Binary and Halide-free Catalyst Systems Based on Al/Ga/In Aminopyridylbisphenolate Complexes for the Cycloaddition of Epoxides and CO2.

Group 13 complexes bearing an aminopyridylbisphenol ligand have been prepared [ML-X; L = ligand, M = Al (X = Cl and Br), Ga (X = Cl, Br, and I), or In (X = Cl)]. The structures of the complexes containing the chloride ligand (ML-Cl; M = Al, Ga, and In) have been directly compared through an X-ray crystallography study, with differences in the monomeric or dimeric nature of their structures observed. All of the complexes obtained have been studied as potential catalysts for the synthesis of cyclic carbonates from epoxides and CO2. It has been found that the indium complex, as part of a traditional binary catalyst system (catalyst + tetra-butylammonium halide cocatalyst), displays the highest catalytic activity and is active under rather mild reaction conditions (balloon pressure of CO2). Meanwhile, it has been found that the GaL-I complex is a competent single-component catalyst (no need for addition of a cocatalyst) at more elevated reaction temperatures and pressures. A full substrate scope has been performed with both developed catalyst systems to demonstrate their applicability. In addition to the experimental results, a density functional theory study was performed on both catalyst systems. These results explain both why the indium catalyst is the most active under binary catalyst system conditions and how the gallium catalyst with an iodide (GaL-I) is able to act as a single-component catalyst in contrast to the indium-based complex.

Synthesis and applications of the sulfur containing analogues of cyclic carbonates.

Cyclic thiocarbonates are the sulfur containing analogues of the well-studied cyclic carbonates and are relatively poorly explored despite their potential applications and intriguing reactivities. To date, application of these organosulfur compounds has included their use as monomers for polythiocarbonate synthesis (their ring-opening is more readily achieved and more selective than the corresponding cyclic carbonates) and as reactive intermediates for the preparation of a range of higher-value sulfur containing compounds. Despite these uses, the synthesis of these compounds is far less explored and developed than their non-sulfur analogues. Here, we provide an overview of the state-of-the-art, both recent and historical, for the synthesis of a range of cyclic mono-, di- and tri-thiocarbonates (both five and six-membered rings), with selected examples of their reported applications also highlighted.

Chemoselective cycloadditions to epoxide derivatives of erucic acid with CO2 and CS2: controlled access to value-added bio-derived compounds.

The potential for application of bio-derived molecules in our everyday lives is attracting vast interest as attention moves towards development of a truly circular and sustainable economy. Whilst a large number of molecules are naturally available and contain a variety of functional groups, few of these compounds are able to be immediately transferred to applications where they can directly replace established oil-derived species. This issue presents both a challenge and an opportunity for the synthetic chemistry community. This study demonstrates how erucic acid, a molecule containing an olefin and a carboxylic acid, which is readily available from commonly cultivated rapeseed oils, can be used as a platform to be chemoselectively converted into a range of value-added compounds using established and high yielding synthetic procedures. In particular, the work showcases approaches towards the chemoselective (and in cases regioselective) oxidation with m-CPBA and incorporation of cyclic carbonate and cyclic dithiocarbonate functionalities which have potential to be employed in a range of applications. Expedient routes to unusual derivatives containing both cyclic carbonate and cyclic dithiocarbonates are also presented taking advantage of the distinct reactivities of the two different epoxides in the intermediate compounds. This work also provides a rare example of the synthesis of internal cyclic dithiocarbonates. These new products have potential to be applied as monomers in the growing field of bio-based non-isocyanate polyurethane synthesis.

Postfunctionalization of Tris(pyridyl) Aluminate Ligands: Chirality, Coordination, and Supramolecular Chemistry.

Postfunctionalization of the aluminate anion [EtAl(6-Me-2-py)3 ]- (1) (2-py=2-pyridyl) with alkoxide ligands can be achieved by the selective reactions of the lithium salt 1 Li with alcohols in the appropriate stoichiometry. This method can be used to introduce 3- and 4-py functionality in the form of 3- and 4-alkoxymethylpyridyl groups, while maintaining the integrity of the aluminate framework, thereby giving entry to new supramolecular chemistry. Chirality can be introduced either by using a chiral alcohol as a reactant or by the stepwise reaction of 1 Li with two different nonchiral alcohols. The latter route has allowed the synthesis of a rare example of a chiral-at-aluminium aluminate.

Copper Complexes in the Promotion of Aldol Addition to Pyridine-2-carboxaldehyde: Synthesis of Homo- and Heteroleptic Complexes and Stereoselective Double Aldol Addition.

CuCl2·2H2O and Cu(ClO4)2·6H2O are able to promote aldol addition of pyridine-2-carboxaldehyde (pyca) with acetone, acetophenone, or cyclohexenone under neutral and mild conditions. The general and simple one-pot procedure for the aldol addition to Cu(II) complexes accesses novel Cu complexes with a large variety of different structural motifs, from which the aldol-addition ligand can be liberated by treatment with NH3. Neutral heteroleptic complexes in which the ligand acts as bidentate, or homoleptic cationic complexes in which the ligand acts as tridentate can be obtained depending on the copper salt used. The key step in these reactions is the coordination of pyca to copper, which increases the electrophilic character of the aldehyde, with Cu(ClO4)2 leading to a higher degree of activation than CuCl2, as predicted by DFT calculations. A regio- and stereoselective double aldol addition of pyca in the reaction of Cu(ClO4)2·6H2O with acetone leads to the formation of a dimer copper complex in which the novel double aldol addition product acts as a pentadentate ligand. A possible mechanism is discussed. The work is supported by extensive crystallographic studies.

Synthesis and reactivity of air stable Ni(II) complexes with isocyanides and dialkyldithiophosphate ligands: acyclic diaminocarbene formation.

A library of new neutral and cationic Ni(II) complexes containing isocyanide ligands and mono- or dialkyl-dithiophosphate have been easily prepared and fully characterized. The synthesis of the neutral complexes unfolds through the alkyl transfer from one alkyldithiophosphate leaving group coordinated to the Ni(II) complex. The alkyl transfer is controlled by steric factors and is highly solvent-dependent. These complexes shown to constitute excellent precursors to obtain new families of air stable Ni(II)-based acyclic diaminocarbene complexes (Ni(II)-ADCs) by nucleophilic attack with various alkyl-substituted amines. Remarkably, the ADC is only produced at one of the isocyanide ligands, keeping the other isocyanide unreacted. This was subsequently exploited to prepare the unprecedented neutral and cationic dinuclear Ni(II) complexes containing a bridging bis-carbene ligand using piperazine.

Group 13 salphen compounds (In, Ga and Al): a comparison of their structural features and activities as catalysts for cyclic carbonate synthesis.

Many complexes based on group 13 elements have been successfully applied as catalysts for the synthesis of cyclic carbonates from epoxides and CO2 and to date these have provided some of the most active catalysts developed. It is notable that most reports have focused on the use of aluminium-based compounds likely because of the well-established Lewis acidity of this element and its cost. In comparison, relatively little attention has been paid to the development of catalysts based on the heavier group 13 elements, despite their known Lewis acidic properties. This study describes the synthesis of aluminium, gallium and indium compounds supported by a readily prepared salphen ligand and explores both their comparative structures and also their potential as catalysts for the synthesis of cyclic carbonates. In addition, the halide ligand which forms a key part of the compound has been systematically varied and the effect of this change on the structure and catalytic activity is also discussed. It is demonstrated that the indium compounds are actually, and unexpectedly, the most active for cyclic carbonate synthesis, despite their lower Lewis acidity when compared to their aluminium congeners. The experimental observations from this work are fully supported by a Density Functional Theory (DFT) study, which provides important insights into the reasons as to why the indium catalyst with bromide, [InBr(salphen)], is most active.

Copper complexes for the promotion of iminopyridine ligands derived from ß-alanine and self-aldol additions: relaxivity and cytotoxic properties.

In the study presented herein, we explore the ability of copper complexes with coordinated pyridine-2-carboxaldehyde (pyca) or 2-acetylpyridine (acepy) ligands to promote the addition of amines (Schiff condensation) and other nucleophiles such as alcohols (hemiacetal formation). Distinct reactivity patterns are observed: unlike pyca complexes, acepy copper complexes can promote self-aldol addition. The introduction of a flexible chain via Schiff condensation with ß-alanine allows the possibility of chelate ring ring-opening processes mediated by pH. Further derivatization of the complex [CuCl(py-2-C(H)[double bond, length as m-dash]NCH2CH2COO)] is possible by replacing its chloride ligand with different pseudohalogens (N3-, NCO- and NCS-). In addition to the change in their magnetism, which correlates with their solid-state structures, more unexpected effects in their cytotoxicity and relaxitivities are observed, which determines their possibility to be used as MRI contrast agents. The replacement of a chloride by another pseudohalogen, although a simple strategy, can be used to critically change the cytotoxicity of the Schiff base copper(ii) complex and its selectivity towards specific cell lines.

Affinity modulation of photoresponsive hosts for fullerenes: light-gated corannulene tweezers.

Six azobenzene derivatives bearing polyaromatic fragments have been prepared and their reversible photoisomerization has been assessed. Corannulene-functionalized molecules have demonstrated excellent switchable hosting abilities towards fullerenes in which an interesting range of affinities has been found. The success of this design relies upon the reversible formation and destruction of tweezer-like structures.

Complexes with 3-(pyridin-2-yl)imidazo[1,5-a]pyridine ligands by spontaneous dimerization of pyridine-2-carboxaldehyde within the coordination sphere of manganese(II) in a one-pot reaction.

Condensation of two molecules of pyridine-2-carboxaldehyde (pyca), in the presence of MnCl(2) and ammonium diethyldithiophosphate, produced, in a one-pot reaction, Mn(II) complexes containing 3-(pyridin-2-yl)imidazo[1,5-a]pyridines as κ(2)(N,N) chelate ligands which could be easily separated from the metal, this being a convenient way to pyridyl-aza-indolizine heterocycles.