A multi-enzyme cascade reaction for the production of 6-hydroxyhexanoic acid.

Multi-enzyme cascade reactions capture the essence of nature's efficiency by increasing the productivity of a process. Here we describe one such three-enzyme cascade for the synthesis of 6-hydroxyhexanoic acid. Whole cells of Escherichia coli co-expressing an alcohol dehydrogenase and a Baeyer-Villiger monooxygenase (CHMO) for internal cofactor regeneration were used without the supply of external NADPH or NADP+. The product inhibition caused by the ε-caprolactone formed by the CHMO was overcome by the use of lipase CAL-B for in situ conversion into 6-hydroxyhexanoic acid. A stirred tank reactor under fed-batch mode was chosen for efficient catalysis. By using this setup, a product titre of >20 g L-1 was achieved in a 500 mL scale with an isolated yield of 81% 6-hydroxyhexanoic acid.

New Hydroxydecanoic Acid Derivatives Produced by an Dndophytic Yeast Aureobasidium pullulans AJF1 from Flowers of Aconitum carmichaeli.

Endophytes have been recognized as a source for structurally novel and biologically active secondary metabolites. Among the host plants for endophytes, some medicinal plants that produce pharmaceuticals have been reported to carry endophytes, which could also produce bioactive secondary metabolites. In this study, the medicinal plant Aconitum carmichaeli was selected as a potential source for endophytes. An endophytic microorganism, Aureobasidium pullulans AJF1, harbored in the flower of Aconitum carmichaeli, was cultured on a large scale and extracted with an organic solvent. Extensive chemical investigation of the extracts resulted in isolation of three lipid type compounds (1-3), which were identified to be (3R,5R)-3,5-dihydroxydecanoic acid (1), (3R,5R)-3-(((3R,5R)-3,5-dihydroxydecanoyl)oxy)-5-hydroxydecanoic acid (2), and (3R,5R)-3-(((3R,5R)-5-(((3R,5R)-3,5-dihydroxydecanoyl)oxy)-3-hydroxydecanoyl)oxy)-5-hydroxydecanoic acid (3) by chemical methods in combination with spectral analysis. Compounds 2 and 3 had new structures. Absolute configurations of the isolated compounds (1-3) were established using modified Mosher's method together with analysis of NMR data for their acetonide derivatives. All the isolates (1-3) were evaluated for antibiotic activities against Escherichia coli, Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, and their cytotoxicities against MCF-7 cancer cells. Unfortunately, they showed low antibiotic activities and cytotoxic activities.

Chiral discrimination of α-hydroxy acids and N-Ts-α-amino acids induced by tetraaza macrocyclic chiral solvating agents by using 1H NMR spectroscopy.

In the field of chiral recognition, reported chiral discrimination by 1H NMR spectroscopy has mainly focused on various chiral analytes with a single chiral center, regarded as standard chiral substrates to evaluate the chiral discriminating abilities of a chiral auxiliary. Among them, chiral α-hydroxy acids, α-amino acids and their derivatives are chiral organic molecules involved in a wide variety of biological processes, and also play an important role in the area of preparation of pharmaceuticals, as they are part of the synthetic process in the production of chiral drug intermediates and protein-based drugs. In this paper, several α-hydroxy acids and N-Ts-α-amino acids were used to evaluate the chiral discriminating abilities of tetraaza macrocyclic chiral solvating agents (TAMCSAs) 1a-1d by 1H NMR spectroscopy. The results indicate that α-hydroxy acids and N-Ts-α-amino acids were successfully discriminated in the presence of TAMCSAs 1a-1d by 1H NMR spectroscopy in most cases. The enantiomers of the α-hydroxy acids and N-Ts-α-amino acids were assigned based on the change of integration of the 1H NMR signals of the corresponding protons. The enantiomeric excesses (ee) of N-Ts-α-amino acids 11 with different optical compositions were calculated based on the integration of the 1H NMR signals of the CH3 protons (Ts group) of the enantiomers of (R)- and (S)-11 in the presence of TAMCSA 1b. At the same time, the possible chiral discriminating behaviors have been discussed by means of the Job plots of (±)-2 with TAMCSAs 1b and proposed theoretical models of the enantiomers of 2 and 6 with TAMCSA 1a, respectively.

Synthesis and biomedical applications of functional poly(α-hydroxy acids) via ring-opening polymerization of O-carboxyanhydrides.

Poly(α-hydroxy acids) (PAHAs) are a class of biodegradable and biocompatible polymers that are widely used in numerous applications. One drawback of these conventional polymers, however, is their lack of side-chain functionalities, which makes it difficult to conjugate active moieties to PAHA or to fine-tune the physical and chemical properties of PAHA-derived materials through side-chain modifications. Thus, extensive efforts have been devoted to the development of methodology that allows facile preparation of PAHAs with controlled molecular weights and a variety of functionalities for widespread utilities. However, it is highly challenging to introduce functional groups into conventional PAHAs derived from ring-opening polymerization (ROP) of lactides and glycolides to yield functional PAHAs with favorable properties, such as tunable hydrophilicity/hydrophobicity, facile postpolymerization modification, and well-defined physicochemical properties. Amino acids are excellent resources for functional polymers because of their low cost, availability, and structural as well as stereochemical diversity. Nevertheless, the synthesis of functional PAHAs using amino acids as building blocks has been rarely reported because of the difficulty of preparing large-scale monomers and poor yields during the synthesis. The synthesis of functionalized PAHAs from O-carboxyanhydrides (OCAs), a class of five-membered cyclic anhydrides derived from amino acids, has proven to be one of the most promising strategies and has thus attracted tremendous interest recently. In this Account, we highlight the recent progress in our group on the synthesis of functional PAHAs via ROP of OCAs and their self-assembly and biomedical applications. New synthetic methodologies that allow the facile preparation of PAHAs with controlled molecular weights and various functionalities through ROP of OCAs are reviewed and evaluated. The in vivo stability, side-chain functionalities, and/or trigger responsiveness of several functional PAHAs are evaluated. Their biomedical applications in drug and gene delivery are also discussed. The ready availability of starting materials from renewable resources and the facile postmodification strategies such as azide-alkyne cycloaddition and the thiol-yne "click" reaction have enabled the production of a multitude of PAHAs with controlled molecular weights, narrow polydispersity, high terminal group fidelities, and structural diversities that are amenable for self-assembly and bioapplications. We anticipate that this new generation of PAHAs and their self-assembled nanosystems as biomaterials will open up exciting new opportunities and have widespread utilities for biological applications.

Synthesis of a library of propargylated and PEGylated α-hydroxy acids toward "clickable" polylactides via hydrolysis of cyanohydrin derivatives.

A new simple and practical protocol for scalable synthesis of a novel library of propargylated and PEGylated α-hydroxy acids toward the preparation of "clickable" polylactides was described. The overall synthesis starting from readily available propargyl alcohol, bromoacetaldehyde diethyl acetal, and OEGs or PEGs was developed as a convenient procedure with low cost and no need of column chromatographic purification. The terminal alkyne functionality survives from hydrolysis of the corresponding easily accessible cyanohydrin derivatives in methanolic sulfuric acid. Facile desymmetrization, monofunctionalization, and efficient chain-elongation coupling of OEGs further enable the incorporation of OEGs to α-hydroxy acids in a simple and efficient manner. At the end, synthesis of allyloxy lactic acid indicates that an alkene group is also compatible with the developed method.

A chemoselective oxidation of monosubstituted ethylene glycol: facile synthesis of optically active α-hydroxy acids.

A mild and efficient method for the synthesis of optically active α-hydroxy acids through chemoselective oxidation of monosubstituted ethylene glycols using the TEMPO-NaOCl reagent system is described. It is evident from our studies that the solvent, pH and reaction temperature are very crucial for the success of this oxidation. The versatility of this method has been demonstrated with a variety of aliphatic, aromatic and carbohydrate substrates bearing various functional groups.

[Features phase transfer catalytic glycosylation of aromatic hydroxy acids].

The catalytic phase transfer reactions of per acetylated alpha-D-glucosaminyl chloride with isomeric hydroxybenzoic, 1-hydroxy-2-naphthoic acids in solid potassium carbonate--acetonitrile were studied. It was found that the composition and yields of reaction products are determined by the nature of the source ofcarboxylic acids, lipophilic phase transfer catalyst, temperature. For the first time found that the O-beta-glycosyl esters of ortho-hydroxyaromatic acids in the presence of potassium carbonate can anomerizovatsya in 1,2-cis derivatives. The structure of the synthesized compounds proved 1H NMR spectroscopy. In in vivo experiments it was established that glycosyl esters of salicylic acid and per acetylated 2-carboxy phenylglucosaminide exhibit analgesic activity similar to aspirin.

Selective reductions of cyclic 1,3-diesters by using SmI(2) and H(2)O.

SmI(2)/H(2)O reduces cyclic 1,3-diesters to 3-hydroxyacids with no over reduction. Furthermore, the reagent system is selective for cyclic 1,3-diesters over acyclic 1,3-diesters, and esters. Radicals formed by one-electron reduction of the ester carbonyl group have been exploited in intramolecular additions to alkenes. The ketal unit and the reaction temperature have a marked impact on the diastereoselectivity of the cyclizations. Cyclization cascades are possible when two alkenes are present in the starting cyclic diester and lead to the formation of two rings and four stereocenters with excellent stereocontrol.

Highly efficient macrolactonization of ω-hydroxy acids using benzotriazole esters: synthesis of Sansalvamide A.

A facile and mild macrolactonization reaction of ω-hydroxy acids was developed based on the transesterification of benzotriazole esters. Treatment of ω-hydroxy acids with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and 1-hydroxy benzotriazole (HOBT) in chloroform provided macrolactones in excellent yields. The reactions were performed under basic, neutral and acidic conditions using N,N-dimethylaminopyridine (DMAP), tetrabutylammonium tetrafluoroborate (TBABF(4)) and BF(3)·Et(2)O, respectively. A calcined hydrotalcite was also used instead of DMAP. Finally, to test the scope of the protocol in the synthesis of biologically relevant macrolactones, the total synthesis of Sansalvamide A was carried out.

Selective reductions of cyclic 1,3-diesters using SmI(2) and H(2)O.

SmI(2)-H(2)O reduces cyclic 1,3-diesters to 3-hydroxyacids with no over-reduction. Furthermore, the reagent system is selective for cyclic 1,3-diesters over acyclic 1,3-diesters and esters. Experimental and computational studies suggest that the origin of the selectivity lies in the initial electron transfer to the ester carbonyl and the anomeric stabilization of the resulting radical-anion intermediate. Radicals formed by one-electron reduction of the ester carbonyl group have been exploited in intramolecular additions to alkenes.

Aryl nucleoside H-phosphonates. Part 16: synthesis and anti-HIV-1 activity of di-aryl nucleoside phosphotriesters.

Di-aryl nucleoside phosphotriesters have been explored as a new type of pronucleotides for the purpose of anti-HIV-1 therapy and efficient synthetic protocols, based on H-phosphonate chemistry, have been developed for the preparation of this class of compounds. It was found that anti-HIV-1 activity of the phosphotriesters bearing an antiviral nucleoside moiety (AZT, ddA) and also ddU was due, at least partially, to intracellular conversion into the corresponding nucleoside 5'-monophosphates, and their efficiency correlated well with the pK(a) values of the aryloxy groups present.

Design and synthesis of hydroxy-alkynoic acids and their methyl esters as novel activators of BK channels.

Physiological and pharmacological agents that activate large conductance, voltage-, and calcium-gated potassium (BK) channels located in the smooth muscle are effective vasodilators. Thus, activators of smooth muscle BK channels may be potential therapeutic tools to treat cardiovascular disease associated with vasoconstriction and/or impaired dilation, such as cerebrovascular spasm and constriction. We previously showed that lithocholic acid (LC) and other cholane derivatives activated smooth muscle BK channels and, thus, caused endothelium-independent cerebral artery dilation. However, clinical use of these cholane derivatives could be limited by the actions of these steroids, such as elevation of intracellular calcium and induction of apoptosis. Using LC as template, we designed and synthesized a series of hydroxy-alkynoic acids and corresponding methyl esters, as putative, non-steroid BK channel activators. Indeed, the newly synthesized compounds effectively and reversibly activated rat cerebrovascular myocyte BK channel at concentrations similar to those found effective with LC. Among all the novel compounds tested, C-10 hydroxy-alkynoic acid methyl ester appears to be the most effective activator of vascular myocyte BK channels.

Biomimetic polyurethane/TiO2 nanocomposite scaffolds capable of promoting biomineralization and mesenchymal stem cell proliferation.

Scaffolds with extracellular matrix-like fibrous morphology, suitable mechanical properties, biomineralization capability, and excellent cytocompatibility are desired for bone regeneration. In this work, fibrous and degradable poly(ester urethane)urea (PEUU) scaffolds reinforced with titanium dioxide nanoparticles (nTiO2) were fabricated to possess these properties. To increase the interfacial interaction between PEUU and nTiO2, poly(ester urethane) (PEU) was grafted onto the nTiO2. The scaffolds were fabricated by electrospinning and exhibited fiber diameter of <1µm. SEM and EDX mapping results demonstrated that the PEU modified nTiO2 was homogeneously distributed in the fibers. In contrast, severe agglomeration was found in the scaffolds with unmodified nTiO2. PEU modified nTiO2 significantly increased Young's modulus and tensile stress of the PEUU scaffolds while unmodified nTiO2 significantly decreased Young's modulus and tensile stress. The greatest reinforcement effect was observed for the scaffold with 1:1 ratio of PEUU and PEU modified nTiO2. When incubating in the simulated body fluid over an 8-week period, biomineralization was occurred on the fibers. The scaffolds with PEU modified nTiO2 showed the highest Ca and P deposition than pure PEUU scaffold and PEUU scaffold with unmodified nTiO2. To examine scaffold cytocompatibility, bone marrow-derived mesenchymal stem cells were cultured on the scaffold. The PEUU scaffold with PEU modified nTiO2 demonstrated significantly higher cell proliferation compared to pure PEUU scaffold and PEUU scaffold with unmodified nTiO2. The above results demonstrate that the developed fibrous nanocomposite scaffolds have potential for bone tissue regeneration.

Synthesis of tertiary alpha-hydroxy acids by silylene transfer to alpha-keto esters.

Alpha-keto esters can be converted into alpha-hydroxy acids in a single flask involving metal-catalyzed silylene transfer, 6pi-electrocyclization, Ireland-Claisen rearrangement, and hydrolysis. This reaction sequence is stereoselective and tolerates alkyl- and aryl-substituted alpha-keto ester substrates as well as an alpha-imino ester.

Stereocontrolled synthesis of 2,4-diamino-3-hydroxyacids starting from diketopiperazines: a new route for the preparation of statine analogues.

Chiral 3-aminopyrrolidine-2,4-diones, obtained by transannular rearrangement of activated diketopiperazines, could be a springboard toward an exceptional stereoselective synthesis of original 2-disubstituted statines. After a selective reduction of the pyrrolidine-2,4-diones, the access to opened 2,4-diamino-3-hydroxyacid esters was carried out by a subsequent alkaline treatment or directly through a tandem reduction-solvolysis.

Synthesis, X-ray structure and antimycobacterial activity of silver complexes with alpha-hydroxycarboxylic acids.

In this paper, synthesis, characterization and antimycobacterial properties of a new water-soluble complex identified as silver-mandelate are described. Elemental and thermal analyses are consistent with the formula [Ag(C(6)H(5)C(OH)COO)](n). The polymeric structure was determined by single X-ray diffraction and the two-dimensional structure is based on the bis(carboxylate-O,O') dimer [Ag-O, 2.237(3), 2.222(3) Angstrom]. The structure is extended along both the b and c axes through two oxygen atoms of a bidentate alpha-hydroxyl-carboxylate residue [Ag-OH(hydroxyl), 2.477(3) Angstrom; Ag-O(carboxylate), 2.502(3) Angstrom; O-Ag-O, 63.94(9) degrees]. A strong d(10)-d(10) interaction was observed between two silver atoms. The Ag - Ag distance is 2.8307(15) Angstrom. The NMR (13)C spectrum in D(2)O shows that coordination of the ligand to Ag(I) occurs through the carboxylate group in solution. Potentiometric titration shows that only species with a molar metal:ligand ratio of 2:2 are formed in aqueous solution. The mandelate complex and the silver-glycolate, silver-malate and silver-hydrogen-tartarate complexes were tested against three types of mycobacteria, Mycobacterium avium, Mycobacterium tuberculosis and Mycobacterium kansasii, and their minimal inhibitory concentration (MIC) values were determined. The results show that the four complexes are potential candidates for antiseptic or disinfectant drugs for discharged secretions of patients affected with tuberculosis.

Controlled Photoredox Ring-Opening Polymerization of O-Carboxyanhydrides Mediated by Ni/Zn Complexes.

Here, we describe an effective protocol that combines photoredox Ni/Ir catalysis with the use of a Zn-alkoxide for efficient ring-opening polymerization, allowing for the synthesis of isotactic poly(α-hydroxy acids) with expected molecular weights (>140 kDa) and narrow molecular weight distributions (Mw/Mn < 1.1). This ring-opening polymerization is mediated by Ni and Zn complexes in the presence of an alcohol initiator and a photoredox Ir catalyst, irradiated by a blue LED (400 - 500 nm). The polymerization is performed at a low temperature (-15 °C) to avoid undesired side reactions. The complete monomer consumption can be achieved within 4 - 8 hours, providing a polymer close to the expected molecular weight with narrow molecular weight distribution. The resulted number-average molecular weight shows a linear correlation with the degree of polymerization up to 1000. The homodecoupling 1H NMR study confirms that the obtained polymer is isotactic without epimerization. This polymerization reported herein offers a strategy for achieving rapid, controlled O-carboxyanhydrides polymerization to prepare stereoregular poly(α-hydroxy acids) and its copolymers bearing various functional side-chain groups.

Study on the conversion of three natural statins from lactone forms to their corresponding hydroxy acid forms and their determination in Pu-Erh tea.

Conversions of statins, 3-hydroxy-3-methylglutaryl coenzyme A (HMG-CoA) reductase inhibitors, from lactone forms to their corresponding hydroxy acid form in 0.1 N NaOH or 0.05 N KOH (prepared with 25, 50, 75, 90% acetonitrile or methanol in water or 100% water) were evaluated. Results showed that lactone form statins could be transformed almost completely only in alkaline solutions prepared with 25 or 50% acetonitrile. In all methanolic alkaline solutions, lactone form statins could also be converted entirely, nevertheless, they would be further transformed to the methyl ester of the hydroxy acid form and the transformation increased as methanol rises. When lactone and hydroxy acid forms of statins were in methanol, ethyl acetate, 70% acetonitrile in water (with 0.5% acetic acid or no) for 0-48 h at room temperature or in 100 degrees C water for 0-2 h, lactone form statins were converted to their corresponding hydroxy acids, which were raised as time extends and the highest conversions of them were about 35% in 100 degrees C water and 70% acetonitrile, slightly transformed for lactone form statins in 70% acetonitrile (with 0.5% acetic acid) after 8 h, and the other treatments for all statins showed no significant changes. Interferences would be reduced efficiently when statins were extracted from Pu-Erh tea with methanol, ethyl acetate or 100 degrees C water followed by purifying through a C18 solid-phase extraction cartridge. Lovastatin was the only statin found in Pu-Erh tea and the highest content of it was found under ethyl acetate extraction. In ethyl acetate and methanol extracts, lovastatin existed merely as lactone form. The lowest content of lovastatin was found in the 100 degrees C water extract of Pu-Erh tea, however, both of lactone and hydroxy acid forms were found to exist in the extract.

Stereoselectivity and stereospecificity of the alpha,beta-dihydroxyacid dehydratase from Salmonella typhimurium.

1. In addition to the known 2R,3R- and 2R, 3S-2,3-dihydroxy-3-methylpentanoic acids (DHI), the 1S,3S- and sS,DR-isomers were prepared. 2S-2,3-Dihydroxy-3-methylbutanoic acid (DHV) was also prepared in addition to the known 2R-isomer. 2. The six dihydroxy acids were examined for their ability to promote the growth of isoleucine-valine (ilv)-requiring strains of Salmonella typhimurium and to serve as substrates for the alpha,beta-dihydroxyacid dehydratase of the same organism. 3. Only 2R,3R-2,3-dihydroxy-3-methylpentanoic and 2R-2,3-dihydroxy-3-methylbutanoic acids supported growth of the ilv strains of S. typhimurium. 4. alpha,beta-Dihydroxyacid dehydratase utilized the three isomers with the 2R-configuration as substrates but not those with the 2S-configuration. 5. In an additional growth study that utilized the 3R- and 3S-isomers of 3-methyl-2-oxopentanoic acid, the alpha-keto acid analogue of isoleucine, only the 3S-isomer supported growth. 6. It is concluded that the mechanism of action of the dehydratase is stereospecific in that the proton that is attached to C-3 of the substrate occupies the same steriochemical position as the departing hydroxyl group (Fig. 6).

Direct Catalytic Asymmetric Synthesis of ß-Hydroxy Acids from Malonic Acid.

A nickel(II) catalyzed asymmetric synthesis of ß-hydroxy acids from malonic acid and ketones was developed, revealing for the first time the synthetic utility of malonic acid in the construction of chiral carboxyl acids; importantly, the synthetic potential of this strategy was further demonstrated by the rapid construction of cephalanthrin A, phaitanthrin B, cruciferane, and rice metabolites.