics captured using liquid chromatography and flow cytometry, we identified basic changes in the metabolism of the strain during fermentation. Interestingly, C. beijerinckii NRRL B-598 demonstrated different behavior in comparison with the closely related strain C. beijerinckii NCIMB 8052 in the latter phases of cultivation. CONCLUSIONS: We provided a complex analysis of the C. beijerinckii NRRL B-598 fermentation profile using several technologies, including RNA-Seq. We described the changes in the global metabolism of the strain and confirmed the uniqueness of its behavior. The whole experiment demonstrated a good reproducibility. Therefore, we will be able to repeat the experiment under selected conditions in order to investigate particular metabolic changes and signaling pathways suitable for following targeted engineering.

Enhanced phenolic compounds tolerance response of Clostridium beijerinckii NCIMB 8052 by inactivation of Cbei_3304.

BACKGROUND: Phenolic compounds generated in hydrolysis of lignocellulosic materials are major limiting factors for biological production of solvents by Clostridia, but it lacks the attention on the study of adaptation or resistance mechanisms in response to phenolic compounds. RESULTS: Gene Cbei_3304, encoding a hypothetical membrane transport protein, was analyzed by bioinformatic method. After insertional inactivation of the functionally uncertain gene Cbei_3304 in Clostridium beijerinckii NCIMB 8052, resulted in enhanced phenolic compounds tolerance. Compared to the parent strain C. beijerinckii NCIMB 8052, evaluation of toxicity showed the recombination stain C. beijerinckii 3304::int had a higher level of tolerance to four model phenolic compounds of lignocellulose-derived microbial inhibitory compounds. A comparative transcriptome analysis showed that the genes were involved in membrane transport proteins (ABC and MFS family) and were up-regulated expression after disrupting gene Cbei_3304. Additionally, the adaptation of C. beijerinckii NCIMB 8052 in response to non-detoxified hemicellulosic hydrolysate was improved by disrupting gene Cbei_3304. CONCLUSION: Toxicity evaluation of lignocellulose-derived phenolic compounds shows that Cbei_3304 plays a significant role in regulating toxicities tolerance for ABE fermentation by C. beijerinckii, and the adaptation of non-detoxified hemicellulosic hydrolysate is significantly improved after inactivation of Cbei_3304 in wild-type strain C. beijerinckii NCIMB 8052. It provided a potential strategy for generating high inhibitor tolerance strains for using lignocellulosic materials to produce solvents by clostridia in this study.

The Draft Genome Sequence of Clostridium beijerinckii NJP7, a Unique Bacterium Capable of Producing Isopropanol-Butanol from Hemicellulose Through Consolidated Bioprocessing.

A wild type solventogenic Clostridium beijerinckii NJP7 capable of converting polysaccharides, such as hemicellulose, into butanol and isopropanol via a unique acetone-isopropanol-butanol (AIB) pathway was isolated and characterized. This represents the first wild type isopropanol-butanol generating bacterium which could achieve butanol production directly from lignocellulose through consolidated bioprocessing (CBP). Strain NJP7 was isolated from decomposite soil from Laoshan Nature Park, China, and its genome shows 98.6% identical to 89.5% of the Clostridium diolis submitted genome sequence. The assembled draft genome contains 5.76 Mb and 5101 predicted encoding proteins with a GC content of 29.73%. Among these annotated proteins, hemicellulase and the secondary alcohol dehydrogenase play key roles in achievement of AIB production from hemicellulose through CBP.

Modulation of the Acetone/Butanol Ratio during Fermentation of Corn Stover-Derived Hydrolysate by Clostridium beijerinckii Strain NCIMB 8052.

Producing biobutanol from lignocellulosic biomass has shown promise to ultimately reduce greenhouse gases and alleviate the global energy crisis. However, because of the recalcitrance of a lignocellulosic biomass, a pretreatment of the substrate is needed which in many cases releases soluble lignin compounds (SLCs), which inhibit growth of butanol-producing clostridia. In this study, we found that SLCs changed the acetone/butanol ratio (A/B ratio) during butanol fermentation. The typical A/B molar ratio during Clostridium beijerinckii NCIMB 8052 batch fermentation with glucose as the carbon source is about 0.5. In the present study, the A/B molar ratio during batch fermentation with a lignocellulosic hydrolysate as the carbon source was 0.95 at the end of fermentation. Structural and redox potential changes of the SLCs were characterized before and after fermentation by using gas chromatography/mass spectrometry and electrochemical analyses, which indicated that some exogenous SLCs were involved in distributing electron flow to C. beijerinckii, leading to modulation of the redox balance. This was further demonstrated by the NADH/NAD+ ratio and trxB gene expression profile assays at the onset of solventogenic growth. As a result, the A/B ratio of end products changed significantly during C. beijerinckii fermentation using corn stover-derived hydrolysate as the carbon source compared to glucose as the carbon source. These results revealed that SLCs not only inhibited cell growth but also modulated the A/B ratio during C. beijerinckii butanol fermentation.IMPORTANCE Bioconversion of lignocellulosic feedstocks to butanol involves pretreatment, during which hundreds of soluble lignin compounds (SLCs) form. Most of these SLCs inhibit growth of solvent-producing clostridia. However, the mechanism by which these compounds modulate electron flow in clostridia remains elusive. In this study, the results revealed that SLCs changed redox balance by producing oxidative stress and modulating electron flow as electron donors. Production of H2 and acetone was stimulated, while butanol production remained unchanged, which led to a high A/B ratio during C. beijerinckii fermentation using corn stover-derived hydrolysate as the carbon source. These observations provide insight into utilizing C. beijerinckii to produce butanol from a lignocellulosic biomass.

Genome Editing in Clostridium saccharoperbutylacetonicum N1-4 with the CRISPR-Cas9 System.

Clostridium saccharoperbutylacetonicum N1-4 is well known as a hyper-butanol-producing strain. However, the lack of genetic engineering tools hinders further elucidation of its solvent production mechanism and development of more robust strains. In this study, we set out to develop an efficient genome engineering system for this microorganism based on the clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated 9 (CRISPR-Cas9) system. First, the functionality of the CRISPR-Cas9 system previously customized for Clostridium beijerinckii was evaluated in C. saccharoperbutylacetonicum by targeting pta and buk, two essential genes for acetate and butyrate production, respectively. pta and buk single and double deletion mutants were successfully obtained based on this system. However, the genome engineering efficiency was rather low (the mutation rate is <20%). Therefore, the efficiency was further optimized by evaluating various promoters for guide RNA (gRNA) expression. With promoter P J23119 , we achieved a mutation rate of 75% for pta deletion without serial subculturing as suggested previously for C. beijerinckii Thus, this developed CRISPR-Cas9 system is highly desirable for efficient genome editing in C. saccharoperbutylacetonicum Batch fermentation results revealed that both the acid and solvent production profiles were altered due to the disruption of acid production pathways; however, neither acetate nor butyrate production was eliminated with the deletion of the corresponding gene. The butanol production, yield, and selectivity were improved in mutants, depending on the fermentation medium. In the pta buk double deletion mutant, the butanol production in P2 medium reached 19.0 g/liter, which is one of the highest levels ever reported from batch fermentations.IMPORTANCE An efficient CRISPR-Cas9 genome engineering system was developed for C. saccharoperbutylacetonicum N1-4. This paves the way for elucidating the solvent production mechanism in this hyper-butanol-producing microorganism and developing strains with desirable butanol-producing features. This tool can be easily adapted for use in closely related microorganisms. As also reported by others, here we demonstrated with solid data that the highly efficient expression of gRNA is the key factor determining the efficiency of CRISPR-Cas9 for genome editing. The protocol developed in this study can provide essential references for other researchers who work in the areas of metabolic engineering and synthetic biology. The developed mutants can be used as excellent starting strains for development of more robust ones for desirable solvent production.

Characterization of a Clostridium beijerinckii spo0A mutant and its application for butyl butyrate production.

Spo0A is a master regulator that governs the metabolic shift of solventogenic Clostridium species such as Clostridium beijerinckii. Its disruption can thus potentially cause a significant alteration of cellular physiology as well as metabolic patterns. To investigate the specific effect of spo0A disruption in C. beijerinckii, a spo0A mutant of C. beijerinckii was characterized in this study. In a batch fermentation with pH control at 6.5, the spo0A mutant accumulated butyrate and butanol up to 8.96 g/L and 3.32 g/L, respectively from 60 g/L glucose. Noticing the unique phenotype of the spo0A mutant accumulating both butyrate and butanol at significant concentrations, we decided to use the spo0A mutant for the production of butyl butyrate that can be formed by the condensation of butyrate and butanol during the ABE fermentation in the presence of the enzyme lipase. Butyl butyrate is a value-added chemical that has numerous uses in the food and fragrance industry. Moreover, butyl butyrate as a biofuel is compatible with Jet A-1 aviation kerosene and used for biodiesel enrichment. In an initial trial of small-scale extractive batch fermentation using hexadecane as the extractant with supplementation of lipase CalB, the spo0A mutant was subjected to acid crash due to the butyrate accumulation, and thus produced only 98 mg/L butyl butyrate. To alleviate the butyrate toxicity, the biphasic medium was supplemented with 10 g/L CaCO3 and 5 g/L butanol. The butyl butyrate production was then increased up to 2.73 g/L in the hexadecane layer. When continuous agitation was performed to enhance the esterification and extraction of butyl butyrate, 3.32 g/L butyl butyrate was obtained in the hexadecane layer. In this study, we successfully demonstrated the use of the C. beijerinckii spo0A mutant for the butyl butyrate production through the simultaneous ABE fermentation, condensation, and extraction. Biotechnol. Bioeng. 2017;114: 106-112. © 2016 Wiley Periodicals, Inc.