The Ruminant sorting mechanism protects teeth from abrasives.

Dental wear due to ingestion of dust and grit has deleterious consequences. Herbivores that could not wash their food hence had to evolve particularly durable teeth, in parallel to the evolution of dental chewing surface complexity to increase chewing efficacy. The rumen sorting mechanism increases chewing efficacy beyond that reached by any other mammal and has been hypothesized to also offer an internal washing mechanism, which would be an outstanding example of an additional advantage by a physiological adaptation, but in vivo evidence is lacking so far. Here, we investigated four cannulated, live cows that received a diet to which sand was added. Silica in swallowed food and feces reflected experimental dietary sand contamination, whereas the regurgitate submitted to rumination remained close to the silica levels of the basal food. This helps explain how ruminants are able to tolerate high levels of dust or grit in their diet, with less high-crowned teeth than nonruminants in the same habitat. Palaeo-reconstructions based on dental morphology and dental wear traces need to take the ruminants' wear-protection mechanism into account. The inadvertent advantage likely contributed to the ruminants' current success in terms of species diversity.

Is a blunt sword pointless? Tooth wear impacts puncture performance in Tasmanian devil canines.

As teeth wear, their shapes change and functional features can be dulled or lost, presumably making them less effective for feeding. However, we do not know the magnitude and effect of this wear. Using Tasmanian devil canines as a case study, we investigated the impact of wear on puncture in pointed teeth. We measured aspects of shape impacted by wear (tip sharpness, height and volume) in teeth of varying wear followed by 3D printing of real and theoretical forms to carry out physical puncture tests. Tooth wear acts in two ways: by blunting tooth tips, and decreasing height and volume, both of which impact performance. Sharper tips in unworn teeth decrease the force and energy required to puncture compared with blunter worn teeth, while taller unworn teeth provide the continuous energy necessary to propagate fracture relative to shorter worn teeth. These wear-modulated changes in shape necessitate more than twice the force to drive worn teeth into ductile food and decrease the likelihood of puncture success.

Shape, size, and quantity of ingested external abrasives influence dental microwear texture formation in guinea pigs.

Food processing wears down teeth, thus affecting tooth functionality and evolutionary success. Other than intrinsic silica phytoliths, extrinsic mineral dust/grit adhering to plants causes tooth wear in mammalian herbivores. Dental microwear texture analysis (DMTA) is widely applied to infer diet from microscopic dental wear traces. The relationship between external abrasives and dental microwear texture (DMT) formation remains elusive. Feeding experiments with sheep have shown negligible effects of dust-laden grass and browse, suggesting that intrinsic properties of plants are more important. Here, we explore the effect of clay- to sand-sized mineral abrasives (quartz, volcanic ash, loess, kaolin) on DMT in a controlled feeding experiment with guinea pigs. By adding 1, 4, 5, or 8% mineral abrasives to a pelleted base diet, we test for the effect of particle size, shape, and amount on DMT. Wear by fine-grained quartz (>5/<50 µm), loess, and kaolin is not significantly different from the abrasive-free control diet. Fine silt-sized quartz (∼5 µm) results in higher surface anisotropy and lower roughness (polishing effect). Coarse-grained volcanic ash leads to significantly higher complexity, while fine sands (130 to 166 µm) result in significantly higher roughness. Complexity and roughness values exceed those from feeding experiments with guinea pigs who received plants with different phytolith content. Our results highlight that large (>95-µm) external silicate abrasives lead to distinct microscopic wear with higher roughness and complexity than caused by mineral abrasive-free herbivorous diets. Hence, high loads of mineral dust and grit in natural diets might be identified by DMTA, also in the fossil record.

Tooth wear, growth and height in rabbits (Oryctolagus cuniculus) fed pelleted or extruded diets with or without added abrasives.

Among the different factors thought to affect dental wear, dietary consistency is possibly the least investigated. To understand tooth wear of herbivorous animals consuming different dietary consistencies with different abrasive potential, we fed 14 rabbits (Oryctolagus cuniculus) exclusively with a timothy grassmeal-based diet in either pelleted or extruded form, or the same diets with an addition of 5% fine sand abrasives (mean size 130 µm). First, we offered the rabbits the pelleted and extruded diets as well as the pelleted control and pelleted abrasive diet in a two-stage preference experiment. Then, the rabbits received each diet for 2 weeks in a randomised serial feeding experiment, where each animal served as its own control. Tooth measurements for wear, growth and height were achieved using a manual calliper, endoscopic examination and CT scans. The analysis of the diets as fed showed almost identical mean particle size, but the extruded diet had a lower density (volume/mass) and softer consistency compared to the pelleted one and was favoured by most rabbits. The rabbits selected against the diet with sand during the preference experiment, possibly because it caused more tooth wear, especially on the teeth most exposed to wear along the upper tooth row (upper P4 and M1). The maxillary teeth also showed evidence of an increased chewing laterality by the end of the experiment. The extruded diet led to a significantly lower cheek teeth height than the pelleted diet, potentially due to the higher chewing effort needed for a similar dry matter intake. The results suggest that dietary hardness alone is a poor predictor of dental wear. The regrowth of the teeth matched wear consistently.

Wearing the devil down: Rate of tooth wear varies between wild and captive Tasmanian devils.

Mammalian carnivores rely on their sharp teeth to effectively kill and consume prey. However, over time this causes wear and breakage that alters tooth shape, reducing their effectiveness. Extreme tooth wear and damage is especially prevalent in species that scavenge carcasses, like the Tasmanian devil (Sarcophilus harrisii), which are well known for their voracious appetites and ability to consume almost all of a carcass, including bone. In this study, we comprehensively describe tooth wear in captive and wild devils to look for differences in the patterns and rate of wear between these environments. To do this we surveyed tooth condition in skulls from 182 wild and 114 captive devils for which age was estimated using canine over-eruption. We found the types of tooth wear documented were the same in captive and wild devils, but captive animals have less severe wear than wild devils of the same estimated age. There was no difference in the proportion of captive or wild individuals with broken canine or molar teeth; however, breakage occurred at a younger age in wild devils. Although not considered anomalous or harmful, this indicates a difference in the way teeth are being used and/or the foods consumed between captive and wild devils. We hypothesize how these results relate to differences in diet or behavior that may stem from their various feeding environments, for example, higher quality food (fresh, whole, and yet to be scavenged carcasses) provided to captive devils likely causes less wear. Further, we support management options that closely replicate wild diet items and behaviors suitable for a long-term insurance population.

Buccal dental-microwear and feeding ecology of Early Pleistocene Theropithecus oswaldi from Cueva Victoria (Spain).

Despite the scarcity of fossil specimens of Theropithecus oswaldi in Eurasia, its presence out of Africa attests to the great dispersal of this Papionini genus during the Early Pleistocene. In the present study, we analyze the buccal dental microwear of T. oswaldi (T. o. leakeyi) fossil specimens from Cueva Victoria (Southeastern Spain). This analysis is the first characterization of the feeding ecology of T. oswaldi in Europe. The buccal microwear pattern of the molar and premolar teeth of T. oswaldi from Cueva Victoria shows great similarities to that observed for the extant frugivorous forest-dwelling Mandrillus sphinx and mangabeys (Cercocebus sp.)-both species adapted to durophagous dietary habits-while significantly different from that observed for the gramnivorous Theropithecus gelada. These results suggest that T. oswaldi from Cueva Victoria could have exploited both hard-shelled fruits or seeds and succulent fruits from open and forested Mediterranean ecosystems.

Dust and grit matter: abrasives of different size lead to opposing dental microwear textures in experimentally fed sheep (Ovis aries).

External abrasives ingested along with the herbivore diet are considered main contributors to dental wear, though how the different sizes and concentrations of these abrasives influence wear remains unclear. Dental microwear texture analysis (DMTA) is an established method for dietary reconstruction which describes a tooth's surface topography on a micrometre scale. The method has yielded conflicting results as to the effect of external abrasives. In the present study, a feeding experiment was performed on sheep (Ovis aries) fed seven diets of different abrasiveness. Our aim was to discern the individual effects of size (4, 50 and 130 µm) and concentration (0%, 4% and 8% of dry matter) of abrasives on dental wear, applying DMTA to four tooth positions. Microwear textures differed between individual teeth, but surprisingly, showed no gradient along the molar tooth row, and the strongest differentiation of experimental groups was achieved when combining data of all maxillary molars. Overall, a pattern of increasing height, volume and complexity of the tooth's microscopic surface appeared with increasing size of dietary abrasives, and when compared with the control, the small abrasive diets showed a polishing effect. The results indicate that the size of dietary abrasives is more important for dental microwear texture traces than their concentration, and that different sizes can have opposing effects on the dietary signal. The latter finding possibly explains conflicting evidence from previous experimental DMTA applications. Further exploration is required to understand whether and how microscopic traces created by abrasives translate quantitatively to tissue loss.

The dental microwear of hard-object feeding in laboratory Sapajus apella and its implications for dental microwear formation.

OBJECTIVES: This study seeks to determine if (a) consumption of hard food items or a mixture of food items leads to the formation of premolar or molar microwear in laboratory capuchin monkeys (Sapajus apella) in one feeding session and (b) rates of microwear formation are associated with the number of food items consumed. MATERIALS AND METHODS: Five adult male capuchins were used in two experiments, one where they were fed unshelled Brazil nuts, and the other where they were fed a mixture of food items. Dental impressions were taken before and after each feeding session. Epoxy casts made from those impressions then were used in SEM analyses of rates of microwear formation. Upper and lower premolars and molars were analyzed. Qualitative comparisons were made and Spearman's rank-order correlations used to examine the relationship between rates of microwear formation and number of Brazil nuts consumed. RESULTS: Premolars and molars generally showed new microwear in the form of pits and scratches. However, the incidence of those features was low (0-6%). Rates of microwear formation were highest during the consumption of Brazil nuts. DISCUSSION: Variations in the rate of microwear formation on the premolars likely reflected patterns of ingestion whereas consistency in the rate of microwear on the molars likely reflected patterns of chewing. While dental microwear formation seemed to be correlated with the number of hard objects consumed, rates did differ between individuals. Differences in results between the two experiments demonstrate some of the limitations in our knowledge of dental microwear formation.

Controlled feeding experiments with diets of different abrasiveness reveal slow development of mesowear signal in goats (Capra aegagrus hircus).

Dental mesowear is applied as a proxy to determine the general diet of mammalian herbivores based on tooth-cusp shape and occlusal relief. Low, blunt cusps are considered typical of grazers and high, sharp cusps typical of browsers. However, how internal or external abrasives impact mesowear, and the time frame the wear signature takes to develop, still need to be explored. Four different pelleted diets of increasing abrasiveness (lucerne, grass, grass and rice husks, and grass, rice husks and sand) were fed to four groups of a total of 28 adult goats in a controlled feeding experiment over a 6-month period. Tooth morphology was captured by medical CT scans at the beginning and end of the experiment. These scans, as well as the crania obtained post mortem, were scored using the mesowear method. Comparisons between diet groups showed few significant differences after 6 months, irrespective of whether CT scans or the real teeth were scored. Only when assessing the difference in signal between the beginning and the end of the experiment did relevant, significant diet-specific effects emerge. Diets containing lower phytolith content caused a more pronounced change in mesowear towards sharper cusps/higher reliefs, while the feed containing sand did not result in more extreme changes in mesowear when compared with the same feed without sand. Our experiment suggests that the formation of a stable and hence reliable mesowear signal requires more time to develop than 6 months.

Tooth Wear Inclination in Great Ape Molars.

Primate dietary diversity is reflected in their dental morphology, with differences in size and shape of teeth. In particular, the tooth wear angle can provide insight into a species' ability to break down certain foods. To examine dietary and masticatory information, digitized polygon models of dental casts provide a basis for quantitative analysis of wear associated with tooth attrition. In this study, we analyze and compare the wear patterns of Pongo pygmaeus, Gorilla gorillagorilla and Pan troglodytes schweinfurthii lower molars, focusing on the degree of inclination of specific wear facets. The variation in wear angles appears to be indicative of jaw movements and the specific stresses imposed on food during mastication, reflecting thus the ecology of these species. Orangutans exhibit flatter wear angles, more typical of a diet consisting of hard and brittle foods, while gorillas show a wear pattern with a high degree of inclination, reflecting thus their more leafy diet. Chimpanzees, on the other hand, show intermediate inclinations, a pattern that could be related to their highly variable diet. This method is demonstrated to be a powerful tool for better understanding the relationship between food, mastication and tooth wear processes in living primates, and can be potentially used to reconstruct the diet of fossil species.

Dental disorders in brown howler monkeys (Alouatta guariba clamitans) maintained in captivity.

BACKGROUND: The aim of this study was to investigate dental disorders of brown howler monkeys maintained in captivity. The hypothesis is that the identification and diagnosis of the lesions may contribute to control and prevention. METHODS: Sixteen intact brown howler monkeys (Alouatta guariba clamitans), eight females and eight males, weighing from 3.9 to 6.8 kg, were studied. Under general anesthesia, the teeth were evaluated by visual inspection, probing, palpation, and intra-oral radiographic exam. The findings were registered on a dental chart specific for primates. RESULT: Of the 16 monkeys evaluated in the present study, 94% (n = 15) had some type of dental disorder. The lesions observed were dental calculus (88%), dental wear (81%), missing teeth (38%), gingivitis (19%), gingival recession (6%), dental fracture (19%), pulp exposure (19%), and dental staining (25%). CONCLUSIONS: Alouatta guariba clamitans maintained in captivity have a high rate of dental problems.

Dust in the wind: How climate variables and volcanic dust affect rates of tooth wear in Central American howling monkeys.

OBJECTIVES: Two factors have been considered important contributors to tooth wear: dietary abrasives in plant foods themselves and mineral particles adhering to ingested food. Each factor limits the functional life of teeth. Cross-population studies of wear rates in a single species living in different habitats may point to the relative contributions of each factor. MATERIALS AND METHODS: We examine macroscopic dental wear in populations of Alouatta palliata (Gray, 1849) from Costa Rica (115 specimens), Panama (19), and Nicaragua (56). The sites differ in mean annual precipitation, with the Panamanian sites receiving more than twice the precipitation of those in Costa Rica or Nicaragua (∼3,500 mm vs. ∼1,500 mm). Additionally, many of the Nicaraguan specimens were collected downwind of active plinian volcanoes. Molar wear is expressed as the ratio of exposed dentin area to tooth area; premolar wear was scored using a ranking system. RESULTS: Despite substantial variation in environmental variables and the added presence of ash in some environments, molar wear rates do not differ significantly among the populations. Premolar wear, however, is greater in individuals collected downwind from active volcanoes compared with those living in environments that did not experience ash-fall. DISCUSSION: Volcanic ash seems to be an important contributor to anterior tooth wear but less so in molar wear. That wear is not found uniformly across the tooth row may be related to malformation in the premolars due to fluorosis. A surge of fluoride accompanying the volcanic ash may differentially affect the premolars as the molars fully mineralize early in the life of Alouatta.

Tooth length and incisal wear and growth in guinea pigs (Cavia porcellus) fed diets of different abrasiveness.

Dental diseases are among the most important reasons for presenting guinea pigs (Cavia porcellus) and other rodents to veterinary clinics, but the aetiopathology of this disease complex is unclear. Clinicians tend to believe that the ever-growing teeth of rabbits and rodents have a constant growth that needs to be worn down by the mastication of an appropriate diet. In this study, we tested the effect of four different pelleted diets of increasing abrasiveness [due to both internal (phytoliths) and external abrasives (sand)] or whole grass hay fed for 2 weeks each in random order to 16 guinea pigs on incisor growth and wear, and tooth length of incisors and cheek teeth. There was a positive correlation between wear and growth of incisors. Tooth lengths depended both on internal and external abrasives, but only upper incisors were additionally affected by the feeding of whole hay. Diet effects were most prominent in anterior cheek teeth, in particular M1 and m1. Cheek tooth angle did not become shallower with decreasing diet abrasiveness, suggesting that a lack of dietary abrasiveness does not cause the typical 'bridge formation' of anterior cheek teeth frequently observed in guinea pigs. The findings suggest that other factors than diet abrasiveness, such as mineral imbalances and in particular hereditary malocclusion, are more likely causes for dental problems observed in this species.

Patterns of Dental Macrowear in Subfossil Lemur catta from Ankilitelo Cave, Madagascar: Indications of Ecology and Habitat Use over Time.

The Ankilitelo cave site, Madagascar, contains a large collection of extant and recently extinct subfossil lemurs including the extant taxa Lemur catta and Eulemur rufifrons, which today are rarely found in sympatry. Dates for this assemblage range from 300 to 13,000 BP, though known dates for extinct primate specimens range between ∼500 and ∼600 BP. Data from Ankilitelo L. catta and E. rufifrons were compared to assess tooth wear in sympatric, related forms. Wear was scored using an ordinal scale from 0 to 5. For P4, M1 and M2, E. rufifrons displays significantly more wear than L. catta. Ankilitelo represents one of the most southerly samples of E. rufifrons, and wear data suggest that in the recent (i.e. Holocene) past, their diet near the edges of their geographic range included mechanically challenging foods. In contrast, sympatric L. catta was using foods in this transitional humid-dry forest with succulent woodlands that were not significantly impacted by recent human actions, and for which they were dentally adapted. Results also suggest that this non-gallery forest habitat may be the 'adaptive home' of L. catta, given the lack of notable tooth wear when compared to populations currently living in tamarind-dominated riverine gallery forests.

Effects of dietary fracture toughness and dental wear on chewing efficiency in geladas (Theropithecus gelada).

Chewing efficiency has been associated with fitness in mammals, yet little is known about the behavioral, ecological, and morphological factors that influence chewing efficiency in wild animals. Although research has established that dental wear and food material properties independently affect chewing efficiency, few studies have addressed the interaction among these factors. We examined chewing efficiency, measured as mean fecal particle size, as a function of seasonal shifts in diet (and corresponding changes in food fracture toughness) in a single breeding population of a grazing primate, the gelada monkey, at Guassa, Ethiopia. We also measured dental topographic traits (slope, angularity, and relief index) and relative two- and three-dimensional shearing crest lengths in a cross-sectional wear series of gelada molars. Chewing efficiency decreased during the dry season, a pattern corresponding to the consumption of foods with higher fracture toughness. Older individuals experienced the most pronounced decreases in chewing efficiency between seasons, implicating dental wear as a causal factor. This pattern is consistent with our finding that dental topographic metrics and three-dimensional relative shearing crest lengths were lowest at the last stage of wear. Integrating these lines of behavioral, ecological, and morphological evidence provides some of the first empirical support for the hypothesis that food fracture toughness and dental wear together contribute to chewing efficiency. Geladas have the highest chewing efficiencies measured thus far in primates, and may be analogous to equids in their emphasis on dental design as a means of particle size reduction in the absence of highly specialized digestive physiology.

Sources of tooth wear variation early in life among known-aged wild ring-tailed lemurs (Lemur catta) at the Bezà Mahafaly Special Reserve, Madagascar.

Ring-tailed lemurs (Lemur catta) at the Bezà Mahafaly Special Reserve (BMSR), Madagascar display a high frequency of individuals with notable and sometimes extreme tooth wear. Adult lemurs display a range of tooth wear even among individuals of the same age, but we do not know at what age this variation first appears. This study's goal was to determine whether wear variation occurs in younger wild lemurs. Based on the decade-long study of ring-tailed lemur feeding and dental ecology at BMSR, we hypothesized that younger, natal lemurs (under 5 years of age), would display variation in their degree of tooth wear that would correspond to microhabitat differences, given differences in food availability in different troops' home ranges. We also hypothesized that wear would differ between sexes at this young age, given differences in feeding between males and females in this population. Hypotheses were tested using dental topographic analyses using dental impressions collected from known-aged lemurs across 10 years at BMSR. Results illustrate significant differences in wear-related tooth topography (i.e., relief and slope, presented here as "occlusal lift") for microhabitat, sex and troop affiliation among lemurs under 5 years of age in this population. Although, all lemurs in this population consume mechanically challenging tamarind fruit, those in more disturbed habitats eat additional introduced foods, some of which are also mechanically challenging. Thus, dietary variation is the likely cause of variation in tooth wear. The wear variation we show at a young age suggests caution when assigning age based on tooth wear in living and fossil primates. These wear-related tooth shape changes early in life, which reflects sex, habitat variation and levels of anthropogenic disturbance, may potentially impact reproductive fitness later in life.

Co-occurrence of periodontal lesions and dental wear in incisor and masticatory teeth in two sheep flocks in Brazil.

BACKGROUND: Periodontitis and tooth wear are multifactorial diseases with distinct etiopathogenesis that affect the health, feed efficiency and welfare of sheep. METHODS: This study evaluated the co-occurrence of tooth wear and periodontal lesions in 129 ewes from two Brazilian flocks, clinically classified the lesions and presence of dental calculus, and identified potential pathogens in the dental biofilm of 63 ewes by polymerase chain reaction. RESULTS: Of the 129 ewes included in the study, 75 presented periodontal lesions, while all animals presented tooth wear and dental calculus. Of the animals with periodontal lesions, 16.2% had lesions in incisor teeth and 52.7% in masticatory teeth. Regarding excessive tooth wear, 38.6% had severe wear on the incisor teeth and 89.1% on the masticatory teeth. Ewes older than 36 months had a higher frequency of periodontal lesions in incisor teeth (p < 0.001) and a greater amount of dental calculus (p < 0.001), but there was no association between tooth wear and animal age. Fusobacterium nucleatum, Tannerella forsythia and Fusobacterium necrophorum predominated in periodontal lesions. LIMITATION: This study is limited by the small sample size and lack of diagnostic imaging to assess periodontal disease. CONCLUSION: The co-occurrence of periodontal lesions and excessive dental wear involving both the incisor and masticatory teeth suggests that although the two diseases have different aetiologies, they likely have common risk factors.

Assessing tooth wear progression in non-human primates: a longitudinal study using intraoral scanning technology.

Intraoral scanners are widely used in a clinical setting for orthodontic treatments and tooth restorations, and are also useful for assessing dental wear and pathology progression. In this study, we assess the utility of using an intraoral scanner and associated software for quantifying dental tissue loss in non-human primates. An upper and lower second molar for 31 captive hamadryas baboons (Papio hamadryas) were assessed for dental tissue loss progression, giving a total sample of 62 teeth. The animals are part of the Southwest National Primate Research Center and were all fed the same monkey-chow diet over their lifetimes. Two molds of each dentition were taken at either two- or three-year intervals, and the associated casts scanned using an intraoral scanner (Medit i700). Tissue loss was calculated in WearCompare by superimposition of the two scans followed by subtraction analysis. Four individuals had dental caries, and were assessed separately. The results demonstrate the reliability of these techniques in capturing tissue loss data, evidenced by the alignment consistency between scans, lack of erroneous tissue gain between scans, and uniformity of tissue loss patterns among individuals (e.g., functional cusps showing the highest degree of wear). The average loss per mm2 per year for all samples combined was 0.05 mm3 (0.04 mm3 for females and 0.08 mm3 for males). There was no significant difference in wear progression between upper and lower molars. Substantial variation in the amount of tissue loss among individuals was found, despite their uniform diet. These findings foster multiple avenues for future research, including the exploration of wear progression across dental crowns and arcades, correlation between different types of tissue loss (e.g., attrition, erosion, fractures, caries), interplay between tissue loss and microwear/topographic analysis, and the genetic underpinnings of tissue loss variation.

Dental wear among cercopithecid monkeys of the Taï forest, Côte d'Ivoire.

Studies of dental macrowear can be useful for understanding masticatory and ingestive behavior, life history, and for inferring dietary information from the skeletal material of extinct and extant primates. Such studies to date have tended to focus on one or two teeth, potentially missing information that can be garnered through examination of wear patterns across the tooth row. Our study measured macrowear in the postcanine teeth of three sympatric cercopithecid species from the Taï Forest, Côte d'Ivoire (Cercocebus atys, Procolobus badius, and Colobus polykomos), whose diets have been well-described. Inter-specific analyses suggest that different diets and ingestive behaviors are characterized by different patterns of wear across the molar row, with Cercocebus atys emphasizing tooth use near P4 -M1 , P. badius emphasizing a large amount of tooth use near M2 -M3 , and Colobus polykomos exhibiting wear more evenly across the postcanine teeth. Information regarding differential tooth use across the molar row may be more informative than macrowear analysis of isolated teeth for making inferences about primate feeding behavior.

The development of an oral health charting system for koalas (Phascolarctos cinereus).

The koala is one of Australia's most highly specialized folivores with a diet exclusively of eucalyptus leaves to provide all nutritive needs and therefore requires to be free of oral disease as they are dependent on good dentition for optimal health and quality of life. We developed an oral examination methodology based on protocols for companion animals and human dentistry to chart the oral health of koalas. Thirty free-ranging koalas from South-East Queensland, Australia were examined for general body and oral health. Inspection of the oral cavity was conducted for the presence or absence of the indicators oforal disease such as caries or periodontal disease. Univariate and multivariate analyses were performed on the examination data and a prototype oral health chart developed. The prototype was then trialled and the methodology validated by the Kappa statistic using ten additional koalas examined by four multidisciplinary personnel involved in koala care. Trauma associated fractures, tooth displacement, abnormal occlusion and tooth wear compacted vegetation, extrinsic stain deposits, periodontal bone loss, gingivitis, tooth mobility, and calculus were present in the oral cavities of the examined koalas. A system of scoring between 0 and 3 was constructed in accordance with current koala general health charting formats. Validation of the charting method using Kappa coefficients of agreement statistics indicated that there was a good agreement among observers on recorded results except for inflammation and calculus scoring. Modifications were made and visual aids and index scales produced to further assist observers. Oral health surveillance has been proven in other species to be significant in diagnosing physiological disturbances derived from environmental genetic, and developmental causes. Veterinarians, dental researchers, and koala husbandry personnel will benefit in using this charting method and reporting the oral health of koala populations in their future findings. This unique form of oral health monitoring would be adaptable to other mammals.