Single-cell RNA-sequencing profiles reveal the developmental landscape of the Manihot esculenta Crantz leaves.

Cassava (Manihot esculenta Crantz) is an important crop with a high photosynthetic rate and high yield. It is classified as a C3-C4 plant based on its photosynthetic and structural characteristics. To investigate the structural and photosynthetic characteristics of cassava leaves at the cellular level, we created a single-cell transcriptome atlas of cassava leaves. A total of 11,177 high-quality leaf cells were divided into 15 cell clusters. Based on leaf cell marker genes, we identified 3 major tissues of cassava leaves, which were mesophyll, epidermis, and vascular tissue, and analyzed their distinctive properties and metabolic activity. To supplement the genes for identifying the types of leaf cells, we screened 120 candidate marker genes. We constructed a leaf cell development trajectory map and discovered 6 genes related to cell differentiation fate. The structural and photosynthetic properties of cassava leaves analyzed at the single cellular level provide a theoretical foundation for further enhancing cassava yield and nutrition.

Highly efficient removal of tannic acid from wastewater using biomimetic porous materials.

To effectively remove tannic acid (TA) from wastewater, using green and natural materials has attracted increasing attention. Inspired by Galla Chinensis (GC) with high content of TA, this study synthesized a biomimetic porous adsorbent to mimic the GC structure using dialdehyde tapioca starch (DTS) and gelatin (GL). The TA adsorption performance and mechanism of synthetic porous material were investigated. Results revealed that the porous material exhibited a maximum TA adsorption capacity of 1072.01 mg/g, along with a high removal rate of 95.16% under the conditions of a DTS-GL mass ratio of 1:1, DTS aldehyde content of 48.16%, a solid content of 5%, and a pH of 2 at 25 °C. The adsorption of TA by DTS was not affected by water-soluble cationic and anion. The adsorption kinetics of TA on the porous material followed the pseudo-second-order model, and this Langmuir adsorption model (R2 = 0.9954) which were well described the adsorption of TA by the material, indicating that the adsorption primarily occurred in a monolayer. FTIR, XRD, DSC, TG, XPS, and SEM-EDS were employed to characterize the structure characteristics of the porous material. The cross-linking between DTS and GL by Schiff base reaction imparted a chemical structure could absorb TA by hydrogen bonding. The TA desorption rates of in 30% acetone and 40% ethanol solutions were 88.76% and 91.03%, respectively. The porous material prepared by the GC-inspired approach holds promise as an ideal choice for loading polyphenolic compounds and provides a new perspective for the design and application of bioinspired engineering materials.

Heavy metal accumulation in root and shoot tapioca plant biomass grown in agriculture land situated around the magnesite mine tailings.

Heavy metal pollution in soil has emerged as a major environmental concern. This can be attributed to human activities such as mining, modern agriculture, and industrialization. This study was conducted to determine how heavy metals spread from mine tailings to surrounding farmland. Metal absorption and accumulation were also investigated in the root and shoot biomass of tapioca crops grown in those farmlands. Metal concentrations in MTAS1 were 85.3 ± 1.2, 45.8 ± 1.5, 134.8 ± 1.7, 92.4 ± 2.2, and 78.95 ± 1.4 mg kg-1, respectively. Heavy metal concentrations in MTAS2 and MTAS3 were found to be 79.62 ± 1.6, 75.4 ± 1.5, 41.31 ± 1.1, 47.8 ± 1.6, 142.5 ± 2.1, 128.4 ± 1.4, 86.2 ± 1.9, 79.5 ± 1.3, and 83.4 ± 1.2 mg kg-1, respectively. Tapioca crop shoot and root biomass grown at these metal polluted sites absorbed and accumulated significant amounts of Cd, Cu, Zn, Pb, Ni, and Mn. Notably, the metal content of the tapioca crop's root and shoot biomass exceeded national standards.

Dry residue of cassava on slow-growing broiler diets, with or without the addition of carbohydrases.

Dry residue of cassava was studied on the digestibility, performance, intestinal measurements, with or without inclusion of carbohydrases, of slow-growing broilers. 160 Label Rouge broiler chickens, 21-d-old, were distributed in a randomized, 2x5 factorial arrangement (male and female x 0, 10, 20, 30 and 40% residue) (metabolism trial). 1,100 male chicks were distributed in a 2x5 factorial arrangement (with/without carbohydrases x 0; 2.5; 5.0; 7.5; and 10.0% residue), with five replicates (performance trial). Increasing residue levels led to increases in energetic values. Feed intake from 1-21-d-old and 1-63-d-old decreased linearly. At 42 d-old, feed intake and weight gain levels exhibited a quadratic response, which predicted a highest value at 3.32% and 4.77%, respectively, for diets without carbohydrases. For 21- and 42-d-old chickens, the inclusion of carbohydrases reduced the weight and length of the small intestine. The energetic values of the diets were positively influenced by the residue and had similar digestibility values for both sexes. Inclusion of up to 10% of residue in slow-growing broiler diets does not impaired performance and intestinal morphology. The addition of carbohydrases reduced the viscosity of the digesta but it was not enough to improve the performance of the birds.

Batch and semi-continuous treatment of cassava wastewater using microbial fuel cells and metataxonomic analysis.

The treatment of agroindustrial wastewater using microbial fuel cells (MFCs) is a technological strategy to harness its chemical energy while simultaneously purifying the water. This manuscript investigates the organic load effect as chemical oxygen demand (COD) on the production of electricity during the treatment of cassava wastewater by means of a dual-chamber microbial fuel cell in batch mode. Additionally, specific conditions were selected to evaluate the semi-continuous operational mode. The dynamics of microbial communities on the graphite anode were also investigated. The maximum power density delivered by the batch MFC (656.4 µW m - 2 ) was achieved at the highest evaluated organic load (6.8 g COD L - 1 ). Similarly, the largest COD removal efficiency (61.9%) was reached at the lowest organic load (1.17 g COD L - 1 ). Cyanide degradation percentages (50-70%) were achieved across treatments. The semi-continuous operation of the MFC for 2 months revealed that the voltage across the cell is dependent on the supply or suspension of the organic load feed. The electrode polarization resistance was observed to decreases over time, possibly due to the enrichment of the anode with electrogenic microbial communities. A metataxonomic analysis revealed a significant increase in bacteria from the phylum Firmicutes, primarily of the genus Enterococcus.

Assessment of the chemical composition of buriti (Mauritia flexuosa Liliopsida) and cassava (Manihot esculenta Crantz) residues and their possible application in the bioproduction of coconut aroma (6 pentyl-α-pyrone).

This work aimed to define strategies to increase the bioproduction of 6 pentyl-α-pyrone (bioaroma). As first strategy, fermentations were carried out in the solid state, with agro-industrial residues: Mauritia flexuosa Liliopsida. and Manihot esculenta Crantz in isolation, conducting them with different nutrient solutions having Trichoderma harzianum as a fermenting fungus. Physicochemical characterizations, centesimal composition, lignocellulosic and mineral content and antimicrobial activity were required. Fermentations were conducted under different humidification conditions (water, nutrient solution without additives and nutrient solutions with glucose or sucrose) for 9 days. Bioaroma was quantified by gas chromatography, assisted by solid-phase microextraction. The results showed the low production of this compound in fermentations conducted with sweet cassava (around 6 ppm (w/w)). The low bioproduction with sweet cassava residues can probably be related to its starch-rich composition, homogeneous substrate, and low concentration of nutrients. Already using buriti, the absence of aroma production was detected. Probably the presence of silicon and high lignin content in buriti minimized the fungal activity, making it difficult to obtain the aroma of interest. Given the characteristics presented by the waste, a new strategy was chosen: mixing waste in a 1:1 ratio. This fermentation resulted in the production of 156.24 ppm (w/w) of aroma using the nutrient solution added with glucose. This combination, therefore, promoted more favorable environment for the process, possibly due to the presence of fermentable sugars from sweet cassava and fatty acids from the buriti peel, thus proving the possibility of an increase of around 2500% in the bioproduction of coconut aroma.

Influence of Lithium Triflate Salt Concentration on Structural, Thermal, Electrochemical, and Ionic Conductivity Properties of Cassava Starch Solid Biopolymer Electrolytes.

Cassava starch solid biopolymer electrolyte (SBPE) films were prepared by a thermochemical method with different concentrations of lithium triflate (LiTFT) as a dopant salt. The process began with dispersing cassava starch in water, followed by heating to facilitate gelatinization; subsequently, plasticizers and LiTFT were added at differing concentrations. The infrared spectroscopy analysis (FTIR-ATR) showed variations in the wavenumber of some characteristic bands of starch, thus evidencing the interaction between the LiTFT salt and biopolymeric matrix. The short-range crystallinity index, determined by the ratio of COH to COC bands, exhibited the highest crystallinity in the salt-free SBPEs and the lowest in the SBPEs with a concentration ratio (Xm) of 0.17. The thermogravimetric analysis demonstrated that the salt addition increased the dehydration process temperature by 5 °C. Additionally, the thermal decomposition processes were shown at lower temperatures after the addition of the LiTFT salt into the SBPEs. The differential scanning calorimetry showed that the addition of the salt affected the endothermic process related to the degradation of the packing of the starch molecules, which occurred at 70 °C in the salt-free SBPEs and at lower temperatures (2 or 3 °C less) in the films that contained the LiTFT salt at different concentrations. The cyclic voltammetry analysis of the SBPE films identified the redox processes of the glucose units in all the samples, with observed differences in peak potentials (Ep) and peak currents (Ip) across various salt concentrations. Electrochemical impedance spectroscopy was used to establish the equivalent circuit model Rf-(Cdl/(Rct-(CPE/Rre))) and determine the electrochemical parameters, revealing a higher conduction value of 2.72 × 10-3 S cm-1 for the SBPEs with Xm = 17 and a lower conduction of 5.80 × 10-4 S cm-1 in the salt-free SBPEs. It was concluded that the concentration of LiTFT salt in the cassava starch SBPE films influences their morphology and slightly reduces their thermal stability. Furthermore, the electrochemical behavior is affected in terms of variations in the redox potentials of the glucose units of the biopolymer and in their ionic conductivity.

Classification of industrial tapioca starch hydrolysis products based on their Brix and dextrose equivalent values using near-infrared spectroscopy.

BACKGROUND: Industrial starch hydrolysis allows the production of syrups with varying functionality depending on their Brix value and dextrose equivalent (DE). As the current methods for evaluating these products are labor-intensive and time-consuming, the objective of this study was to investigate the potential of near-infrared (NIR) spectroscopy for classifying the different tapioca starch hydrolysis products. RESULTS: NIR spectra of samples of seven products (n = 410) were recorded in transflectance mode in the 12 000-4000 cm-1 range. Next, orthogonal partial least squares (OPLS) regression models were built to predict the Brix and DE values of the different samples. To classify the different starch hydrolysis products, support vector machines (SVM) were trained using either the raw spectra or latent variables (LVs) obtained from the OPLS models. The best classification accuracy was obtained by the SVM classifier based on the LVs from the OPLS model for DE prediction, resulting in 95% correct classification over all classes. CONCLUSION: These results show the potential of NIR spectroscopy for classifying tapioca starch hydrolysis products with respect to their functional properties related to the Brix and DE values. © 2024 Society of Chemical Industry.

Definition of sensory and instrumental thresholds of acceptability for selection of cassava genotypes with improved boiling properties.

BACKGROUND: Consumers of boiled cassava in Africa, Latin America and Asia use specific preference criteria to evaluate its cooking quality, in terms of texture, colour and taste. To improve adoption rates of improved cassava varieties intended for consumption after boiling, these preference criteria need to be determined, quantified and integrated as post-harvest quality traits in the target product profile of boiled cassava, so that breeding programs may screen candidate varieties based on both agronomic traits and consumer preference traits. RESULTS: Surveys of various end-user groups identified seven priority quality attributes of boiled cassava covering root preparation, visual aspect, taste and texture. Three populations of contrasted cassava genotypes, from good-cooking to bad-cooking, in three countries (Uganda, Benin, Colombia) were then characterized according to these quality attributes by sensory quantitative descriptive analysis (QDA) and by standard instrumental methods. Consumers' preferences of the texture attributes mealiness and hardness were also determined. By analysis of correlations, the consumers' preferences scores were translated into thresholds of acceptability in terms of QDA scores, then in terms of instrumental measurements (water absorption during boiling and texture analysis). The thresholds of acceptability were used to identify among the Colombian and Benin populations promising genotypes for boiled cassava quality. CONCLUSION: This work demonstrates the steps of determining priority quality attributes for boiled cassava and establishing their corresponding quantitative thresholds of acceptability. The information can then be included in boiled cassava target product profiles used by cassava breeders, for better selection and adoption rates of new varieties. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Enhanced gelling property and freeze-thaw stability of potato, tapioca and corn starches modified by mild heating in aqueous ethanol solution.

BACKGROUND: Physically modified starches can be classified as natural ingredients on food labels and clean label products. Thus, the market demand for physically modified starch is increasing. Potato, tapioca and corn starches were physically modified by mild heat treatment in an alcoholic solution to enhance their gelling property and freeze-thaw stability. RESULTS: During mild heating of starch suspension (40% w/w) in 10% ethanol solution at the onset gelatinization temperature, granular swelling of starch occurred, followed by amylose leaching with medication of the surface structure of the starch granules. All treated starches exhibited increased gelatinization and pasting temperatures and decreased breakdown for pasting as a result of improved stability against shear and heat. The treated starches had higher hardness, cohesiveness and springiness of gel than the respective native starches, and these gel properties were more pronounced in potato starch than in tapioca and corn starches. The treated starches showed substantially reduced gel syneresis during freeze-thawing. CONCLUSION: Physical modification of starch by mild heat treatment in an alcoholic solution substantially improved its gelation ability and freeze-thaw stability. © 2024 Society of Chemical Industry.

Cassava retting ability and textural attributes of fufu for demand-driven cassava breeding.

BACKGROUND: Cassava retting ability and the textural qualities of cooked fufu are important quality traits. Cassava retting is a complex process in which soaking causes tissue breakdown, starch release, and softening. The rate at which various traits linked to it evolve varies greatly during fufu processing. According to the literature, there is no standard approach for determining retting ability. The retting indices and textural properties of fufu were measured using both manual and instrumental approaches. RESULTS: Different protocols were developed to classify 64 and 11 cassava genotypes into various groups based on retting ability and textural qualities, respectively. The retting protocols revealed considerable genetic dissimilarities in genotype classification: foaming ability and water clarity should be measured at 24 h, while penetrometer, hardness, turbidity, pH, and total titratable acidity data are best collected after 36 h. The stepwise regression model revealed that pH, foaming ability, and dry matter content are the best multivariates (with the highest R2) for predicting cassava retting. These predictors were used to develop an index for assessing the retting ability of cassava genotypes. The retting index developed showed a significant relationship with dry matter content and fufu yield. The study also showed significant correlations between instrumental cohesiveness and sensory smoothness (r = -0.75), moldability (r = -0.62), and stretchability (r = 0.78). Instrumental cohesiveness can correctly estimate fufu smoothness (R2 = 0.56, P = 0.008) and stretchability (R2 = 0.60, P = 0.005). CONCLUSION: pH, foaming ability, and dry matter content are the best traits for predicting cassava retting ability, while instrumental cohesiveness can effectively estimate fufu smoothness and stretchability. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

In vitro gastrointestinal simulated digestion of three plant proteins: determination of digestion rate, free amino acids and peptide contents.

Cassava protein (CP), barley protein (BP) and yellow pea protein (YPP) are important nutrient and integral constituent of staple in pet foods. It is known that the digestion of proteins directly influences their absorption and utilisation. In the present work, we performed in vitro simulated gastrointestinal digestion of three plant proteins as a staple for dog and cat food. The digestion rate of CP, BP and YPP in dog food was 56.33 ± 0.90%, 48.53 ± 0.91%, and 66.96 ± 0.37%, respectively, whereas the digestion rate of CP, BP, and YPP in cat food was 66.25 ± 0.72%, 43.42 ± 0.83%, and 58.05 ± 0.85%, respectively. Using SDS-polyacrylamide gel electrophoresis to determine the molecular weight (MW) of each protein and the products of their digestion, it was revealed that MW of digestion samples decreased, and MW during the small intestine phase was lower than that during the gastric phase. Peptide sequences of digested products were identified by liquid chromatography-tandem mass spectrometry (LC-MS/MS), and it was found that the total number of peptides in the small intestine digestion samples was higher than that in the gastric phase samples. The MW of peptides obtained from CP was within the range of 1000-1500 Da, while MW of peptides derived from BP and YPP was within the range of 400-2000 Da. In addition, free amino acids were mainly produced in the small intestine phase. Furthermore, the percentage of essential amino acids in the small intestine phase (63 ~ 82%) was higher than that in the gastric phase (37 ~ 63%). Taken together, these findings contribute to the current understanding of the utilisation of plant proteins in dog and cat foods and provide important insights into the selection and application of plant proteins as a staple in dog and cat foods.

Effect of fermented Cassava sievate and tiger nut shaft on growth performance, blood profile and immunological parameters in male rabbits.

This study examined the effects of using mushroom mycelium to ferment tigernut and cassava pulp on the growth performance, haematology and immunology of rabbits. Seventy-five New Zealand Bulk grower rabbits were randomly distributed to four treatment groups and a control group in a completely randomized approach. The treatment groups were fed with formulated experimental diets containing one of fermented tigernut drink by-product (FT), fermented cassava sievate (FC), unfermented tigernut drink by-product (UT), or unfermented cassava sievate (UC). The control group was fed a basal diet with no additives. The proximate composition of the fermented feed was analyzed. The weight gain of the animals was, 834.5, 633, 790, 510, and 706 g for control, FT, FC, UT, and UC respectively. The packed cell volume (PCV) for animals in the control group, FT, and FC are 34.33, 37.26, and 32.29% respectively. The red blood cell (RBC) of the FT was favourably improved (5.53 × 1012/L) compared to those of UT (2.28 × 1012/L), while there was a reduction in the red blood cell count of FC group (1.02 × 1012/L). Conclusively, the inclusion of fermented tiger nut drink by-product in rabbit feed improved the PCV and RBC of the rabbits' understudy but did not affect their growth performance.

Effects of cassava root meal on the growth performance, apparent nutrient digestibility, organ and intestinal indices, and slaughter performance of yellow-feathered broiler chickens.

With the global population growth and shortage of food, the competition between humans and animal for food will become increasingly fierce. Therefore, the development of unconventional energy feed cassava feed is of great significance. The objective of this study was to investigate the effects of cassava root meal (CRM) on the growth performance, apparent digestibility, and organ and intestinal indices of broiler chickens. A total of 140 one-day-old chicks were randomly assigned to four dietary treatment groups [control diet (CT), 15% CRM (CRM15), 30% CRM (CRM30), and 45% CRM (CRM45)] with five replicates of seven birds per replicate. The results showed that the body weight of broiler chickens fed diets containing CRM were significantly lower than that in the CT group at 21 and 42 days of age, the average daily gain and average daily feed intake in the CRM group were significantly lower than those in the CT group from 1 to 21 days of age. However, from days 22 to 42, there were no significant differences between CRM15 and CT birds regarding average daily gain and average daily feed intake. but there was no difference in feed conversion rate between the CRM15 and CT groups. At 42 days of age, there were no significant differences between CRM15 and CT birds in in body measurements, the slaughter performance and the percentage of semi-eviscerated yield. The addition of CRM reduced the proportion of breast and thigh muscles during the feeding period, although we detected no significant difference between CRM15 and CT regarding the apparent digestibility of nutrients. Collectively, our findings indicate that 15% cassava was the optimal proportion for supplementing diets for broiler chicken production.

Determining the heat of desorption for cassava products based on data measured by an automated gravimetric moisture sorption system.

BACKGROUND: The isosteric heat of desorption is vital in evaluating the energy performance of food dryers. The isosteric heat of desorption was investigated for different cassava (Manihot esculenta Crantz) products prepared as flour or starch, with and without fermentation. An automated moisture sorption gravimetric analyser was used to measure the desorption isotherms over 10-90% relative humidity of the drying air at temperatures ranging from 25 to 65 °C. RESULTS: Analysis of variance showed an imperceptible contribution of the preparation method in the measured desorption data. This finding also agreed with microscopical images, which revealed the lack of compelling structural differences among different products. A set of empirical sorption equations suggested by the ASAE standard was examined over the measured desorption isotherms. The standard error of estimation was found to be in the acceptable range of 2.36-3.71%. Furthermore, the fulfilment of the enthalpy-entropy compensation theory was considered as an additional criterion in the thermodynamic results of different sorption equations, besides their fitting adequacy. The modified Chung-Pfost equation has proved to be the most suitable equation for cassava products, as it is capable of reflecting the temperature dependency of the isosteric heat of desorption. The net isosteric heat of desorption obtained was in the range of 540-1110 kJ kg-1 for 0.10 kg kg-1 dry-basis moisture content and 52-108 kJ kg-1 for 0.25 kg kg-1 dry-basis moisture content. CONCLUSION: These findings are technologically relevant for optimising common drying technologies such as flash and flatbed dryers. © 2022 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Solid-state fermentation of cassava (Manihot esculenta Crantz): a review.

Solid-state fermentation (SSF) is a promising technology for producing value-added products from cassava (Manihot esculenta Crantz). In this process, microorganisms are grown on cassava biomass without the presence of free-flowing liquid. Compared to other processing methods, SSF has several advantages, such as lower costs, reduced water usage, and higher product yields. By enhancing the content of bioactive compounds like antioxidants and phenolic compounds, SSF can also improve the nutritional value of cassava-based products. Various products, including enzymes, organic acids, and biofuels, have been produced using SSF of cassava. Additionally, SSF can help minimize waste generated during cassava processing by utilizing cassava waste as a substrate, which can reduce environmental pollution. The process has also been explored for the production of feed and food products such as tempeh and cassava flour. However, optimizing the process conditions, selecting suitable microbial strains, and developing cost-effective production processes are essential for the successful commercialization of SSF of cassava.

Enhanced production of surfactin using cassava wastewater and hydrophobic inducers: a prospection on new homologues.

Biosurfactants are amphipathic molecules that can be applied in a wide range of areas. The cost of production limits the industrial application of biosurfactants. Nevertheless, the biosurfactant productivity can be easily enhanced by inducers. This work aimed to investigate the effect of hydrophobic inducers on surfactin production by B. subtilis ATCC 6633 using cassava wastewater as low-cost culture medium. The submerged cultivation was carried out at 30 °C, 150 rpm for 72 h. The fermentation parameters used were bacterial growth, consumption of sugars, and surfactin production, including surfactin homologues. The surface tension decreased by 40% after 12 h, when compared to control. Depletion of sugars was observed in all experiments. Palmitic acid led to the highest yield in terms of surfactin production (≈ 1.3 g·L- 1 of pure surfactin). The inducers triggered the production of new surfactin homologues, that represent, potentially, new biological activities.

Utilisation of cassava as energy and protein feed resource in broiler chicken and laying hen diets.

A detailed understanding of the nutrient contents of cassava products is crucial to fully maximise their utilisation in animal feed. This study aimed to review published data on the nutritional quality of cassava products and their use as a source of energy and protein in broiler chicken and laying hen diets. Cassava is a tuber crop that grows abundantly in tropical countries, and its products are classified as energy or protein feed resources based on their protein and energy levels. Cassava starch residue (CSR), cassava root meal (CRM), cassava peel meal (CPM), ensiled cassava peel meal (ECPM), fermented cassava peel meal (FCPM), cassava pulp, and cassava root sievate meal (CRSM) were classified as an energy source in chicken feed, whereas cassava leaf meal (CLM) is classified as a protein source. Nutritional analysis indicates that cassava leaves are high in protein, fibre, minerals, vitamins (B1, B2, and C), and carotenoids, while CRM is rich in energy but low in crude protein (CP). Additionally, cassava contains cyanogenic glycosides, especially linamarin, and lotaustralin, which release toxic hydrogen cyanide (HCN) upon tissue disruption. The utilisation of cassava as an energy or protein feed resource in the chicken diet is limited by its high fibre, presence of HCN, nutrient imbalance, and dusty nature of its dried meals. Efforts have been made to enhance the nutrient quality of cassava and increase their utilisation in chicken feed using different processing techniques with some success. Available information on the nutrient contents of differently processed cassava and its effect on chicken performance is vast and dispersed, making it hard to use such information in the decision-making process. Therefore, this review aimed to aggregate published articles on the nutrient contents of cassava products and their impacts on the health and productive indices of broiler chickens and laying hens into a single document for ease of comparison and decision-making.

Green and clean modification of cassava starch - effects on composition, structure, properties and digestibility.

There is a growing need for clean and green labeling of food products among consumers globally. Therefore, development of green modified starches, to boost functionality, palatability and health benefits while reducing the negative processing impacts on the environment and reinforcing consumer safety is in high demand. Starch modification started in mid-1500s due to the inherent limitations of native starch restricting its commercial applications, with chemical modification being most common. However, with the recent push for "chemical-free" labeling, methods of physical and enzymatic modification have gained immense popularity. These methods have been successfully used in numerous studies to alter the composition, structure, functionality and digestibility of starch and in this review, studies reported on green modification of cassava starch, one of the most common utilized starches, within the last ten years have been critically reviewed. Recent research has introduced starch as an abundant, natural substrate for producing resistant starches through biophysical technologies that act as dietary fiber in the human body. It is evident that different techniques and processing parameters result in varying degrees of modification impacting the techno-functionality and digestibility of the resultant starch. This can be exploited by researchers and industrialists in order to customize starch functionality in accordance with application.

Effect of the seed coating with biomass of Dunaliella salina on early plant growth and in the secondary metabolites content of Coriandrum sativum.

The environmental and health risks associated with the application of synthetic chemical inputs in agriculture increased the demand for technologies that allow higher performance and quality of vegetable crops by implementing synergistic materials with the principles of sustainability. In this work, the seed coating with the biomass of Dunaliella salina incorporated in a bioplastic film of Manihot esculenta (cassava) was evaluated as an initial growth and secondary compounds stimulator of Coriandrum sativum (coriander) plants. The obtained results demonstrated that the coating stimulated an increase in the germination percentage (28.75%) and also in concentration of bioactive compounds, such as the six-fold increment of caffeic acid (13.33 mg 100 g-1). The carbohydrates, lipids, and proteins present in the microalgae biomass seem to be responsible for these increments once they are known for providing energy to the seedling development and coordinating the secondary metabolites synthesis. As conclusion, we consider the coating with biomass of D. salina an alternative for crop improvement that contributes to the development of sustainable agricultural practices.