Molecularly Imprinted Drug Carrier for Lamotrigine-Design, Synthesis, and Characterization of Physicochemical Parameters.

This study presents the initial attempt at introducing a magnetic molecularly imprinted polymer (MIP) designed specifically for lamotrigine with the purpose of functioning as a drug carrier. First, the composition of the magnetic polymer underwent optimization based on bulk polymer adsorption studies and theoretical analyses. The magnetic MIP was synthesized from itaconic acid and ethylene glycol dimethacrylate exhibiting a drug loading capacity of 3.4 ± 0.9 µg g-1. Structural characterization was performed using powder X-ray diffraction analysis, vibrating sample magnetometry, and Fourier transform infrared spectroscopy. The resulting MIP demonstrated controlled drug released characteristics without a burst effect in the phospahe buffer saline at pH 5 and 8. These findings hold promise for the potential nasal administration of lamotrigine in future applications.

Unlocking New Avenues: Solid-State Synthesis of Molecularly Imprinted Polymers.

Molecularly imprinted polymers (MIPs) are established artificial molecular recognition platforms with tailored selectivity towards a target molecule, whose synthesis and functionality are highly influenced by the nature of the solvent employed in their synthesis. Steps towards the "greenification" of molecular imprinting technology (MIT) has already been initiated by the elaboration of green MIT principles; developing MIPs in a solvent-free environment may not only offer an eco-friendly alternative, but could also significantly influence the affinity and expected selectivity of the resulting binding sites. In the current study the first solvent-free mechanochemical synthesis of MIPs via liquid-assisted grinding (LAG) is reported. The successful synthesis of the imprinted polymer was functionally demonstrated by measuring its template rebinding capacity and the selectivity of the molecular recognition process in comparison with the ones obtained by the conventional, non-covalent molecular imprinting process in liquid media. The results demonstrated similar binding capacities towards the template molecule and superior chemoselectivity compared to the solution-based MIP synthesis method. The adoption of green chemistry principles with all their inherent advantages in the synthesis of MIPs may not only be able to alleviate the potential environmental and health concerns associated with their analytical (e.g., selective adsorbents) and biomedical (e.g., drug carriers or reservoirs) applications, but might also offer a conceptual change in molecular imprinting technology.

Green synthesis as a simple and rapid route to protein modified magnetic nanoparticles for use in the development of a fluorometric molecularly imprinted polymer-based assay for detection of myoglobin.

We have developed a low-cost molecularly imprinted polymer (MIP)-based fluorometric assay to directly quantify myoglobin in a biological sample. The assay uses a previously unreported method for the development of microwave-assisted rapid synthesis of aldehyde functionalized magnetic nanoparticles, in just 20 min. The aldehyde functionalized nanoparticles have an average size of 7.5 nm ± 1.8 and saturation magnetizations of 31.8 emu g-1 with near-closed magnetization loops, confirming their superparamagnetic properties. We have subsequently shown that protein tethering was possible to the aldehyde particles, with 0.25 ± 0.013 mg of myoglobin adsorbed to 20 mg of the nanomaterial. Myoglobin-specific fluorescently tagged MIP (F-MIP) particles were synthesized and used within the assay to capture myoglobin from a test sample. Excess F-MIP was removed from the sample using protein functionalized magnetic nanoparticles (Mb-SPION), with the remaining sample analyzed using fluorescence spectroscopy. The obtained calibration plot of myoglobin showed a linear correlation ranging from 60 pg ml-1 to 6 mg ml-1 with the limit of detection of 60 pg ml-1. This method was successfully used to detect myoglobin in spiked fetal calf serum, with a recovery rate of more than 93%.

Development of hydrophilic magnetic molecularly imprinted polymers for the dispersive solid-phase extraction of sulfonamides from animal-derived samples before HPLC detection.

Highly hydrophilic magnetic molecularly imprinted polymers were prepared through a surface imprinting technique for dispersive solid-phase extraction coupled with high-performance liquid chromatography to detect trace levels of ten sulfonamides in animal-derived samples. The obtained imprinted polymers were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and adsorption experiments, which exhibited excellent specific adsorption for template sulfamethazine in aqueous solution. Moreover, the adsorption process could be completed within 25 min. Under the optimum conditions, the method exhibits good linear performance in the range of 5-to 10 mg/L, limits of detection ranging from 0.57 to 1.50 µg/L, and good recoveries of 85.09-110.93% in the spiked samples (chicken, cow milk, and goat milk). The proposed detection method not only avoids the use of organic solvents but also simplifies the pretreatment procedure via excellent magnetic properties. Furthermore, the method shows great potential for the rapid detection of drug residues.

Computational modeling, fabrication, and characterization of the deep eutectic solvent-based green molecular cage for selective metronidazole extraction from plasma followed by UHPLC with diode array detector determination.

Four ternary deep eutectic solvents were computationally designed and synthesized, being used as candidate functional monomers in metronidazole molecular imprinting polymer synthesis, allowing selective extraction and determination by ultra high performance liquid chromatography with diode array detection. In terms of metronidazole selective extraction, the best results were obtained by (deep eutectic solvent)2 :(ethylene glycol dimethacrylate)11 , in which deep eutectic solvent is the functional monomer constructed by combining three components in 6:6:2 ratios of choline chloride:ethylene glycol:methacrylic acid. The effects of different parameters on molecular imprinted solid-phase extraction of metronidazole were thoroughly explored through screening design and response surface methodology. The adsorption mechanism findings show that the adsorption data are primarily fitted on the Freundlich model based on higher correlation coefficient. Kinetic experiments have shown that the mechanism of adsorption fits the pseudo-second-order model. The best extraction recovery (96.5%) was obtained in 25-min elution time, desorption temperature of 40°C, and 1.0 mL ACN as eluent. Metronidazole was measured by a validated ultra high performance liquid chromatography with diode array detection method. The calibration of the method was linear in the range of 0.1-10 µg/mL with limits of detection and quantification of 0.03 and 0.1 µg/mL, respectively. The method was successfully applied for the determination of metronidazole in human plasma.

Hydrophilic molecularly imprinted polymers functionalized magnetic carbon nanotubes for selective extraction of cyclic adenosine monophosphate from winter jujube.

In this work, a green strategy was developed to prepare molecularly imprinted polymers functionalized magnetic carbon nanotubes in aqueous phase under mild conditions for cyclic adenosine monophosphate. Thanks to water solubility of chitosan, a natural polysaccharide which is rich in amino and hydroxyl groups, provided the feasibility to synthesize the green molecularly imprinted polymers for water soluble template in aqueous media. Coupled with high-performance liquid chromatography, the method exhibited a short equilibrium time (6 min), high adsorption capacity (22.42 µg/mg), high magnetic susceptibility, and good selectivity to template molecule with the imprinting factor of 2.94. A good linearity in the range of 0.020-3.0 mg/mL for target was obtained with a correlation coefficient of 0.9998. The limit of detection (signal-to-noise ratio = 3) and limit of quantitation (signal-to-noise ratio = 10) of the magnetic solid phase extraction method for cyclic adenosine monophosphate were 5 and 15 ng/mg, respectively. And the practical application of chitosan-based molecularly imprinted polymers as adsorbent to isolate and determine cyclic adenosine monophosphate in real natural samples (winter jujube) was demonstrated.

Fluorescent polydopamine based molecularly imprinted sensor for ultrafast and selective detection of p-nitrophenol in drinking water.

A highly effective fluorescent molecularly imprinted sensor (F-PDA-MIS) based on fluorescent polydopamine (F-PDA) was successfully synthesized for selective and ultrafast detection of p-nitrophenol (P-NP) in drinking water. F-PDA with abundant surface functional groups has been artfully modified to firstly serve as both fluorescent monomer and functional monomer in the synthesis of a uniform luminous F-PDA-MIS, which can greatly improve the detection efficiency. As expected, F-PDA-MIS had an obvious emission wavelength of 535 nm with the optimal excitation wavelength at 400 nm. Specially, F-PDA-MIS could detect P-NP in the range 100 to 1100 nM with much lower detection limit of 24.2 nM within 120 s compared with other conventional imprinted fluorescent sensors based on pure quantum dots (QDs) or dyes. This excellent test phenomenon is mainly ascribed to the rapid electron transfer between F-PDA and P-NP. Satisfactory recovery of 98.0-104% for mineral water and 98.6-106% for boiling water were obtained with relative standard deviations (RSDs) of 2.7-3.4% and 2.6-3.5% respectively. The detection reliability of F-PDA-MIS was verified by the comparison with high-performance liquid chromatography (HPLC-UV). Consequently, F-PDA as a fluorescence functional monomer has been shown to be a possible strategy to effectively improve the detection limit and shorten response time of the target determination in water..

Imprinted ß-ketoenamine-linked covalent organic frameworks as dispersive sorbents for the fluorometric determination of timolol.

Timolol accompanied the formation of fluorescent ß-ketoenamine-linked covalent organic frameworks (COFs) via the Sc(Tof)3-catalyzed condensation of derivated carbaldehyde and hydrazide in a 1,4-dioxane/mesitylene porogen to construct timolol-imprinted COFs (TICOFs). With high imprinting factors, the synthesis-optimized TICOFs were characterized by fluorescence, UV-Vis spectrometry, X-ray diffraction, N2 adsorption/desorption analyses, scanning electron microscopy, and FTIR spectrometry. The TICOF fluorescence measured at 390 nm/510 nm is dynamically quenched by timolol and was thus utilized to quantify timolol in a linear range of 25-500 nM with a LOD of 8 nM. The TICOF recovered 99.4% of 0.5% timolol maleate in a commercial eye drop (RSD = 1.1%, n = 5). In addition, TICOF was used as a dispersive sorbent to recover 95% of 2.0 nM timolol from 20 mg of TICOF in 25 mL phosphate buffer. Dilution factors of 25 and 75 were the maximum tolerated proportions of the urine and serum matrix spiked with 2.0 nM timolol to reach recoveries of 92.4% and 90.3%, respectively.

Molecularly Imprinted Polymers (MIPs) in Sensors for Environmental and Biomedical Applications: A Review.

Molecular imprinted polymers are custom made materials with specific recognition sites for a target molecule. Their specificity and the variety of materials and physical shapes in which they can be fabricated make them ideal components for sensing platforms. Despite their excellent properties, MIP-based sensors have rarely left the academic laboratory environment. This work presents a comprehensive review of recent reports in the environmental and biomedical fields, with a focus on electrochemical and optical signaling mechanisms. The discussion aims to identify knowledge gaps that hinder the translation of MIP-based technology from research laboratories to commercialization.

Molecularly Imprinted Polymers Combined with Electrochemical Sensors for Food Contaminants Analysis.

Detection of relevant contaminants using screening approaches is a key issue to ensure food safety and respect for the regulatory limits established. Electrochemical sensors present several advantages such as rapidity; ease of use; possibility of on-site analysis and low cost. The lack of selectivity for electrochemical sensors working in complex samples as food may be overcome by coupling them with molecularly imprinted polymers (MIPs). MIPs are synthetic materials that mimic biological receptors and are produced by the polymerization of functional monomers in presence of a target analyte. This paper critically reviews and discusses the recent progress in MIP-based electrochemical sensors for food safety. A brief introduction on MIPs and electrochemical sensors is given; followed by a discussion of the recent achievements for various MIPs-based electrochemical sensors for food contaminants analysis. Both electropolymerization and chemical synthesis of MIP-based electrochemical sensing are discussed as well as the relevant applications of MIPs used in sample preparation and then coupled to electrochemical analysis. Future perspectives and challenges have been eventually given.

Synthesis and characterization of core-shell magnetic molecularly imprinted polymers for selective extraction of allocryptopine from the wastewater of Macleaya cordata (Willd) R. Br.

A novel type of magnetic molecularly imprinted polymers (MMIP) as the solid-phase extraction sorbent was prepared, which can extract effectively the allocryptopine from the waster of Macleaya cordata (Willd) R. Br. In this study, MMIP was synthesized by using Fe3 O4 @SiO2 , 4-vinyl-pyridine, ethylene glycol dimethacrylate, and allocryptopine, and these ingredients worked as magnetic core, functional monomer, cross-linker, and template, respectively. Concluded by the calculation of Gaussian 09 software, different ratio models of 4-vinyl-pyridine and allocryptopine were simulated, and the optimal ratio was 1:5 and the energy was -2205.34 kJ/mol. Transmission electron microscopy, vibration sample magnetometry, X-ray diffraction, Fourier transform infrared spectroscopy, and thermogravimetric analysis were used to determine the morphology and structure of MMIP. Furthermore, the results of adsorption experiments indicated that MMIP had high selectivity, excellent recyclability, and good adsorption performance (9.86 mg/g, 298 K). The adsorption process was consistent with the Langmuir adsorption isotherm (R2 > 0.98, 298 K) and pseudo-second-order kinetics model (R2 > 0.99, 298 K). After six times adsorption-desorption experiments, the adsorption amount of MMIP only reduced to 8.5%. In the experiments of selective adsorption, MMIP has better adsorption properties for allocryptopine (ALL, C21 H23 NO5 ) than those having the same functional group. The limit of detection (LOD) was 0.4 µg/mL. The relative standard deviation ranged from 0.09% to 0.72%. The recovery of allocryptopine in samples ranged from 93.60% to 106.19%. In addition, the synthesized complex had a certain adsorption effect on allocryptopine separating from the wastewater of Macleaya cordata (Willd) R. Br.

Probing Peptide Sequences on Their Ability to Generate Affinity Sites in Molecularly Imprinted Polymers.

An array of 4000 defined and addressable tripeptides on a polymer-coated glass slide is used to synthesize molecularly imprinted polymer (MIP) nanoparticles. This work is undertaken to systematically probe the impact of the peptide sequence on the ability to generate affinity MIPs. The polymer affinity is assessed by measuring the fluorescence of bound MIP nanoparticles at each peptide spot on the surface after washing the array to remove any low-affinity polymer. The generic composition commonly used in the preparation of MIPs against proteins seems to be equally suitable for imprinting hydrophobic and hydrophilic tripeptides. The amino acids frequently contributing to the formation of high-affinity MIPs include T, F, D, N, Y, W, and P. The amino acids that rarely contribute to the formation of high-affinity interactions with MIPs are G, V, A, L, I, and M. These observations are confirmed by computational modeling. The basic technique proposed here may be applicable in optimizing polymer compositions for the production of high-affinity MIPs or, more specifically, for the selection of appropriate amino acid sequences when peptide epitopes are used instead of whole protein imprinting.

Synthesis of molecularly imprinted polymer adsorbents for solid-phase extraction of strobilurin fungicides from agricultural products.

Molecularly imprinted polymers for strobilurin fungicides were prepared by precipitation polymerization employing azoxystrobin as template molecular together with methacrylic acid monomer and trimethylolpropane triacrylate cross-linker. Morphological characterization showed molecularly imprinted polymers were uniform spherical particles with about 0.2 µm in diameter, while the morphologies of nonimprinted polymers were irregular bulk. The equilibrium binding and selective experiments proved that molecularly imprinted polymers possessed a higher affinity toward four fungicides compared to nonimprinted polymers and heterogeneous binding sites were found in the molecularly imprinted polymers. Molecularly imprinted solid-phase extraction conditions, including sample loading solvents, selective washing, and elution solvents, were carefully optimized. The developed method showed good recoveries (70.0-114.0%) with relative standard deviations in range of 1.0-9.8% (n  = â€¯3) for samples (cucumber and peach) spiked at three different levels (10, 50, and 100 µg/ kg). The detection limit (signal/noise = 3) ranged from 0.01 to 0.08 µg/kg. The results demonstrated good potential use of this convenient and highly efficient method for determining trace strobilurin fungicides in agricultural products.

Preparation and characterization of molecularly imprinted polymers based on ß-cyclodextrin-stabilized Pickering emulsion polymerization for selective recognition of erythromycin from river water and milk.

Molecularly imprinted polymers were prepared via ß-cyclodextrin-stabilized oil-in-water Pickering emulsion polymerization for selective recognition and adsorption of erythromycin. The synthesized molecularly imprinted polymers were spherical in shape, with diameters ranging from 20 to 40 µm. The molecularly imprinted polymers showed high adsorption capacity (87.08 mg/g) and adsorption isotherm data fitted well with Langmuir model. Adsorption kinetics study demonstrated that the molecularly imprinted polymers acted in a fast adsorption kinetic pattern and the adsorption features of molecularly imprinted polymers followed a pseudo-first-order model. Adsorption selectivity analysis revealed that molecularly imprinted polymers had a much better specificity for erythromycin than that for spiramycin or amoxicillin, and the relative selectivity coefficient values on the bases of spiramycin and amoxicillin were 3.97 and 3.86, respectively. The Molecularly imprinted polymers also showed a satisfactory reusability after four times of regeneration. In addition, molecularly imprinted polymers exhibited good adsorption capacities for erythromycin under complicated environment, that is, river water and milk. These results proved that the as-prepared molecularly imprinted polymers is a potent absorbent for selective recognition of erythromycin, and therefore it may be a promising candidate for practical applications, such as wastewater treatment and detection of erythromycin residues in food.

Thermosensitive molecularly imprinted polymer coupled with HPLC for selective enrichment and determination of matrine in traditional Chinese medicine.

In this study, a temperature-sensitive molecularly imprinted polymer was prepared by using the bifunctional monomer with the critical phase transition characteristics. Infrared spectrometry, scanning electron microscopy, and specific surface area testing were used to characterize the polymers. Then, the recognizing properties of the polymers were studied. Based on the prepared smart polymers, an SPE-HPLC analytical method for the determination of quinolizidine alkaloids in the extracts of Sophora flavescens was established and verified. Finally, the smart polymers were applied to the enrichment of quinolizidine alkaloids in plant extracts. By changing the temperature and solvents of the solid phase extraction conditions, the extraction process can increase the concentration of quinolizidine alkaloids by 4.3 to 5.2 folds. The extraction process has mild conditions and less time consumption, avoiding the use of a large number of toxic reagents, which indicate that the extraction process are more efficient and environmentally friendly.

Theoretical design and preparation research of molecularly imprinted polymers for steviol glycosides.

In this paper, a novel molecularly imprinted polymer (MIP) for specific adsorption of steviol glycosides was designed, and the imprinting mechanism of self-assembly system between template and monomers was clearly explored. Firstly, steviol (STE) was chosen as dummy template, and the density functional theory (DFT) at B3LYP/6-31 + G (d, p) level was used to select monomers, imprinting molar ratios, solvents, and cross-linking agents. The selectivity to five steviol glycosides was also calculated. Importantly, reduced density gradient (RDG) theory combined with atom in molecules (AIM) and infrared spectrum (IR) was applied to investigate the bonding situation and the nature of noncovalent interaction in self-assembly system. The theoretical designed results showed that the template which interacts with acrylic acid (AA) has the minimum binding energy, and the complex with the molar ratio of 1 : 4 has the most stable structure. Toluene (TL) and ethylene glycol dimethacrylate (EGDMA) were chosen as the optimal solvent and cross-linking agent, respectively. Five hydrogen bonds formed in the self-assembly system are the key forces at the adsorption sites of MIPs through the RDG and AIM analyses. The MIPs were synthesized by theoretical predictions, and the results showed that the maximum adsorption capacity towards dulcoside A is 26.17 mg/g. This work provided a theoretical direction and experimental validation for deeper researches of the MIPs for steviol glycosides. In addition, the method of RDG theory coupled with AIM and IR also could be used to analyze other imprinting formation mechanisms systematically.

Ultra-durable, multi-template molecularly imprinted polymers for ultrasensitive monitoring and multicomponent quantification of trace sulfa antibiotics.

Traditional analysis methods are susceptible to interference caused by the complexity of sample matrices, and detector surface fouling arising from nonspecific adsorption of microorganisms (in biological samples) which leads in particular to a gradual loss of sensitivity. Imprinted materials can be used to effectively reduce interference originating in the matrices. However, the poor reproducibility and multicomponent quantification of trace antibiotics represent significant challenges to the detection process. Meanwhile, the high biological risk presented by bacterial antibiotic immunity and the persistence of antibiotics in foodstuffs, especially meat, both caused by the overuse of sulfonamide antibiotics, remain urgent issues. Here, we present the first example of a method for the accurate quantification of trace sulfa antibiotics (SAs) based on multi-template imprinted polymers (MMIPs). Levels of multiple SAs have been simultaneously successfully quantified by applying MMIP extraction coupled with UPLC-MS/MS analysis. This method shows excellent linearity of detection in the range of 0.1-500 µg L-1, and ultrasensitivity with low limits of detection of 0.03 µg L-1. The maximum SA residue recovered from sample tissues by using MMIPs was 5.48 µg g-1. MMIP-coupled UPLC-MS/MS quantification of SAs is an accurate and repeatable method for the monitoring of SA accumulation in mouse tissue samples. It also provides an effective strategy for the tracking and quantification of drugs in other biological samples.

Preparation of monodisperse, restricted-access, media-molecularly imprinted polymers using bi-functional monomers for solid-phase extraction of sarafloxacin from complex samples.

Monodisperse restricted-access media bi-functional monomers with molecularly imprinted polymers (RAM-MIPs) were constructed using surface-initiated atom transfer radical polymerization. They were used as solid-phase extraction (SPE) adsorbents to enrich sarafloxacin (SAR) residues from egg samples, and influences on their performance were investigated. Optimum synthesis of RAM-MIPs was achieved by combining a bi-functional monomer (4-vinylpyridine-co-methacrylic acid, 1:3) with an 8:1:32:8 ratio of a template molecule, cross-linker, and restricted-access functional monomer. The SAR imprinting factor of RAM-MIPs was 6.05 and the selectivity coefficient between SAR and other fluoroquinolones was 1.86-2.64. Compared with traditional MIPs, the RAM-MIPs showed better SAR enrichment and selectivity during extraction of a complex protein-containing solution. Empty SPE cartridges were filled with RAM-MIP microspheres as SPE adsorbents. The limit of quantitation for SAR was 4.23 ng g-1 (signal-to-noise ratio = 10) and the mean SAR recovery from spiked egg samples was 94.0-101.3%. Intra-day and inter-day relative standard deviations were 1.1-9% and 1.5-3.3%, respectively.

Computational design and synthesis of molecular imprinted polymers for selective solid phase extraction of sulfonylurea herbicides.

A high-efficiency approach for the synthesis of molecularly imprinted polymers has been developed and further for the solid-phase extraction of sulfonylurea herbicides in food samples. Molecular simulation approach combined chemometric selected metsulfuron-methyl (MSM) and 2-trifluoromethyl acrylic acid (TFMAA) as the template and the monomer to synthesize the molecularly imprinted polymers (MIPs). Experimental validation confirmed that the MSM-imprinted polymers showed a higher selectivity and affinity to sulfonylurea herbicides. The optimized molecularly imprinted solid-phase extraction (MISPE) conditions, including loading, washing, and eluting conditions, were established. The developed MISPE technology combined HPLC-MSMS was successfully used for the determination of sulfonylurea herbicides in foods. Compared with commercial SPE columns, MISPE showed high affinity, excellent selectivity and low matrix effect. The recoveries of sulfonylurea herbicides spiked in four matrices were between 86.4% and 100.2%, with the relative standard deviations (RSD) in the range of 0.9%-10.5%.

A hollow visible-light-responsive surface molecularly imprinted polymer for the detection of chlorpyrifos in vegetables and fruits.

A visible-light-responsive azobenzene derivative, 3,5-dichloro-4-((2,6-dichloro-4-(methacryloyloxy)phenyl)diazenyl)benzoic acid, was synthesized and used as the functional monomer to fabricate a visible-light-responsive core-shell structured surface molecularly imprinted polymer (PS-co-PMAA@VSMIP). After removal of the sacrificial PS-co-PMAA core, a hollow structured surface molecularly imprinted polymer (HVSMIP) was obtained. Both the PS-co-PMAA@VSMIP and HVSMIP were used for the detection of chlorpyrifos, a moderately toxic organophosphate pesticide. They exhibited good visible-light-responsive properties (550 nm for trans→cis and 440 nm for cis→trans isomerization for an azobenzene chromophore) in ethanol/water (9:1, v/v). Compared with the PS-co-PMAA@VSMIP, the HVSMIP had a larger surface area, pore volume, binding capacity, imprinting effect, maximum chemical binding capacity, dissociation constant, and photo-isomerization rate. The HVSMIP was applied to detect trace chlorpyrifos in fruit and vegetable samples. This was achieved by measuring the trans→cis rate constant of the HVSMIP in the sample solution, with good recoveries, low relative standard deviations, and a low detection limit.