Comparison of direct analysis in real-time mass spectrometry, atmospheric solids analysis probe-mass spectrometry, and ion mobility spectrometry for ensuring food safety by rapid screening of poppy seeds.

The opium poppy (Papaver somniferum) is a global commercial crop that has been historically valued for both medicinal and culinary purposes. Naturally occurring opium alkaloids including morphine, codeine, thebaine, noscapine, and papaverine are found primarily in the latex produced by the plant. If the plant is allowed to fully mature, poppy seeds that do not contain the opium alkaloids will form within the pods and may be used in the food industry. It is possible for the seeds to become contaminated with alkaloids by the latex during harvesting, posing a potential health risk for consumers. In the USA, there have been more than 600 reported adverse events including 19 fatalities that may be linked to the consumption of a contaminated poppy-containing product such as home-brewed poppy seed tea. Unwashed poppy seeds and pods may be purchased over the Internet and shipped worldwide. The Forensic Chemistry Center, US Food and Drug Administration (FDA) has evaluated several mass spectrometers (MS) capable of rapid screening to be used for high-throughput analysis of samples such as poppy seeds. These include a direct analysis in real-time (DART) ambient ionization source coupled to a single-quadrupole MS, an atmospheric solids analysis probe (ASAP) ionization source coupled to the same MS, and ion mobility spectrometers (IMS). These instruments have been used to analyze 17 poppy seed samples for the presence of alkaloids, and the results were compared to data obtained using liquid chromatography with mass spectral detection (LC-MS/MS). Results from the 17 poppy seed samples indicate that the DART-MS, ASAP-MS, and IMS devices detect many of the same alkaloids confirmed during the LC-MS/MS analyses, although both the false-positive and false-negative rates are higher, possibly due to the non-homogeneity of the samples and the lack of chromatographic separation.

Genome-wide identification and characterization of major latex-like protein genes responsible for crop contamination in Cucurbita pepo.

BACKGROUND: Zucchini plants (Cucurbita pepo) accumulate persistent organic pollutants (POPs) at high concentrations in their aerial parts, and major latex-like proteins (MLPs) play crucial roles in their accumulation. MLPs bind to POPs in root cells, MLP-POP complexes are then translocated into xylem vessels, and POPs are transported to the aerial parts. We previously identified three CpMLP genes (MLP-PG1, MLP-GR1, and MLP-GR3) as transporting factors for POPs; however, other studies have shown that the genomes of several plant species contain more than 10 MLP genes, thus, further MLP genes responsible for POP accumulation may have been overlooked. METHODS AND RESULTS: Here, we investigated the number of CpMLP genes by performing a hidden Markov model search against the C. pepo genome database and characterized their effects on POP accumulation by performing the expression analysis in the organs and in silico structural analysis. The C. pepo genome contained 21 CpMLP genes, and several CpMLP genes, including MLP-PG1 and MLP-GR3, were highly expressed in roots. 3D structural prediction showed that all examined CpMLPs contained a cavity with a hydrophobic region, which facilitated binding to POPs. CONCLUSIONS: The present study provides insights regarding CpMLP genes responsible for POP accumulation.

Novel Insights into the Organization of Laticifer Cells: A Cell Comprising a Unified Whole System.

Laticifer cells are specialized plant cells that synthesize and accumulate latex. Studies on laticifers have lagged behind in recent years, and data regarding the functional role of laticifers and their fitness benefit still remain elusive. Laticifer differentiation and its impact on plant growth and development also remain to be investigated. Here, cellular, molecular, and genetic tools were developed to examine the distribution, differentiation, ontogeny, and other characteristic features, as well as the potential developmental role of laticifer cells in the latex-bearing plant Euphorbia lathyris. The organization of the laticiferous system within the E. lathyris plant body is reported, emerging as a single elongated and branched coenocytic cell, constituting the largest cell type existing in plants. We also report the ontogeny and organization of laticifer cells in the embryo and the identification of a laticifer-associated gene expression pattern. Moreover, the identification of laticifer- and latex-deficient mutants (pil mutants) allowed for the identification of distinct loci regulating laticifer differentiation, growth, and metabolic activity. Additionally, pil mutants revealed that laticifer cells appear nonessential for plant growth and development, thus pointing toward their importance, instead, for specific ecophysiological adaptations of latex-bearing plants in natural environments.

The influence of aggregation of latex particles on membrane fouling attachments & ultrafiltration performance in ultrafiltration of latex contaminated water and wastewater.

The goal of the present study was to investigate the influence of latex particle aggregation on membrane fouling attachments and the ultrafiltration performance of simulated latex effluent using Cetyltrimethyl Ammonium Bromide (CTAB) as a cationic surfactant. Hydrophilic polysulfone and ultrafilic flat heterogeneous membranes, with molecular weight cut off (MWCO) of 60,000 and 100,000, respectively, as well as hydrophobic polyvinylidene difluoride with MWCO of 100,000, were used under a constant flow rate and cross-flow mode in ultrafiltration of latex solution. In addition, a polycarbonate flat membrane with uniform pore size of 0.05µm was likewise used during the experiment. The effects of CTAB on the latex particle size distribution were investigated at various concentrations, different treatment times, and diverse agitation duration times. The effects of CTAB on the zeta potential of membrane surfaces and latex particles were also investigated. The data obtained indicate that the particle size distribution of treated latex effluent experienced significant shifts in the peaks toward a larger size range caused by the aggregation of particles. As a result, the mass of fouling contributing to pore blocking and the irreversible fouling were noticeably reduced. The optimum results occurred in the instance when CTAB was added at the critical micelle concentration of 0.36g/L, for the duration of 10min and with minimal agitation. Notably, a higher stirring rate had an overall negative effect on the membrane fouling minimization.

Physical Characteristics of the Leaves and Latex of Papaya Plants Infected with the Papaya meleira Virus.

Sticky disease, which is caused by Papaya meleira virus (PMeV), is a significant papaya disease in Brazil and Mexico, where it has caused severe economic losses, and it seems to have spread to Central and South America. Studies assessing the pathogen-host interaction at the nano-histological level are needed to better understand the mechanisms that underlie natural resistance. In this study, the topography and mechanical properties of the leaf midribs and latex of healthy and PMeV-infected papaya plants were observed by atomic force microscopy and scanning electron microscopy. Healthy plants displayed a smooth surface with practically no roughness of the leaf midribs and the latex and a higher adhesion force than infected plants. PMeV promotes changes in the leaf midribs and latex, making them more fragile and susceptible to breakage. These changes, which are associated with increased water uptake and internal pressure in laticifers, causes cell disruption that leads to spontaneous exudation of the latex and facilitates the spread of PMeV to other laticifers. These results provide new insights into the papaya-PMeV interaction that could be helpful for controlling papaya sticky disease.

Sonographically guided sternoclavicular joint injection: description of technique and validation.

OBJECTIVES: The primary purpose of this investigation was to describe and validate a sonographically guided technique for injecting the sternoclavicular joint (SCJ) using a cadaveric model. METHODS: A single experienced operator (J.S.) completed 13 sonographically guided SCJ injections on 7 unembalmed cadaveric specimens (4 male and 3 female) using an out-of-plane, caudad-to-cephalad technique to place 1 mL of diluted blue latex into the joint. Within 72 hours, study coinvestigators dissected each specimen to determine the injectate location. RESULTS: All 13 injections accurately placed latex into the SCJ with a predilection for the clavicular side (accuracy, 100%; 95% confidence interval, 73%-100%). Three injections (23%) placed all latex on the clavicular side of the SCJ in the presence of a complete intra-articular disk. Dissection revealed incomplete degenerated disks in the remaining 10 joints. Seven of these injections (54%) clearly placed more than 80% of the latex on the clavicular side, whereas the remaining 3 injections (23%) showed nearly equal latex distribution between the clavicular and sternal sides. No injection resulted in neurovascular injury or extracapsular flow. CONCLUSIONS: Sonographically guided SCJ injections can be considered in the diagnosis and management of patients presenting with medial shoulder pain syndromes and, using the technique described herein, have a predilection to target the clavicular portion of the joint. In younger patients with possible complete intra-articular disks or in patients with sternal-side conditions, practitioners should consider confirming sternal-side flow after injection or attempt to specifically target the sternal side of the joint.

Characterization of the thickness and distribution of latex coatings on polyvinylidene chloride beads by backscattered electron imaging.

Polyvinylidene chloride (PVDC) co-polymer resins are commonly formulated with a variety of solid additives for the purpose of processing or stabilization. A homogeneous distribution of these additives during handling and processing is important. The Dow Chemical Company developed a process to incorporate solid materials in latex form onto PVDC resin bead surfaces using a coagulation process. In this context, we present a method to characterize the distribution and thickness of these latex coatings. The difference in backscattered electron signal from the higher mean atomic number PVDC core and lower atomic number latex coating in conjunction with scanning electron microscopy (SEM) imaging using a range of accelerating voltages was used to characterize latex thickness and distribution across large numbers of beads quickly and easily. Monte Carlo simulations were used to quantitatively estimate latex thickness as a function of brightness in backscatter electron images. This thickness calibration was validated by cross-sectioning using a focused ion-beam SEM. Thicknesses from 100 nm up to about 1.3 µm can be determined using this method.

Defining trimester-specific reference intervals for carbohydrate deficient transferrin in pregnant women.

OBJECTIVES: Extensive consumption of alcohol during pregnancy can lead to severe complications for the unborn child. Carbohydrate-deficient transferrin (CDT) levels in serum have become a common biomarker for excessive alcohol intake. However, during pregnancy CDT levels can rise to levels above commonly used cut-off values, for reasons unrelated to alcohol intake. The aim of this study is to investigate the changes in CDT values during pregnancy and to determine accurate, trimester dependent reference intervals. METHODS: 439 serum samples of 147 healthy pregnant women were obtained for trimester 1, 2, 3, and post-partum and were analysed by high-performance liquid chromatography (HPLC) and an N-Latex immunonephelometric assay. New trimester-specific reference intervals were established. RESULTS: This study demonstrates there is a trimester-dependent increase of %CDT, as up to 39.4% of the population exceeded the previously established upper reference limit of 1.7%. In our study the estimated upper reference limit for %DST/%CDT were 1.55%, 1.96%, 2.05% and 1.35% for trimester 1, 2, 3 and post-partum for the HPLC-method and 2.02%, 2.19%, 2.19% and 1.96% for the N-Latex immunoassay. CONCLUSIONS: We demonstrate that CDT levels rise during pregnancy. The magnitude of the increase is method-dependent and needs to be taken into account. We have established method- and trimester-specific reference intervals to prevent false-positive results in alcohol abuse screening tests during pregnancy.

Biochemical characterization of Euphorbia resinifera floral cyathia.

Euphorbia resinifera O. Berg is a plant endemic to the Northern and Central regions of Morocco known since the ancient Roman and Greek times for secreting a poisonous latex containing resiniferatoxin. However, E. resinifera pseudo-inflorescences called cyathia are devoid of laticifers and, therefore, do not secrete latex. Instead, they exudate nectar that local honey bees collect and craft into honey. Honey and cyathium water extracts find a broad range of applications in the traditional medicine of Northern Africa as ointments and water decoctions. Moreover, E. resinifera monofloral honey has received the Protected Geographic Indication certification for its outstanding qualities. Given the relevance of E. resinifera cyathia for bee nutrition, honey production, and the health benefit of cyathium-derived products, this study aimed to screen metabolites synthesized and accumulated in its pseudo-inflorescences. Our analyses revealed that E. resinifera cyathia accumulate primary metabolites in considerable abundance, including hexoses, amino acids and vitamins that honey bees may collect from nectar and craft into honey. Cyathia also synthesize volatile organic compounds of the class of benzenoids and terpenes, which are emitted by flowers pollinated by honey bees and bumblebees. Many specialized metabolites, including carotenoids, flavonoids, and polyamines, were also detected, which, while protecting the reproductive organs against abiotic stresses, also confer antioxidant properties to water decoctions. In conclusion, our analyses revealed that E. resinifera cyathia are a great source of antioxidant molecules and a good food source for the local foraging honeybees, revealing the central role of the flowers from this species in mediating interactions with local pollinators and the conferral of medicinal properties to plant extracts.

Evaluation and comparison of commercially available latex extracts for skin prick tests.

BACKGROUND: Crude latex extracts are commonly used in skin prick tests (SPT) for the diagnosis of natural rubber latex (NRL) allergy. Nevertheless, variations in protein and allergen composition between latex extracts from different manufacturers can hamper a correct diagnosis. OBJECTIVES: To analyze the heterogeneity of proteins and allergens in latex extracts from 7 different manufacturers and to assess its relevance in the diagnosis of latex allergy. METHODS: Seven latex SPT extracts were analyzed for protein content using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The 4 major allergens Hev b 1, Hev b 3, Hev b 5, and Hev b 6.02 were also quantified using enzyme immunoassay. All commercial extracts were tested for their in vitro allergenic capacity using microarray inhibition assays and for their ability to induce biological reactivity in latex-allergic patients undergoing SPT. RESULTS: The protein content of the extracts varied widely from 8.0 microg/mL to 526.5 microg/mL. SDS-PAGE revealed broad differences in protein profiles between the extracts. Marked variability in the contents of all 4 major allergens was observed, and Hev b 3 and Hev b 5 were undetectable in some extracts. Microarray inhibition assays and SPT demonstrated relevant differences in allergenic capacity between the extracts. CONCLUSIONS: The marked heterogeneity in protein and allergen content of latex extracts from different manufacturers could explain the broad spectrum of SPT results recorded. Our findings suggest that the extracts used for the diagnosis of latex allergy should be improved and standardized.

Plant defense synergies and antagonisms affect performance of specialist herbivores of common milkweed.

As a general rule, plants defend against herbivores with multiple traits. The defense synergy hypothesis posits that some traits are more effective when co-expressed with others compared to their independent efficacy. However, this hypothesis has rarely been tested outside of phytochemical mixtures, and seldom under field conditions. We tested for synergies between multiple defense traits of common milkweed (Asclepias syriaca) by assaying the performance of two specialist chewing herbivores on plants in natural populations. We employed regression and a novel application of random forests to identify synergies and antagonisms between defense traits. We found the first direct empirical evidence for two previously hypothesized defense synergies in milkweed (latex by secondary metabolites, latex by trichomes) and identified numerous other potential synergies and antagonisms. Our strongest evidence for a defense synergy was between leaf mass per area and low nitrogen content; given that these "leaf economic" traits typically covary in milkweed, a defense synergy could reinforce their co-expression. We report that each of the plant defense traits showed context-dependent effects on herbivores, and increased trait expression could well be beneficial to herbivores for some ranges of observed expression. The novel methods and findings presented here complement more mechanistic approaches to the study of plant defense diversity and provide some of the best evidence to date that multiple classes of plant defense synergize in their impact on insects. Plant defense synergies against highly specialized herbivores, as shown here, are consistent with ongoing reciprocal evolution between these antagonists.

Metabolic routes affecting rubber biosynthesis in Hevea brasiliensis latex.

The cytosolic mevalonate (MVA) pathway in Hevea brasiliensis latex is the conventionally accepted pathway which provides isopentenyl diphosphate (IPP) for cis-polyisoprene (rubber) biosynthesis. However, the plastidic 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway may be an alternative source of IPP since its more recent discovery in plants. Quantitative RT-PCR (qRT-PCR) expression profiles of genes from both pathways in latex showed that subcellular compartmentalization of IPP for cis-polyisoprene synthesis is related to the degree of plastidic carotenoid synthesis. From this, the occurrence of two schemes of IPP partitioning and utilization within one species is proposed whereby the supply of IPP for cis-polyisoprene from the MEP pathway is related to carotenoid production in latex. Subsequently, a set of latex unique gene transcripts was sequenced and assembled and they were then mapped to IPP-requiring pathways. Up to eight such pathways, including cis-polyisoprene biosynthesis, were identified. Our findings on pre- and post-IPP metabolic routes form an important aspect of a pathway knowledge-driven approach to enhancing cis-polyisoprene biosynthesis in transgenic rubber trees.

Transport of a solvent mixture across two glove materials when applied in a paint matrix.

The transport of mixed paint solvents through natural rubber latex (4 mil) and nitrile rubber (5 mil) gloves was evaluated after spray application of the paint formulation directly on the glove surface. Glove materials and thicknesses were those selected by the majority of spray painters in the local automobile repair industry. A flat panel containing glove specimens mounted in multiple permeation cells permitted evaporation of solvents from the applied paint and incorporated a solid sorbent receiving medium for measuring glove membrane transport. The panel was sprayed in a paint booth to simulate use conditions. Charcoal cloth under the glove adsorbed transported solvents, which were quantified by gas chromatography. For each solvent component, results were expressed as mass transported through the glove relative to the mass applied, per unit area, during 30 min after spray application. The paint formulation contained ketones, acetates, and aromatics. Natural rubber latex allowed 6-10 times the transport of solvents relative to nitrile rubber for all eight solvent components: methyl ethyl ketone, toluene, styrene, ethyl benzene, xylene isomers, and 2-heptanone. m-Xylene showed the largest difference in transport between the two glove materials. This solvent also had the highest transport for each material. The results indicate that nitrile rubber gloves offer somewhat greater chemical resistance to all eight solvents studied compared with natural rubber latex gloves, regardless of the chemical properties of the individual solvent components. However, it must be emphasized that neither of the glove materials, in the thicknesses used in this study, provide adequate protection when exposed by direct spray painting. Simulation of realistic spray conditions may offer a source of useful information on the performance of chemical protective gloves because it accounts for solvent evaporation and the effect of paint polymerization after application on glove transport.

Quantification of 5'-deoxy-5'-methylthioadenosine in heat-treated natural rubber latex serum.

INTRODUCTION: 5'-Deoxy-5'-methylthioadenosine (MTA) is one of the biologically active components found in natural rubber latex (NRL) serum, a common waste product from rubber plantations. In this study the contents of MTA in heat-treated NRL serum were measured in order to assess the potential of the serum as an alternative source of MTA. OBJECTIVE: To devise an HPLC/UV-based quantitative analytical protocol for the determination of MTA, and to determine the effect of heat treatment on the content of MTA in NRL serum from various sources. METHODOLOGY: An HPLC/UV-based determination of MTA using an acidic eluant was devised and validated. In the heat treatment, the effect of refluxing times on MTA liberation was evaluated. RESULTS: The quantification protocol was validated with satisfying linearity, limits of detection and quantitation, precisions for peak areas and recovery percentages from intra- and inter-day operations. The amounts of MTA in the NRL sera from various sources increased with heat treatment to yield 5-12 µg MTA/mL of serum. CONCLUSION: The devised protocol was found to be satisfyingly applicable to the routine determination of MTA in NRL serum. The effect of heat treatment on the content of MTA also indicated another possible use for NRL serum, normally discarded in vast amounts by the rubber industry, as an alternative source of MTA.

Development of a highly sensitive latex reagent directed against C-reactive protein (CRP) using epitope analysis with monoclonal antibodies.

C-Reactive protein (CRP) is an acute-phase protein that increases during systemic inflammation and is currently one of the most frequently studied inflammatory markers in epidemiology. We have determined CRP concentration using novel latex reagent with polyclonal antibody. In the present study, we determined the concentration of CRP using monoclonal antibodies, and evaluated the interaction of antigen-antibody reactive sites and latex agglutination to detect low CRP concentrations. We developed four novel monoclonal antibodies that we classified into two major groups, and that were used to prepare the latex reagents. The latex reagents prepared using a cocktail of monoclonal antibodies for different epitopes appeared highly sensitive. The lower limit of CRP detection, which was defined using the mean 3 SD method, was calculated to be 5 ng/ml for the latex reagents when oligoclonal antibodies were utilized. Furthermore, the latex reagents were found to react specifically with CRP in clinical samples.

High-throughput and highly sensitive analysis method for polyisoprene in plants by pyrolysis-gas chromatography/mass spectrometry.

Natural polyisoprene is a biopolymer consisting of isoprene units (C(5)H(8)) that is used commercially in household, medical, and industrial materials. For the management of natural polyisoprene production, the selection of high-yield polyisoprene-producing trees, and an understanding of polyisoprene biosynthesis, a high-throughput and highly sensitive screening method for the quantification of polyisoprene is required. In this study, we examined pyrolysates from polyisoprenes, polyprenols, carotenoids, ubiquinone (CoQ-10), and sterols by pyrolysis gas chromatography/mass spectrometry (PyGC/MS) and determined that the amounts of isoprene and limonene released from polyprenols and polyisoprenes were dependent upon their molecular weights. Based on these results, we developed a relative quantification method for polyisoprene in leaves by direct analysis of 1 mg of leaves using PyGC/MS. This novel quantification method eliminated extraction steps and can be used in the measurement of polyisoprene contents in Eucommia ulmoides and Hevea brasiliensis.

Proteolytic activity in latex of the genus Euphorbia--a chemotaxonomic marker?

Eighteen species of the genus Euphorbia are known to have proteolytic enzymes in their latices, 9 of them are characterized by the type of endopeptidases (Cysteine-, Serine-, Metallo- or Aspartatic-endopeptidase) which are responsible for the activity, and all nine are serine endopeptidases. In our study we examined the latices of 64 different species of the genus Euphorbia concerning proteolytic activity and serine protease activity, five of them are mentioned in the literature to be proteolytic active and four are known to contain at least one serine endopeptidase. All tested samples were able to degrade labelled casein, the activity of six latices were completely inhibited by specific serine protease inhibitors, 15 samples were not influenced, and in 43 latices a remaining activity was measured, indicating that other types of endopeptidases seem to be involved.

Analysis of nitrosamines migration from condoms in the chinese market using a proper migration experiment.

In 2008, a total of 37 condoms was sampled from the Chinese market. Released nitrosamines and nitrosatable substances from the samples were monitored according to EN12868 method. Furthermore, to simulate the process of nitrosamines migration from condoms, a new and proper migration experiment was proposed in this study. N-nitrosodimethylamine, N-nitrosodiethylamine and N-nitrodibutylamine were found in almost all samples. The release levels of nitrosamines varied from 15.62 to 792.89 microg/kg. The proposed method is feasible, sensitive and accurate.

Studies on the permeability of lymphatic capillaries.

The passageway for interstitial fluids and large molecules across the connective tissue lymph interface has been investigated in dermal lymphatic capillaries in the ears of guinea pigs. Numerous endothelial cells overlap extensively at their margins and lack adhesion devices at many points. The observations suggest that these sites are free to move as a result of slight pressure changes. Immediately following interstitial injections of tracer particles (ferritin, thorium, carbon, and latex spheres), many of the overlapped endothelial cells are separated and thus passageways are provided between the interstitium and lymphatic lumen. Tracer particles also occur in plasmalemmal invaginations along both connective tissue and luminal fronts. All of the tracer particles accumulate within large autophagic-like vacuoles. Very few particles of ferritin are observed in the endothelium after 24 hr; however, the vesicles containing the nonprotein tracer particles (carbon, thorium, and latex) increase in size and content and remain within the lymphatic endothelial cells up to 6 months. The role of vesicles in the transport of large molecules and particles is discussed in relation to the accretion of tracer particles within large vesicles and autophagic-like vacuoles in the endothelial cytoplasm.

Allergenic compounds on the inner and outer surfaces of natural latex gloves: MALDI mass spectrometry and imaging of proteinous allergens.

Natural latex gloves are the cause of a severe health problem to an increasing number of healthcare workers or patients due to the presence of protein allergens as Hevein or Rubber Elongation Factor (REF). One of the most challenging problems is the in situ localization of theses allergens in, e.g. gloves, to estimate the allergenic potential of the latex material. A sample preparation protocol applying a binary matrix-assisted laser desorption/ionization(MALDI) matrix containing alpha-cyano-4-hydroxy cinnamic acid (CHCA) and 2,5-dihydroxy benzoic acid (DHB) on trifluoro acetic acid (TFA) etched latex glove surfaces allowed the direct determination (exact molecular weight) of Hevein, REF and a truncated form of REF (tREF) within nine different brands of natural latex gloves by means of MALDI-TOF-MS in the linear mode. MALDI mass spectrometry demonstrated that Hevein, tREF and REF were present on the inner surfaces (in direct contact with the skin) of many, but not all, investigated gloves without any prior extraction procedure. Additionally, different isoforms of the allergen Hevein were detected (exhibiting ragged C-termini). tREF and REF could always be detected beside each other, but were not observed on every latex glove sample, which contained Hevein. It was also demonstrated that there is a significant difference in terms of proteins and polymers between inner and outer surfaces of gloves, which helps to explain the different allergenic potential of these.MALDI imaging allowed for the first time the unambiguous localization of all three allergens in parallel and showed that Hevein was present on 36% of the investigated area of a latex glove with a certain localization, whereupon, tREF and REF were only found on 25% of the investigated material.