ABSTRACT
During October 2021, the County of San Diego Health and Human Services Agency identified five cases of shigellosis among persons experiencing homelessness (PEH). We conducted an outbreak investigation and developed interventions to respond to shigellosis outbreaks among PEH. Confirmed cases occurred among PEH with stool-cultured Shigella sonnei; probable cases were among PEH with Shigella-positive culture-independent diagnostic testing. Patients were interviewed to determine infectious sources and risk factors. Fifty-three patients were identified (47 confirmed, 6 probable); 34 (64%) were hospitalised. None died. No point source was identified. Patients reported inadequate access to clean water and sanitation facilities, including public restrooms closed because of the COVID-19 pandemic. After implementing interventions, including handwashing stations, more frequent public restroom cleaning, sanitation kit distribution, and isolation housing for ill persons, S. sonnei cases decreased to preoutbreak frequencies. Improving public sanitation access was associated with decreased cases and should be considered to prevent outbreaks among PEH.
Subject(s)
Dysentery, Bacillary , Ill-Housed Persons , Humans , Dysentery, Bacillary/epidemiology , Pandemics , Disease Outbreaks/prevention & control , CaliforniaABSTRACT
BACKGROUND: In Spring 2021, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) B.1.1.7 (Alpha) became the predominant variant in the United States. Research suggests that Alpha has increased transmissibility compared with non-Alpha lineages. We estimated household secondary infection risk (SIR), assessed characteristics associated with transmission, and compared symptoms of persons with Alpha and non-Alpha infections. METHODS: We followed households with SARS-CoV-2 infection for 2 weeks in San Diego County and metropolitan Denver, January to April 2021. We collected epidemiologic information and biospecimens for serology, reverse transcription-polymerase chain reaction (RT-PCR), and whole-genome sequencing. We stratified SIR and symptoms by lineage and identified characteristics associated with transmission using generalized estimating equations. RESULTS: We investigated 127 households with 322 household contacts; 72 households (56.7%) had member(s) with secondary infections. SIRs were not significantly higher for Alpha (61.0% [95% confidence interval, 52.4-69.0%]) than non-Alpha (55.6% [44.7-65.9%], Pâ =â .49). In households with Alpha, persons who identified as Asian or Hispanic/Latino had significantly higher SIRs than those who identified as White (Pâ =â .01 and .03, respectively). Close contact (eg, kissing, hugging) with primary cases was associated with increased transmission for all lineages. Persons with Alpha infection were more likely to report constitutional symptoms than persons with non-Alpha (86.9% vs 76.8%, Pâ =â .05). CONCLUSIONS: Household SIRs were similar for Alpha and non-Alpha. Comparable SIRs may be due to saturation of transmission risk in households due to extensive close contact, or true lack of difference in transmission rates. Avoiding close contact within households may reduce SARS-CoV-2 transmission for all lineages among household members.
Subject(s)
COVID-19 , SARS-CoV-2 , COVID-19/epidemiology , Family Characteristics , Humans , SARS-CoV-2/genetics , United States/epidemiologyABSTRACT
OBJECTIVE: To assess the household secondary infection risk (SIR) of B.1.1.7 (Alpha) and non-Alpha lineages of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) among children. STUDY DESIGN: During January to April 2021, we prospectively followed households with a SARS-CoV-2 infection. We collected questionnaires, serial nasopharyngeal swabs for reverse transcription polymerase chain reaction testing and whole genome sequencing, and serial blood samples for serology testing. We calculated SIRs by primary case age (pediatric vs adult), household contact age, and viral lineage. We evaluated risk factors associated with transmission and described symptom profiles among children. RESULTS: Among 36 households with pediatric primary cases, 21 (58%) had secondary infections. Among 91 households with adult primary cases, 51 (56%) had secondary infections. SIRs among pediatric and adult primary cases were 45% and 54%, respectively (OR, 0.79; 95% CI, 0.41-1.54). SIRs among pediatric primary cases with Alpha and non-Alpha lineage were 55% and 46%, respectively (OR, 1.52; 95% CI, 0.51-4.53). SIRs among pediatric and adult household contacts were 55% and 49%, respectively (OR, 1.01; 95% CI, 0.68-1.50). Among pediatric contacts, no significant differences in the odds of acquiring infection by demographic or household characteristics were observed. CONCLUSIONS: Household transmission of SARS-CoV-2 from children and adult primary cases to household members was frequent. The risk of secondary infection was similar among child and adult household contacts. Among children, household transmission of SARS-CoV-2 and the risk of secondary infection was not influenced by lineage. Continued mitigation strategies (eg, masking, physical distancing, vaccination) are needed to protect at-risk groups regardless of virus lineage circulating in communities.
Subject(s)
COVID-19 , SARS-CoV-2 , Adult , COVID-19/epidemiology , California , Child , Colorado/epidemiology , HumansABSTRACT
Front-line health care workers are among the most vulnerable groups at risk for acquiring COVID-19, yet the exact mechanisms of how infections occur in health care settings are yet to be identified. OBJECTIVES: To review the epidemiologic and environmental factors surrounding a cluster of nosocomially acquired COVID-19 cases with possible non respiratory droplet transmission indicating the importance of strict adherence with isolation procedures for patients and staff. METHODS: Contact and environmental investigations were completed to determine the source and possible routes of hospital transmission of COVID-19. RESULTS: Seven cases of COVID-19 occurred in the COVID-19 isolation ward of a secondary hospital from 12/04/2020 to 01/05/2020. Analysis also included first four COVID-19 patients admitted to this facility. Epidemiologic links included exposure to massive bowel movements of two infected patients in adjoining rooms on the same day. Serious gaps in infection control practices lead to further spread the virus and cross infection between the staff. CONCLUSION: Despite preparedness to combat pandemics, the infection control precautions taken at this facility were found not sufficient to prevent nosocomial spread of COVID-19. Issues were identified with compliance, enforcement, and failure to update to the most current guidance. Urgent review of ongoing hygiene and isolation practices in hospitals of this type is indicated. Further studies are required to better understand the role of fecal oral transmission and environmental contamination in the transmission of COVID-19.
ABSTRACT
STATEMENT OF PROBLEM: Complete seating of a single crown may not be possible if the interproximal contacts are excessively tight. Incomplete seating can lead to open margins, inflammation of the gingival tissue, and recurrent dental caries. PURPOSE: The purpose of this in vitro study was to determine the accuracy of 3 different methods of evaluating interproximal contacts when seating a single crown. MATERIAL AND METHODS: Thirty-five restorative dentists practicing in the Lincoln, Nebraska, area were polled to determine the methods they used most commonly to evaluate the interproximal contacts of crowns. These dentists then evaluated the interproximal contacts of 9 anatomic contour zirconia crowns on a dentoform using 3 different methods: floss and explorer, occlusal articulating film (AccuFilm), and shim stock. Crown fit was evaluated using 1 method at a time. Each crown was recorded as either "accept" or "reject" according to the individual clinician. All data were analyzed with the McNemar test (α=.05). RESULTS: Of the 35 restorative dentists polled, 34 identified floss and explorer, 9 identified occlusal articulating film, 3 identified shim stock, and 3 identified an occlusal spray as their method of evaluating interproximal contacts. These methods were used either alone or in conjunction with other methods. Evaluation of the in vitro data revealed that shim stock and occlusal articulating film were significantly more accurate than floss and explorer for assessing interproximal contacts in poorly fitting crowns (P<.001). For well-fitting crowns, shim stock and occlusal articulating film were significantly more accurate than floss and explorer (P<.001). CONCLUSIONS: This study showed that the floss and explorer method was the least accurate means of evaluating the interproximal fit of crowns. Shim stock provided the most accurate method of evaluating interproximal contact, and occlusal articulating film provided both high accuracy and a visible mark to facilitate adjustment.
Subject(s)
Dental Caries , Tooth , Crowns , HumansABSTRACT
STATEMENT OF PROBLEM: Whether using tap water to rinse off debris will make a clinical difference to the surface detail of a gypsum cast is unknown. In addition, how best to remove debris from the cast is unknown. PURPOSE: The purpose of this in vitro study was to evaluate the efficiency of different methods of cleaning a gypsum cast after trimming and the effect of short-term exposure to tap water on the surface quality of the cast. MATERIAL AND METHODS: A die fitting American National Standards Institute/American Dental Association specification 25 (International Standards Organization specification 6873) for dental gypsum products was embedded in a Dentoform with the machined lines positioned at the same level as the occlusal surface of the posterior teeth. A flat plate was used to ensure that the plane of occlusion for the die was at the same position as the posterior teeth. Forty polyvinyl siloxane impressions of the Dentoform were made and poured with vacuum-mixed improved Type IV dental stone. Each cast was inspected for the accurate reproduction of the lines. The base of the 2-stage pour was trimmed with a cast trimmer with water, and surface debris was removed by rinsing by hand under tap water for 10 seconds, by brushing the cast with a soft toothbrush for 10 seconds, or by resoaking the cast and using a soft camel hair brush in slurry water for 10 seconds. The amount of debris was evaluated on a scale of 1 to 4, and the quality of the 20-µm line was evaluated on a scale of 1 to 4 under ×15 magnification. The nonparametric Kruskal-Wallis ranks test was used to identify significant differences among the different cleaning methods (α=.05). RESULTS: Results of the Kruskal-Wallis and Kruskal-Wallis Z-value tests demonstrated that all cleaning methods produced cleaner casts than were observed for uncleansed controls (P<.001), but no differences in debris removal were found among the different cleaning methods (.065≤P≤.901). The ability to see the quality of a 20-µm line (P=.974) was not statistically different among the groups. CONCLUSIONS: Rinsing the cast under flowing tap water and brushing, or hand washing under flowing tap water, or using a soft camel hair brush in slurry water for 10 seconds had no noticeable effects on the quality of a 20-µm line, and all 3 methods resulted in a clean cast.
Subject(s)
Dental Casting Technique/instrumentation , Calcium Sulfate , Dental Materials , Humans , In Vitro TechniquesABSTRACT
PURPOSE: Controversy exists as to whether lining a metal-perforated impression tray with wax will yield a distorted irreversible hydrocolloid impression. Two current textbooks have completely different recommendations, but there is no evidence to support either theory. This project evaluates distortion in gypsum casts that have been prepared from wax-lined and unlined metal impression trays. The purpose of this study was to assess the influence of wax on the border and in the palate of metal-perforated impression trays on the dimensional stability of the resulting irreversible hydrocolloid impression. MATERIALS AND METHODS: A dentaform was prepared with marks on the cusp tips of teeth 6 and 11 and distobuccal cusps of teeth 2 and 15. Using a standard maxillary rim lock impression tray, alginate impressions were made using a dentaform with no wax lining, wax lining the border of the tray, and wax lining the border and the palate (n = 10). Casts were randomized. Six measurements were taken using a stereographic measuring microscope, from tooth #6 to #11, #11 to #15, #15 to #2, #2 to #6, #6 to #15, and #2 to #11. An acrylic template was used to position the cast in a reproducible position on the microscope. RESULTS: Trays lined with wax on the border and the palate yielded casts with significantly different dimensions when compared to those poured from unlined or border-lined trays (p < 0.05). Casts produced from unlined and border-lined trays were not significantly different in dimension from the dentaform (p > 0.05). CONCLUSION: There is no difference between the metal tray with no wax, the metal tray with a wax around the border, and the dentaform. The clinician can make irreversible hydrocolloid impressions using wax on the periphery or without wax on the periphery and feel confident that the impression has not been compromised in its ability to accurately reproduce the maxillary arch when used. Caution should be exercised when adding wax to the palate of the impression tray.
Subject(s)
Calcium Sulfate , Dental Impression Materials , Dental Impression Technique , Humans , Microscopy , Models, DentalABSTRACT
BACKGROUND: Dengue is caused by an arthropod-borne flavivirus. Infection can be either primary or secondary based on serology, with each stage of the disease characterized by specific serological conversion and antibody formation. Further study is needed to fully identify the factors associated with and predisposing to dengue infection. The objective of this study was to identify socio-demographic factors associated with the prevalence of dengue serotypes in Kassala State in the eastern part of Sudan in 2011. METHODS: This was a cross-sectional community-based study with 530 participants who were randomly selected through multi-stage cluster sampling. Dengue serotype prevalence was determined using capture Enzyme-linked immunosorbent assay (ELISA). ELISA IgG. A multivariate logistic regression model was designed to measure the strength of associations between socio-demographic factors and dengue serotype prevalence. All participants who tested negative for dengue were used as the statistical reference group. RESULTS: From this study, the prevalence of dengue in Kassala was estimated to be 9.4% (95% CI: 7.1-12.3). Lack of knowledge about dengue fever disease (OR 2.8, 95% CI: 1.24-6.53) and a household density of more than 3 people per room (OR 2.1, 95% CI: 1.06-4.09) were the most important factors associated with dengue infection among the study population. CONCLUSIONS: Community-oriented interventions are needed to modify existing social behaviors to reduce the risk of dengue in the eastern part of Sudan. Additional studies are also required in this field.
Subject(s)
Demography , Dengue Virus/isolation & purification , Dengue/epidemiology , Social Environment , Adolescent , Adult , Aged , Aged, 80 and over , Antibodies, Viral/blood , Community-Based Participatory Research , Cross-Sectional Studies , Dengue/blood , Enzyme-Linked Immunosorbent Assay , Family Characteristics , Female , Humans , Immunoglobulin G/blood , Male , Middle Aged , Prevalence , Sudan/epidemiology , Young AdultABSTRACT
STATEMENT OF PROBLEM: Facial prosthetic elastomers with wide ranges in hardness are available, yet material weatherability is unknown. PURPOSE: The purpose of this study was to assess color, Durometer hardness, and tensile property changes after 3000 hours of outdoor weathering. MATERIAL AND METHODS: Unpigmented elastomers with Durometer hardness 5, 30, 50, 70, and A-2186 were polymerized into dumbbells (ASTM D412) and disks, 34 mm in diameter by 6 mm thick. Materials were subjected to outdoor or time passage environments for 3000 hours. CIELab color (n=5), Durometer hardness (n=5), and tensile mechanical properties (n=10) were measured at 0 and 3000 hours, and group differences were assessed by material and weathering condition (ANOVA/Tukey, α=.05). RESULTS: Except for A-2186, the mean Durometer changes for all materials were 1 unit or less, with no significant differences observed between time passage and weathered groups (P≥.05). Three-thousand-hour tensile mechanical property results demonstrated nonsignificant differences between time passage and weathered materials but significantly changed properties from immediately tested materials (P<.001). Outdoor weathering induced perceptible but acceptable color changes (1.7≤ΔE*≤2.6) for elastomers with Durometer hardness 5 and 30 and A-2186. CONCLUSIONS: With a few exceptions, outdoor weathering produced relatively small changes in color, Durometer hardness, or tensile properties compared with time passage.
Subject(s)
Biocompatible Materials/chemistry , Environment , Prostheses and Implants , Silicone Elastomers/chemistry , Color , Darkness , Dimethylpolysiloxanes/chemistry , Elastic Modulus , Hardness , Humans , Materials Testing , Polymerization , Spectrophotometry/instrumentation , Sunlight , Tensile Strength , Time FactorsABSTRACT
INTRODUCTION: Invisalign plastic aligners (Align Technology, Santa Clara, Calif) are used to correct malocclusions. The aligners wrap around the teeth and are in contact with gingival epithelium during treatment. The purpose of this study was to evaluate the cellular responses of oral epithelium exposed to Invisalign plastic in vitro. METHODS: Oral epithelial cells were exposed to eluate obtained by soaking Invisalign plastic in either saline solution or artificial saliva for 2, 4, and 8 weeks. Cells grown in media containing saline solution or saliva served as controls. Morphologic changes were assessed by light microscopy. The 3-[4, 5-dimethythiazol- 2-yl]-2, 5-diphenyl tetrazolium bromide assay and flow cytometry were used to determine cell viability and membrane integrity, respectively. Cellular adhesion and micromotion of epithelial cells were measured in real time by electrical cell-substrate impedance sensing. RESULTS: Cells exposed to saline-solution eluate appeared rounded, were lifted from the culture plates, and demonstrated significantly increased metabolic inactivity or cell death (P <0.05). Saliva eluates did not induce significant changes in cell viability compared with untreated cells. Flow cytometry and electric cell-substrate impedance sensing showed that cells treated with saline-solution eluate exhibited compromised membrane integrity, and reduced cell-to-cell contact and mobility when compared with saliva-eluate treatment. CONCLUSIONS: Exposure to Invisalign plastic caused changes in viability, membrane permeability, and adhesion of epithelial cells in a saline-solution environment. Microleakage and hapten formation secondary to compromised epithelial integrity might lead to isocyanate allergy, which could be systemic or localized to gingiva. However, these results suggest that saliva might offer protection.
Subject(s)
Dental Materials/pharmacology , Gingiva/drug effects , Keratinocytes/drug effects , Orthodontic Appliances , Plastics/pharmacology , Polyurethanes/pharmacology , Tooth Movement Techniques/instrumentation , Cell Adhesion/drug effects , Cell Culture Techniques , Cell Death/drug effects , Cell Line , Cell Membrane/drug effects , Cell Membrane Permeability/drug effects , Cell Movement/drug effects , Cell Survival/drug effects , Colorimetry/methods , Coloring Agents , Culture Media , Dental Materials/chemistry , Electric Impedance , Epithelial Cells/drug effects , Flow Cytometry , Gingiva/cytology , Humans , Materials Testing , Plastics/chemistry , Polyurethanes/chemistry , Saliva/physiology , Saliva, Artificial/chemistry , Sodium Chloride/chemistry , Tetrazolium Salts , Thiazoles , Time FactorsABSTRACT
STATEMENT OF PROBLEM: Currently, no commercially available facial shade guide exists in the United States for the fabrication of facial prostheses. PURPOSE: The purpose of this study was to measure facial skin and lip color in a human population sample stratified by age, gender, and race. Clustering analysis was used to determine optimal color coordinates for a proposed facial shade guide. MATERIAL AND METHODS: Participants (n=119) were recruited from 4 racial/ethnic groups, 5 age groups, and both genders. Reflectance measurements of participants' noses and lower lips were made by using a spectroradiometer and xenon arc lamp with a 45/0 optical configuration. Repeated measures ANOVA (α=.05), to identify skin and lip color differences, resulting from race, age, gender, and location, and a hierarchical clustering analysis, to identify clusters of skin colors) were used. RESULTS: Significant contributors to L*a*b* facial color were race and facial location (P<.01). b* affected all factors (P<.05). Age affected only b* (P<.001), while gender affected only L* (P<.05) and b* (P<.05). Analyses identified 5 clusters of skin color. CONCLUSIONS: The study showed that skin color caused by age and gender primarily occurred within the yellow-blue axis. A significant lightness difference between gender groups was also found. Clustering analysis identified 5 distinct skin shade tabs.
Subject(s)
Face/anatomy & histology , Lip/anatomy & histology , Prosthesis Coloring/instrumentation , Prosthesis Design/instrumentation , Skin Pigmentation/physiology , Adolescent , Adult , Age Factors , Aged , Aged, 80 and over , Asian People , Black People , Cluster Analysis , Color , Female , Humans , Male , Middle Aged , Nose/anatomy & histology , Pilot Projects , Radiometry/instrumentation , Sex Factors , White People , Young AdultABSTRACT
Prosthesis discomfort and a lack of skin-like quality is a source of patient dissatisfaction with facial prostheses. To engineer skin-like replacements, knowledge of the differences between facial skin properties and those for prosthetic materials is essential. This project measured six viscoelastic properties (percent laxity, stiffness, elastic deformation, creep, absorbed energy, and percent elasticity) at six facial locations with a suction device in a human adult population equally stratified for age, sex, and race. The same properties were measured for eight facial prosthetic elastomers currently available for clinical usage. The results showed that the prosthetic materials were 1.8 to 6.4 times higher in stiffness, 2 to 4 times lower in absorbed energy, and 2.75 to 9 times lower in viscous creep than facial skin (p < 0.001). Clustering analyses determined that facial skin properties fell into three groups-those associated with body of ear, cheek, and remaining locations. This provides baseline information for designing future replacements for missing facial tissues.
ABSTRACT
Facial prosthetics are currently constructed of materials that are far from optimal; superior materials with a "skin-like" feel are required. In this study, the property changes brought about by the consecutive additions of hydrophobic- and uncoated nano-SiO2 to polydimethylsiloxane (PDMS) are assessed, and the alterations are compared with those observed for conventional submicron SiO2-filled materials. In sequence, 0%, 0.5%, 5%, 10%, and 15% by weight of each filler type were successively added to vinyl-terminated PDMS. Tensile, tear, Durometer hardness, translucency, and viscoelastic properties were assessed, and hardness and translucency were further measured after 3000 h of outdoor weathering. The results showed that 15% coated nano- SiO2-filled PDMS materials given the highest tensile strength, elastic modulus, storage modulus, loss modulus, tear strength, and durometer hardness (p < 0.05), whereas 15% submicron coated SiO2-filled materials displayed the highest failure strain and translucency parameter (p < 0.05). Only 10%- and 15%-filled submicron SiO2 PDMS materials were altered by outdoor weathering; nevertheless, the increases were assessed to be too small to be clinically perceptible. As increased filler levels provided protection against solar radiation, heat, and moisture, only unfilled and 0.5%-filled PDMS formulations discolored from weathering. 15%-filled superhydrophobic-coated nano- SiO2-filled PDMS was found to produce the strongest, most tear-resistant, and least translucent materials, but it also produced materials with limited stretchability and high hardness, which were regarded to be downsides for creating a "skin-like" feel.
ABSTRACT
Introduction: Mitigation behaviors are key to preventing SARS-CoV-2 transmission. We identified the behaviors associated with secondary transmission from confirmed SARS-CoV-2 primary cases to household contacts and described the characteristics associated with reporting these behaviors. Methods: Households with confirmed SARS-CoV-2 infections were recruited in California and Colorado from January to April 2021. Self-reported behaviors and demographics were collected through interviews. We investigated behaviors associated with transmission and individual and household characteristics associated with behaviors using univariable and multivariable logistic regression with generalized estimating equations to account for household clustering. Results: Among household contacts of primary cases, 43.3% (133 of 307) became infected with SARS-CoV-2. When an adjusted analysis was conducted, household contacts who slept in the same bedroom with the primary case (AOR=2.19; 95% CI=1.25, 3.84) and ate food prepared by the primary case (AOR=1.98; 95% CI=1.02, 3.87) had increased odds of SARS-CoV-2 infection. Household contacts in homes ≤2,000 square feet had increased odds of sleeping in the same bedroom as the primary case compared with those in homes >2,000 square feet (AOR=3.97; 95% CI=1.73, 9.10). Parents, siblings, and other relationships (extended family, friends, or roommates) of the primary case had decreased odds of eating food prepared by the primary case compared with partners. Conclusions: Sleeping in the same bedroom as the primary case and eating food prepared by the primary case were associated with secondary transmission. Household dimension and relationship to the primary case were associated with these behaviors. Our findings encourage innovative means to promote adherence to mitigation measures that reduce household transmission.
ABSTRACT
BACKGROUND: Between November 2021 and February 2022, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) Delta and Omicron variants co-circulated in the United States, allowing for co-infections and possible recombination events. METHODS: We sequenced 29,719 positive samples during this period and analyzed the presence and fraction of reads supporting mutations specific to either the Delta or Omicron variant. FINDINGS: We identified 18 co-infections, one of which displayed evidence of a low Delta-Omicron recombinant viral population. We also identified two independent cases of infection by a Delta-Omicron recombinant virus, where 100% of the viral RNA came from one clonal recombinant. In the three cases, the 5' end of the viral genome was from the Delta genome and the 3' end from Omicron, including the majority of the spike protein gene, though the breakpoints were different. CONCLUSIONS: Delta-Omicron recombinant viruses were rare, and there is currently no evidence that Delta-Omicron recombinant viruses are more transmissible between hosts compared with the circulating Omicron lineages. FUNDING: This research was supported by the NIH RADx initiative and by the Centers for Disease Control Contract 75D30121C12730 (Helix).
Subject(s)
COVID-19 , Coinfection , Orthopoxvirus , Humans , SARS-CoV-2/genetics , Genome, Viral/geneticsABSTRACT
While risk of fomite transmission of SARS-CoV-2 is considered low, there is limited environmental data within households. This January-April 2021 investigation describes frequency and types of surfaces positive for SARS-CoV-2 by real-time reverse transcription polymerase chain reaction (RT-PCR) among residences with ≥1 SARS-CoV-2 infection, and associations of household characteristics with surface RT-PCR and viable virus positivity. Of 1232 samples from 124 households, 27.8% (n = 342) were RT-PCR positive with nightstands (44.1%) and pillows (40.9%) most frequently positive. SARS-CoV-2 lineage, documented household transmission, greater number of infected persons, shorter interval between illness onset and sampling, total household symptoms, proportion of infected persons ≤12 years old, and persons exhibiting upper respiratory symptoms or diarrhea were associated with more positive surfaces. Viable virus was isolated from 0.2% (n = 3 samples from one household) of all samples. This investigation suggests that while SARS-CoV-2 on surfaces is common, fomite transmission risk in households is low.
Subject(s)
COVID-19 , SARS-CoV-2 , COVID-19/epidemiology , COVID-19 Testing , Child , Colorado , Humans , Reverse Transcriptase Polymerase Chain Reaction , SARS-CoV-2/geneticsABSTRACT
Importance: As self-collected home antigen tests become widely available, a better understanding of their performance during the course of SARS-CoV-2 infection is needed. Objective: To evaluate the diagnostic performance of home antigen tests compared with reverse transcription-polymerase chain reaction (RT-PCR) and viral culture by days from illness onset, as well as user acceptability. Design, Setting, and Participants: This prospective cohort study was conducted from January to May 2021 in San Diego County, California, and metropolitan Denver, Colorado. The convenience sample included adults and children with RT-PCR-confirmed infection who used self-collected home antigen tests for 15 days and underwent at least 1 nasopharyngeal swab for RT-PCR, viral culture, and sequencing. Exposures: SARS-CoV-2 infection. Main Outcomes and Measures: The primary outcome was the daily sensitivity of home antigen tests to detect RT-PCR-confirmed cases. Secondary outcomes included the daily percentage of antigen test, RT-PCR, and viral culture results that were positive, and antigen test sensitivity compared with same-day RT-PCR and cultures. Antigen test use errors and acceptability were assessed for a subset of participants. Results: This study enrolled 225 persons with RT-PCR-confirmed infection (median [range] age, 29 [1-83] years; 117 female participants [52%]; 10 [4%] Asian, 6 [3%] Black or African American, 50 [22%] Hispanic or Latino, 3 [1%] Native Hawaiian or Other Pacific Islander, 145 [64%] White, and 11 [5%] multiracial individuals) who completed 3044 antigen tests and 642 nasopharyngeal swabs. Antigen test sensitivity was 50% (95% CI, 45%-55%) during the infectious period, 64% (95% CI, 56%-70%) compared with same-day RT-PCR, and 84% (95% CI, 75%-90%) compared with same-day cultures. Antigen test sensitivity peaked 4 days after illness onset at 77% (95% CI, 69%-83%). Antigen test sensitivity improved with a second antigen test 1 to 2 days later, particularly early in the infection. Six days after illness onset, antigen test result positivity was 61% (95% CI, 53%-68%). Almost all (216 [96%]) surveyed individuals reported that they would be more likely to get tested for SARS-CoV-2 infection if home antigen tests were available over the counter. Conclusions and Relevance: The results of this cohort study of home antigen tests suggest that sensitivity for SARS-CoV-2 was moderate compared with RT-PCR and high compared with viral culture. The results also suggest that symptomatic individuals with an initial negative home antigen test result for SARS-CoV-2 infection should test again 1 to 2 days later because test sensitivity peaked several days after illness onset and improved with repeated testing.
Subject(s)
COVID-19 , Adult , COVID-19/diagnosis , Child , Cohort Studies , Female , Humans , Prospective Studies , Reverse Transcriptase Polymerase Chain Reaction , SARS-CoV-2/genetics , Sensitivity and SpecificityABSTRACT
BACKGROUND: COVID-19 vaccination reduces SARS-CoV-2 infection and transmission. However, evidence is emerging on the degree of protection across variants and in high-transmission settings. To better understand the protection afforded by vaccination specifically in a high-transmission setting, we examined household transmission of SARS-CoV-2 during a period of high community incidence with predominant SARS-CoV-2 B.1.1.7 (Alpha) variant, among vaccinated and unvaccinated contacts. METHODS: We conducted a household transmission investigation in San Diego County, California, and Denver, Colorado, during January-April 2021. Households were enrolled if they had at least one person with documented SARS-CoV-2 infection. We collected nasopharyngeal swabs, blood, demographic information, and vaccination history from all consenting household members. We compared infection risks (IRs), RT-PCR cycle threshold values, SARS-CoV-2 culture results, and antibody statuses among vaccinated and unvaccinated household contacts. RESULTS: We enrolled 493 individuals from 138 households. The SARS-CoV-2 variant was identified from 121/138 households (88%). The most common variants were Alpha (75/121, 62%) and Epsilon (19/121, 16%). There were no households with discordant lineages among household members. One fully vaccinated secondary case was symptomatic (13%); the other 5 were asymptomatic (87%). Among unvaccinated secondary cases, 105/108 (97%) were symptomatic. Among 127 households with a single primary case, the IR for household contacts was 45% (146/322; 95% Confidence Interval [CI] 40-51%). The observed IR was higher in unvaccinated (130/257, 49%, 95% CI 45-57%) than fully vaccinated contacts (6/26, 23%, 95% CI 11-42%). A lower proportion of households with a fully vaccinated primary case had secondary cases (1/5, 20%) than households with an unvaccinated primary case (66/108, 62%). CONCLUSIONS: Although SARS-CoV-2 infections in vaccinated household contacts were reported in this high transmission setting, full vaccination protected against SARS-CoV-2 infection. These findings further support the protective effect of COVID-19 vaccination and highlight the need for ongoing vaccination among eligible persons.
Subject(s)
COVID-19 , SARS-CoV-2 , COVID-19/epidemiology , COVID-19/prevention & control , COVID-19 Vaccines , California/epidemiology , Colorado/epidemiology , HumansABSTRACT
BACKGROUND: The average annual reported dengue incidence in Cambodia is 3.3/1,000 among children < 15 years of age (2002-2007). To estimate the economic burden of dengue, accurate cost-of-illness data are essential. We conducted a prospective, community-based, matched case-control study to assess the cost and impact of an episode of dengue fever and other febrile illness on households in rural Cambodia. METHODS: In 2006, active fever surveillance was conducted among a cohort of 6,694 children aged < or = 15 years in 16 villages in Kampong Cham province, Cambodia. Subsequently, a case-control study was performed by individually assigning one non-dengue febrile control from the cohort to each laboratory-confirmed dengue case. Parents of cases and controls were interviewed using a standardized questionnaire to determine household-level, illness-related expenditures for medical and non-medical costs, and estimated income loss (see Additional file 1). The household socio-economic status was determined and its possible association with health seeking behaviour and the ability to pay for the costs of a febrile illness. RESULTS: Between September and November 2006, a total of 60 household heads were interviewed: 30 with dengue-positive and 30 with dengue-negative febrile children. Mean total dengue-related costs did not differ from those of other febrile illnesses (31.5 vs. 27.2 US dollars, p = 0.44). Hospitalization almost tripled the costs of dengue (from 14.3 to 40.1 US dollars) and doubled the costs of other febrile illnesses (from 17.0 to 36.2 US dollars). To finance the cost of a febrile illness, 67% of households incurred an average debt of 23.5 US dollars and higher debt was associated with hospitalization compared to outpatient treatment (23.1 US dollars vs. 4.5 US dollars, p < 0.001). These costs compared to an average one-week expenditure on food of 9.5 US dollars per household (range 2.5-21.3). In multivariate analysis, higher socio-economic status (odds ratio [OR] 4.4; 95% confidence interval [CI] 1.4-13.2), duration of fever (OR 2.1; 95%CI 1.3-3.5), and age (OR 0.8; 95%CI 0.7-0.9) were independently associated with hospitalization. CONCLUSION: In Cambodia, dengue and other febrile illnesses pose a financial burden to households. A possible reason for a lower rate of hospitalization among children from poor households could be the burden of higher illness-related costs and debts.