Cryo-EM structures of full-length Tetrahymena ribozyme at 3.1 Å resolution.

Single-particle cryogenic electron microscopy (cryo-EM) has become a standard technique for determining protein structures at atomic resolution1-3. However, cryo-EM studies of protein-free RNA are in their early days. The Tetrahymena thermophila group I self-splicing intron was the first ribozyme to be discovered and has been a prominent model system for the study of RNA catalysis and structure-function relationships4, but its full structure remains unknown. Here we report cryo-EM structures of the full-length Tetrahymena ribozyme in substrate-free and bound states at a resolution of 3.1 Å. Newly resolved peripheral regions form two coaxially stacked helices; these are interconnected by two kissing loop pseudoknots that wrap around the catalytic core and include two previously unforeseen (to our knowledge) tertiary interactions. The global architecture is nearly identical in both states; only the internal guide sequence and guanosine binding site undergo a large conformational change and a localized shift, respectively, upon binding of RNA substrates. These results provide a long-sought structural view of a paradigmatic RNA enzyme and signal a new era for the cryo-EM-based study of structure-function relationships in ribozymes.

Snapshots of the first-step self-splicing of Tetrahymena ribozyme revealed by cryo-EM.

Tetrahymena ribozyme is a group I intron, whose self-splicing is the result of two sequential ester-transfer reactions. To understand how it facilitates catalysis in the first self-splicing reaction, we used cryogenic electron microscopy (cryo-EM) to resolve the structures of L-16 Tetrahymena ribozyme complexed with a 11-nucleotide 5'-splice site analog substrate. Four conformations were achieved to 4.14, 3.18, 3.09 and 2.98 Å resolutions, respectively, corresponding to different splicing intermediates during the first enzymatic reaction. Comparison of these structures reveals structural alterations, including large conformational changes in IGS/IGSext (P1-P1ext duplex) and J5/4, as well as subtle local rearrangements in the G-binding site. These structural changes are required for the enzymatic activity of the Tetrahymena ribozyme. Our study demonstrates the ability of cryo-EM to capture dynamic RNA structural changes, ushering in a new era in the analysis of RNA structure-function by cryo-EM.

A divalent cation-dependent variant of the glmS ribozyme with stringent Ca2+ selectivity co-opts a preexisting nonspecific metal ion-binding site.

Ribozymes use divalent cations for structural stabilization, as catalytic cofactors, or both. Because of the prominent role of Ca2+ in intracellular signaling, engineered ribozymes with stringent Ca2+ selectivity would be important in biotechnology. The wild-type glmS ribozyme (glmSWT) requires glucosamine-6-phosphate (GlcN6P) as a catalytic cofactor. Previously, a glmS ribozyme variant with three adenosine mutations (glmSAAA) was identified, which dispenses with GlcN6P and instead uses, with little selectivity, divalent cations as cofactors for site-specific RNA cleavage. We now report a Ca2+-specific ribozyme (glmSCa) evolved from glmSAAA that is >10,000 times more active in Ca2+ than Mg2+, is inactive in even 100 mM Mg2+, and is not responsive to GlcN6P. This stringent selectivity, reminiscent of the protein nuclease from Staphylococcus, allows rapid and selective ribozyme inactivation using a Ca2+ chelator such as EGTA. Because glmSCa functions in physiologically relevant Ca2+ concentrations, it can form the basis for intracellular sensors that couple Ca2+ levels to RNA cleavage. Biochemical analysis of glmSCa reveals that it has co-opted for selective Ca2+ binding a nonspecific cation-binding site responsible for structural stabilization in glmSWT and glmSAAA Fine-tuning of the selectivity of the cation site allows repurposing of this preexisting molecular feature.

Structure determination of group II introns.

Group II introns are self-splicing catalytic RNAs that are able to excise themselves from pre-mRNAs using a mechanism identical to that utilized by the spliceosome. Both structural and phylogenetic data support the hypothesis that group II introns and the spliceosome share a common ancestor. Structures of group II introns have given insight into the active site required for the catalysis of RNA splicing. This review outlines crucial aspects of the structure determination of group II introns such as sample preparation and data processing. Given that group II introns are large RNAs that must be synthesized through in vitro transcription, there are special considerations that must be taken into account in terms of purification and crystallization, as compared to the isolation of large intact ribonucleoprotein complexes such as the ribosome. We specifically focus on the methodology used to determine the structure of the eukaryotic group II intron lariat from the brown algae Pylaiella littoralis. The techniques described in this review can also be applied for the structure determination of other large RNAs.

The Hammerhead Ribozyme: A Long History for a Short RNA.

Small nucleolytic ribozymes are a family of naturally occurring RNA motifs that catalyse a self-transesterification reaction in a highly sequence-specific manner. The hammerhead ribozyme was the first reported and the most extensively studied member of this family. However, and despite intense biochemical and structural research for three decades since its discovery, the history of this model ribozyme seems to be far from finished. The hammerhead ribozyme has been regarded as a biological oddity typical of small circular RNA pathogens of plants. More recently, numerous and new variations of this ribozyme have been found to inhabit the genomes of organisms from all life kingdoms, although their precise biological functions are not yet well understood.

Atomic level architecture of group I introns revealed.

Twenty-two years after their discovery as ribozymes, the self-splicing group I introns are finally disclosing their architecture at the atomic level. The crystal structures of three group I introns solved at moderately high resolution (3.1-3.8A) reveal a remarkably conserved catalytic core bound to the metal ions required for activity. The structure of the core is stabilized by an intron-specific set of long-range interactions that involves peripheral elements. Group I intron structures thus provide much awaited and extremely valuable snapshots of how these ribozymes coordinate substrate binding and catalysis.

Design principles for ligand-sensing, conformation-switching ribozymes.

Nucleic acid sensor elements are proving increasingly useful in biotechnology and biomedical applications. A number of ligand-sensing, conformational-switching ribozymes (also known as allosteric ribozymes or aptazymes) have been generated by some combination of directed evolution or rational design. Such sensor elements typically fuse a molecular recognition domain (aptamer) with a catalytic signal generator (ribozyme). Although the rational design of aptazymes has begun to be explored, the relationships between the thermodynamics of aptazyme conformational changes and aptazyme performance in vitro and in vivo have not been examined in a quantitative framework. We have therefore developed a quantitative and predictive model for aptazymes as biosensors in vitro and as riboswitches in vivo. In the process, we have identified key relationships (or dimensionless parameters) that dictate aptazyme performance, and in consequence, established equations for precisely engineering aptazyme function. In particular, our analysis quantifies the intrinsic trade-off between ligand sensitivity and the dynamic range of activity. We were also able to determine how in vivo parameters, such as mRNA degradation rates, impact the design and function of aptazymes when used as riboswitches. Using this theoretical framework we were able to achieve quantitative agreement between our models and published data. In consequence, we are able to suggest experimental guidelines for quantitatively predicting the performance of aptazyme-based riboswitches. By identifying factors that limit the performance of previously published systems we were able to generate immediately testable hypotheses for their improvement. The robust theoretical framework and identified optimization parameters should now enable the precision design of aptazymes for biotechnological and clinical applications.

Coaxially stacked RNA helices in the catalytic center of the Tetrahymena ribozyme.

Coaxial stacking of helical elements is a determinant of three-dimensional structure in RNA. In the catalytic center of the Tetrahymena group I intron, helices P4 and P6 are part of a tertiary structural domain that folds independently of the remainder of the intron. When P4 and P6 were fused with a phosphodiester linkage, the resulting RNA retained the detailed tertiary interactions characteristic of the native P4-P6 domain and even required lower magnesium ion concentrations for folding. These results indicate that P4 and P6 are coaxial in the P4-P6 domain and, therefore, in the native ribozyme. Helix fusion could provide a general method for identifying pairs of coaxially stacked helices in biological RNA molecules.

Boltzmann probability of RNA structural neighbors and riboswitch detection.

MOTIVATION: We describe algorithms implemented in a new software package, RNAbor, to investigate structures in a neighborhood of an input secondary structure S of an RNA sequence s. The input structure could be the minimum free energy structure, the secondary structure obtained by analysis of the X-ray structure or by comparative sequence analysis, or an arbitrary intermediate structure. RESULTS: A secondary structure T of s is called a delta-neighbor of S if T and S differ by exactly delta base pairs. RNAbor computes the number (N(delta)), the Boltzmann partition function (Z(delta)) and the minimum free energy (MFE(delta)) and corresponding structure over the collection of all delta-neighbors of S. This computation is done simultaneously for all delta < or = m, in run time O (mn3) and memory O(mn2), where n is the sequence length. We apply RNAbor for the detection of possible RNA conformational switches, and compare RNAbor with the switch detection method paRNAss. We also provide examples of how RNAbor can at times improve the accuracy of secondary structure prediction. AVAILABILITY: http://bioinformatics.bc.edu/clotelab/RNAbor/. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

Crystal structures of a group II intron lariat primed for reverse splicing.

The 2'-5' branch of nuclear premessenger introns is believed to have been inherited from self-splicing group II introns, which are retrotransposons of bacterial origin. Our crystal structures at 3.4 and 3.5 angstrom of an excised group II intron in branched ("lariat") form show that the 2'-5' branch organizes a network of active-site tertiary interactions that position the intron terminal 3'-hydroxyl group into a configuration poised to initiate reverse splicing, the first step in retrotransposition. Moreover, the branchpoint and flanking helices must undergo a base-pairing switch after branch formation. A group II-based model of the active site of the nuclear splicing machinery (the spliceosome) is proposed. The crucial role of the lariat conformation in active-site assembly and catalysis explains its prevalence in modern splicing.

Structure of a group II intron in complex with its reverse transcriptase.

Bacterial group II introns are large catalytic RNAs related to nuclear spliceosomal introns and eukaryotic retrotransposons. They self-splice, yielding mature RNA, and integrate into DNA as retroelements. A fully active group II intron forms a ribonucleoprotein complex comprising the intron ribozyme and an intron-encoded protein that performs multiple activities including reverse transcription, in which intron RNA is copied into the DNA target. Here we report cryo-EM structures of an endogenously spliced Lactococcus lactis group IIA intron in its ribonucleoprotein complex form at 3.8-Å resolution and in its protein-depleted form at 4.5-Å resolution, revealing functional coordination of the intron RNA with the protein. Remarkably, the protein structure reveals a close relationship between the reverse transcriptase catalytic domain and telomerase, whereas the active splicing center resembles the spliceosomal Prp8 protein. These extraordinary similarities hint at intricate ancestral relationships and provide new insights into splicing and retromobility.

Visualization of a tertiary structural domain of the Tetrahymena group I intron by electron microscopy.

The P4-P6 domain RNA of the group I intron of Tetrahymena thermophila has previously been shown by chemical probing to be an independently folding domain of the intron's tertiary structure. To directly visualize this tertiary structure, the P4-P6 domain and two folding defective mutants were prepared for high-resolution electron microscopy using tungsten shadowcasting. In the presence of Mg2+, the P4-P6 domain predominantly consists of compact molecules, while the two mutant RNAs are nearly all rod-like molecules. The measured length of the rod-like molecules is 64 (+/- 6) bp, which agrees closely with the length expected for molecules containing secondary structure only. In the absence of Mg2+, the P4-P6 domain contains threefold or tenfold fewer compact structures (depending on the mounting procedures) than in the presence of Mg2+. These results provide direct evidence for the overall shape of the tertiary structure proposed on the basis of biochemical experiment, and they confirm the Mg2+ dependence of tertiary folding. An equilibrium between the extended (rod-like) and the compact structures is suggested, with the concentration of bound Mg2+ and different mounting methods influencing the direction of the equilibrium. The entire group I ribozyme (L-21 Sca I RNA) was also examined by electron microscopy in the presence of Mg2+, and was revealed to have a compact shape. These studies present a direct demonstration of long-range interactions in a catalytic RNA molecule.

Comparative enzymology and structural biology of RNA self-cleavage.

Self-cleaving hammerhead, hairpin, hepatitis delta virus, and glmS ribozymes comprise a family of small catalytic RNA motifs that catalyze the same reversible phosphodiester cleavage reaction, but each motif adopts a unique structure and displays a unique array of biochemical properties. Recent structural, biochemical, and biophysical studies of these self-cleaving RNAs have begun to reveal how active site nucleotides exploit general acid-base catalysis, electrostatic stabilization, substrate destabilization, and positioning and orientation to reduce the free energy barrier to catalysis. Insights into the variety of catalytic strategies available to these model RNA enzymes are likely to have important implications for understanding more complex RNA-catalyzed reactions fundamental to RNA processing and protein synthesis.

Atomic force microscopy and anodic voltammetry characterization of a 49-mer diels-alderase ribozyme.

Atomic force microscopy and differential pulse voltammetry were used to characterize the interaction of small highly structured ribozymes with two carbon electrode surfaces. The ribozymes spontaneously self-assemble in two-dimensional networks that cover the entire HOPG surface uniformly. The full-length ribozyme was adsorbed to a lesser extent than a truncated RNA sequence, presumably due to the formation of a more compact overall structure. All four nucleobases composing the ribozyme could be detected by anodic voltammetry on glassy carbon electrodes, and no signals corresponding to free nucleobases were found, indicating the integrity of the ribozyme molecules. Mg2+ cations significantly reduced the adsorption of ribozymes to the surfaces, in agreement with the stabilization of this ribozyme's compact, stable, and tightly folded tertiary structure by Mg2+ ions that could prevent the hydrophobic bases from interacting with the HOPG surface. Treatment with Pb2+ ions, on the other hand, resulted in an increased adsorption of the RNA due to well-known hydrolytic cleavage. The observed dependence of anodic peak currents on different folding states of RNA may provide an attractive method to electrochemically monitor structural changes associated with RNA folding, binding, and catalysis.

Novel guanosine requirement for catalysis by the hairpin ribozyme.

THERE is much interest in the development of 'designer ribozymes' to target destruction of RNAs in vitro and in vivo. Engineering of ribozymes with novel specificities requires detailed knowledge of the ribozyme-substrate interaction, and a rigorous evaluation of sequence specificity. The hairpin ribozyme catalyses an efficient and reversible site-specific cleavage reaction. We have used mutagenesis and in vitro selection strategies to show that RNA cleavage and ligation has an absolute requirement for guanosine immediately 3' to the cleavage-ligation site. This G is not required for efficient substrate binding, rather, its 2-amino group is an essential component of the active site required for catalysis.

Evidence that the guanosine substrate of the Tetrahymena ribozyme is bound in the anti conformation and that N7 contributes to binding.

The group I self-splicing introns are RNA enzymes that catalyze phosphodiester-exchange reactions. These ribozymes have a highly specific binding site for guanosine, a substrate for the first self-splicing reaction (Bass & Cech, 1984). The binding site for guanosine has been localized to a specific region of the ribozyme (Michel et al., 1989), but the conformation of the bound guanosine substrate remains unknown. Most analogs of guanosine with substituents at C8 have a preference for the syn conformation; however, some C8-substituted analogs have the potential to form a hydrogen bond between the C8 substituent and the 5'-hydroxyl that would stabilize the anti conformation; we have found that analogs with the potential to form such a hydrogen bond are more active substrates than those that cannot form such a hydrogen bond. These observations led us to test 8-5'-O-cycloguanosine, which is locked in the anti conformation, and 8-(alpha-hydroxyisopropyl)guanosine, which is locked in the syn conformation; the former is active as a substrate, while the latter is inactive. These results strongly suggest that guanosine is bound to the ribozyme in the anti conformation and provide an additional constraint on structural models of this RNA enzyme. We have also examined a series of N7-substituted guanosine analogs; this position had previously been assumed to be unimportant for substrate binding since 7-methylguanosine is an excellent substrate. However, we have found that 7-deazaguanosine and 7-methyl-7-deazaguanosine are less active substrates than guanosine. We discuss several models for the role of N7 in guanosine binding.

mRNA localization signals can enhance the intracellular effectiveness of hammerhead ribozymes.

Subcellular localization signals for several mRNAs are positioned in their 3' untranslated regions (UTR). We have utilized the human alpha- and beta-actin 3' UTRs as signals for colocalizing hammerhead ribozymes with a lacZtarget mRNA. Ribozyme and target genes containing matched or unmatched 3' UTRs were cotransfected into 12-day-old chicken embryonic myoblast and fibroblast (CEMF) cultures and assayed by in situ hybridization (ISH) using a dual label, antibody sandwich procedure, and dual fluorescence microscopy to monitor intracellular colocalization. Beta-galactosidase localization in transfectants was visualized by incubation with X-gal and also quantitated by an o-nitrophenyl beta-D-galactopyranoside (ONPG) assay. We found that the percentage of colocalization using the matched alpha- or beta-actin 3' UTR (alpha-alpha or beta-beta) was enhanced approximately threefold relative to unmatched 3' UTRs. The increase in ribozyme-mediated inhibition of beta-galactosidase activity observed when matched 3' UTRs were used was consistent with the observed percentage of colocalization. These results represent the first direct demonstration that mRNA localization signals (zipcodes) can be utilized to enhance intracellular ribozyme efficacy.