ABSTRACT
The metal halide perovskite nanocrystals exhibit a remarkable tolerance to midgap defect states, resulting in high photoluminescence quantum yields. However, the potential of these nanocrystals for applications in display devices is hindered by the suppression of biexcitonic emission due to various Auger recombination processes. By adopting single-particle photoluminescence spectroscopy, herein, we establish that the biexcitonic quantum efficiency increases with the increase in the number of facets on cesium lead bromide perovskite nanocrystals, progressing from cube to rhombic dodecahedron to rhombicuboctahedron nanostructures. The observed enhancement is attributed mainly to an increase in their surface polarity as the number of facets increases, which reduces the Coulomb interaction of charge carriers, thereby suppressing Auger recombination. Moreover, Auger recombination rate constants obtained from the time-gated photon correlation studies exhibited a discernible decrease as the number of facets increased. These findings underscore the significance of facet engineering in fine-tuning biexciton emission in metal halide perovskite nanocrystals.
ABSTRACT
Improving the electronic conductivity and the structural robustness of covalent organic frameworks (COFs) is paramount. Here, we covalently cross-link a 2D COF with polypyrrole (Ppy) chains to form a quasi-3D COF. The 3D COF shows well-defined reflections in the SAED patterns distinctly indexed to its modeled crystal structure. This knitting of 2D COF layers with conjugated polypyrrole units improves electronic conductivity from 10-9 to 10-2 S m-1. This conductivity boost is affirmed by the presence of density of states near the Fermi level in the 3D COF, and this elevates the COF's valence band maximum by 0.52 eV with respect to the parent 2D pyrrole-functionalized COF, which agrees well with the opto-electro band gaps. The extent of HOMO elevation suggests the predominant existence of a polaron state (radical cation), giving rise to a strong EPR signal, most likely sourced from the cross-linking polypyrrole chains. A supercapacitor devised with COF20-Ppy records a high areal capacitance of 377.6 mF cm-2, higher than that of the COF loaded with noncovalently linked polypyrrole chains. Thus, the polypyrrole acts as a "conjugation bridge" across the layers, lowering the band gap and providing polarons and additional conduction pathways. This marks a far-reaching approach to converting many 2D COFs into highly ordered and conducting 3D ones.
ABSTRACT
Peptide-based biomimetic catalysts are promising materials for efficient catalytic activity in various biochemical transformations. However, their lack of operational stability and fragile nature in non-aqueous media limit their practical applications. In this study, we have developed a cladding technique to stabilize biomimetic catalysts within porous covalent organic framework (COF) scaffolds. This methodology allows for the homogeneous distribution of peptide nanotubes inside the COF (TpAzo and TpDPP) backbone, creating strong noncovalent interactions that prevent leaching. We synthesized two different peptide-amphiphiles, C10FFVK and C10FFVR, with lysine (K) and arginine (R) at the C-termini, respectively, which formed nanotubular morphologies. The C10FFVK peptide-amphiphile nanotubes exhibit enzyme-like behavior and efficiently catalyze C-C bond cleavage in a buffer medium (pH 7.5). We produced nanotubular structures of TpAzo-C10FFVK and TpDPP-C10FFVK through COF cladding by using interfacial crystallization (IC). The peptide nanotubes encased in the COF catalyze C-C bond cleavage in a buffer medium as well as in different organic solvents (such as acetonitrile, acetone, and dichloromethane). The TpAzo-C10FFVK catalyst, being heterogeneous, is easily recoverable, enabling the reaction to be performed for multiple cycles. Additionally, the synthesis of TpAzo-C10FFVK thin films facilitates catalysis in flow. As control, we synthesized another peptide-amphiphile, C10FFVR, which also forms tubular assemblies. By depositing TpAzo COF crystallites on C10FFVR nanotubes through IC, we produced TpAzo-C10FFVR nanotubular structures that expectedly did not show catalysis, suggesting the critical role of the lysines in the TpAzo-C10FFVK.
ABSTRACT
The synthesis of homogeneous covalent organic framework (COF) thin films on a desired substrate with decent crystallinity, porosity, and uniform thickness has great potential for optoelectronic applications. We have used a solution-processable sphere transmutation process to synthesize 300 ± 20 nm uniform COF thin films on a 2 × 2 cm2 TiO2-coated fluorine-doped tin oxide (FTO) surface. This process controls the nucleation of COF crystallites and molecular morphology that helps the nanospheres to arrange periodically to form homogeneous COF thin films. We have synthesized four COF thin films (TpDPP, TpEtBt, TpTab, and TpTta) with different functional backbones. In a close agreement between the experiment and density functional theory, the TpEtBr COF film showed the lowest optical band gap (2.26 eV) and highest excited-state lifetime (8.52 ns) among all four COF films. Hence, the TpEtBr COF film can participate in efficient charge generation and separation. We constructed optoelectronic devices having a glass/FTO/TiO2/COF-film/Au architecture, which serves as a model system to study the optoelectronic charge transport properties of COF thin films under dark and illuminated conditions. Visible light with a calibrated intensity of 100 mW cm-2 was used for the excitation of COF thin films. All of the COF thin films exhibit significant photocurrent after illumination with visible light in comparison to the dark. Hence, all of the COF films behave as good photoactive substrates with minimal pinhole defects. The fabricated out-of-plane photodetector device based on the TpEtBr COF thin film exhibits high photocurrent density (2.65 ± 0.24 mA cm-2 at 0.5 V) and hole mobility (8.15 ± 0.64 ×10-3 cm2 V-1 S-1) compared to other as-synthesized films, indicating the best photoactive characteristics.
ABSTRACT
Efficient and stable lead-free halide double perovskites (DPs) have attracted great attention for the future generation of electronic devices. Herein, we have developed a doping approach to incorporate Fe3+ ions into the Cs2NaBiCl6 crystal unit and reveal a crystallographic and optoelectronic study of the Cs2NaBi1-xFexCl6 double perovskite. We report a simple solid-state mechanochemical method that has a solvent-free, one-step, green chemistry approach for the synthesis of Cs2NaBi1-xFexCl6 phosphor. The analysis of powder X-ray diffraction (XRD) data determines the contraction of the lattice due to the incorporation of Fe3+ cations, and this effect is well supported by X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, and solid-state nuclear magnetic resonance spectroscopy (ss-NMR). The band gap is reduced with increasing Fe content owing to the strong overlap of the Fe-3d orbitals with Cl-3p orbitals and shift of the valence band maxima (VBM) toward higher energies, as confirmed by ultraviolet photoelectron spectroscopy (UPS) and density functional theory (DFT) analyses. Photoluminescence (PL) studies of Cs2NaBi1-xFexCl6 phosphors exhibit a large Stokes shift, broadband emission, and increased PL intensity more than ten times for 15% of Fe content phosphor with enhancement in the average decay lifetimes (up to 38 ns) compared to pristine Cs2NaBiCl6 DP. These results indicate that the transition of dark self-trapping of excitons (STEs) into bright STEs enhances yellow emission. XRD, UV, and thermo-gravimetric analysis (TGA) confirmed that the Cs2NaB1-xFexCl6 DPs have good structural and thermal stabilities. Our findings indicate that the doping of Fe3+ cations into the Cs2NaBiCl6 lattice is a constructive strategy to enhance significantly the optoelectronic properties of these phosphors.
ABSTRACT
Empowered by crystalline ordered structures and homogeneous fabrication techniques, covalent organic frameworks (COFs) have been realized with uniform morphologies and isotropic properties. However, such homogeneity often hinders various surface-dependent properties observed in asymmetric nanostructures. The challenge remains to induce heterogeneity in COFs by creating an asymmetric superstructure such as a Janus thin film. In this regard, we propose a versatile yet straightforward interfacial layer-grafting strategy to fabricate free-standing Janus-type COF-graphene thin films. Herein, two-dimensional graphene sheets were utilized as the suitable grafter due to the possibility of noncovalent interactions between the layers. The versatility of the approach was demonstrated by fabricating two distinct Janus-type films, with the COF surface interwoven with nanofibers and nanospheres. The Janus-type films showcase opposing surface morphologies originating from graphene sheets and COF nanofibers or nanospheres, preserving the porosity (552-600 m2 g-1). The unique surface chemistries of the constituent layers further endow the films with orthogonal mechanical properties, as confirmed by the nanoindentation technique. Interestingly, the graphene sheets favor the Janus-type assembly of COF nanofibers over the nanospheres. This is reflected in the better nanomechanical properties of COFfiber-graphene films (Egraphene = 300-1200 MPa; ECOF = 15-60 MPa) compared to the COFsphere-graphene films (Egraphene = 11-14 MPa; ECOF = 2-5 MPa). These results indicate a direct relationship between the mechanical properties and homo/heterogeneity of Janus-type COF films.
ABSTRACT
In glasses, a sodium ion (Na+) is a significant mobile cation that takes up a dual role, that is, as a charge compensator and also as a network modifier. As a network modifier, Na+ cations modify the structural distributions and create nonbridging oxygens. As a charge compensator, Na+ cations provide imbalanced charge for oxygen that is linked between two network-forming tetrahedra. However, the factors controlling the mobility of Na+ ions in glasses, which in turn affects the ionic conductivity, remain unclear. In the current work, using high-fidelity experiments and atomistic simulations, we demonstrate that the ionic conductivity of the Na3Al2P3O12 (Si0) glass material is dependent not only on the concentration of Na+ charge carriers but also on the number of charge-compensated oxygens within its first coordination sphere. To investigate, we chose a series of glasses formulated by the substitution of Si for P in Si0 glass based on the hypothesis that Si substitution in the presence of Na+ cations increases the number of Si-O-Al bonds, which enhances the role of Na as a charge compensator. The structural and conductivity properties of bulk glass materials are evaluated by molecular dynamics (MD) simulations, magic angle spinning-nuclear magnetic resonance, Raman spectroscopy, and impedance spectroscopy. We observe that the increasing number of charge-imbalanced bridging oxygens (BOs) with the substitution of Si for P in Si0 glass enhances the ionic conductivity by an order of magnitude-from 3.7 × 10-8 S.cm-1 to 3.3 × 10-7 S.cm-1 at 100 °C. By rigorously quantifying the channel regions in the glass structure, using MD simulations, we demonstrate that the enhanced ionic conductivity can be attributed to the increased connectivity of Na-rich channels because of the increased charge-compensated BOs around the Na atoms. Overall, this study provides new insights for designing next-generation glass-based electrolytes with superior ionic conductivity for Na-ion batteries.
ABSTRACT
The induction of macro and mesopores into two-dimensional porous covalent organic frameworks (COFs) could enhance the exposure of the intrinsic micropores toward the pollutant environment, thereby, improving the performance. However, the challenge is to build a continuous hierarchically porous macro-architecture of crystalline organic materials in the bulk scale. In this regard, we have strategized a novel synthetic method to create hierarchically porous COF foams consisting of ordered micropores (2-2.2 nm) and disordered meso and macropores (50 nm to 200 µm) as well as ordered macropores (1.5 mm to 2 cm). Herein, graphene oxide was used for creating disordered macro and mesopores in COF-GO foams. Considering the rheological features of the precursor hydrogel, we could integrate crystalline and porous COF-GO foams into self-supported three-dimensional (3D)-printed objects with the desired shapes and sizes. Therefore, we have engineered the 3D macro-architecture of COF-GO foams into complex geometries keeping their structural order and continuous porosity intact over a range of more than a million (10-9 m to 10-3 m). The interconnected 3D openings in these COF-GO foams further enhance the rapid and efficient uptake of organic and inorganic pollutants from water (>95% removal within 30 s). The abundant distribution of interconnected macroporous volume (55%) throughout the COF-GO foam matrix enhances the flow of water (1.13 × 10-3 m·s-1) which results in efficient mass transport and adsorption.
ABSTRACT
Insolubility of covalent organic frameworks (COFs) in organic solvents is one of the major obstacles for the potential application of these extended networks such as drug delivery, sensing, optoelectronics, and semiconductor device fabrication. The present work proposes a unique way to make uniform, solution-processable, crystalline, and porous COF nanospheres directly from the homogeneous solution of amine and aldehyde via spatial and temporal control of the nucleation and growth. This strategy of direct nucleation simultaneously showcases the caliber to tune the size of the COF nanospheres from 25 to 570 nm. We have also demonstrated the concept of mesoscale covalent self-assembly of those solution-processable COF nanospheres in the liquid-liquid interface (DCM-water bilayer) for the very first time, transmuting them into self-standing COF thin films with long-range ordered arrangements in two dimensions. The crystalline and porous (with TpAzo showing highest SBET of 1932 m2 g-1) free-standing COF thin films could be fabricated in a wide range of thicknesses from as low as 21 nm to as high as 630 nm. Both ß-ketoenamine (TpAzo, TpDPP) and imine (TpOMeAzo, TpOMeDPP) linked COF thin films have been synthesized via mesoscale covalent self-assembly of the solution-processable COF nanospheres illustrating the generality of this eloquent methodology. Further, the solution processability has been tested and utilized to cast COF thin films uniformly in the inner and outer surface of an alumina hollow fiber membrane. The COF thin film-alumina hollow fiber membrane composites have showcased promising selective molecular separation of He and O2, He and CO2, and He and N2.
ABSTRACT
Adaptable polymer-based solid-state electrolytes can be a game-changer toward safe, lightweight flexible batteries. We present a robust Bakelite-type organic polymer covalently decked with viologen, triazine, and phenolic moieties. Its flexible structure with cationic viologen centers incorporates counter-balancing free hydroxide ions into the polymeric framework. By design, the aromatic groups and heteroatoms in the framework can be activated under an applied potential to prompt a push-pull drive, setting off the towing of hydroxide ions via weak electrostatic, van der Waals, and hydrogen-bond interactions. The frontier orbitals from a DFT-modeled structure certify this. The hydroxyl-polymer requires minimal KOH wetting to maintain a humid environment for Grotthuss-type transport. The hydroxide ion conductivity reaches a value of 1.4 × 10-2 S cm-1 at 80 °C and 95% RH, which is retained for over 15 h. We enhanced its practical utility by coating it as a thin solid-state separator-cum-electrolyte on readily available filter paper. The composite exhibits a conductivity of 4.5 × 10-3 S cm-1 at 80 °C and 95% RH. A zinc-air battery (ZAB) constructed using this polymer-coated paper as electrolyte yields a maximum power density of 115 mW cm-2 and high specific capacitance of 435 mA h g-1. The power density recorded for our ZAB is among the best reported for polymer electrolyte-based batteries. Subsequently, the flexible battery fabricated with IISERP-POF11_OH@FilterPaper exhibits an OCV of 1.44 V, and three batteries in series power a demo traffic signal. To underscore the efficiency of hydroxide ion transport through the complex multifunctional backbone of the polymer, we calculated the diffusion coefficient for OH- (Exp: 2.9 × 10-5 cm2 s-1; Comp. 5.2 × 10-6 cm2 s-1) using electrochemical methods and MD simulations. Climbing-edge NEB calculations reveal a large energy barrier of 2.11 eV for Zn2+ to penetrate the polymer and identify hydroxide ions within the polymer, suggesting no undesirable Zn2+ crossover. Our findings assert the readily accessible C-C-linked cationic polymer's capacity as a solid-state electrolyte for ZABs and any anion-conducting membrane.
ABSTRACT
Carbon nanotubes, and synthetic organic nanotubes more generally, have in recent decades been widely explored for application in electronic devices, energy storage, catalysis and biosensors. Despite noteworthy progress made in the synthesis of nanotubular architectures with well-defined lengths and diameters, purely covalently bonded organic nanotubes have remained somewhat challenging to prepare. Here we report the synthesis of covalently bonded porous organic nanotubes (CONTs) by Schiff base reaction between a tetratopic amine-functionalized triptycene and a linear dialdehyde. The spatial orientation of the functional groups promotes the growth of the framework in one dimension, and the strong covalent bonds between carbon, nitrogen and oxygen impart the resulting CONTs with high thermal and chemical stability. Upon ultrasonication, the CONTs form intertwined structures that go on to coil and form toroidal superstructures. Computational studies give some insight into the effect of the solvent in this assembly process.