Dimensionality Engineering of Magnetic Anisotropy from the Anomalous Hall Effect in Synthetic SrRuO3 Crystals.

Magnetic anisotropy in atomically thin correlated heterostructures is essential for exploring quantum magnetic phases for next-generation spintronics. Whereas previous studies have mostly focused on van der Waals systems, here we investigate the impact of dimensionality of epitaxially grown correlated oxides down to the monolayer limit on structural, magnetic, and orbital anisotropies. By designing oxide superlattices with a correlated ferromagnetic SrRuO3 and nonmagnetic SrTiO3 layers, we observed modulated ferromagnetic behavior with the change of the SrRuO3 thickness. Especially, for three-unit-cell-thick layers, we observe a significant 1500% improvement of the coercive field in the anomalous Hall effect, which cannot be solely attributed to the dimensional crossover in ferromagnetism. The atomic-scale heterostructures further reveal the systematic modulation of anisotropy for the lattice structure and orbital hybridization, explaining the enhanced magnetic anisotropy. Our findings provide valuable insights into engineering the anisotropic hybridization of synthetic magnetic crystals, offering a tunable spin order for various applications.

Exotic Magnetic Anisotropy Near Digitized Dimensional Mott Boundary.

The magnetic anisotropy of low-dimensional Mott systems exhibits unexpected magnetotransport behavior useful for spin-based quantum electronics. Yet, the anisotropy of natural materials is inherently determined by the crystal structure, highly limiting its engineering. The magnetic anisotropy modulation near a digitized dimensional Mott boundary in artificial superlattices composed of a correlated magnetic monolayer SrRuO3 and nonmagnetic SrTiO3 , is demonstrated. The magnetic anisotropy is initially engineered by modulating the interlayer coupling strength between the magnetic monolayers. Interestingly, when the interlayer coupling strength is maximized, a nearly degenerate state is realized, in which the anisotropic magnetotransport is strongly influenced by both the thermal and magnetic energy scales. The results offer a new digitized control for magnetic anisotropy in low-dimensional Mott systems, inspiring promising integration of Mottronics and spintronics.

Sagnac Effect Compensations and Locked States in a Ring Laser Gyroscope.

Frequency lock-in-induced deadband phenomena are major problems of ring laser gyroscopes (RLGs), which deteriorate linear responses to changes in the applied rotation rate. In this work, the frequency lock-in phenomenon occurring in the RLG was successfully investigated by compensating for the Sagnac effect through frequency analysis using a newly defined error function. Integrative and generalized viewpoints from the analyzed results provide new possibilities for relevant performance improvements of optical gyroscopes, as well as a deeper understanding of locked states in principle aspects.

A Multimodal Approach to Huge Fibrous Dysplasia With Ocular Symptoms Using a Navigation System and Endoscope.

BACKGROUND: Fibrous dysplasia (FD) is a rare sporadic benign disease, which involves from single to several bones with unilateral distribution. Recently, image-based surgical navigation systems have played a significant role in surgical process on neurological and orthopedic operations. However, because an intraoral approach can visualize the field for maxillary surgery, there are few cases using endoscopes for excision of FD. Even though, a huge mass involving posterior side of maxillary sinus can be assisted with an endoscope to protect essential structures. To the best of our knowledge, this is the first report of plastic and reconstructive surgeons to perform the operation of a huge FD with both an endoscope and a navigation system. METHODS: Preoperative computed tomography scan and magnetic resonance imaging was performed for precise diagnosis and setting the navigation system (Medtronic Navigation, Louisville, CO). The main problem of the patient was exophthalmos and decreased visual acuity, the authors decided to remove the mass involving the intraorbital portion and sphenoidal portion. Moreover, the mass was extending to intracranium, cooperation with the department of neurosurgery and otolaryngology was planned. The tumor reached by the endoscope was resected as much as possible. During the excision of the sphenoidal portion by the head and neck surgeon of the department of otolaryngology, cerebrospinal fluid leakage was observed and repaired by the neurosurgeon. RESULTS: The exophthalmos measured by Hertel exophthalmometry was reduced only 1 mm, however, gross morphology of the patient was totally changed after the operation. Visual acuity of the right eye was improved from 0.3 to 0.9. The patient was followed up about 6 months and had a seizure event at 2 weeks after the surgery. Afterwards, the symptom has been well controlled by the medication. CONCLUSIONS: This multimodal approach offers a safe, rapid surgical aid in treating huge lesions involving orbital and intracranial area.

Strain-Induced Atomic-Scale Building Blocks for Ferromagnetism in Epitaxial LaCoO3.

The origin of strain-induced ferromagnetism, which is robust regardless of the type and degree of strain in LaCoO3 (LCO) thin films, is enigmatic despite intensive research efforts over the past decade. Here, by combining scanning transmission electron microscopy with ab initio density functional theory plus U calculations, we report that the ferromagnetism does not emerge directly from the strain itself but rather from the creation of compressed structural units within ferroelastically formed twin-wall domains. The compressed structural units are magnetically active with the rocksalt-type high-spin/low-spin order. Our study highlights that the ferroelastic nature of ferromagnetic structural units is important for understanding the intriguing ferromagnetic properties in LCO thin films.

Contribution of the Sub-Surface to Electrocatalytic Activity in Atomically Precise La0.7 Sr0.3 MnO3 Heterostructures.

Electrocatalytic reactions are known to take place at the catalyst/electrolyte interface. Whereas recent studies of size-dependent activity in nanoparticles and thickness-dependent activity of thin films imply that the sub-surface layers of a catalyst can contribute to the catalytic activity as well, most of these studies consider actual modification of the surfaces. In this study, the role of catalytically active sub-surface layers was investigated by employing atomic-scale thickness control of the La0.7 Sr0.3 MnO3 (LSMO) films and heterostructures, without altering the catalyst/electrolyte interface. The activity toward the oxygen evolution reaction (OER) shows a non-monotonic thickness dependence in the LSMO films and a continuous screening effect in LSMO/SrRuO3 heterostructures. The observation leads to the definition of an "electrochemically-relevant depth" on the order of 10 unit cells. This study on the electrocatalytic activity of epitaxial heterostructures provides new insight in designing efficient electrocatalytic nanomaterials and core-shell architectures.

Considerations on the Implementation of the Telemedicine System Encountered with Stakeholders' Resistance in COVID-19 Pandemic.

Background: Non-face-to-face consultation, which ensures physical distance between patients and doctors, is increasing as a substitute mode for dealing with highly infectious diseases. Korea, with its remarkable Information and Communications Technology infrastructure, introduced telemedicine in 1988, yet it has not been formally accepted owing to stakeholders' resistance and legal restrictions. Purpose: This study aims to determine the feasibility of implementing the telemedicine system and find solutions of its development and resistance by stakeholders. Method and Material: The authors present a unique case of Korea where telemedicine, despite its solid technological base, has not yet gained a foothold 32 years after its first pilot project. A narrative review was condected according to the timeline of government-driven telemedicine adoption in Korea, and an analysis was performed on the tendency of stakeholder resistance. Results: The analysis revealed that the relevant stakeholders were classified into doctors, patients, governments and some political parties. Among stakeholders as a whole, private healthcare physicians, who provide over 90% of primary care in Korea, amount to the largest demographic against the implementation of telemedicine. Their resistance was found to be the product of policies and problems arising from the coexistence of telemedicine and conventional healthcare regimes. With the COVID-19 pandemic, policymakers are at odds with these stakeholders while implementing a pilot project. Conclusion: Fostering smooth policy implementation necessitates adopting an approach that reduces conflicts with private healthcare providers.

Phase Instability amid Dimensional Crossover in Artificial Oxide Crystal.

Artificial crystals synthesized by atomic-scale epitaxy provide the ability to control the dimensions of the quantum phases and associated phase transitions via precise thickness modulation. In particular, the reduction in dimensionality via quantized control of atomic layers is a powerful approach to revealing hidden electronic and magnetic phases. Here, we demonstrate a dimensionality-controlled and induced metal-insulator transition (MIT) in atomically designed superlattices by synthesizing a genuine two-dimensional (2D) SrRuO_{3} crystal with highly suppressed charge transfer. The tendency to ferromagnetically align the spins in an SrRuO_{3} layer diminishes in 2D as the interlayer exchange interaction vanishes, accompanying the 2D localization of electrons. Furthermore, electronic and magnetic instabilities in the two SrRuO_{3} unit cell layers induce a thermally driven MIT along with a metamagnetic transition.

Understanding Moderators of Home Blood Pressure Telemonitoring Systems in Urban Hypertensive Patients: A Systematic Review and Meta-Analysis.

Background: Factors affecting the effectiveness of telemonitoring in home blood pressure telemonitoring (HBPT) must be examined in an integrated analysis in urban hypertensive patients. Materials and Methods: In a systematic review of electronic databases, we retrieved 1,433 citations and selected 34 comparisons. Specified moderators were the duration of the intervention, the frequency of remote transmission of blood pressure (BP) data, the additional intervention, and the intervention pathway. Results: For the duration of follow-up of HBPT, the weighted mean difference (WMD) in systolic blood pressure (SBP) between two groups was 11.900 mmHg (p-value <0.001) at 2 months and 3.024 mmHg (p = 0.002) at 12 months. The WMD in SBP was 5.512 mmHg (p < 0.001) in cases where data were transmitted daily and 1.818 mmHg (p = 0.084) for monthly transmission. For the group in which further interventions with HBPT were conducted, the WMD in SBP was 3.813 mmHg (p < 0.001). For patients who did not receive additional interventions, the WMD was 2.747 mmHg (p = 0.005). For the pathway of HBPT, the WMD was 6.800 mmHg (p = 0.053) when BP values were remote transmitted through letter, 3.041 mmHg (p = 0.001) through mobile phone/web, 2.224 mmHg (p = 0.043) through telephone-linked computer system, and 4.352 mmHg (p < 0.001) through telephone. Conclusions: The effects of moderators of HBPT systems utilized with urban hypertensive patients differ from those in interventions that did not distinguish urban from rural areas. Results for duration of implementation and frequency of data transmission were significant. Among the interventions using telecommunications, the telephone was the most effective in comparison to other channels.

Effects of Remote Monitoring of Blood Pressure in Management of Urban Hypertensive Patients: A Systematic Review and Meta-Analysis.

Background:Remote home blood pressure monitoring (RBPM) has been shown as effective in managing hypertension in underserved areas. Effects on urban patients, who are more easily provided with high-quality medical services, are still unclear. We systematically review previously published randomized controlled trials on the effect of RBPM for urban hypertensive patients.Methods:We searched electronic databases for studies published in English up to October 2018. Studies comparing the use of RBPM to face-to-face care were included. Outcome measures were changes in office blood pressure (BP) and the rate of BP control.Results:We identified 1,433 potential references for screening, of which 27 were eligible for review. Substantial heterogeneity was evident for the investigated variables. A significant standardized mean difference (SMD) was observed for RBPM for systolic BP, but the effect size was small compared to face-to-face care and was clinically irrelevant in avoiding cardiovascular events (0.212, 95% confidence interval 0.148-0.275; p < 0.001). For diastolic BP, the SMD between the two groups was small (0.170, p < 0.001) and the effect of RBPM was irrelevant in preventing cardiovascular events. The effect on the rate of BP control was significantly high for the intervention group (relative risk: 1.136; p = 0.018).Conclusions:This review demonstrates that RBPM performed on urban hypertensive patients has limited value and seems not to be superior to ordinary care in avoidance of cardiovascular events. Further studies are needed to provide more reliable information about the effectiveness of RBPM in preventing hypertensive cardiovascular complications.

Total and Methyl Mercury Concentrations in Antarctic Toothfish (Dissostichus mawsoni): Health Risk Assessment.

The concentrations of total mercury (THg) in different organs of the Antarctic toothfish (Dissostichus mawsoni) collected from CCAMLR research blocks in Subarea 88.3 and Division 58.4.1 off the coast of Antarctica were determined. The results revealed THg concentrations of 0.165 ± 0.095 mg/kg (0.023-0.454 mg/kg, wet weight) in the Antarctic toothfish. In muscle, methyl mercury (MeHg) accounted for approximately 40% of the THg. In a comparison analysis, muscle and liver tended to bioaccumulate the highest levels of THg, and both THg and MeHg contents showed correlations with fish length and weight. Compared with international guidelines, fish contained 2.5-6.4% and 4.0-10.3% of the provisional tolerable weekly intake for THg recommended by the Joint FAO/WHO Expert Committee on Food Additives and the tolerable weekly intake for MeHg proposed by the European Food Safety Authority, respectively. These results suggest that consumption of the Antarctic toothfish presents no health risk to humans.

Self-Assembled Peptide-Carbon Nitride Hydrogel as a Light-Responsive Scaffold Material.

Peptide self-assembly is a facile route to the development of bioorganic hybrid materials that have sophisticated nanostructures toward diverse applications. Here, we report the synthesis of self-assembled peptide (Fmoc-diphenylalanine, Fmoc-FF)/graphitic carbon nitride (g-C3N4) hydrogels for light harvesting and biomimetic photosynthesis through noncovalent interactions between aromatic rings in Fmoc-FF nanofibers and tris-s-triazine in g-C3N4 nanosheets. According to our analysis, the photocurrent density of the Fmoc-FF/g-C3N4 hydrogel was 1.8× higher (0.82 µA cm-1) than that of the pristine g-C3N4. This is attributed to effective exfoliation of g-C3N4 nanosheets in the Fmoc-FF/g-C3N4 network, facilitating photoinduced electron transfers. The Fmoc-FF/g-C3N4 hydrogel reduced NAD+ to enzymatically active NADH under light illumination at a high rate of 0.130 mol g-1 h-1 and drove light-responsive redox biocatalysis. Moreover, the Fmoc-FF/g-C3N4 scaffold could well-encapsulate key photosynthetic components, such as electron mediators, cofactors, and enzymes, without noticeable leakage, while retaining their functions within the hydrogel. The prominent activity of the Fmoc-FF/g-C3N4 hydrogel for biomimetic photosynthesis resulted from the easy transfer of photoexcited electrons from electron donors to NAD+ via g-C3N4 and electron mediators as well as the hybridization of key photosynthetic components in a confined space of the nanofiber network.

Voltage Scaling of Graphene Device on SrTiO3 Epitaxial Thin Film.

Electrical transport in monolayer graphene on SrTiO3 (STO) thin film is examined in order to promote gate-voltage scaling using a high-k dielectric material. The atomically flat surface of thin STO layer epitaxially grown on Nb-doped STO single-crystal substrate offers good adhesion between the high-k film and graphene, resulting in nonhysteretic conductance as a function of gate voltage at all temperatures down to 2 K. The two-terminal conductance quantization under magnetic fields corresponding to quantum Hall states survives up to 200 K at a magnetic field of 14 T. In addition, the substantial shift of charge neutrality point in graphene seems to correlate with the temperature-dependent dielectric constant of the STO thin film, and its effective dielectric properties could be deduced from the universality of quantum phenomena in graphene. Our experimental data prove that the operating voltage reduction can be successfully realized due to the underlying high-k STO thin film, without any noticeable degradation of graphene device performance.

Analysis of dead zone sources in a closed-loop fiber optic gyroscope.

Analysis of the dead zone is among the intensive studies in a closed-loop fiber optic gyroscope. In a dead zone, a gyroscope cannot detect any rotation and produces a zero bias. In this study, an analysis of dead zone sources is performed in simulation and experiments. In general, the problem is mainly due to electrical cross coupling and phase modulation drift. Electrical cross coupling is caused by interference between modulation voltage and the photodetector. The cross-coupled signal produces spurious gyro bias and leads to a dead zone if it is larger than the input rate. Phase modulation drift as another dead zone source is due to the electrode contamination, the piezoelectric effect of the LiNbO3 substrate, or to organic fouling. This modulation drift lasts for a short or long period of time like a lead-lag filter response and produces gyro bias error, noise spikes, or dead zone. For a more detailed analysis, the cross-coupling effect and modulation phase drift are modeled as a filter and are simulated in both the open-loop and closed-loop modes. The sources of dead zone are more clearly analyzed in the simulation and experimental results.

Distribution of heavy metals in internal organs and tissues of Korean molluscan shellfish and potential risk to human health.

Molluscan shellfish (gastropods and bivalves) were collected from major fish markets on the Korean coast and analyzed for mercury by direct Hg analyzer and for other metals, such as cadmium, lead, chromium, silver, nickel, copper and zinc, using inductively coupled plasma mass spectrometry. Distribution of heavy metals in muscles, internal organs and whole tissues were determined and a potential risk assessment was conducted to evaluate their hazard for human consumption. Heavy metals were accumulated significantly higher (P < 0.05) in internal organs than in muscles for all species. The mean Cd level, which had the highest level of three hazardous metals (Cd, Pb, and Hg) in all internal-organ samples were above the regulatory limit of Korea and the mean level in whole tissue samples of the selected gastropod species, bay scallop and comb pen shell, exceeded the limit (except in a few cases). The sum of the estimated dietary intake of Cd, Pb and Hg for each part of all tested species accounted for 1.59-16.94, 0.02-0.36, and 0.07-0.16% respectively, of the provisional tolerable daily intake adopted by the Joint FAO/WHO Expert Committee on Food Additives. The hazard index for each part of gastropods and bivalves was below 1.0, however, the maximum HI for internal organs of all analysed species was quite high (0.71). These results suggest that consumption of flesh after removing the internal organs of some molluscan shellfish (all gastropod species, bay scallop and comb pen shell) is a suitable way for reducing Cd exposure.

Reversible redox reactions in an epitaxially stabilized SrCoO(x) oxygen sponge.

Fast, reversible redox reactions in solids at low temperatures without thermomechanical degradation are a promising strategy for enhancing the overall performance and lifetime of many energy materials and devices. However, the robust nature of the cation's oxidation state and the high thermodynamic barrier have hindered the realization of fast catalysis and bulk diffusion at low temperatures. Here, we report a significant lowering of the redox temperature by epitaxial stabilization of strontium cobaltites (SrCoO(x)) grown directly as one of two distinct crystalline phases, either the perovskite SrCoO(3-δ) or the brownmillerite SrCoO(2.5). Importantly, these two phases can be reversibly switched at a remarkably reduced temperature (200-300 °C) in a considerably short time (< 1 min) without destroying the parent framework. The fast, low-temperature redox activity in SrCoO(3-δ) is attributed to a small Gibbs free-energy difference between two topotatic phases. Our findings thus provide useful information for developing highly sensitive electrochemical sensors and low-temperature cathode materials.

Tunneling electroresistance induced by interfacial phase transitions in ultrathin oxide heterostructures.

The ferroelectric (FE) control of electronic transport is one of the emerging technologies in oxide heterostructures. Many previous studies in FE tunnel junctions (FTJs) exploited solely the differences in the electrostatic potential across the FTJs that are induced by changes in the FE polarization direction. Here, we show that in practice the junction current ratios between the two polarization states can be further enhanced by the electrostatic modification in the correlated electron oxide electrodes, and that FTJs with nanometer thin layers can effectively produce a considerably large electroresistance ratio at room temperature. To understand these surprising results, we employed an additional control parameter, which is related to the crossing of electronic and magnetic phase boundaries of the correlated electron oxide. The FE-induced phase modulation at the heterointerface ultimately results in an enhanced electroresistance effect. Our study highlights that the strong coupling between degrees of freedom across heterointerfaces could yield versatile and novel applications in oxide electronics.

Monitoring the formation of infinite-layer transition metal oxides through in situ atomic-resolution electron microscopy.

Infinite-layer transition metal oxides with two-dimensional oxygen coordination exhibit intriguing electronic and magnetic properties due to strong in-plane orbital hybridization. The synthesis of this distinctive structure has primarily relied on kinetically controlled reduction of oxygen-rich phases featuring three-dimensional polyhedral oxygen coordination. Here, using in situ atomic-resolution electron microscopy, we scrutinize the intricate atomic-scale mechanisms of oxygen conduction leading to the transformation of SrFeO2.5 to infinite-layer SrFeO2. The oxygen release is highly anisotropic and governed by the lattice reorientation aligning the fast diffusion channels towards the outlet, which is facilitated by cooperative yet shuffle displacements of iron and oxygen ions. Accompanied with the oxygen release, the three-dimensional to two-dimensional reconfiguration of oxygen is facilitated by the lattice flexibility of FeOx polyhedral layers, adopting multiple discrete transient states following the sequence determined by the least energy-costing pathways. Similar transformation mechanism may operate in cuprate and nickelate superconductors, which are isostructural with SrFeO2.

Real-time dynamics of angular momentum transfer from spin to acoustic chiral phonon in oxide heterostructures.

Chiral phonons have recently been explored as a novel degree of freedom in quantum materials. The angular momentum carried by these quasiparticles is generated by the breaking of chiral degeneracy of phonons, owing to the chiral lattice structure or the rotational motion of ions of the material. In ferromagnets, a mechanism for generating non-equilibrium chiral phonons has been suggested, but their temporal evolution, which obeys Bose-Einstein statistics, remains unclear. Here we report the real-time dynamics of thermalized chiral phonons in an artificial superlattice composed of ferromagnetic metallic SrRuO3 and non-magnetic insulating SrTiO3. Following the photo-induced ultrafast demagnetization in the SrRuO3 layer, we observed the appearance of a magneto-optic signal in the superlattice, which is absent in the SrRuO3 single films. This magneto-optic signal exhibits thermally driven dynamic properties and a clear correlation with the thickness of the non-magnetic SrTiO3 layer, implying that it originates from thermalized chiral phonons. We use numerical calculations considering the magneto-elastic coupling in SrRuO3 to validate our experimental observations and the angular momentum transfer mechanism between the lattice and spin systems in ferromagnetic systems and also to the non-magnetic system.

Symmetry Engineering of Epitaxial Hf0.5Zr0.5O2 Ultrathin Films.

Robust ferroelectricity in HfO2-based ultrathin films has the potential to revolutionize nonvolatile memory applications in nanoscale electronic devices because of their compatibility with the existing Si technology. However, to fully exploit the potential of ferroelectric HfO2-based thin films, it is crucial to develop strategies for the controlled stabilization of various HfO2-based polymorphs in nanoscale heterostructures. This study demonstrates how substrate-orientation-induced anisotropic strain can engineer the crystal symmetry, structural domain morphology, and growth orientation of ultrathin Hf0.5Zr0.5O2 (HZO) films. Epitaxial ultrathin HZO films were grown on the heterostructures of (001)- and (110)-oriented La2/3Sr1/3MnO3/SrTiO3 (LSMO/STO) substrate. Various structural analyses revealed that the (110)-oriented substrate promotes a higher degree of structural order (crystallinity) with improved stability of the (111)-oriented orthorhombic phase (Pca21) of HZO. Conversely, the (001)-oriented substrate not only induces a distorted orthorhombic structure but also facilitates the partial stabilization of nonpolar phases. Electrical measurements revealed robust ferroelectric properties in epitaxial thin films without any wake-up effect, where the well-ordered crystal symmetry stabilized by STO(110) facilitated better ferroelectric characteristics. This study suggests that tuning the epitaxial growth of ferroelectric HZO through substrate orientation can improve the stability of the metastable ferroelectric orthorhombic phase and thereby offer a better understanding of device applications.