Dispersion-boosting wideband electromagnetic transparency under extreme angles for TE-polarized waves.

Half-wave wall is the most common method of achieving electromagnetic (EM) transparency. Transmission windows can be formed when reflected waves are out of phase. Due to the interference mechanism, these windows are dependent on the frequency and incident angle of EM waves, leading to limited bandwidth, especially under extreme angles. In this letter, we propose to extend the bandwidth of the transmission window under extreme angles by utilizing dispersion. To this end, long metallic wires are embedded into the half-wave wall matrix, without increasing the physical thickness. Due to the plasma-like behavior of metallic wires under TE-polarization, the effective permittivity of the half-wave wall, rather than keeping constant, increases with frequency nonlinearly. Such a dispersion will boost wideband transparency in two aspects. On one hand, an additional transmission window will be generated where the effective permittivity equals that of the air; on the other hand, the 1st- and 2nd-order half-wave windows will be made quite closer. By tailoring the dispersion, the three windows can be merged to enable wideband transparency under extreme incident angles. A proof-of-principle prototype was designed, fabricated, and measured to verify this strategy. Both simulated and measured results show that the prototype can operate in the whole Ku-band under incident angle [70°, 85°] for TE-polarized waves. This work provides an effective method of achieving wideband EM transparency under extreme angles and may find applications in radar, communications, and others.

Polarization-multiplexed full-space metasurface simultaneously merging with an ultrawide-angle antireflection and a large-angle retroreflection.

Multifunctional electromagnetic (EM) metasurfaces are capable of manipulating electromagnetic waves with kaleidoscopic functions flexibly, which will significantly enhance integration and applications of electronic systems. However, most known design schemes only realize the reflection or transmission functions under a specific angle range, which wastes the other half EM space and restricts wider applications of multifunctional metadevices. Herein, an encouraging strategy of broadband and wide-angle EM wavefronts generator is proposed to produce two independent functions, i.e., antireflections for transverse electric (TE) waves and retroreflection for transverse magnetic (TM) waves, which utilizes band-stop and bandpass responses of the metasurface, respectively. As a feasibility verification of this methodology, a three-layer cascaded metasurface, composed of anisotropic crossbar structures patterned on the two surfaces of a dielectric substrate with sandwiched orthogonal metal-gratings, is designed, fabricated, and measured. Both the simulated and experimental results are in good accordance with theoretical analyses. This full-space metasurface opens up a new route to multifunctional metasurfaces and will further promote engineering applications of metasurfaces.

Large-angle broadband transmission of electromagnetic waves through dielectric plates by embedding meta-atoms.

In many practical applications, dielectric electromagnetic (EM) windows are usually under large-angle incidence of EM waves rather than normal incidence. To guarantee normal operation of devices inside, high transmission must be maintained under large incident angles, especially for TE-polarized waves. In this work, we propose a method of achieving broadband transmission of TE-polarized waves under large incident angles by embedding meta-atoms within dielectric plates. To this end, long metallic wires and S-shaped structures are embedded in the original dielectric plate, the former of which will dilute the effective permittivity due to plasma oscillation and the latter will increase the effective permeability due to induced strong current loops under large incident angles. In this way, two consecutive transmission peaks can be generated, forming a broad transmission band under large incident angles. A proof-of-principle Ku-band prototype was designed, fabricated, and measured to verify this strategy. Both simulated and measured results show that the prototype can operate in the whole Ku-band under incident angle [60°, 85°] for TE-polarized waves, with significantly enhanced transmission. This work provides an effective method of enhancing large-angle transmission of EM waves and may find applications in radar, communications and others.

Tailoring permittivity using metasurface: a facile way of enhancing extreme-angle transmissions for both TE- and TM-polarizations.

The transmission of electromagnetic (EM) waves through a dielectric plate will be decreased significantly when the incident angle becomes extremely large, regardless of transverse electric (TE)- or transverse magnetic (TM)- polarization. In this regard, we propose a facile way of tailoring the permittivity of the dielectric material using metasurface to enhance the transmissions of both TE- and TM-polarized waves under extremely large incidence angles. Due to parallel or antiparallel electric fields induced by the metasurface, the net electric susceptibility is altered, and hence the effective permittivity can be tailored to improve the impedance matching on the two air-dielectric interfaces, which enhances the wave transmissions significantly under extreme incident angles. As an example, we apply this method to a typical ceramic-matrix composite (CMC) plate. By incorporating orthogonal meta-gratings into the CMC plate, its effective permittivity is reduced for the TE-polarized waves but increased for the TM-polarized waves under the extreme incidence angle, which can reduce the impedance for the TE-polarization and increase the Brewster angle for the TM-polarization. Therefore, the impedance matchings for both TE- and TM-polarizations are improved simultaneously and dual-polarized transmission enhancements are achieved under the extreme angles. Here, the transmission responses have been numerically and investigated using the finite-difference-time-domain (FDTD) method. A proof-of-principle prototype is designed, fabricated, and measured to verify this method. Both numerical simulations and measurement results show that the prototype can operate under extremely large incidence angles θi∈[75°,85°] with significant transmission enhancement for both TE- and TM-polarizations compared to the pure dielectric plate. This work provides a facile way to enhance the transmissions under extreme angles and can be readily extended to terahertz and optical frequencies.

Extremely angle-stable transparent window for TE-polarized waves empowered by anisotropic metasurfaces.

Impedance mismatch generally exists upon interfaces between different media. This is especially true for TE-polarized waves with large incident angles since there is no Brewster effect. As a result, high-efficiency transmission can only be guaranteed within limited incident angle range. It is desirable that transparent windows possess robust angle-stability. In this work, we propose a strategy of realizing transparent windows with extreme angle-stability using anisotropic metasurfaces. Different from traditional isotropic materials, anisotropic metasurfaces require specific three-dimensional permittivity and permeability parameters. Theoretical formulas are derived to realize a highly efficient transmission response without angular dispersion. To validate our design concept, a two-layer cascaded electromagnetic anti-reflector is designed, and it exhibits a characteristic impedance matching for nearly all incidence angles under TE-polarization illumination. As a proof-of-concept, a prototype of extremely angle-stable transparent window is fabricated and measured. Compared with the pure dielectric plate, the reflection coefficients are on average reduced by 40% at 13.5 GHz for TE-polarized waves from 0° to 80°. Therefore, we think, anisotropic cascaded electromagnetic transparent windows are capable of tailoring the electromagnetic parameter tensors as desired, and provide more adjustable degrees of freedom for manipulating electromagnetic wavefronts, which might open up a promising way for electromagnetic antireflection and find applications in radomes, IR windows and others.

Transmission enhancement of a half-wave wall under extreme angles by synergy of double lorentz resonances.

The a half-wave wall is usually adopted as the transparent window for electromagnetic (EM) waves ranging from microwave to optical regimes. Due to the interference nature, the bandwidth of the half-wave wall is usually quite narrow, especially under extreme angles for TE-polarized waves. It is usually contradictory to expand the bandwidth and to keep high transmission. To overcome this contradiction, we propose to extend the transmission bandwidth of half-wave walls under extreme angles by introducing Lorentz-type resonances using metasurfaces. The impedance of the half-wave wall is firstly analyzed. To improve the impedance matching, the impedance below and above the half-wave frequency should be increased. To this end, metallic wires and I-shaped structures are incorporated into the half-wave wall as the mid-layer. Due to the Lorentz-type resonance of the metallic wire, effective permittivity below the half-wave frequency can be reduced while that above the half-wave frequency can be increased due to Lorentz-type resonance of the I-shaped structures, both under large incident angles. In this way, the impedance matching, and thus the transmission, can be improved within an extended band. A proof-of-principle prototype was designed, fabricated, and measured to verify this strategy. Both simulated and measured results show that the prototype can operate in 14.0-19.0GHZ under incident angle [70°, 85°] with significant transmission enhancement for TE-polarized waves. This work provides an effective method of enhancing the transmission of EM waves and may find applications in radomes, IR windows, and others.

Deep-Learning-Empowered Holographic Metasurface with Simultaneously Customized Phase and Amplitude.

Metasurfaces with simultaneously and independently controllable amplitude and phase have provided a higher degree of freedom in manipulating electromagnetic (EM) waves. Compared with phase- or amplitude-only modulation, the capability of simultaneously controlling the phase and amplitude of EM waves can enable holography with a higher resolution. However, this drastically increases the design complexity of holographic metasurfaces, and the design process is usually quite time-consuming. In this paper, we propose an inverse design of meta-atoms that can simultaneously and independently tailor the phase and amplitude of transmitted waves using customized deep ResNet while eliminating the coupling of parameters. To demonstrate the design method, two holographic metasurfaces were designed using the trained network without the need for parameter sweeping, which will significantly enhance design efficiency. Prototypes were fabricated and measured. Both the simulated and measured results show that high-resolution holography is obtained, which sufficiently verifies the reliability of the design method. Our work paves the way for the intelligent design of metasurfaces and can also be applied to the design of other artificial materials or surfaces.