Partial-Interpenetration-Controlled UiO-Type Metal-Organic Framework and its Catalytic Activity.

An unprecedented correlation between the catalytic activity of a Zr-based UiO-type metal-organic framework (MOF) and its degree of interpenetration (DOI) is reported. The DOI of an MOF is hard to control owing to the high-energy penalty required to construct a partially interpenetrated structure. Surprisingly, strong interactions between building blocks (inter-ligand hydrogen bonding) facilitate the formation of partially interpenetrated structures under carefully regulated synthesis conditions. Moreover, catalytic conversion rates for cyanosilylation and Knoevenagel condensation reactions are found to be proportional to the DOI of the MOF. Among MOFs with DOIs in the 0-100% range, that with a DOI of 87% is the most catalytically active. Framework interpenetration is known to lower catalytic performance by impeding reactant diffusion. A higher effective reactant concentration due to tight inclusion in the interpenetrated region is possibly responsible for this inverted result.

Site-Differentiated MnIIFeII Complex Reproducing the Selective Assembly of Biological Heterobimetallic Mn/Fe Cofactors.

Class Ic ribonucleotide reductases (RNRIc) and R2-like ligand-binding oxidases (R2lox) are known to contain heterobimetallic MnIIFeII cofactors. How these enzymes assemble MnIIFeII cofactors has been a long-standing puzzle due to the weaker binding affinity of MnII versus FeII. In addition, the heterobimetallic selectivity of RNRIc and R2lox has yet to be reproduced with coordination complexes, leading to the hypothesis that RNRIc and R2lox overcome the thermodynamic preference for coordination of FeII over MnII with their carefully constructed three-dimensional protein structures. Herein, we report the selective formation of a heterobimetallic MnIIFeII complex accomplished in the absence of a protein scaffold. Treatment of the ligand Py4DMcT (L) with equimolar amounts of FeII and MnII along with two equivalents of acetate (OAc) affords [LMnIIFeII (OAc)2(OTf)]+ (MnIIFeII) in 80% yield, while the diiron complex [LFeIIFeII(OAc)2(OTf)]+ (FeIIFeII) is produced in only 8% yield. The formation of MnIIFeII is favored regardless of the order of addition of FeII and MnII sources. X-ray diffraction (XRD) of single crystals of MnIIFeII reveals an unsymmetrically coordinated carboxylate ligand─a primary coordination sphere feature shared by both RNRIc and R2lox that differentiates the two metal binding sites. Anomalous XRD studies confirm that MnIIFeII exhibits the same site selectivity as R2lox and RNRIc, with the FeII (d6) center preferentially occupying the distorted octahedral site. We conclude that the successful assembly of MnIIFeII originates from (1) Fe-deficient conditions, (2) site differentiation, and (3) the inability of ligand L to house a dimanganese complex.

Sr(Ag1-x Lix )2 Se2 and [Sr3 Se2 ][(Ag1-x Lix )2 Se2 ] Tunable Direct Band Gap Semiconductors.

Synthesizing solids in molten fluxes enables the rapid diffusion of soluble species at temperatures lower than in solid-state reactions, leading to crystal formation of kinetically stable compounds. In this study, we demonstrate the effectiveness of mixed hydroxide and halide fluxes in synthesizing complex Sr/Ag/Se in mixed LiOH/LiCl. We have accessed a series of two-dimensional Sr(Ag1-x Lix )2 Se2 layered phases. With increased LiOH/LiCl ratio or reaction temperature, Li partially substituted Ag to form solid solutions of Sr(Ag1-x Lix )2 Se2 with x up to 0.45. In addition, a new type of intergrowth compound [Sr3 Se2 ][(Ag1-x Lix )2 Se2 ] was synthesized upon further reaction of Sr(Ag1-x Lix )2 Se2 with SrSe. Both Sr(Ag1-x Lix )2 Se2 and [Sr3 Se2 ][(Ag1-x Lix )2 Se2 ] exhibit a direct band gap, which increases with increasing Li substitution (x). Therefore, the band gap of Sr(Ag1-x Lix )2 Se2 can be precisely tuned via fine-tuning x that is controlled by only the flux ratio and temperature.

Rapid Cs+ Capture via Multiple Supramolecular Interactions in Anionic Metal-Organic Framework Isomers.

Metal-organic frameworks (MOFs) provide an ideal platform for ion exchange due to their high porosity and structural designability; however, developing MOFs that have the essential characteristics for ion exchange remains a challenge. These crucial features include fast kinetics, selectivity, and stability. We present two anionic isomers, DGIST-2 (2D) and DGIST-3 (3D), comprising distinctly arranged 5-(1,8-naphthalimido)isophthalate ligands and In3+ cations. Interestingly, in protic solvents, DGIST-2 transforms into a hydrolytically stable crystalline phase, DGIST-2'. DGIST-2' and DGIST-3 exhibit rapid Cs+ adsorption kinetics, as well as high Cs+ affinity in the presence of competing cations. The mechanism for rapid and selective sorption is explored based on the results of single-crystal X-ray diffraction analysis of Cs+-incorporated DGIST-3. In Cs+-containing solutions, the loosely incorporated dimethylammonium countercation of the anionic framework is replaced by Cs+, which is held in the hydrophobic cavity by supramolecular ion-ion and cation-π interactions.

Mechanochemistry of Group 4 Element-Based Metal-Organic Frameworks.

Mechanochemical synthesis is emerging as an environmentally friendly yet efficient approach to preparing metal-organic frameworks (MOFs). Herein, we report our systematic investigation on the mechanochemical syntheses of Group 4 element-based MOFs. The developed mechanochemistry allows us to synthesize a family of Hf4O4(OH)4(OOC)12-based MOFs. Integrating [Zr6O4(OH)4(OAc)12]2 and [Hf6O4(OH)4(OAc)12]2 under the mechanochemical conditions leads to a unique family of cluster-precise multimetallic MOFs that cannot be accessed by the conventional solvothermal synthesis. Extensive efforts have not yielded an effective pathway for preparing TiIV-derived MOFs, tentatively because of the relatively low Ti-O bond dissociation energy.

Stimuli-Responsive Ti-Organic Gels and Aerogels Derived from Ti-Oxo Clusters: Hierarchical Porosity and Photocatalytic Activity.

Herein, we report titanium-organic gels (TOGs) as new Ti-oxo-based materials that exhibit stimuli-responsive sol-gel transformations and hierarchical porosity upon the removal of solvent molecules. Heating a solution of Ti-oxo clusters and pyromellitic acid as a tetratopic ligand produces TOGs that readily become sols by applying physical stimuli such as shaking or vortexing under ambient conditions. Porous titanium-organic aerogels (TOAs) were obtained by the CO2 supercritical point drying (CPD) of the TOGs, and their porous structures were characterized by N2 adsorption and desorption isotherm measurements. These TOAs, based on the Ti-oxo clusters, possess hierarchical micro-, meso-, and macropores. Furthermore, accompanying the prominent photochromic phenomena, reduction of Ti4+ to Ti3+ was observed upon UV irradiation. The TOAs were successfully applied in the adsorption and photocatalytic degradation of several dye molecules. This research introduces a versatile method for preparing stimuli-responsive and porous Ti-oxo-based photocatalysts.

Titanium-Carboxylate Metal-Organic Framework Based on an Unprecedented Ti-Oxo Chain Cluster.

Titanium(IV)-based metal-organic frameworks (Ti-MOFs) have received significant attention in recent years due to their numerous photocatalytic applications. We herein prepare the single-crystalline Ti-carboxylate MOF (DGIST-1) composed of an unprecedented Ti-oxo chain cluster and the porphyrinic ligand, TCPP (tetrakis(4-carboxyphenyl)porphyrin). Preformed Ti-oxo clusters were used as Ti4+ sources to avoid the spontaneous hydrolysis and condensation reactions of traditional Ti-alkoxide precursors, thus, enabling the formation of the highly crystalline Ti-MOF. The successfully activated DGIST-1 exhibited a higher surface area (i.e., 1957.3 m2 g-1 ) than previously reported Ti-MOFs due to its high crystallinity. Furthermore, the visible-light-responsive photocatalytic activity of DGIST-1 was confirmed by the simultaneous generation of singlet oxygen (1 O2 ) and superoxide (. O2 - ) species, in addition to the highly efficient and selective oxidation of benzyl alcohol to benzaldehyde.

Controlled Intercalation and Chemical Exfoliation of Layered Metal-Organic Frameworks Using a Chemically Labile Intercalating Agent.

Creating ordered two-dimensional (2D) metal-organic framework (MOF) nanosheets has attracted extensive interest. However, it still remains a great challenge to synthesize ultrathin 2D MOF nanosheets with controlled thickness in high yields. In this work, we demonstrate a novel intercalation and chemical exfoliation approach to obtain MOF nanosheets from intrinsically layered MOF crystals. This approach involves two steps: first, layered porphyrinic MOF crystals are intercalated with 4,4'-dipyridyl disulfide through coordination bonding with the metal nodes; subsequently, selective cleavage of the disulfide bond induces exfoliation of the intercalated MOF crystals, leading to individual freestanding MOF nanosheets. This chemical exfoliation process can proceed efficiently at room temperature to produce ultrathin (∼1 nm) 2D MOF nanosheets in ∼57% overall yield. The obtained ultrathin nanosheets exhibit efficient and far superior heterogeneous photocatalysis performance compared with the corresponding bulk MOF.

Thermodynamically Guided Synthesis of Mixed-Linker Zr-MOFs with Enhanced Tunability.

Guided by thermodynamics, we have synthesized two mixed-linker zirconium-based metal-organic frameworks (Zr-MOFs), namely, PCN-133 and PCN-134. Both of them possess a layer-pillar structure, in which the connection between Zr6 clusters and primary BTB linkers form a (3,6)-connected kdg layer that is further extended into 3D frameworks by auxiliary DCDPS/TCPP linkers (BTB = benzene tribenzoate, DCDPS = 4,4'-dicarboxydiphenyl sulfone, TCPP = tetrakis(4-carboxyphenyl)porphyrin). PCN-134 demonstrates high porosity (N2 uptake of 717 cm(3)·g(-1) and BET surface area of 1946 cm(2)·g(-1)) and excellent chemical stability in aqueous solutions with pH values ranging from 0 to 13. More importantly, PCN-134 tolerates the partial absence of auxiliary linkers leading to structural defects during the assembly process while preserving its framework integrity. Furthermore, the defect density can be systematically controlled by tuning the occupancy of the auxiliary linker, which in turn affects the MOF properties. For instance, the dichromate uptake of PCN-134 is tuned by adjusting the BTB/TCPP ratios, which gives rise to an efficient dichromate absorbent when the TCPP molar ratio in linkers is set as 22%. In addition, the photocatalytic reduction of Cr(VI) in aqueous solution was also performed by PCN-134-22%TCPP which exhibits excellent catalytic activity. This work not only opens up a new synthetic route toward mixed-linker MOFs, but also provides tunable control of MOF defects and, in turn, the properties.

Linker Installation: Engineering Pore Environment with Precisely Placed Functionalities in Zirconium MOFs.

Precise placement of multiple functional groups in a highly ordered metal-organic framework (MOF) platform allows the tailoring of the pore environment, which is required for advanced applications. To realize this, we present a comprehensive study on the linker installation method, in which a stable MOF with coordinatively unsaturated Zr6 clusters was employed and linkers bearing different functional groups were postsynthetically installed. A Zr-MOF with inherent missing linker sites, namely, PCN-700, was initially constructed under kinetic control. Twelve linkers with different substituents were then designed to study their effect on MOF formation kinetics and therefore resulting MOF structures. Guided by the geometrical analysis, linkers with different lengths were installed into a parent PCN-700, giving rise to 11 new MOFs and each bearing up to three different functional groups in predefined positions. Systematic variation of the pore volume and decoration of pore environment were realized by linker installation, which resulted in synergistic effects including an enhancement of H2 adsorption capacities of up to 57%. In addition, a size-selective catalytic system for aerobic alcohol oxidation reaction is built in PCN-700 through linker installation, which shows high activity and tunable size selectivity. Altogether, these results exemplify the capability of the linker installation method in the pore environment engineering of stable MOFs with multiple functional groups, giving an unparalleled level of control.

Flexible Zirconium Metal-Organic Frameworks as Bioinspired Switchable Catalysts.

Flexible metal-organic frameworks (MOFs) are highly desirable in host-guest chemistry owing to their almost unlimited structural/functional diversities and stimuli-responsive pore architectures. Herein, we designed a flexible Zr-MOF system, namely PCN-700 series, for the realization of switchable catalysis in cycloaddition reactions of CO2 with epoxides. Their breathing behaviors were studied by successive single-crystal X-ray diffraction analyses. The breathing amplitudes of the PCN-700 series were modulated through pre-functionalization of organic linkers and post-synthetic linker installation. Experiments and molecular simulations confirm that the catalytic activities of the PCN-700 series can be switched on and off upon reversible structural transformation, which is reminiscent of sophisticated biological systems such as allosteric enzymes.

Direct measurement of adsorbed gas redistribution in metal-organic frameworks.

Knowledge about the interactions between gas molecules and adsorption sites is essential to customize metal-organic frameworks (MOFs) as adsorbents. The dynamic interactions occurring during adsorption/desorption working cycles with several states are especially complicated. Even so, the gas dynamics based upon experimental observations and the distribution of guest molecules under various conditions in MOFs have not been extensively studied yet. In this work, a direct time-resolved diffraction structure envelope (TRDSE) method using sequential measurements by in situ synchrotron powder X-ray diffraction has been developed to monitor several gas dynamic processes taking place in MOFs: infusion, desorption, and gas redistribution upon temperature change. The electron density maps indicate that gas molecules prefer to redistribute over heterogeneous types of sites rather than to exclusively occupy the primary binding sites. We found that the gas molecules are entropically driven from open metal sites to larger neighboring spaces during the gas infusion period, matching the localized-to-mobile mechanism. In addition, the partitioning ratio of molecules adsorbed at each site varies with different temperatures, as opposed to an invariant distribution mode. Equally important, the gas adsorption in MOFs is intensely influenced by the gas-gas interactions, which might induce more molecules to be accommodated in an orderly compact arrangement. This sequential TRDSE method is generally applicable to most crystalline adsorbents, yielding information on distribution ratios of adsorbates at each type of site.

A Reversible Crystallinity-Preserving Phase Transition in Metal-Organic Frameworks: Discovery, Mechanistic Studies, and Potential Applications.

A quenching-triggered reversible single-crystal-to-single-crystal (SC-SC) phase transition was discovered in a metal-organic framework (MOF) PCN-526. During the phase transition, the one-dimensional channel of PCN-526 distorts from square to rectangular in shape while maintaining single crystallinity. Although SC-SC transformations have been frequently observed in MOFs, most reports have focused on describing the resulting structural alterations without shedding light on the mechanism for the transformation. Interestingly, modifying the occupancy or species of metal ions in the extra-framework sites, which provides mechanistic insight into the causes for the transformation, can forbid this phase transition. Moreover, as a host scaffold, PCN-526 presents a platform for modulation of the photoluminescence properties by encapsulation of luminescent guest molecules. Through judicious choice of these guest molecules, responsive luminescence caused by SC-SC transformations can be detected, introducing a new strategy for the design of novel luminescent MOF materials.

Topology-guided design and syntheses of highly stable mesoporous porphyrinic zirconium metal-organic frameworks with high surface area.

Through a topology-guided strategy, a series of Zr6-containing isoreticular porphyrinic metal-organic frameworks (MOFs), PCN-228, PCN-229, and PCN-230, with ftw-a topology were synthesized using the extended porphyrinic linkers. The bulky porphyrin ring ligand effectively prevents the network interpenetration which often appears in MOFs with increased linker length. The pore apertures of the structures range from 2.5 to 3.8 nm, and PCN-229 demonstrates the highest porosity and BET surface area among the previously reported Zr-MOFs. Additionally, by changing the relative direction of the terminal phenyl rings, this series replaces a Zr8 cluster with a smaller Zr6 cluster in a topologically identical framework. The high connectivity of the Zr6 cluster yields frameworks with enhanced stability despite high porosity and ultralarge linker. As a representative example, PCN-230, constructed with the most extended porphyrinic linker, shows excellent stability in aqueous solutions with pH values ranging from 0 to 12 and demonstrates one of the highest pH tolerances among all porphyrinic MOFs. This work not only presents a successful example of rational design of MOFs with desired topology, but also provides a strategy for construction of stable mesoporous MOFs.

Sequential linker installation: precise placement of functional groups in multivariate metal-organic frameworks.

A unique strategy, sequential linker installation (SLI), has been developed to construct multivariate MOFs with functional groups precisely positioned. PCN-700, a Zr-MOF with eight-connected Zr6O4(OH)8(H2O)4 clusters, has been judiciously designed; the Zr6 clusters in this MOF are arranged in such a fashion that, by replacement of terminal OH(-)/H2O ligands, subsequent insertion of linear dicarboxylate linkers is achieved. We demonstrate that linkers with distinct lengths and functionalities can be sequentially installed into PCN-700. Single-crystal to single-crystal transformation is realized so that the positions of the subsequently installed linkers are pinpointed via single-crystal X-ray diffraction analyses. This methodology provides a powerful tool to construct multivariate MOFs with precisely positioned functionalities in the desired proximity, which would otherwise be difficult to achieve.

Cooperative Cluster Metalation and Ligand Migration in Zirconium Metal-Organic Frameworks.

Cooperative cluster metalation and ligand migration were performed on a Zr-MOF, leading to the isolation of unique bimetallic MOFs based on decanuclear Zr6M4 (M = Ni, Co) clusters. The M(2+) reacts with the µ3-OH and terminal H2O ligands on an 8-connected [Zr6O4(OH)8(H2O)4] cluster to form a bimetallic [Zr6M4O8(OH)8(H2O)8] cluster. Along with the metalation of Zr6 cluster, ligand migration is observed in which a Zr-carboxylate bond dissociates to form a M-carboxylate bond. Single-crystal to single-crystal transformation is realized so that snapshots for cooperative cluster metalation and ligand migration processes are captured by successive single-crystal X-ray structures. In(3+) was metalated into the same Zr-MOF which showed excellent catalytic activity in the acetaldehyde cyclotrimerization reaction. This work not only provides a powerful tool to functionalize Zr-MOFs with other metals, but also structurally elucidates the formation mechanism of the resulting heterometallic MOFs.

Preparation of core-shell coordination molecular assemblies via the enrichment of structure-directing "codes" of bridging ligands and metathesis of metal units.

A series of molybdenum- and copper-based MOPs were synthesized through coordination-driven process of a bridging ligand (3,3'-PDBAD, L(1)) and dimetal paddlewheel clusters. Three conformers of the ligand exist with an ideal bridging angle between the two carboxylate groups of 0° (H2α-L(1)), 120° (H2ß-L(1)), and of 90° (H2γ-L(1)), respectively. At ambient or lower temperature, H2L(1) and Mo2(OAc)4 or Cu2(OAc)4 were crystallized into a molecular square with γ-L(1) and Mo2/Cu2 units. With proper temperature elevation, not only the molecular square with γ-L(1) but also a lantern-shaped cage with α-L(1) formed simultaneously. Similar to how Watson-Crick pairs stabilize the helical structure of duplex DNA, the core-shell molecular assembly possesses favorable H-bonding interaction sites. This is dictated by the ligand conformation in the shell, coding for the formation and providing stabilization of the central lantern shaped core, which was not observed without this complementary interaction. On the basis of the crystallographic implications, a heterobimetallic cage was obtained through a postsynthetic metal ion metathesis, showing different reactivity of coordination bonds in the core and shell. As an innovative synthetic strategy, the site-selective metathesis broadens the structural diversity and properties of coordination assemblies.

A series of highly stable mesoporous metalloporphyrin Fe-MOFs.

A series of mesoporous metalloporphyrin Fe-MOFs, namely PCN-600(M) (M = Mn, Fe, Co, Ni, Cu), have been synthesized using the preassembled [Fe3O(OOCCH3)6] building block. PCN-600 exhibits a one-dimensional channel as large as 3.1 nm and the highest experimental pore volume of 1.80 cm(3)g(-1) among all the reported porphyrinic MOFs. It also shows very high stability in aqueous solutions with pH values ranging from 2-11 and is to our knowledge the only mesoporous porphyrinic MOF stable under basic aqueous conditions. PCN-600(Fe) has been demonstrated as an effective peroxidase mimic to catalyze the co-oxidation reaction.

A highly stable porphyrinic zirconium metal-organic framework with shp-a topology.

Through a kinetically controlled synthetic process, we synthesized PCN-223, a new porphyrinic Zr-MOF constructed from the newly reported hexagonal prismatic 12-connected Zr6 cluster through an unusual disordered arrangement, giving rise to the first example of the shp-a network in MOFs. With its extremely high connectivity, PCN-223 shows high stability in aqueous solutions with a wide range of pH. Cationic PCN-223(Fe) formed by postsynthetic treatment is an excellent recyclable heterogeneous catalyst for the hetero-Diels-Alder reaction.

Stepwise synthesis of robust metal-organic frameworks via postsynthetic metathesis and oxidation of metal nodes in a single-crystal to single-crystal transformation.

Utilizing PCN-426-Mg as a template, two robust metal-organic frameworks (MOFs), PCN-426-Fe(III) and PCN-426-Cr(III), have been synthesized through a strategy of postsynthetic metathesis and oxidation (PSMO) of the metal nodes step by step. The frameworks remained in their single crystal form throughout. Furthermore, the stability and porosity of the frameworks were significantly improved after PSMO. By taking advantage of both the kinetically labile metal-ligand exchange reactions prior to oxidation and the kinetically inert metal-ligand bonds after oxidation, robust MOFs, which would otherwise be difficult to synthesize, can be readily prepared.