Vascular imaging with contrast agent in hard and soft tissues using microcomputed-tomography.

Vascularization is essential for many tissues and is a main requisite for various tissue-engineering strategies. Different techniques are used for highlighting vasculature, in vivo and ex vivo, in 2-D or 3-D including histological staining, immunohistochemistry, radiography, angiography, microscopy, computed tomography (CT) or micro-CT, both stand-alone and synchrotron system. Vascularization can be studied with or without a contrast agent. This paper presents the results obtained with the latest Skyscan micro-CT (Skyscan 1272, Bruker, Belgium) following barium sulphate injection replacing the bloodstream in comparison with results obtained with a Skyscan In Vivo 1076. Different hard and soft tissues were perfused with contrast agent and were harvested. Samples were analysed using both forms of micro-CT, and improved results were shown using this new micro-CT. This study highlights the vasculature using micro-CT methods. The results obtained with the Skyscan 1272 are clearly defined compared to results obtained with Skyscan 1076. In particular, this instrument highlights the high number of small vessels, which were not seen before at lower resolution. This new micro-CT opens broader possibilities in detection and characterization of the 3-D vascular tree to assess vascular tissue engineering strategies.

Evaluation of new bone formation in irradiated areas using association of mesenchymal stem cells and total fresh bone marrow mixed with calcium phosphate scaffold.

The consequences of the treatment of the squamous cell carcinomas of the upper aerodigestive tract (bone removal and external radiation therapy) are constant. Tissue engineering using biphasic calcium phosphate (BCP) and mesenchymal stem cells (MSC) is considered as a promising alternative. We previously demonstrated the efficacy of BCP and total fresh bone marrow (TBM) in regenerating irradiated bone defect. The aim of this study was to know if adding MSC to BCP + TBM mixture could improve the bone formation in irradiated bone defects. Twenty-four Lewis 1A rats received a single dose of 20 Gy to the hind limbs. MSC were sampled from non-irradiated donors and amplified in proliferative, and a part in osteogenic, medium. 3 weeks after, defects were created on femurs and tibias, which were filled with BCP alone, BCP + TBM, BCP + TBM + uncommitted MSC, or BCP + TBM + committed MSC. 3 weeks after, samples were removed and prepared for qualitative and quantitative analysis. The rate of bone ingrowth was significantly higher after implantation of BCP + TBM mixture. The adding of a high concentration of MSC, committed or not, didn't improve the bone regeneration. The association BCP + TBM remains the most efficient material for bone substitution in irradiated areas.

Surface treatments of titanium dental implants for rapid osseointegration.

The osseointegration rate of titanium dental implants is related to their composition and surface roughness. Rough-surfaced implants favor both bone anchoring and biomechanical stability. Osteoconductive calcium phosphate coatings promote bone healing and apposition, leading to the rapid biological fixation of implants. The different methods used for increasing surface roughness or applying osteoconductive coatings to titanium dental implants are reviewed. Surface treatments, such as titanium plasma-spraying, grit-blasting, acid-etching, anodization or calcium phosphate coatings, and their corresponding surface morphologies and properties are described. Most of these surfaces are commercially available and have proven clinical efficacy (>95% over 5 years). The precise role of surface chemistry and topography on the early events in dental implant osseointegration remain poorly understood. In addition, comparative clinical studies with different implant surfaces are rarely performed. The future of dental implantology should aim to develop surfaces with controlled and standardized topography or chemistry. This approach will be the only way to understand the interactions between proteins, cells and tissues, and implant surfaces. The local release of bone stimulating or resorptive drugs in the peri-implant region may also respond to difficult clinical situations with poor bone quality and quantity. These therapeutic strategies should ultimately enhance the osseointegration process of dental implants for their immediate loading and long-term success.

Interaction between hydroxypropyl methylcellulose and biphasic calcium phosphate after steam sterilisation: capillary gas chromatography studies.

The purpose of this study was to check the chemical stability of an injectable bone substitute (IBS) composed of a 50/50 w/w mixture of 2.92% hydroxypropyl methylcellulose (HPMC) solution in deionized water containing biphasic calcium phosphate (BCP) granules (60% hydroxyapatite/40% beta-tricalcium phosphate w/w). After separation of the organic and mineral phases, capillary gas chromatography (GC) was used to study the possible modification of HPMC due to the contact with BCP granules following steam sterilisation and 32 days storage at room temperature. HPMC was extracted from IBS in aqueous medium, and a dialytic method was then used to extract calcium phosphate salts from the HPMC. The percentage of HPMC extracted from BCP was 98.5%+/-0.5%, as measured by UV. GC showed no chemical modifications after steam sterilisation and storage.

Skin sensitization study of two hydroxypropyl methylcellulose components (Benecel and E4M) of an injectable bone substitute in guinea pigs.

Although initial results were promising for an injectable bone substitute (IBS) associating a hydroxypropyl methylcellulose (HPMC) polymer vector (Benecel, 2 w/w %) with biphasic calcium phosphate (BCP), a sensitization reaction occurred probably related to the degree of polymer purity. In this context, Benecel and another HPMC, E4M were investigated in the present study. The expected composition of the polymers was confirmed by gas-liquid chromatography. Studies in the guinea pig showed that Benecel has strong sensitization capacity and E4M none. Benecel manifests impurities (30 times more than E4M) in individual fibers or rounded clumps that are apparently responsible for extreme sensitization. Purification by ultracentrifugation associated with 0.2 microm filtration can decrease sensitization capacity considerably, though with a slight loss of polymer concentration. Fourier transform infrared (FTIR) analysis showed that the impurities were largely cellulose derivatives. However, extraction by organic solvent, followed by FTIR studies and micro-X analysis, detected an oily substance containing carbon and silicon associated with the cellulose derivatives. E4M, a polymer with no sensitization capacity, could replace Benecel and improve results with IBS.