Footprint evidence of early hominin locomotor diversity at Laetoli, Tanzania.

Bipedal trackways discovered in 1978 at Laetoli site G, Tanzania and dated to 3.66 million years ago are widely accepted as the oldest unequivocal evidence of obligate bipedalism in the human lineage1-3. Another trackway discovered two years earlier at nearby site A was partially excavated and attributed to a hominin, but curious affinities with bears (ursids) marginalized its importance to the paleoanthropological community, and the location of these footprints fell into obscurity3-5. In 2019, we located, excavated and cleaned the site A trackway, producing a digital archive using 3D photogrammetry and laser scanning. Here we compare the footprints at this site with those of American black bears, chimpanzees and humans, and we show that they resemble those of hominins more than ursids. In fact, the narrow step width corroborates the original interpretation of a small, cross-stepping bipedal hominin. However, the inferred foot proportions, gait parameters and 3D morphologies of footprints at site A are readily distinguished from those at site G, indicating that a minimum of two hominin taxa with different feet and gaits coexisted at Laetoli.

Accuracy of edentulous full-arch implant impression: An in vitro comparison between conventional impression, intraoral scan with and without splinting, and photogrammetry.

OBJECTIVES: The purpose of this in vitro study was to compare the trueness and precision of complete arch implant impressions using conventional impression, intraoral scanning with and without splinting, and stereophotogrammetry. MATERIALS AND METHODS: An edentulous model with six implants was used in this study. Four implant impression techniques were compared: the conventional impression (CI), intraoral scanning (IOS) without splinting, intraoral scanning with splinting (MIOS), and stereophotogrammetry (SPG). An industrial blue light scanner was used to generate the baseline scan from the model. The CI was captured with a laboratory scanner. The reference best-fit method was then applied in the computer-aided design (CAD) software to compute the three-dimensional, angular, and linear discrepancies among the four impression techniques. The root mean square (RMS) 3D discrepancies in trueness and precision between the four impression groups were analyzed with a Kruskal-Wallis test. Trueness and precision between single analogs were assessed using generalized estimating equations. RESULTS: Significant differences in the overall trueness (p = .017) and precision (p < .001) were observed across four impression groups. The SPG group exhibited significantly smaller RMS 3D deviations than the CI, IOS, and MIOS groups (p < .05), with no significant difference detected among the latter three groups (p > .05). CONCLUSIONS: Stereophotogrammetry showed superior trueness and precision, meeting misfit thresholds for implant-supported complete arch prostheses. Intraoral scanning, while accurate like conventional impressions, exhibited cross-arch angular and linear deviations. Adding a splint to the scan body did not improve intraoral scanning accuracy.

Measuring mantled howler monkey (Alouatta palliata) testes via parallel laser photogrammetry: Expanding the use of noninvasive methods.

Parallel laser photogrammetry (PLP), which consists of attaching two or three parallel laser beams at a known inter-beam distance to a camera, can be used to collect morphological measurements of organisms noninvasively. The lasers project onto the photo being taken, and because the inter-beam distance is known, they act as a scale for image analysis programs like ImageJ. Traditionally, this method has been used to measure larger morphological traits (e.g., limb length, crown-rump length) to serve as proxies for overall body size, whereas applications to smaller anatomical features remain limited. To that end, we used PLP to measure the testes of 18 free-living mantled howler monkeys (Alouatta palliata) at La Selva Biological Station, Costa Rica. We tested whether this method could reliably measure this relatively small and globular morphology, and whether it could detect differences among individuals. We tested reliability in three ways: within-photo (coefficient of variation [CV] = 4.7%), between-photo (CV = 5.5%), and interobserver (intraclass correlation = 0.92). We found an average volume of 36.2 cm3 and a range of 16.4-54.4 cm3, indicating variation in testes size between individuals. Furthermore, these sizes are consistent with a previous study that collected measurements by hand, suggesting that PLP is a useful method for making noninvasive measurements of testes.

Prospective study of nasal growth in bilateral cleft lip and palate patients after naso-alveolar moulding and primary columella lengthening compared to controls at 5, 10 and 20 years.

INTRODUCTION: A short columella, wide nostrils and a flat nasal tip are common features in patients with bilateral complete cleft lip and palate (BCLP). The objective of this study was to evaluate nasal morphology during growth in patients treated with naso-alveolar moulding (NAM) and primary surgical columella lengthening (PCL) compared with matched non-cleft individuals. STUDY DESIGN: Prospective longitudinal case-control study. PARTICIPANTS AND METHODS: Thirty-four consecutively treated BCLP patients at 5 and 10 years and at the end of growth (19.7 ± 2.0 years) were compared through normalized photogrammetry to a control of 34 age and sex-matched non-cleft individuals. Regression Models for Panel Data assessed how nasal measurements were influenced by surgery, age and gender. RESULTS: Nasal protrusion was equal to non-cleft controls at all ages. Length of the columella was also comparable to controls at 5 and 10 years, but significantly shorter at the end of growth. Inter-alar and nasal tip width and nasolabial angle were significantly wider than controls at all ages: More than 60% of the patients have asked for correction of the nasal width, but no early surgery for columella lengthening was needed. CONCLUSIONS: NAM and PCL have provided a nasal projection close to that of non-cleft individuals until adulthood, while length of the columella was physiological at 5 and 10, but shorter than controls at age 20. Width of the nasal tip and width of the alar bases were significantly wider than the controls and eventually required secondary nasal width correction in over two thirds of the sample.

A Deep Learning Model for Markerless Pose Estimation Based on Keypoint Augmentation: What Factors Influence Errors in Biomechanical Applications?

In biomechanics, movement is typically recorded by tracking the trajectories of anatomical landmarks previously marked using passive instrumentation, which entails several inconveniences. To overcome these disadvantages, researchers are exploring different markerless methods, such as pose estimation networks, to capture movement with equivalent accuracy to marker-based photogrammetry. However, pose estimation models usually only provide joint centers, which are incomplete data for calculating joint angles in all anatomical axes. Recently, marker augmentation models based on deep learning have emerged. These models transform pose estimation data into complete anatomical data. Building on this concept, this study presents three marker augmentation models of varying complexity that were compared to a photogrammetry system. The errors in anatomical landmark positions and the derived joint angles were calculated, and a statistical analysis of the errors was performed to identify the factors that most influence their magnitude. The proposed Transformer model improved upon the errors reported in the literature, yielding position errors of less than 1.5 cm for anatomical landmarks and 4.4 degrees for all seven movements evaluated. Anthropometric data did not influence the errors, while anatomical landmarks and movement influenced position errors, and model, rotation axis, and movement influenced joint angle errors.

Measurements of oculo-palpebral landmarks and evaluation of patient's head position.

PURPOSE: Keeping the head in a neutral position is requisite for glasses/lenses/head-up designs, the suitability of oculo-plastic surgery and for the grading the eye shift. Anatomically incompatible glasses are one of the common problems affecting accommodation, reducing comfort and disturbing by causing symptoms such as dizziness and nausea. The oculo-palpebral measurements act as a key determinant in symmetrical facial attractiveness. This study aims to investigate the most effective oculo-palpebral landmarks, head-neutral as the ideal position, taking into account of individual anatomical differences of these patients. METHODS: 100 females and 100 males aged between 18 and 20 years were photographed. Digital photogrammetric measurements were made with the ImageJ program. Interpupillary and interhelical distances, besides bilateral palpebral fissure length and height, and iris diameter were calculated on front-facing photographs. RESULTS: Mean interpupillary distance was measured wider in males than in females. The mean length of palpebral fissure was 31 mm; palpebral fissure height was 10 mm. These figures were valid in both eyes and gender. The interhelical distance was calculated as the mean and was measured longer in men. Since the measurement values were the same in both sexes and on both sides, they were determined as important landmarks for controlling the head-neutral position, evaluating whether there was a deviation in the eye, and measuring the numerical value when detected. CONCLUSION: It is essential to check the side-symmetry of the patient's palpebral fissure height, palpebral fissure length, diameter of iris and corneal depth during oculo-plastic invention and artificial design.

Capabilities of using UAVs and close range photogrammetry to determine short-term soil losses in forest road cut slopes in semi-arid mountainous areas.

The soil losses that are caused should be examined by monitoring the forest roads in the periods after they are built. In traditional soil loss determination studies that require intensive labour, due to difficulties in parcel setup, leaks from the connection points of the system, overflow of the material in the storage units and regular follow-up of the precipitation, etc., the system has its disadvantages. In this study, studies were carried out to evaluate the possibilities of using UAV and close range photogrammetry (CRP) methods, which are remote sensing techniques, and to determine the soil losses in forest road cut slopes in semi-arid mountainous areas. In addition, the advantages and disadvantages of the methods are discussed. A 100-m section of the secondary forest road was chosen as the study area. Data acquisition was carried out by UAV and CRP methods in the period of May 2020-November 2020. In the results of the study, the volumetric deformation per unit area results, a - 0.0060 m3m-2 erosion amount and a 0.0046 m3m-2 accumulation amount were determined by UAV. In addition, in the photogrammetric method, a - 0.0050 m3m-2 erosion amount and a 0.0031 m3m-2 accumulation amount were found. When both methods were compared temporally, the processes took approximately 2 times longer in the CRP method. In addition, while the ground sampling distance of DEMs and orthophotos produced with the UAV was 2 cm, it was obtained as 1 cm in the CRP method and terrestrial receptions were found to be 2 times higher resolution. According to the results obtained, the CRP method gives results that are more accurate in such studies.

Nasal Morphology in a Young Adult Middle-Eastern Population: A Stereophotogrammetric Analysis.

AIM: This study aimed to describe gender-specific three-dimensional morphology of the soft-tissue nose in Lebanese young adults and to explore the associations between nasal morphology with age and body mass index (BMI). MATERIALS AND METHODS: Three-dimensional photographs were captured for 176 young healthy Lebanese adults (75 males and 101 females) aged 18.1-37.68 years. Linear and angular nasal measurements were computed and compared between genders, in addition to other established norms. Associations with age and BMI were also assessed. RESULTS: All linear measurements were greater in males than in females, and only the nasolabial angle was significantly larger in females by 2.97 degrees on average. Most of the measurements were found to be larger than the Caucasian norms. A few significant correlations were found between the measurements and age or BMI. CONCLUSION: This study is the first to present the sex-specific norms for nasal morphology in the Lebanese population and highlights the presence of gender dimorphism in the majority of measurements. Additional studies are needed to validate our data and expand the associations with age and BMI. CLINICAL SIGNIFICANCE: The data offered in this study could help enhance the accuracy of facial reconstructive surgery and aid in personalized treatment planning for both medical and cosmetic nasal interventions. How to cite this article: Saadeh M, Shamseddine L, Fayyad-Kazan H, et al. Nasal Morphology in a Young Adult Middle-Eastern Population: A Stereophotogrammetric Analysis. J Contemp Dent Pract 2024;25(3):199-206.

Studying flowers in 3D using photogrammetry.

Flowers are intricate and integrated three-dimensional (3D) structures predominantly studied in 2D due to the difficulty in quantitatively characterising their morphology in 3D. Given the recent development of analytical methods for high-dimensional data, the reconstruction of flower models in three dimensions represents the limiting factor to studying flowers in 3D. We developed a floral photogrammetry protocol to reconstruct 3D models of flowers based on images taken with a digital single-lens reflex camera, a turntable and a portable lightbox. We demonstrate that photogrammetry allows a rapid and accurate reconstruction of 3D models of flowers from 2D images. It can reconstruct all visible parts of flowers and has the advantage of keeping colour information. We illustrated its use by studying the shape and colour of 18 Gesneriaceae species. Photogrammetry is an affordable alternative to micro-computed tomography (micro-CT) that requires minimal investment and equipment, allowing it to be used directly in the field. It has the potential to stimulate research on the evolution and ecology of flowers by providing a simple way to access 3D morphological data from a variety of flower types.

A workflow for the creation of photorealistic 3D cadaveric models using photogrammetry.

Three-dimensional (3D) representations of anatomical specimens are increasingly used as learning resources. Photogrammetry is a well-established technique that can be used to generate 3D models and has only been recently applied to produce visualisations of cadaveric specimens. This study has developed a semi-standardised photogrammetry workflow to produce photorealistic models of human specimens. Eight specimens, each with unique anatomical characteristics, were successfully digitised into interactive 3D models using the described workflow and the strengths and limitations of the technique are described. Various tissue types were reconstructed with apparent preservation of geometry and texture which visually resembled the original specimen. Using this workflow, an institution could digitise their existing cadaveric resources, facilitating the delivery of novel educational experiences.

Digital pair-matching of iliac bones: pilot study on a three-dimensional approach with models acquired through stereophotogrammetry.

Three-dimensional (3D) pair-matching has brought about an innovative approach for the analysis of commingled skeletal remains, and it has been tested on bone models acquired through CT and laser scans. Here, 3D models of 40 innominate bones (20 left and 20 right) of 20 documented male individuals from a cemeterial skeletal collection were acquired through a stereophotogrammetric device (VECTRA M3, Canfield Scientific, Inc.). The ventral iliac surface was chosen as the anatomical region of interest (ROI) for the analysis. Each left ROI was mirrored and superimposed on the matching right ROI (contralateral element from the same individual) and mismatching ROIs (contralateral elements from different individuals). The point-to-point distance between models was calculated through the Vectra Analysis Module (VAM) software and the root mean square (RMS) point-to-point distance value was used to evaluate the sorting performance of the method, in terms of sensitivity and specificity rates. Differences in RMS between matches and mismatches were investigated through a Student's t test (p < 0.05). The state of preservation of the remains was assessed following an index of anatomical completeness and differences in RMS distances of true matches according to different anatomical completeness were assessed through the Mann-Whitney test (p < 0.05). RMS point-to-point distances of matches and mismatches were significantly different (p < 0.01), being the matches lower than mismatches. The RMS threshold of 2.9 mm identified all the true pairs; the test was 100% sensitive and 51% specific. The RMS of matches with a better state of preservation are significantly lower than the less preserved matches (p < 0.05). In general, a low RMS distance value may indicate a true match, being it to be further verified. The 3D approach for sorting innominate bones provides a valid screening test that could complete subjective and osteometric methods with numerical evidence of the match. Preliminary data suggest a possible relation between RMS distance values and taphonomic condition, which would benefit from further research.

Measuring asymmetry in facial morphea via 3-dimensional stereophotogrammetry.

BACKGROUND: Objectively determining tissue loss in craniofacial morphea is challenging. However, 3-dimensional (3D) stereophotogrammetry is a noninvasive modality that may be a useful adjunct. OBJECTIVE: To prospectively evaluate 3D stereophotogrammetry in the assessment of craniofacial linear morphea. METHODS: Participants underwent clinical, quality-of-life, and 3D-stereophotogrammetry assessments. Traditional photographs and 3D-stereophotogrammetry images were rated as mild, moderate, or severe by 2 experts and 2 nonexperts. In addition, interrater and intrarater reliability (on delayed rescoring) were calculated. RESULTS: Of 23 patients with craniofacial morphea, 3D stereophotogrammetry detected pathologic asymmetry in 14 (20.6%) patients. Providers rated patients as more severely affected when using 3D stereophotogrammetry versus when using traditional photographs (19% severe on 3D stereophotogrammetry vs 0% severe on traditional photographs, P = .004). Qualitative ratings of both traditional and 3D images showed high inter- and intrarater reliability between experts and nonexperts alike. Physicians' Global Assessment of Damage scores correlated with mouth asymmetry (P = .0021), cheek asymmetry (P = .04), and 3D-stereophotogrammetry ratings (median, mild: 27.5 vs moderate: 46.5 vs severe: 64, P = .0152). Lower face asymmetry correlated with worse quality-of-life scores (P = .013). LIMITATIONS: Small sample size and cross-sectional design. CONCLUSION: 3D stereophotogrammetry can reliably detect and quantify asymmetry in craniofacial morphea with greater sensitivity than that observed with traditional assessment alone. 3D stereophotogrammetry may be a useful adjunct to clinical examination.

Comparison of Manual (2D) and Digital (3D) Methods in the Assessment of Simulated Facial Edema.

BACKGROUND: An edema assessment following dental surgeries is essential to improving the dental surgeon's technique and, consequentially, patient comfort. PURPOSE: Two-dimensional (2D) methods are limited in analyzing 3-dimensional (3D) surfaces. Currently, 3D methods are used to investigate postoperative swelling. However, there are no studies that directly compare 2D and 3D methods. The goal of this study is to directly compare 2D and 3D methods used in the assessment of postoperative edema. STUDY DESIGN AND SAMPLE: The investigators implemented a prospective, cross-sectional study with each subject serving as its own control. The sample was composed of dental student volunteers without facial deformities. PREDICTOR VARIABLE: The predictor variable is the method used to measure edema. After simulating edema, manual (2D) and digital (3D) techniques were used to measure edema. The manual method used direct facial perimeter measurements. The two digital methods were photogrammetry using a smartphone (iPhone 11, Apple Inc, Cupertino, California), and facial scanning with a smartphone application (Bellus3D FaceApp, Bellus3D Inc, Campbell, California) [3D measurements] MAIN OUTCOME VARIABLE: The coefficient of variation (CV) (CV = standard deviation /mean) was used to assess homogeneity of edema measurements. ANALYSIS: The Shapiro-Wilk and equal variance tests were applied to assess data homogeneity. Next, one-way analysis of variance was performed, followed by a correlation analysis. Finally, the data were submitted to Tukey's test. The statistical significance threshold was set at 5% (P < .05). RESULTS: The sample was composed of 20 subjects aged 18-38 years. The CV showed higher values using the manual (2D) method (47%; 4.88% ± 2.99), compared with the photogrammetry method (18%; 8.55 mm ± 1.52) and the smartphone application (21%; 8.97 mm ± 1.93). A statistically significant difference was observed between the manual method values and those of the other two groups (P < .001). There was no difference between the facial scanning and photogrammetry groups (3D methods) (P = .778) CONCLUSION AND RELEVANCE: Both digital measuring methods (3D) demonstrated greater homogeneity than the manual method in analyzing facial distortions caused by the same swelling simulation. Therefore, it can be affirmed that digital methods may be more reliable that manual methods for assessing facial edema.

Three-dimensional evaluation of social smile asymmetry in patients with unilateral impacted maxillary canine: a 3D stereophotogrammetry study.

OBJECTIVE: This study aimed to evaluate social smile asymmetry in patients with unilateral impacted maxillary canine on 3D stereophotogrammetric images. MATERIAL AND METHODS: The 3D social smile images of participants with unilateral impacted maxillary canine (n:20) and without impaction as a control group (n:20) were included. The images were recorded with a hand-held 3D stereophotogrammetry device (Fuel3D® Scanify®) and Geomagic Essentials 2 reverse engineering software were used for analyses. After the orientation process of the 3D records, the tissues around the smile area were divided into five morphological regions: cheek, upper lip lateral and medial, and lower lip lateral and medial. The deviation margins in the negative and positive directions for the 95% mesh rate and the total percentages of meshes between - 0.5- and + 0.5-mm deviations were calculated. ICC, paired samples t test, independent samples t test, and the Mann-Whitney U test were used for statistical analyses. RESULTS: In individuals with impacted canine, the amount of maximum positive deviation in the upper lip medial was 5.64 mm ± 1.46 and maximum negative deviation was - 4.6 mm ± 1.17. In the control group, mean of deviation limits for all parameters was less than 1.19 mm ± 2.62, while in individuals with unilateral impacted maxillary canine, the maximum value was 8.34 mm ± 2.23. The mesh percentage between - 0.5 and 0.5-mm deviations was over 95% in all morphological areas in the control group, while in the impacted canine group, the number of meshes within the specified deviation limits was less than 95%. CONCLUSION: Individuals with unilateral impacted maxillary canine exhibit greater asymmetry in social smile compared to the control group, with the asymmetry being most prominent near the corners of the mouth and cheeks. CLINICAL RELEVANCE: Amount of asymmetry was higher in impaction group compared to the control group in social smile. The quantification of a possible smile asymmetry due to the impacted canine is crucial for the diagnosis and treatment planning of orthodontic and/or orthognathic cases for ideal aesthetic results. Hence, smile asymmetry should not be overlooked and should be considered in diagnosis and treatment planning.

What is the impact of miniscrew-assisted rapid palatal expansion on the midfacial soft tissues? A prospective three-dimensional stereophotogrammetry study.

OBJECTIVES: To evaluate the midfacial soft tissue changes of the face in patients treated with miniscrew-assisted rapid palatal expansion (MARPE). MATERIALS AND METHODS: 3D facial images and intra-oral scans (IOS) were obtained before expansion (T0), immediately after completion of expansion (T1), and 1 year after expansion (T2). The 3D images were superimposed and two 3D distance maps were generated to measure the midfacial soft tissue changes: immediate effects between timepoints T0 and T1 and overall effects between T0 and T2. Changes of the alar width were also measured and dental expansion was measured as the interpremolar width (IPW) on IOS. RESULTS: Twenty-nine patients (22 women, 7 men, mean age 25.9 years) were enrolled. The soft tissue in the regions of the nose, left of philtrum, right of philtrum, and upper lip tubercle demonstrated a statistically significant anterior movement of 0.30 mm, 0.93 mm, 0.74 mm, and 0.81 mm, respectively (p < 0.01) immediately after expansion (T0-T1). These changes persisted as an overall effect (T0-T2). The alar width initially increased by 1.59 mm, and then decreased by 0.08 mm after 1 year, but this effect was not significant. The IPW increased by 4.58 mm and remained stable 1 year later. There was no significant correlation between the increase in IPW and alar width (r = 0.35, p = 0.06). CONCLUSIONS: Our findings indicate that MARPE results in significant but small changes of the soft tissue in the peri-oral and nasal regions. However, the clinical importance of these findings is limited. CLINICAL RELEVANCE: MARPE is an effective treatment modality to expand the maxilla, incurring only minimal and clinically insignificant changes to the midfacial soft tissues.

How Do the Faces of Kyrgyz Beauties Look? A Photogrammetric Analysis of Beauty Pageant Winners.

The aim of this study was to assess how the eyes of Kyrgyz beauties look through an anthropometric analysis of beauty pageant winners. Eleven winners of the Miss Kyrgyzstan contest (2011-2021) were included. Ten other beauty contest winners were added, resulting in a total of 21 beauties who were included. The horizontal corneal diameter, which is 11.75 mm, was used as a standard distance. Other distances were calculated in millimeters based on the proportions of the pixels measured. Twenty-six distances (face: 10, eyebrows: 2, eyes: 4, nose: 4, lips: 4, and chin: 2) and 9 angles (forehead-brow, cantal tilt, 5 face angles, the mandible angle, and the chin angle) were measured. Thereafter, 16 indices (forehead: 1, eyes: 5, nose: 4, lips and chin: 3, and contours 3) were calculated. The forehead-brow angle was 82.2±7.2 degrees. The canthal tilt was 9.0±2.0 degrees. The overall face angles 1 and 2 were 108.6±4.1 degrees and 69.6±2.3 degrees, respectively. The midface angles 1 and 2 were 129.9±3.8 degrees and 125.1±3.9 degrees, respectively. The lower face angle was 139.6±4.1 degrees. The mandible angle and chin angle were 136.9±4.0 degrees and 106.0±4.0 degrees, respectively. The ratio of forehead height to total face height was 0.33±0.03. The ratio of nose height to total face height was 0.25±0.02. The lower face width/face width ratio was 0.82±0.05. The ratio of face width to total face height was 0.72±0.03. The ratio of midface height to total face height was 0.34±0.02. The data from this study might serve as the recommended esthetic proportions for performing plastic surgical procedures.

Nasal Anthropometric Analysis in Turkish Rhinoplasty Patients.

This study aimed to determine the mean values of the nasal anthropometric measurements through 2-dimensional photogrammetry in for rhinoplasty patients. The study group included 72 healthy individuals, 36 men, and 36 women. The patients were aged 18 to 42 years. All patients had undergone primary rhinoplasty in our clinic between 2013 and 2020. Seven landmarks were identified from the preoperative photographs taken with the patient's head in neutral position in the frontal and lateral planes. Five distances (total nasal length, nasal bridge length, morphological nose width, alar length, and nasal tip protrusion) and 2 angles (nasofrontal and nasolabial) measurements were calculated. We noted a statistically significant difference between the male and female sexes in terms of total nasal length and morphological nose width (P<0.05). The results were compared with the nasal anthropometric measurements reported in the literature for the Turkish population as well as other ethnic groups. We believe results of this study may facilitate preoperative planning in Turkish patients who request rhinoplasty and improve the success rate of the surgery.

Extended Superficial Musculoaponeurotic System Face-Lift With Vertical Vector for Asian Patients: A 3-Dimensional Analysis of Facial Contour.

In this study, the authors report the experience of extended superficial musculoaponeurotic system (SMAS) face-lift with the vertical vector in Asian ethnicity and investigate the 3-dimensional change of facial contour. A total of 32 patients with Korean ethnicity underwent extended SMAS face-lift with vertical vector from 2015 to 2018. Patients with aging face were included for the study subjects, whereas those who were diagnosed with any craniofacial deformity were excluded. Using 3-dimensional photogrammetry, surface contour analysis was performed in the cheek region to calculate the mean, maximal, and minimal difference of surface projection and global root mean square error between the preoperative and 1-year postoperative period. The change of horizontal facial widths and jawline angle was evaluated. In contour analysis, the mean difference of surface contour was highest in anterior, followed by lateral cheek and lower face, sequentially. The maximal difference of surface contour was highest in anterior cheek, followed by lateral cheek and lower face, whereas the minimal difference of surface contour was lowest in lower face, followed by anterior cheek and lateral cheek, sequentially. No significant differences in the midfacial and lower facial distances were observed between the preoperative and postoperative periods. There was significant increase of jawline angle, from 20.78 to 23.14 degree of mean value ( P =0.001). In conclusion, the extended SMAS face-lift with vertical vector can be an optimal option for Asian subjects in terms of the midfacial volumetric shift, sharpening of jawline and avoidance of midfacial widening.

Reliability and Agreement of Automated Head Measurements From 3-Dimensional Photogrammetry in Young Children.

This study aimed to assess the reliability and agreement of automated head measurements using 3-dimensional (3D) photogrammetry in young children. Specifically, the study evaluated the agreement between manual and automated occipitofrontal circumference (OFC) measurements (n = 264) obtained from 3D images of 188 patients diagnosed with sagittal synostosis using a novel automated method proposed in this study. In addition, the study aimed to determine the interrater and intrarater reliability of the automatically extracted OFC, cephalic index, and volume. The results of the study showed that the automated OFC measurements had an excellent agreement with manual measurements, with a very strong regression score ( R2 = 0.969) and a small mean difference of -0.1 cm (-0.2%). The limits of agreement ranged from -0.93 to 0.74 cm, falling within the reported limits of agreement for manual OFC measurements. High interrater and intrarater reliability of OFC, cephalic index, and volume measurements were also demonstrated. The proposed method for automated OFC measurements was found to be a reliable alternative to manual measurements, which may be particularly beneficial in young children who undergo 3D imaging in craniofacial centers as part of their treatment protocol and in research settings that require a reproducible and transparent pipeline for anthropometric measurements. The method has been incorporated into CraniumPy, an open-source tool for 3D image visualization, registration, and optimization, which is publicly available on GitHub ( https://github.com/T-AbdelAlim/CraniumPy ).

Classification of Skull Shape Deformities Related to Craniosynostosis on 3D Photogrammetry.

Implementation of the Utrecht Cranial Shape Quantificator (UCSQ) classification method on 3D photogrammetry in patients with different types of craniosynostosis is the aim of the present study. Five children (age <1 year) of every group of the common craniosynostoses (scaphocephaly, brachycephaly, trigonocephaly, right-sided and left-sided anterior plagiocephaly) were randomly included. The program 3-Matic (v13.0) was used to import and analyze the included 3dMD photos. Three external landmarks were placed. Using the landmarks, a base plane was created, as well as a plane 4 cm superior to the base plane. Using UCSQ, we created sinusoid curves of the patients, the resulting curves were analyzed and values were extracted for calculations. Results per patient were run through a diagnostic flowchart in order to determine correctness of the flowchart when using 3D photogrammetry. Each of the patients (n=25) of the different craniosynostosis subgroups is diagnosed correctly based on the different steps in the flowchart. This study proposes and implements a diagnostic approach of craniosynostosis based on 3D photogrammetry. By using a diagnostic flowchart based on specific characteristics for every type of craniosynostosis related to specific skull deformities, diagnosis can be established. All variables are expressed in number and are therefore objective.