Evaluation of the insertion torque, implant stability quotient and drilled hole quality for different drill design: an in vitro Investigation.

OBJECTIVE: The purpose of the present study was to compare the insertion torque and implant stability quotient between different drill design for implant site preparation. MATERIALS AND METHODS: Synthetic blocks of bone (type I density) were used for drilling procedures. Three groups were evaluated: Group G1 - drilling with a single bur for a 4.2 mm conical implant; Group G2 and Group G3 - drilling with three consecutive burs for a 4.1 mm cylindrical implant and for a 4.3 mm conical implant respectively. For each group, 15 drilling procedures were performed without irrigation for 10-mm in-depth. The drilled hole quality (HQ) after the osteotomy for implant site preparation was measured in the five-first holes through a fully automated roundness/cylindricity instrument at three levels (top, middle, and bottom of the site). The insertion torque value (ITV) was achieved with a computed torquimeter and the implant stability quotient (ISQ) values were measured using a resonance frequency apparatus. RESULTS: The single drill (group 1) achieved a significantly higher ITV and ISQ than the multiple drills for osteotomy (groups 2 and 3). Group 1 and 3 displayed significantly better HQ than group 2. CONCLUSIONS: Within the limitations of the study, the results suggest that the hole quality, in addition to the insertion torque, may significantly affect implant primary stability.

Immediate Implant Placement Into Fresh Extraction Sites Using Single-Drilling Bur and Two Loading Procedures: Follow-Up Results.

Modern clinical protocols in implantology aim at shortening the treatment time and reducing duration and discomfort of the surgical phase, while maintaining optimal treatment outcomes. The purpose of this study was to evaluate clinical outcomes of implants immediately placed in extraction sites, using a single drilling step for implant site preparation. One-hundred thirty-three patients (mean age 55.3 ±â€Š12.7 [SD] years, range 20-83 years) were treated at 2 clinical centers. Two-hundred sixty-one implants were inserted in fresh postextraction sockets. One-hundred sixty-five implants were immediately loaded (IL) and 96 underwent delayed loading (DL). Implant survival, peri-implant bone level change and patients' satisfaction were assessed after at least 3 years of function. No patient dropout occurred. The mean follow-up was 63.61 ±â€Š11.52 months (range 39.71-85.71 months) from prosthesis delivery. Two IL and 1 DL implant failed in 3 patients. Implant survival was 98.8% and 99% for IL and DL group, respectively. The mean marginal bone loss after 1 year was 0.48 ±â€Š0.40 mm and 0.52 ±â€Š0.34 mm for IL and DL group. No biological nor mechanical complications occurred. All patients demonstrated full satisfaction. The present protocol with single burs for site preparation produced satisfactory clinical outcomes independent of the loading timing. Further long-term comparative studies are needed to confirm the present findings.

Clinical performance of a highly porous beta-TCP as the grafting material for maxillary sinus augmentation.

BACKGROUND: Beta-tricalcium phosphate (ß-TCP) is a synthetic bone substitute having high porosity and fast resorption. This retrospective study aimed at evaluating the effectiveness of an highly macroporous ß-TCP for maxillary sinus floor augmentation. METHODS: Twenty-seven consecutive patients (17 woman/10 men, mean age: 59.7 years) in 2 clinics underwent maxillary sinus augmentation by lateral approach using ß-TCP as grafting material. Implant survival, prosthesis success, periimplant bone loss, oral hygiene level, soft tissue condition, complication occurrence, and patient satisfaction were assessed. RESULTS: Thirty-one sinuses were successfully augmented. Sixty implants were placed. No sinus membrane perforations occurred. The mean follow-up after grafting was 39.3 ± 8.7 months (range, 22-52 months), and it was 30.5 ± 8.1 months (range, 15-43 months) after implant loading. No implants were lost. After 1 year of loading, marginal bone loss averaged -0.88 ± 0.46 mm (n = 54 implants). Mean full-mouth plaque and bleeding scores were 11.5% ± 4.8% and 3.5% ± 2.8%, respectively. No biological or mechanical complications were recorded. Patient satisfaction was very high. CONCLUSION: Despite limited sample size and follow-up duration, highly macroporous ß-TCP proved a valuable bone substitute for sinus augmentation, even when used alone.

New strategy for osseodensification during osteotomy in low-density bone: an in vitro experimental study.

The goal of this in vitro study was to evaluate and propose a new strategy for osseodensification technique using a drill counterclockwise to densification of bone of low density. Synthetic bone blocks of two different low densities (type III and IV) were used for the tests. The conventional drilling group (CD group) used Turbo-drill in a clockwise direction, and the osseodensification group (OD group) applied Turbo-drill in a counterclockwise direction. The applied tests were: (i) measurement of the temperature variation (ΔT) and (ii) measurement of the torque during the osteotomies, comparing the new strategy with the conventional drilling. Both groups were tested without (condition c1) and with (condition c2) irrigation, generating four subgroups: CDc1, CDc2, ODc1, and ODc2. Twenty osteotomies were made for each subgroup with a thermocouple positioned intra-bone (1 mm distant from the osteotomy) to measure the temperature produced. Other 20 samples/group were used to measure the torque value during each osteotomy in both synthetic bone density blocks. The mean of the ΔT during the osteotomies in type III bone was: 6.8 ± 1.26 °C for the CDc1 group, 9.5 ± 1.84 °C for the ODc1, 1.5 ± 1.35 °C for the CDc2, and 4.5 ± 1.43 °C for ODc2. Whereas, in the type IV bone, the ΔT was: 5.2 ± 1.30 °C for the CDc1 group, 7.0 ± 1.99 °C for the ODc1, 0.9 ± 1.05 °C for the CDc2, and 2.7 ± 1.30 °C for ODc2. The maximum torque during the osteotomies was: 8.8 ± 0.97 Ncm for CD samples and 11.6 ± 1.08 Ncm for OD samples in the type III bone; and 5.9 ± 0.99 Ncm for CD samples and 9.6 ± 1.29 Ncm for OD samples in the type IV bone. Statistical differences between the groups were detected in tests and conditions analyzed (p < 0.05). Using the drill counterclockwise for osseodensification in low-density bone generated a significantly greater torque of a drill than in CD and temperature variation during osteotomies. However, the temperature range displayed by the OD group was below critical levels that can cause damage to bone tissue.

WITHDRAWN: Immediate placement and provisionalization of implant-supported, single-tooth restorations: a retrospective study.

Immediate implant placement into extraction sockets has been widely reported in the dental literature, but few studies have evaluated the immediate loading of such implants. In this retrospective study, we evaluated 235 implants placed into fresh extraction sites utilizing a flapless technique, followed by immediate provisionalization with non-functional single-tooth restorations, and definitive restoration within 2 weeks. Cumulative survival and success rates were 98.8% (mean follow-up = 23.1 months). Periodontitis did not adversely influence the outcome. Within the limitations of this study, immediate implant placement and restoration followed by definitive loading within 2 weeks achieved outcomes comparable to those historically reported for delayed implants.

Development of a New Drill Design to Improve the Temperature Control during the Osteotomy for Dental Implants: A Comparative In Vitro Analysis.

The present in vitro study evaluated a new drill design to improve the temperature control during the osteotomies for dental implant installation, comparing with two drill designs that use conventional external irrigation. Three blocks of synthetic cortical bone were used for osteotomy procedures. Three groups were created: control group 1 (Con1), where a conical multiple drill system with a conventional external irrigation system was used; control group 2 (Con2), where a single bur with a conventional external irrigation system was used; and, test group (Test), where the new single bur (turbo drill) with a new irrigation system was used. Twenty osteotomies were made without irrigation and with intense irrigation, for each group. A thermocouple was used to measure the temperature produced during the osteotomies. The measured temperature were: 28.9 ± 1.68 °C for group Con1; 27.5 ± 1.32 °C for group Con2; 26.3 ± 1.28 °C for group Test. Whereas, the measured temperatures with irrigation were: 23.1 ± 1.27 °C for group Con1; 21.7 ± 1.36 °C for group Con2; 19.4 ± 1.29 °C for group Test. The single drill with a new design for improving the irrigation and temperature control, in comparison with the drill designs with conventional external irrigation.

Peri-Implant Bone Behavior after Single Drill versus Multiple Sequence for Osteotomy Drill.

OBJECTIVES: The present study aims to compare the drilling protocol effect on osseointegration event in three commercially available titanium dental implants with different drill protocol using a rabbit tibia model. MATERIALS AND METHODS: Three different drilling sequences were compared as follows: drilling sequence using a single unique drill of 4.2 mm conical implant (Group 1), drilling sequence using 3 consecutive cylindrical drills for a 4.1 mm cylindrical implant (Group 2), and drilling sequence using 3 consecutive conical drills for a 4.3 mm conical implant (Group 3). For each group, 18 drilling procedures and implant placements were performed, totalizing 54 commercially available titanium dental implants. The samples were removed 6 weeks after implantation. Resonance frequency analyses (RFA) were performed immediately after the implantation, and at 6 weeks removal torque test (RTt) and histological analysis were performed. RESULTS: The RFA measured showed statistical difference between the groups in time 1 and no significant statistical differences in time 2 (p > 0.05). In the RTt no significant difference was found between the 3 groups tested. Histomorphometric analysis showed no significant difference between groups in the bone-to-implant contact% (p > 0.05). CONCLUSION: In the present preclinical study, osteotomy using a single bur did not show differences regarding the proposed and evaluated tests parameters for assessing the peri-implant behavior.

Implant survival after preparation of the implant site using a single bur: a case series.

BACKGROUND: Implant site preparation usually consists of several consecutive drilling steps, performed using different burs with increasing diameter. PURPOSE: The purpose of the present study was to report the clinical outcomes of edentulous patients that underwent implant treatment, in which a special bur that allows preparation of the implant site in a single drilling step was used. MATERIAL AND METHODS: One hundred forty-nine patients (79 males, 70 females, mean age 51.8 ± 12.2 [SD] years, range 20-80 years) have been rehabilitated using different oral surgery procedures. A total of 350 implants were inserted (171 in the maxilla and 179 in the mandible). A barrier membrane was used for covering a total of 126 implants. Fifteen implants were placed by using the osteotome technique and 52 by using the lateral sinus lift procedure. Eighty-nine implants were placed in postextraction sockets. Thirty-six implants underwent immediate loading. Implant survival, peri-implant bone level change, and patients' satisfaction were the main variables assessed. RESULTS: No patient dropout occurred. The mean follow-up on a patient basis was 21.5 ± 3.1 months (range 12-27 months). A total of seven implant failures were recorded in six patients, leading to a mean implant survival of 98.0% (96.0% on a patient basis). The mean peri-implant bone loss after 1 year was 0.58 ± 0.44 mm (n = 282). Apart from implant failures, no biological nor mechanical complications occurred. All patients demonstrated full satisfaction. CONCLUSIONS: The use of a single bur for implant site preparation allows the reduction of the time needed for the surgical procedure, without compromising the clinical outcomes. Further, long-term comparative studies are needed to confirm the results of this study.

Temperature Changes in Cortical Bone after Implant Site Preparation Using a Single Bur versus Multiple Drilling Steps: An In Vitro Investigation.

OBJECTIVES: The study aims to test the hypothesis of no differences in temperature variation by using a single bur for implant site preparation as compared with conventional drilling sequence using multiple burs with incremental diameter. MATERIALS AND METHODS: Synthetic blocks of bone (type I density) were used for drilling procedures. THREE GROUPS WERE EVALUATED: Group 1 and Group 2 - drilling with three consecutive burs for a 4.1 mm cylindrical implant and for a 4.3 mm conical implant, respectively; Group 3 - drilling with a single bur for a 4.2 mm conical implant. For each group, 20 drilling procedures were performed without irrigation and 20 with external irrigation. The temperature in the cortical bone during osteotomy for implant site preparation was measured through a thermocouple. RESULTS: The mean temperatures and standard deviations for the drilling without irrigation were: 25.5 ± 1.24°C for Group 1; 28.1 ± 1.76°C for Group 2; 26.5 ± 1.79°C for Group 3. Considering the drilling with irrigation, the mean values and standard deviations were: 20.4 ± 1.17°C for Group 1; 22.2 ± 1.38°C for Group 2; 20.2 ± 0.83°C for Group 3. Groups 1 and 3 yielded similar results, while Group 2 displayed significantly higher temperature increase than the other two groups. CONCLUSIONS: The single bur drilling protocol did not produce greater bone heating than the conventional protocol and may be considered a safe procedure.

Endodontic surgery failure: SEM analysis of root-end filling.

This study investigated the quality of root-end filling in cases of periapical lesions persisting after endodontic surgery. Ten patients requiring extraction of an endodontically treated tooth were included. The root-ends of extracted teeth were examined by scanning electron microscopy. Defects at the interface between the root-end filling and cavity margin were classified as ideal, imperfect (some marginal disruption) or inadequate (continuous marginal disruption involving >30% of the interface). Four cases were scored as imperfect, and six were scored as inadequate. A defective apical seal could favour continuous leakage of surviving bacteria and their by-products from the infected root canal system to periapical tissues, thereby sustaining inflammation.