Influence of insular conditions on wing phenotypic variation in two dominant mosquito vectors, Aedes albopictus and Armigeres subalbatus (Diptera: Culicidae), in the border archipelagos of Thailand.

Insects geographically separated into island and mainland populations often exhibit phenotypic variations, a phenomenon known as insular conditions. These conditions can lead to rapid evolutionary changes that affect the morphological characteristics of mosquito vectors. Nevertheless, studies that specifically examine phenotype differences between island and mainland mosquito populations have been limited. In this study, wing variation in size and shape was investigated using the geometric morphometric (GM) technique in two dominant mosquito vectors, Aedes albopictus and Armigeres subalbatus, in the Ranong and Trat archipelagos of Thailand. Significant differences in average wing centroid size (CS) were found in 6 out of 15 population pairs for Ae. albopictus (p < 0.05) and in 5 population pairs for Ar. subalbatus (p < 0.05). After removing the allometric effect, canonical variate analyses (CVA) based on wing shape analysis revealed overlap across all populations for both Ae. albopictus and Ar. subalbatus. However, the statistical analysis indicated that Ar. subalbatus exhibited wing shape differences across all populations (p < 0.05), and most Ae. albopictus populations also displayed distinct wing shapes (p < 0.05), except for the populations from Chang Island and the mainland of Ranong, which showed no significant differences (p > 0.05). These findings enhance our understanding of mosquito adaptability in island regions and provide valuable data for the surveillance and monitoring of vector evolution.

Geometric morphometrics to differentiate species and explore seasonal variation in three Mansonia species (Diptera: Culicidae) in central Thailand and their association with meteorological factors.

Mansonia mosquito species are recognised as a significant vector of human pathogens, primarily transmitting the filarial nematode, Brugia malayi. In central Thailand, the three most prevalent Mansonia species are Mansonia annulifera, Mansonia indiana and Mansonia uniformis. This study explored the influence of seasonal changes on the phenotypic variation of these Mansonia species in central Thailand using the geometric morphometrics (GM). To ensure accurate species identification, we integrated GM techniques with DNA barcoding, examining distinctions in both phenotype and genotype among the species. The intraspecific genetic divergence ranged from 0.00% to 1.69%, whereas the interspecific genetic divergence ranged from 10.52% to 16.36%. The clear distinction between intra- and interspecific distances demonstrated the presence of a barcoding gap, confirming the successful differentiation of the three Mansonia mosquito species through DNA barcoding. Similarly, the interspecies GM assessment for classifying Mansonia species demonstrated a high degree of accuracy, with an overall performance of 98.12%. Exploring seasonal variation in the three Mansonia species revealed wing variations across different seasons, and pronounced variations appearing in the cool season. Regarding their association with meteorological factors, Ma. annulifera and Ma. uniformis showed significant positive correlations with temperature (p < 0.05), and Ma. uniformis also displayed a significant negative correlation with atmospheric pressure (p < 0.05). The insights from this study will deepen our understanding of the adaptive patterns of Mansonia mosquitoes in Thailand's central region, paving the way for enhanced disease surveillance related to these vectors.

Ctenocephalides orientis and Ctenocephalides felis in Thailand: Head geometry by species, sex and geography.

Fleas in the genus Ctenocephalides serve as biological vectors or intermediate hosts of microorganisms such as bacteria, rickettsia, protozoa and helminths. Ctenocephalides felis has a worldwide distribution, while C. orientis has long been considered as a subspecies of C. felis in Asia. To help the morphological recognition of these two species and further explore their differences, we used the geometric morphometric approach applied to the head. Both sexes were examined. Five anatomical landmarks of the head were used, and to capture the curvature of the front head, 10 semilandmarks were added. There was a consistent difference in species classification accuracy when considering landmarks only versus their combination with semilandmarks, suggesting the importance of the curve of the head as a taxonomic signal. Using or not the labels in the reclassification analyses, the head shape allowed by itself almost perfect recognition of the two species, in both sexes, even after adjustment for prior probabilities. The same approach disclosed a high level of sexual size and shape dimorphism in both species. The contribution of size variation to the discrimination by shape was much more important between sexes (from 27% to 45%) than between species (from 0.7% to 7.1%). Nevertheless, in our data, size never could represent a way to reliably recognise the sex of an individual, even less its species. Geographical variation in head shape could only be explored for the C. orientis sample. No significant correlation of morphometric variation with geography could be detected, which would be consistent with gene flow between Thai provinces. The geometric morphometric approach of the flea head, when it incorporates head curves, is a promising tool for rapid, economical, and accurate species and sex identification. It is, therefore, a useful tool for future epidemiological and demographic studies.

Island mosquitoes of Thailand: an update on species diversity and DNA barcoding.

Mosquitoes (Diptera: Culicidae) are among the most medically significant insects, with several species acting as vectors for human pathogens. Although there are frequent reports of mosquito-borne diseases in the border island areas of Thailand, comprehensive data on the diversity and DNA barcoding of these mosquito species remain limited. This study investigated mosquito diversity in two main archipelagos in Thailand-the Trat archipelago (comprising Chang Island and Kood Island) and the Ranong archipelago (comprising Chang Island and Phayam Island)-and generated DNA barcode data from the mosquitoes found there. The survey across these islands discovered a total of 41 species, highlighting the presence of several species known to be vectors for human diseases. Thirty-seven mosquito species from the island areas were documented to provide reference DNA barcode sequences for mosquitoes in Thailand's island regions. Two species, Aedes fumidus and Finlaya flavipennis, have been added as new COI sequence records in the database. DNA barcoding was highly effective in classifying almost all species by identifying barcoding gaps, except for Anopheles baimaii and Anopheles dirus, which could not be distinguished. Additionally, the study noted that geographical variations might influence certain mosquito species, such as Anopheles barbirostris A3 and Mansonia dives, causing them to be split into two distinct subgroups. The findings of this study are crucial, as they aid in classifying mosquito species using molecular techniques and expand our knowledge of disease vectors in these biodiverse regions.

Insights into the mitochondrial cytochrome oxidase I (mt-COI) gene and wing morphometrics of Anopheles baimaii (Diptera: Culicidae) in malaria-endemic islands of Thailand.

Anopheles baimaii (Diptera: Culicidae) significantly contributes to the transmission of parasites causing malaria in Southeast Asia and South Asia. This study examined the morphological (wing shape) and molecular (mitochondrial gene) variations of An. baimaii in four of Thailand's border islands, and also investigated the presence of Plasmodium parasites in these mosquitoes. No Plasmodium infections were detected in the samples. Significant differences in wing shape were observed in most island populations (p < 0.05). A single-linkage tree, constructed using Mahalanobis distances, clustered the populations into two groups based on geographical locations. Genetic variation in An. baimaii was also analyzed through cytochrome c oxidase subunit I (COI) gene sequences. This analysis identified 22 segregating sites and a low nucleotide diversity of 0.004. Furthermore, 18 distinct haplotypes were identified, indicating a high haplotype diversity of 0.825. Neutrality tests for the overall population revealed a significantly negative Fu's Fs value (-5.029), indicating a population expansion. In contrast, Tajima's D yielded a negative value (-1.028) that did not reach statistical significance. The mismatch distribution analysis exhibited a bimodal pattern, and the raggedness index was 0.068, showing no significant discrepancy (p = 0.485) between observed and expected distributions. Pairwise genetic differentiation assessments demonstrated significant differences between all populations (p < 0.05). These findings provide valuable insights into the COI gene and wing morphometric variations in An. baimaii across Thailand's islands, offering critical information for understanding the adaptations of this malaria vector and guiding future comprehensive research.

Integrating wing morphometrics and mitochondrial DNA analysis to assess the filaria vector Mansonia uniformis (Diptera: Culicidae) populations in Thailand.

Mansonia uniformis (Diptera: Culicidae) is recognized as a vector of Brugia malayi and has been reported to transmit Wuchereria bancrofti, both causing lymphatic filariasis in humans. This study employed geometric morphometrics (GM) to investigate wing shape variation and analyzed genetic diversity through cytochrome c oxidase subunit 1 (COI) gene analyses in Ma. uniformis populations across Thailand. Wing GM analyses indicated significant differences in wing shape based on Mahalanobis distances among nearly all population pairs (p < 0.05), with no significant correlation between wing shape and geographic distance (r = 0.210, p > 0.05). Genetic analyses identified 63 haplotypes and 49 polymorphic sites, with the overall population exhibiting a nucleotide diversity of 0.006 (± 0.001) and a haplotype diversity of 0.912 (± 0.017). Deviations from neutrality, as indicated by Tajima's D and Fu's FS tests for the overall Ma. uniformis populations in Thailand, were statistically significant and negative, suggesting population expansion (both p < 0.05). Analysis of molecular variance revealed no significant genetic structure when all populations were categorized based on collection sites and geographic regions. However, significant differences in FST values were observed between some populations. These findings enhance our understanding of the geographical and genetic factors influencing Ma. uniformis populations, which are crucial for developing effective control strategies in Thailand.

A novel use of a geometric morphometric technique to distinguish human parasite eggs of twelve different species.

Copro-microscopic diagnostic methods are the most common approach for screening patients with parasitic infections. However, expertise is required to identify helminthic eggs from fecal specimens. Consequently, new methods are required to support accurate species identification. Novel technologies have recently been developed for the classification of organisms, including geometric morphometric (GM) approaches. In this study, the outline-based GM approach was used to distinguish the eggs of 12 common human parasite species, including Ascaris lumbricoides, Trichuris trichiura, Enterobius vermicularis, hookworm, Capillaria philippinensis, Opisthorchis spp., Fasciola spp., Paragonimus spp., Schistosoma mekongi, Taenia spp., Hymenolepis diminuta and Hymenolepis nana. The GM analysis revealed that the size cannot be used as the main variable in the identification of parasite species at the egg stage, producing only 30.18% overall accuracy. However, comparisons of shape based on the Mahalanobis distances between pairs of parasite species showed significant differences in all pairs (p < 0.05). The shape analysis produced 84.29% overall accuracy. This is the first time that outline-based GM has been preliminarily confirmed as a valuable approach to support copro-microscopic analysis, in order to effectively screen helminth eggs. However, further studies with a larger set of helminth eggs and artefacts should be carried out to increase confidence in the identification of parasite species in the absence of local experts.

Intraspecific Genetic Variation of Anisakis typica in Indian Mackerel Caught from the Gulf of Thailand, Samut Songkhram Province.

Anisakis nematodes infecting Indian mackerel (Rastrelliger kanagurta) were initially discovered in Thailand in our preliminary investigation. Nevertheless, the species of Anisakis collected has not been determined nor has its genetic variation been researched. Thus, this study aimed to molecularly identify the species of Anisakis specimens using the internal transcribed spacer (ITS) region of ribosomal DNA sequences. In addition, the intraspecific genetic variation was also determined using mitochondrial cytochrome oxidase subunit II (COII) gene sequences. The phylogenetic relationships of the ITS region classified all samples into Anisakis typica; however, the genetic variation between them could not be distinguished. By contrast, the phylogenetic tree analysis of the COII region identified all samples as A. typica, with 17 different haplotypes by 66 polymorphic sites and five of the substitutions resulted in amino acid change. Additionally, the distribution pattern of the COII region can be separated into two groups between South America and Asian countries. All our haplotypes belong to Asian countries. Compared with the two genetic markers used in this investigation, COII appears to be a better candidate for studying genetic variation sensitive to environmental changes and intermediate or definitive host behavioral changes.

Development of a More Effective Mosquito Trapping Box for Vector Control.

Mosquito-borne diseases are a major public health issue in nearly all tropical and subtropical countries, making vector control imperative. The mosquito trapping box is one type of mosquito traps that is popular in some areas because it is affordable, environmentally friendly, and easy to produce. This research investigated whether the effectiveness of the mosquito trapping box could be increased through the addition of various physical factors, including a wooden frame, black cotton cloth, a fan, carbon dioxide (CO2), and heat, by testing a range of box designs in the Samut Songkhram Province, Thailand, between December 2016 and January 2017. We found that trapping boxes constructed with Pinus kesiya wood caught more mosquitoes than those constructed with two other types of wood or aluminum. We also found that mosquito trapping boxes were more effective when more factors were added, although these differences were only significant for black cotton cloth and CO2. These findings will guide the future development of mosquito trapping boxes for effective mosquito control in other areas, helping to reduce the incidence of mosquito-borne diseases.

Environmental Factors Associated with Mosquito Vector Larvae in a Malaria-Endemic Area in Ratchaburi Province, Thailand.

Malaria is transmitted by female mosquitoes in the genus Anopheles and is a major public health issue. Different species of Anopheles mosquitoes have different epidemiological characteristics, behaviors, and ecological requirements, and so an understanding of their biology and ecology in a particular area is critical for successful disease control. The aim of this study was to determine which environmental factors are associated with Anopheles larvae in a malaria-endemic area in Ratchaburi Province, Thailand, which shares a border with Myanmar. In October 2016, we collected mosquito larvae and measured six environmental factors at 10 study sites located along Lam Pachi River, which flows through Huay Nam Nak village in Ratchaburi Province. We found two species of Anopheles larvae (An. subpictus sensu lato (s.l.) Grassi and An. barbirostris s.l. van der Wulp) at 7 of the 10 study sites, the numbers of which significantly differed between sites (p < 0.05). Pearson correlation analysis showed that the numbers of larvae of both species were significantly positively correlated with the dissolved oxygen level (p < 0.01) and significantly negatively correlated with the width of the river (p < 0.05) and pH (p < 0.01). By contrast, turbidity, water depth, and water temperature were not associated with larval abundance. Mosquito species which belong to genus Anopheles are considered to be of public health and medical importance. Therefore, Anopheles mosquito surveillance and control in the study sites are essential. This information will facilitate vector-borne disease control and improve our understanding of the biology of Anopheles vectors in rivers located along international borders, further reducing the number of patients in this malaria-endemic area.

Population genetic structure and wing geometric morphometrics of the filarial vector Armigeres subalbatus (Diptera: Culicidae) in Thailand.

Armigeres subalbatus (Diptera: Culicidae) is a mosquito species of significant medical and veterinary importance. It is widely distributed across Southeast and East Asia and is commonly found throughout Thailand. This study assessed the genetic diversity and population structure of Ar. subalbatus in Thailand using the cytochrome c oxidase subunit I (COI) gene sequences. Additionally, wing shape variations among these populations were examined using geometric morphometrics (GM). Our results demonstrated that the overall haplotype diversity (Hd) was 0.634, and the nucleotide diversity (π) was 0.0019. Significant negative values in neutrality tests (p < 0.05) indicate that the Ar. subalbatus populations in Thailand are undergoing a phase of expansion following a bottleneck event. The mismatch distribution test suggests that the populations may have started expanding approximately 16,678 years ago. Pairwise genetic differentiation among the 12 populations based on Fst revealed significant differences in 32 pairs (p < 0.05), with the degree of differentiation ranging from 0.000 to 0.419. The GM analysis of wing shape also indicated significant differences in nearly all pairs (p < 0.05), except for between populations from Nakhon Pathom and Samut Songkhram, and between those from Chiang Mai and Mae Hong Son, suggesting no significant difference due to their similar environmental settings. These findings enhance our understanding of the population structure and phenotypic adaptations of mosquito vectors, providing vital insights for the formulation of more efficacious vector control strategies.

Evaluation of the wing cell contour to distinguish between Stomoxys bengalensis and Stomoxys sitiens (Diptera: Muscidae) using outline-based morphometrics.

The blood-sucking flies of the genus Stomoxys Geoffroy, 1762 (Diptera: Muscidae) are significant ectoparasites that can cause irritation and transmit pathogens to both animals and humans. Within the genus Stomoxys, two species, Stomoxys bengalensis and Stomoxys sitiens, have similar morphology and coexist in the same habitat. Accurate species identification of these flies is crucial for understanding disease vectors and implementing effective control measures. In this study, we assessed the effectiveness of outline-based geometric morphometrics (GM) by analyzing the wing cell contour of the first posterior cell (R5) to distinguish between species and sexes of S. bengalensis and S. sitiens. Our results demonstrate that the outline-based GM method is highly effective in distinguishing between species and sexes of these flies based on contour shape, with accuracy scores ranging from 90.0% to 97.5%. Therefore, outline-based GM emerges as a promising alternative to landmark-based GM or as a supplementary tool in conjunction with traditional morphology-based methods for species identification.

First insights into using outline-based geometric morphometrics of wing cell contours to distinguish three morphologically similar species of Tabanus (Diptera: Tabanidae).

Accurate species identification of horse flies (Diptera: Tabanidae) is crucial due to their role as vectors for various pathogens, which is essential for understanding their biology, devising strategies to control their populations, and enhancing disease surveillance. This study assessed the efficacy of outline-based geometric morphometrics (GM) by analyzing the wing cell contours of discal, first submarginal, and second submarginal cells to distinguish three morphologically similar Tabanus species commonly found in Thailand, T. megalops, T. rubidus, and T. striatus. Statistical analysis demonstrated significant size differences between T. rubidus and the two other species (P < 0.05), with T. rubidus exhibiting larger wing cells. Tabanus megalops and T. striatus had similar sizes; their size differences were not statistically significant. The accuracy of size analysis based on validated classification tests was relatively low, ranging from 64.67% to 68.67%. Nonetheless, all wing cell contours showed significant shape differences between the three species, as confirmed by Mahalanobis distance comparisons using 1000 permutation tests (P < 0.05). The shape of the first submarginal cell contour showed the highest classification accuracy (86.67%). Outline-based GM offers a significant advantage for analyzing fly specimens with incomplete wings that have intact cells. For damaged specimens, analyzing the contour of the first submarginal cell through this technique can be a viable alternative.

Outline-based geometric morphometrics: Wing cell differences for mosquito vector classification in the Tanaosri mountain range, Thailand.

Recent studies have revealed taxonomic signals within the wing cells of certain mosquito species. In our study, wing cell differentiation among mosquito vectors from the Tanaosri mountain range in Thailand was evaluated using the outline-based geometric morphometric (GM) approach. Our focus was on four specific wing cells for GM analysis: the wing contour (external cell), the second submarginal cell (internal cell 1), the first posterior cell (internal cell 2), and the third posterior cell (internal cell 3). Before proceeding with the GM approach, the identity of seven mosquito genera and 21 species was confirmed using molecular techniques. Our validated classification tests demonstrated that the performance of mosquito species classification varies according to genus. Notably, three Aedes species exhibited the highest accuracy for both internal cell 2 and internal cell 3, each registering a score of 93.20 %. In the case of two Mansonia species, the wing contour displayed a remarkable accuracy of 98.57 %. Consequently, we suggest the use of the outline-based GM approach, particularly focusing on the wing contour, for differentiating Mansonia annulifera and Mansonia uniformis. In contrast, the highest accuracy for classifying Culex species was found in internal cell 1, at 75.51 %, highlighting the challenges due to similarities in wing cells within this genus. These findings provide a guideline for future applications of the outline-based GM approach, focusing on wing cells, as an alternative method to classify mosquito vector species.

Wing geometric morphometrics and DNA barcoding to distinguish three closely related species of Armigeres mosquitoes (Diptera: Culicidae) in Thailand.

Armigeres subalbatus, a mosquito species widely found in Thailand and other Asian countries, serves as a vector for filarial parasites, affecting both humans and animals. However, the surveillance of this vector is complicated because of its morphological similarity to two other species, Armigeres dohami and Armigeres kesseli. To differentiate these morphologically similar species, our study employed both wing geometric morphometrics (GM) and DNA barcoding, offering a comprehensive approach to accurately identify these closely related Armigeres species in Thailand. Our GM analyses based on shape demonstrated significant accuracy in differentiating Armigeres species. Specifically, the outline-based GM method focusing on the 3rd posterior cell exhibited an accuracy rate of 82.61%, closely followed by the landmark-based GM method with 81.54%. Both these GM techniques effectively distinguished Ar. subalbatus from Ar. dohami and Ar. kesseli. Regarding DNA barcoding, our investigation of pairwise intra- and interspecific divergences revealed a "barcoding gap". Furthermore, the results of species confirmation using both species delimitation methods including the automatic barcode gap discovery method (ABGD) and the Multi-rate Poisson tree process (mPTP) were consistent with those of morphological identification, sequence comparisons with the GenBank and Barcode of Life Data System (BOLD) databases, and the neighbor-joining tree construction. These consistent results emphasize the efficacy of DNA barcoding in the precise identification of Armigeres species.

Investigating the impact of climate and seasonality on mosquito (Diptera: Culicidae) vector populations in the connecting areas of the Tenasserim range forests in Thailand.

Mosquito-borne diseases pose a significant public health challenge globally. Our study focused on the seasonal diversity of mosquito species in the connecting areas of the Tenasserim (also known as Tanaosri) range forests in Thailand. Additionally, we employed the geometric morphometric technique to assess variations in wing size and shape among five predominant mosquito species. Throughout the study period, we collected a total of 9,522 mosquitoes, encompassing 42 species across eight genera. In these connecting areas of forests, the Simpson index and Shannon species diversity index were recorded at 0.86 and 2.36, respectively, indicating a high level of mosquito diversity. Our analysis using the Analysis of Similarities (ANOSIM) test showed significant seasonal differences in mosquito communities, with an R-value of 0.30 (p < 0.05) in the lower connecting areas and 0.37 (p < 0.05) in the upper connecting areas. Additionally, canonical correspondence analyses showed that the abundance of each mosquito species is influenced by various climate factors. Phenotypic analyses of wing size and shape have deepened our understanding of local adaptation and the seasonal pressures impacting these vectors. Notably, most species exhibited larger wing sizes in the dry season compared to other seasons. Additionally, seasonal assessments of wing shape in five predominant mosquito species revealed significant differences across seasonal populations (p < 0.05). Ongoing monitoring of these populations is crucial to enhancing our understanding of the seasonal effects on mosquito abundance and physiological adaptations. These insights are essential for developing more effective strategies to manage mosquito-borne diseases.

Genetic and morphometric differentiation between two morphs of Haematobosca sanguinolenta (Diptera: Muscidae) from Thailand.

Haematobosca is a genus of biting fly within the subfamily Stomoxyinae of the family Muscidae. It is currently recognized to include 16 species worldwide. These species, acting as ectoparasites, are considered to have significant importance in the veterinary and medical fields. To address the color polymorphism related to the genus Haematobosca in Thailand, herein, we focused on the normal (legs mainly black) and yellow (legs mainly yellow) morphs of Haematobosca sanguinolenta and examined them for genetic differences using three molecular markers: the cytochrome c oxidase subunit 1 (cox1) and cytochrome b (cytb) genes from the mitochondrial genome as well as the internal transcribed spacer 2 (ITS2) region from the nuclear ribosomal DNA. In addition, we analyzed wing differences between the two morphs using geometric morphometrics (GM). The genetic divergences between the two morphs showed that cytb gene showed the greatest divergence, for which the average distance was 5.6%. This was followed by the combination of cox1-cytb-ITS2, exhibiting an average divergence of 4.5%, ITS2 with a divergence of 4.1%, and finally cox1, showing the lowest divergence of 3.5%. Phylogenetic analyses distinctly separated the two morphs of H. sanguinolenta; this separation was supported by high bootstrap values (97-100%). These results were further corroborated by three species delimitation methods, i.e. assemble species by automatic partitioning (ASAP), automated barcode gap discovery (ABGD), and Poisson tree processes (PTP), all of which suggested that the two morphs likely represent separate species. In addition, a GM study identified a statistically significant difference in wing shape between the two morphs of H. sanguinolenta (P < 0.05). This combination of genetic and morphometric results strongly supports the existence of two distinct species within H. sanguinolenta in Thailand.

Demographic inference from the mt-DNA COI gene and wing geometry of Culex gelidus (Diptera: Culicidae), an important vector of Japanese encephalitis in Thailand.

Culex gelidus (Diptera: Culicidae), an important vector of the Japanese encephalitis virus (JEV), contributes to human viral encephalitis in many Asian countries, including Thailand. This study represents the first investigation of the demographic patterns of Cx. gelidus populations in Thailand using cytochrome c oxidase subunit I (COI) gene analysis and wing geometric morphometrics (GM). Mosquitoes were collected from 10 provinces across six regions of Thailand in 2022. Analysis of the COI sequences (n = 182) indicated high haplotype diversity (0.882) and low nucleotide diversity (0.006), with 72 haplotypes identified. The haplotype network demonstrated no profound splits among the geographic populations. Neutral tests, including Tajima's D and Fu's Fs, displayed negative values, with a significant result observed for Fu's Fs (-33.048, p < 0.05). The mismatch distribution analysis indicated that the population does not statistically deviate from a model of sudden population expansion (SSD = 0.010, p > 0.05; Rg = 0.022, p > 0.05). The estimations suggest that the Cx. gelidus population in Thailand began its expansion approximately between 459,243 and 707,011 years ago. The Mantel test showed no significant relationship between genetic and geographic distances (r = 0.048, p > 0.05). Significant phenotypic differences (based on wing shape) were observed among most populations. Additionally, in this study, we found no significant relationships between phenotypic and genetic distances (r = 0.250, p > 0.05). Understanding the genetic and morphological dynamics of Cx. gelidus is vital for developing targeted surveillance and vector control measures. This knowledge will also help to predict how future environmental changes might affect these populations, thereby informing long-term vector management strategies.

Intraspecific sensilla dimorphism in Ascoschoengastia indica (Prostigmata, Trombiculidae).

Ascoschoengastia indica is one of the dominant chigger species in Southeast Asia and a potential carrier of scrub typhus, due in part to its cosmopolitan nature. This study explored the possible biological significance of the observed dimorphism in the shape of its scutum sensilla. Sensilla are specialized structures that are generally adapted to perform specific functions related to sensory capabilities, so their shape and sizes are expected to vary between taxa. We describe morphological variation of the sensilla of A. indica in Thailand. The sensilla had either a round or an ovoid, club-shaped form, which was not dependent on the particularly locality or host. Ignoring the precise function of the sensilla and their morphological variation, our study attempted to answer the following single question: Do the distinct forms of the sensilla indicate possible heterogeneity of the A. indica species? The two forms, named S1 and S2, were compared by genetic and morphometric techniques. The genetic analysis was based on the COI sequences, while the morphometric comparison used the scutum, an organ shown to be of taxonomic value for chigger mites. Neither morphometric nor genetic data revealed any evidence of a speciation process underlying the morphological variation in sensillum types.

Seroprevalence study in humans and molecular detection in Rhipicephalus sanguineus ticks of severe fever with thrombocytopenia syndrome virus in Thailand.

Severe fever with thrombocytopenia syndrome virus (SFTSV) is an emerging tick-borne virus with a mortality rate of up to 30%. First identified in China in 2009, it was later reported in other Asian countries, including Thailand in 2020. SFTSV has been detected in several tick species, including Rhipicephalus sanguineus, known for infesting dogs. We conducted a seroprevalence study of SFTSV in Bangkok and Nong Khai, Thailand, by analyzing 1162 human samples collected between 2019 and 2023. The testing method relied on IgG detection using ELISA and confirmed though a virus seroneutralization test. The results indicated that out of the participants, 12 (1.1%) tested positive for anti-SFTSV IgG antibodies; however, none exhibited positive results in the seroneutralization assay. Additionally, molecular detection of SFTSV, Crimean-Congo hemorrhagic fever (CCHF), Coxiella spp., Bartonella spp., and Rickettsia spp. was performed on 433 Rh. sanguineus ticks collected from 49 dogs in 2023 in Chachoengsao Province, Thailand. No evidence of these pathogens was found in ticks. These findings highlight the importance of exploring viral cross-reactivity. Furthermore, it is important to conduct additional studies to isolate SFTSV from animals and ticks in order to identify the potential transmission routes contributing to human and animal infections in Thailand.