ABSTRACT
This study focuses on two main aspects: developing a novel cost-effective electrode material and power production from domestic wastewater using three different mediators. Methylene blue (MB), neutral red (NR) and 2-hydroxy-1,4-naphthoquinone (HNQ) were selected as electrode mediators with different concentrations. A tin-coated copper mesh electrode was tested as anode electrode. Maximum power density of the microbial fuel cell (MFC) with 300 µM MB was 636 mW/m². Optimal mediator concentrations with respect to the achieved maximum power output for MB, NR and HNQ were 300 µM, 200 µM and 50 µM, respectively. The results demonstrate that tin-coated copper mesh showed a higher biocompatibility and electrical conductivity.
Subject(s)
Bioelectric Energy Sources , Methylene Blue/chemistry , Naphthoquinones/chemistry , ElectrodesABSTRACT
The purpose of this study was to assess atrazine mineralization in surface and subsurface samples retrieved from vertical cores of agricultural soils from two farm sites in Ohio. The Defiance site (NW-Ohio) was on soybean-corn rotation and Piketon (S-Ohio) was on continuous corn cultivation. Both sites had a history of atrazine application for at least a couple of decades. The clay fraction increased at the Defiance site and the organic matter and total N content decreased with depth at both sites. Mineralization of atrazine was assessed by measurement of (14)CO2 during incubation of soil samples with [U-ring-(14)C]-atrazine. Abiotic mineralization was negligible in all soil samples. Aerobic mineralization rate constants declined and the corresponding half-lives increased with depth at the Defiance site. Anaerobic mineralization (supplemented with nitrate) was mostly below the detection at the Defiance site. In Piketon samples, the kinetic parameters of aerobic and anaerobic biomineralization of atrazine displayed considerable scatter among replicate cores and duplicate biometers. In general, this study concludes that data especially for anaerobic biomineralization of atrazine can be more variable as compared to aerobic conditions and cannot be extrapolated from one agricultural site to another.
Subject(s)
Atrazine/analysis , Atrazine/metabolism , Herbicides/analysis , Herbicides/metabolism , Soil Pollutants/analysis , Soil Pollutants/metabolism , Soil/chemistry , Agriculture , Biodegradation, Environmental , Kinetics , Ohio , Soil Microbiology , Zea maysABSTRACT
This study aims at evaluating the performance of a two-chambered continuously fed microbial fuel cell with new Ti-TiO2 electrodes for bioelectricity generation from young landfill leachate at varying strength of wastewater (1-50 COD g/L) and hydraulic retention time (HRT, 0.25-2 days). The COD removal efficiency in the MFC increased with time and reached 45 % at full-strength leachate (50 g/L COD) feeding. The current generation increased with increasing leachate strength and decreasing HRT up to organic loading rate of 100 g COD/L/day. The maximum current density throughout the study was 11 A/m² at HRT of 0.5 day and organic loading rate of 67 g COD/L/day. Coulombic efficiency (CE) decreased from 57 % at feed COD concentration of 1 g/L to less than 1 % when feed COD concentration was 50 g/L. Increase in OLR resulted in increase in power output but decrease in CE.
Subject(s)
Bioelectric Energy Sources , Waste Disposal, Fluid/methods , Biodegradation, Environmental , Bioengineering , Biological Oxygen Demand Analysis , Electricity , Electrodes , Refuse Disposal , TitaniumABSTRACT
The aim of this study was to investigate the potential for elemental sulphur recovery from sulphurous solutions under aerobic and anoxic conditions by haloalkalophilic Thioalkalivibrio denitrificans at 0.8-19.6â g S2O32--S L-1 and 0.2-0.58â g NO2 L-1, respectively. The experiments were conducted as batch assays with haloalkaline (pH 10 and ≥ 14â g Na+ L-1) thiosulphate solution. Aerobically, the highest biotransformation rate of thiosulphate obtained was 0.03â h-1 at 8.5â g L S2O32--S. Based on Monod model, the maximum substrate utilisation rate (qm) was 0.024â h-1 with half saturation constant (Ks) 0.42â g S2O32--S L-1 at initial [S2O32--S] of 14â g L-1. S0 accumulated at [S2O32--S] ≥ 1.5â g L-1 (10% yield at initial 9.5â g S2O32--S L-1) and the highest S0 yield estimated with the model was 61% with initial [S2O32--S] of 16.5â g L-1. Anoxically, the maximum nitrite removal rate based on Monod modelling was 0.011â h-1 with Ks = 0.84â g NO2- L-1. Aerobically and anoxically the maximum specific growth rates (µm) were 0.046 and 0.022â h-1, respectively. In summary, high-rate aerobic biotransformation kinetics of thiosulphate were demonstrated, whereas the rates were slower and no S0 accumulated under anoxic conditions. Thus, future developments of biotechnical applications for the recovery of S0 from haloalkaline streams from the process industry should focus on aerobic treatment.HighlightsHaloalkaline S2O32- biotransformations kinetics by Thioalkalivibrio denitrificansAerobic thiosulphate-S bioconversion up to 0.024 h-1 with Ks = 0.42 g S2O32--S L-110% S0 yield with initial 9.5 g S2O32--S L-1 in aerobic conditionAnoxic NO2 removal up to 0.01 h-1 with Ks = 0.84 g NO2- L-1.
Subject(s)
Ectothiorhodospiraceae , Thiosulfates , Thiosulfates/metabolism , Nitrogen Dioxide , Sulfur , Ectothiorhodospiraceae/metabolismABSTRACT
Electrode materials play a key role in enhancing the electricity generation in the microbial fuel cell (MFC). In this study, a new material (Ti-TiO(2)) was used as an anode electrode and compared with a graphite electrode for electricity generation. Current densities were 476.6 and 31 mA/m(2) for Ti-TiO(2) and graphite electrodes, respectively. The PCR-DGGE analysis of enriched microbial communities from estuary revealed that MFC reactors were dominated by Shewanella haliotis, Enterococcus sp., and Enterobacter sp. Bioelectrochemical kinetic works in the MFC with Ti-TiO(2) electrode revealed that the parameters by non-linear curve fitting with the confidence bounds of 95% gave good fit with the kinetic constants of η (difference between the anode potential and anode potential giving one-half of the maximum current density) = 0.35 V, K (s) (Half-saturation constant) = 2.93 mM and J (max) = 0.39 A/m(2) for T = 298 K and F = 96.485 C/mol-e(-). From the results observed, it is clear that Ti-TiO(2) electrode is a promising candidate for electricity generation in MFC.
Subject(s)
Bioelectric Energy Sources , Electrodes , Base Sequence , DNA Primers , Denaturing Gradient Gel Electrophoresis , Enterobacter/metabolism , Enterococcus/metabolism , Graphite , Kinetics , Polymerase Chain Reaction , Shewanella/metabolismABSTRACT
In this study, the applicability of three modelling approaches was determined in an effort to describe complex relationships between process parameters and to predict the performance of an integrated process, which consisted of a fluidized bed bioreactor for Fe(3+) regeneration and a gravity settler for precipitative iron removal. Self-organizing maps were used to visually evaluate the associations between variables prior to the comparison of two different modelling methods, the multiple regression modelling and artificial neural network (ANN) modelling, for predicting Fe(III) precipitation. With the ANN model, an excellent match between the predicted and measured data was obtained (R (2) = 0.97). The best-fitting regression model also gave a good fit (R (2) = 0.87). This study demonstrates that ANNs and regression models are robust tools for predicting iron precipitation in the integrated process and can thus be used in the management of such systems.
Subject(s)
Bioreactors , Iron/isolation & purification , Algorithms , Bioengineering , Chemical Precipitation , Iron/chemistry , Linear Models , Models, Theoretical , Neural Networks, Computer , Nonlinear Dynamics , Regression AnalysisABSTRACT
One of the most important problems with designing and maintaining a landfill is managing leachate that generated when water passes through the waste. In this study, leachate samples taken from aerobic and anaerobic landfill reactors operated with and without leachate recirculation are investigated in terms of biodegradable and non-biodegradable fractions of COD. The operation time is 600 days for anaerobic reactors and 250 days for aerobic reactors. Results of this study show that while the values of soluble inert COD to total COD in the leachate of aerobic landfill with leachate recirculation and aerobic dry reactors are determined around 40%, this rate was found around 30% in the leachate of anaerobic landfill with leachate recirculation and traditional landfill reactors. The reason for this difference is that the aerobic reactors generated much more microbial products. Because of this condition, it can be concluded that total inert COD/total COD ratios of the aerobic reactors were 60%, whereas those of anaerobic reactors were 50%. This study is important for modeling, design, and operation of landfill leachate treatment systems and determination of discharge limits.
Subject(s)
Bioreactors , Oxygen/chemistry , Refuse Disposal , Water Pollutants, Chemical/analysis , Aerobiosis , Anaerobiosis , Biodegradation, Environmental , Oxygen/metabolism , Particulate Matter/analysis , Pilot ProjectsABSTRACT
Acetate utilization in sulfidogenic fluidized-bed reactors (FBRs) was investigated for the treatment of iron containing wastewater at low (8 degrees C) and high (65 degrees C) temperatures. The FBRs operated at low and high temperatures were inoculated with cultures of sulfate-reducing bacteria (SRB) originally enriched from arctic and hot mining environments, respectively. Acetate was not utilized as a carbon and electron source for SRB at 8 degrees C. With ethanol, hydrogen sulfide was produced from ethanol to acetate oxidation, which precipitated the iron. Then, several attempts were made to obtain acetate oxidation at 8 degrees C. Inoculation of two different low temperature enrichments and operating the FBR for a long period of time (321 days) did not result in enrichment of acetate oxidizing SRB. Due to the absence of acetate oxidation at 8 degrees C, external alkalinity addition was required to keep the pH neutral. At 65 degrees C, average acetate and sulfate removals were 52+/-12% and 24+/-8% at 670 mg/Ld acetate and 1500 mg/Ld sulfate loadings, respectively. The produced alkalinity from acetate oxidation increased the pH from 6.4 to around 7.5 and electron flow to sulfate reduction averaged 65%. Denaturing gradient gel electrophoresis (DGGE) analysis of 16S rRNA genes showed quite stable SRB community at 8 degrees C, whereas, at 65 degrees C SRB community was dynamic. In the FBRs, Desulfomicrobium apsheronum and Desulfosporosinus sp. at 8 degrees C and Desulfotomaculum sp. at 65 degrees C were detected.
Subject(s)
Acetates/metabolism , Bioreactors , Sulfur-Reducing Bacteria/metabolism , Waste Disposal, Fluid/methods , Chemical Precipitation , Ethanol/metabolism , Iron/chemistry , Oxidation-Reduction , RNA, Bacterial/genetics , RNA, Ribosomal, 16S/genetics , Sulfates/metabolism , Sulfur-Reducing Bacteria/genetics , Temperature , Water Pollutants, Chemical/chemistryABSTRACT
In this study, the effect of leachate recirculation on aerobic and anaerobic degradation of municipal solid wastes is determined by four laboratory-scale landfill reactors. The options studied and compared with the traditional anaerobic landfill are: leachate recirculation, landfill aeration, and aeration with leachate recirculation. Leachate quality is regularly monitored by the means of pH, alkalinity, total dissolved solids, conductivity, oxidation-reduction potential, chloride, chemical oxygen demand, ammonia, and total Kjeldahl nitrogen, in addition to generated leachate quantity. Aerobic leachate recirculated landfill appears to be the most effective option in the removal of organic matter and ammonia. The main difference between aerobic recirculated and non-recirculated landfill options is determined at leachate quantity. Recirculation is more effective on anaerobic degradation of solid waste than aerobic degradation. Further studies are going on to determine the optimum operational conditions for aeration and leachate recirculation rates, also with the operational costs of aeration and recirculation.
Subject(s)
Bacteria, Aerobic/metabolism , Bacteria, Anaerobic/metabolism , Bioreactors , Refuse Disposal/methods , Water Pollutants, Chemical/metabolism , Ammonia/analysis , Hydrogen-Ion Concentration , Nitrogen/analysis , Oxidation-Reduction , Water Pollutants, Chemical/chemistryABSTRACT
Leachate and solid waste samples from aerobic and anaerobic simulated landfill reactors operated with and without leachate recirculation were characterized in terms of metals such as Fe, Ca, K, Na, Cd, Cr, Cu, Pb, Ni, and Zn. Metal concentrations of aerobic landfill reactor leachate samples are always below the regulation limits. The higher concentrations in anaerobic landfill leachate samples decreased to regulation limits after the landfill becomes methanogenic. The effect of leachate recirculation is determined in anaerobic landfills more clearly than aerobic landfills. Metal precipitation resulted in a decrease in leachate metal content and an increase in solid waste metal content as expected. Result of the study show that the metal content of landfill leachate samples is not a major concern for both aerobic and anaerobic landfills.
Subject(s)
Metals/analysis , Refuse Disposal , Water Pollutants, Chemical/analysis , Water Purification/methods , Aerobiosis , Anaerobiosis , Pilot Projects , Water Purification/instrumentationABSTRACT
In this study, the potential of activated carbon for phenol adsorption from aqueous solution was studied. Batch kinetics and isotherm studies were carried out to evaluate the effect of contact time, initial concentration, and desorption characteristics of activated carbon. The equilibrium data in aqueous solutions was represented by the isotherm models. Desorption studies to recover the adsorbed phenol from activated carbon performed with NaOH solution. It is necessary to propose a suitable model to gain a better understanding on the mechanism of phenol desorption. For this purpose, pore diffusion and first-order kinetic models were compared. The diffusivity rate (D/r2) and first-order desorption rate (kD) constants were determined as 6.77 x 10(-4) and 3.924 x 10(-4) s(-1), respectively. The two- and three-parameter in the adopted adsorption isotherm models were obtained using a non-linear regression with the help of MATLAB package program. It was determined that best-fitted adsorption isotherm models were determined to be in the order: Langmiur > Toth > Redlich-Peterson > Freundlich isotherms.
Subject(s)
Adsorption , Charcoal , Industrial Waste , Phenol/chemistry , Water Pollutants, Chemical , Water Purification/methods , TemperatureABSTRACT
In this study we monitored for 920 days the sulfate (SO(4)(2-)), chloride (Cl(-)), chemical oxygen demand (COD) and biological oxygen demand (BOD) parameters in leachate produced in two large-scale test cells at the Odayeri Sanitary Landfill, Istanbul, Turkey. We present a mathematical model of these parameter concentrations in leachates of two test cells with one being the control (C1) and the other (C2) leachate recirculation. The relationship between these parameters and refuse age is simulated by a mathematical formula. The unknown constants of the simulation formula are solved by the least squares method, which minimizes the squared total of deviation from the model of the actual data using a MATLAB computer program. A good fit was obtained between the measured data and model simulations. COD concentrations in leachate from C1 and C2 rapidly attained their maximum values of 75 and 70 g/l, respectively, after 1 month of landfilling. BOD to COD ratios are around 0.8 for both test cells during the acidogenic phase; this ratio then decreased to 0.06. A sharp decrease in the concentration of Cl(-) from 14 to 15 g/l was observed after approximately 2 months of operation, followed by a slow decrease. SO(4)(2-) concentrations rapidly reached a maximum value of 2000 mg/l within 45 days; development of anaerobic conditions caused a sharp decrease to around 75 mg/l for C2 and 450 mg/l for C1 after 5 months of operation. The results showed that there appeared to be little improvement in leachate quality by leachate recirculation in terms of COD and BOD values, however, it is determined that the pollution loads more rapidly reached minimum values within the C2 test cell.
Subject(s)
Models, Theoretical , Soil Pollutants , Chlorides/chemistry , Computer Simulation , Oxygen/chemistry , Porosity , Sulfates/chemistry , Time FactorsABSTRACT
We have monitored non-biodegradable soluble COD of leachates derived from two different landfill test cells, which were constructed at Odayeri Sanitary Landfill and operated with (C2) and without (C1) leachate recirculation for 1080 days. Refuse height and the placement area of test cells were 5m and 1250m(2) (25mx50m), respectively. For leachates of both cells, initial inert soluble COD fraction (f(non)) increased from it is initial value of 0.01 to around 0.1 after 300 days of operation. Due to the development of anaerobic conditions, the value showed an increasing trend and the maximum value of 0.4 was reached on day 600. Several suitable models were also fitted to the experimental data on the basis of statistical reasoning. So as to evaluate the goodness of obtained fits, the calculated values of the sum of squares due to error (SSE), R-square, the residual degrees of freedom (DFE), adjusted R-square, and root mean square errors (RMSE) associated with the model results were compared. Logistic model for C1 test cell and Gompertz model for C2 test cell gave the best fits to the experimental data. Moreover, using the fitted model parameters, pollution loads, and BOD/COD ratios in leachates from C1 (control) and C2 (recirculation) cells were estimated and deeply discussed. The results of the study can be satisfactorily used to predict change in the composition of leachate over time, which may help to obtain better effluent quality in biological treatment of leachate.
Subject(s)
Refuse Disposal , Anaerobiosis , Solubility , Substrate SpecificityABSTRACT
The Istanbul composting and recycling plant, constructed in 2001, is one of the few composting plants in Turkey. During test operations of the plant, it was reported that the weight of the oversize materials (OM) above a 80-mm sieve was about 40% of the total incoming waste. They mainly consist of plastic bags that were full of garbage, which resulted in operational problems in the plant. In this paper, the composition of OM was determined and evaluated, particularly to find the economic losses in the plant. It was determined that approximately 58% of the OM transferred to the landfill area due to operational failures and interruptions could be used at the plant with improved operational conditions. Otherwise, the plant would realize an annual economic loss of about 640,800 US$. Compost quality in the plant has been satisfactory, but source separated collection, at least the separation of the wet from the dry fraction, is needed to increase the amount of compost and recovered materials.
Subject(s)
Conservation of Natural Resources/methods , Plants/metabolism , Waste Management/methods , Biodegradation, Environmental , Refuse Disposal/methods , TurkeyABSTRACT
Main objective of this study was to develop a statistical model for easier and faster Biochemical Methane Potential (BMP) prediction of landfilled municipal solid waste by analyzing waste composition of excavated samples from 12 sampling points and three waste depths representing different landfilling ages of closed and active sections of a sanitary landfill site located in Istanbul, Turkey. Results of Principal Component Analysis (PCA) were used as a decision support tool to evaluation and describe the waste composition variables. Four principal component were extracted describing 76% of data set variance. The most effective components were determined as PCB, PO, T, D, W, FM, moisture and BMP for the data set. Multiple Linear Regression (MLR) models were built by original compositional data and transformed data to determine differences. It was observed that even residual plots were better for transformed data the R(2) and Adjusted R(2) values were not improved significantly. The best preliminary BMP prediction models consisted of D, W, T and FM waste fractions for both versions of regressions. Adjusted R(2) values of the raw and transformed models were determined as 0.69 and 0.57, respectively.
Subject(s)
Air Pollutants/analysis , Environmental Monitoring/methods , Methane/analysis , Solid Waste/analysis , Waste Disposal Facilities , Models, Statistical , TurkeyABSTRACT
Treatment of acidic solution containing 5g/L of Fe(II) and 10mg/L of As(III) was studied in a system consisting of a biological fluidized-bed reactor (FBR) for iron oxidation, and a gravity settler for iron precipitation and separation of the ferric precipitates. At pH 3.0 and FBR retention time of 5.7h, 96-98% of the added Fe(II) precipitated (99.1% of which was jarosite). The highest iron oxidation and precipitation rates were 1070 and 28mg/L/h, respectively, and were achieved at pH 3.0. Subsequently, the effect of pH on arsenic removal through sorption and/or co-precipitation was examined by gradually decreasing solution pH from 3.0 to 1.6 (feed pH). At pH 3.0, 2.4 and 1.6, the highest arsenic removal efficiencies obtained were 99.5%, 80.1% and 7.1%, respectively. As the system had ferric precipitates in excess, decreased arsenic removal was likely due to reduced co-precipitation at pH<2.4. As(III) was partially oxidized to As(V) in the system. In shake flask experiments, As(V) sorbed onto jarosite better than As(III). Moreover, the sorption capacity of biogenic jarosite was significantly higher than that of synthetic jarosite. The developed bioprocess simultaneously and efficiently removes iron and arsenic from acidic solutions, indicating potential for mining wastewater treatment.
Subject(s)
Arsenic/chemistry , Ferric Compounds/chemistry , Sulfates/chemistry , Water Pollutants, Chemical/chemistry , Adsorption , Bioreactors , Chemical Precipitation , Ferric Compounds/metabolism , Hydrogen-Ion Concentration , Iron/metabolism , Solutions , Sulfates/metabolismABSTRACT
Both type and concentration of organic contaminants in landfill leachates show great variation depending on many factors, such as type of wastes, rate of water application, moisture content, landfill design and operation age. In this paper, highly toxic chlorophenol derivatives, poorly biodegradable, carcinogenic existence and recalcitrant properties are determined by solid phase microextraction (SPME)-GC/FID in different leachates from landfill and composting plant in Istanbul. Leachates originated from acidogenic, methanogenic phases of Odayeri sanitary landfill (OSL) and from an aerobic composting plant are considered for different chlorophenol types. It is observed that acidogenic leachate from Odayeri landfill includes 2,4-dichlorophenol, 2,6-dichlorophenol, 2,3,4-trichlorophenol, 2,3,4,5-tetrachlorophenol and 2,3,4,6-tetrachlorophenol at concentration ranges, 15-130, 18-65, 8-40, 5-20 and 10-25 microg/l, respectively. Whereas, only 2,4-dichlorophenol at a concentration range 8-40 microg/l is determined in the methanogenic leachate of the landfill, which can be considered as an indication of reductive dechlorination. There is no chlorophenol derivative in aerobic composting leachate. It is determined that acidogenic leachate from Odayeri landfill includes more species of chlorinated phenols at higher concentration.
Subject(s)
Chlorophenols/analysis , Plants/metabolism , Refuse Disposal/methods , Soil/analysis , Waste Products/analysis , Aerobiosis , Biodegradation, Environmental , Refuse Disposal/statistics & numerical data , Turkey , Waste Products/statistics & numerical dataABSTRACT
Chlorinated ethenes in drinking water could be reductively dechlorinated to non-toxic ethene by using a hydrogen based membrane biofilm reactor (H2-MBfR) under denitrifying conditions as it provides an appropriate environment for dechlorinating bacteria in biofilm communities. This study evaluates the reductive dechlorination of perchloroethene (PCE) to non-toxic ethene (ETH) and comparative community analysis of the biofilm grown on the gas permeable membrane fibers. For these purposes, three H2-MBfRs receiving three different chlorinated ethenes (PCE, TCE and DCE) were operated under different hydraulic retention times (HRTs) and H2 pressures. Among these reactors, the H2-MBfR fed with PCE (H2-MBfR 1) accomplished a complete dechlorination, whereas cis-DCE accumulated in the TCE receiving H2-MBfR 2 and no dechlorination was detected in the DCE receiving H2-MBfR 3. The results showed that 95% of PCE dechlorinated to ETH together with over 99.8% dechlorination efficiency. Nitrate was the preferred electron acceptor as the most of electrons generated from H2 oxidation used for denitrification and dechlorination started under nitrate deficient conditions at increased H2 pressures. PCR-DGGE analysis showed that Dehalococcoides were present in autotrophic biofilm community dechlorinating PCE to ethene, and RDase genes analysis revealed that pceA, tceA, bvcA and vcrA, responsible for complete dechlorination step, were available in Dehalococcoides strains.
Subject(s)
Bioreactors/microbiology , Chloroflexi/genetics , Tetrachloroethylene/metabolism , Water Purification/instrumentation , Water Purification/methods , Autotrophic Processes , Biodegradation, Environmental , Biofilms , Chloroflexi/metabolism , Equipment Design , Halogenation , Hydrogen/chemistry , Microbial Consortia/genetics , Water Pollutants, Chemical/metabolismABSTRACT
This study focused on using beer brewery wastewater (BBW) to evaluate membrane concentrate disposal and production of electricity in microbial fuel cells. In the membrane treatment of BBW, the membrane permeate concentration was 570 ± 30 mg/L corresponding to a chemical oxygen demand (COD) removal efficiency of 75 ± 5%, and the flux values changed between 160 and 40 L/m(2)-h for all membrane runs. For electricity production from membrane concentrate, the highest current density in the microbial fuel cell (MFC) was observed to be 1950 mA/m(2) according to electrode surface area with 36% COD removal efficiency and 2.48% CE with 60% BBW membrane concentrate. The morphologies of the cation exchange membrane and the MFC deterioration were studied using a scanning electron microscope (SEM), attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA). A decrease in the thermal stability of the sulfonate (-SO3H) groups was demonstrated and morphological changes were detected in the SEM analysis.
Subject(s)
Beer , Bioelectric Energy Sources , Electricity , Recycling , Wastewater , Biological Oxygen Demand Analysis , Calorimetry, Differential Scanning , Filtration , Food Industry/methods , Microscopy, Electron, Scanning , Spectroscopy, Fourier Transform Infrared , Temperature , Waste Disposal, FluidABSTRACT
The main aim of this study is to investigate the bioelectricity production in continuously-fed dual chambered microbial fuel cell (MFC). Initially, MFC was operated with different anode electrode material at constant hydraulic retention time (HRT) of 2d to evaluate the effect of electrode material on electricity production. Pt electrode yielded about 642 mW/m(2) power density, which was 4 times higher than that of the MFC with the mixed metal oxide titanium (Ti-TiO2). Further, MFC equipped with Pt electrode was operated at varying HRT (2-0.5d). The power density generation increased with decreasing HRT, corresponding to 1313 mW/m(2) which was maximum value obtained during this study. Additionally, decreasing HRT from 2 to 0.5d resulted in increasing effluent dissolved organic carbon (DOC) concentration from 1.92 g/L to 2.23 g/L, corresponding to DOC removal efficiencies of 46% and 38%, respectively.