ABSTRACT
Indoor Air Quality monitoring in cultural institutions is of particular concern to protect these places and the cultural heritage content. An indoor monitoring campaign was performed in three museums in Florence (Italy) to determine the occurrence and levels of volatile organic compounds (VOCs). VOCs of interest included BTEX (benzene, toluene, ethylbenzene, xylenes), terpenes, aldehydes, organic acids, and cyclic volatile methyl siloxanes (cVMS). The most abundant VOCs in all samples analyzed were BTEX, which were strictly related to the traffic source, followed by siloxanes and terpenes. Among BTEX, toluene was always the most abundant followed by xylenes, ethylbenzene, and benzene. cVMS in exhibition rooms with the presence of visitors showed higher values compared to samples collected when the museums were closed. Terpenes showed not only the influence of vegetation-biogenic sources surrounding a museum but could also be related to the wood used for the construction of showcases and furniture and the use of cleaning products. Data obtained also showed the presence of organic acids and aldehydes whose source can be traced back to exhibits themselves and wood-based furniture. Assessing the levels of organic acids in museums is important because, over time, it can cause deterioration of the artifacts.
Subject(s)
Air Pollution, Indoor/statistics & numerical data , Environmental Monitoring , Museums/statistics & numerical data , Volatile Organic Compounds/analysis , Air Pollutants/analysis , Aldehydes/analysis , Benzene/analysis , Italy , Terpenes , Toluene/analysis , Xylenes/analysisABSTRACT
Specific ion effects on the kinetics of iodination of acetone in an acidic medium are investigated by UV/Vis spectrophotometry as a function of nature of the acid and temperature. The results indicate that the order of the reaction with respect to acetone is practically unaffected by the composition of the acid while the value of the mixed constant k1 K increases according to the sequence HBr
ABSTRACT
The structure and rheology behaviour of gels produced by water dispersions of a vitamin C-derived surfactant (ascorbyl-6-O-dodecanoate) were investigated by means of SAXS and rheology experiments for the first time. The gel state is formed upon heating and is due to an anisotropic expansion of the tightly compact lamellar structure. The phase transition involves primarily the melting of the alkyl chains and a significant increment in the interlamellar water layer. In particular, our results show that in the gel the hydrophobic chains are in a liquid-like state, as in the core of a micelle, while the head groups release their acidic proton, become negatively charged and determine the onset of strong electrostatic interactions between facing lamellae. The full hydration of the anionic head groups and the uptake of a significant amount of water increase the interlamellar thickness and stabilise the gel structure. Rheology and SAXS measurements together provide an updated picture for the gel state. Moreover, for the first time we show the presence of a concentration threshold, above which the self-assembled aggregates interact more strongly and deplete some of the water that is retained in the interlamellar region.
ABSTRACT
The combination of two different metals, each of them acting on different steps of the oxygen reduction reaction (ORR), yields synergic catalytic effects. In this respect, the electrocatalytic effect of silver is enhanced by the addition of cobalt, which is able to break the O-O bond of molecular oxygen, thus accelerating the first step of the reduction mechanism. At the same time, research is to further reduce the catalyst's cost, reducing the amount of Ag, which, even though being much less expensive than Pt, is still a noble metal. From this point of view, using a small amount of Ag together with an inexpensive material, such as graphite, represents a good compromise. The aim of this work was to verify if the synergic effects are still operating when very small amounts of cobalt (2-10 µg·cm(-2)) are added to the microparticles of silver electrodeposited on glassy carbon, described in a preceding paper from us. To better stress the different behaviour observed when cobalt and silver are contemporarily present in the deposit, the catalytic properties of cobalt alone were investigated. The analysis was completed by the Levich plots to evaluate the number of electrons involved and by Tafel plots to show the effects on the reaction mechanism.
Subject(s)
Carbon/chemistry , Cobalt/chemistry , Electrochemical Techniques/methods , Electroplating/methods , Glass/chemistry , Oxygen/chemistry , Silver/chemistry , Catalysis , Electrodes , Kinetics , Oxidation-ReductionABSTRACT
The loss of mechanical properties affecting archeological or paleontological bones is often caused by demineralization processes that are similar to those driving the mechanisms leading to osteoporosis. One simple way to harden and to strengthen demineralized bone remains could be the in situ growth of CaCO3 crystals in the aragonite polymorph - metastable at atmospheric pressure -which is known to have very strong mechanical strength in comparison with the stable calcite. In the present study the controlled growth of aragonite crystals was achieved by reaction between atmospheric CO2 and calcium hydroxide nanoparticles in the presence of collagen within the deteriorated bones. In a few days the carbonation of Ca(OH)2 particles led to a mixture of calcite and aragonite, increasing the strength of the mineral network of the bone. Scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDS) and Fourier transform infrared (FT-IR) spectrometry showed that aragonite crystallization was achieved. The effect of the aragonite crystal formation on the mechanical properties of the deteriorated bones was investigated by means of X-rays microtomography, helium porosimetry, atomic force microscopy (AFM), and Vickers microhardness techniques. All these data enabled to conclude that the strength of the bones increased of a factor of 50-70% with respect to the untreated bone. These results could have immediate impact for preserving archeological and paleontological bone remains.
Subject(s)
Bone and Bones/chemistry , Calcium Carbonate/chemistry , Calcium Hydroxide/chemistry , Carbon Dioxide/chemistry , Nanostructures/chemistry , Archaeology , Collagen/chemistry , Crystallization , Humans , Middle Aged , PaleontologyABSTRACT
The interactions between an acrylic copolymer, poly ethylmethacrylate/methylacrylate (70:30) (Poly(EMA/MA), and Ca(OH)2 nanoparticles were investigated in order to establish the reciprocal influence of these two compounds on their peculiar properties. The carbonation kinetics of Ca(OH)2 nanoparticles by atmospheric CO2 was investigated by FTIR and SEM measurements and compared to that of a nanocomposite film. CaCO3 formation occurred even in the presence of the copolymer, but only after an induction period of ca. 200 h and with a lower reaction rate. Some implications in cultural heritage conservation dealing with application of nanolime on artifacts previously treated with acrylic copolymers were discussed. Contact angle measurements, mechanical cohesion properties, and water vapor permeability allowed us to conclude that the optimum behavior of nanolime with respect to transpiration was not compromised by the presence of the copolymer, and the behavior in terms of mechanical properties recovery by the application of Ca(OH)2 nanoparticles remained excellent even in the presence of poly(EMA/MA).
Subject(s)
Acrylates/chemistry , Calcium Hydroxide/chemistry , Nanostructures/chemistry , Polymers/chemistry , Particle Size , Surface PropertiesABSTRACT
The chemical analysis of egg-based wall paintings-the mezzo fresco technique-is an interesting topic in the characterisation of organic binders. A revised procedure for a dot-enzyme-linked immunosorbent assay (dot-ELISA) able to detect protein components of egg-based wall paintings is reported. In the new dot-ELISA procedure we succeeded in maximizing the staining colour by adjusting the temperature during the staining reaction. Quantification of the colour intensity by visible reflectance spectroscopy resulted in a straight line plot of protein concentration against reflectance in the wavelength range 380-780 nm. The modified dot-ELISA procedure is proposed as a semi-quantitative analytical method for characterisation of protein binders in egg-based paintings. To evaluate its performance, the method was first applied to standard samples (ovalbumin, whole egg, egg white), then to model specimens, and finally to real samples (Giotto's wall paintings). Moreover, amino acid analysis performed by innovative ultra-performance liquid chromatography was applied both to standards and to model samples and the results were compared with those from the dot-ELISA tests. In particular, after protein hydrolysis (24 h, 114 °C, 6 mol L(-1) HCl) of the samples, amino acid derivatization by use of 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate enabled reproducible analysis of amino acids. This UPLC amino acid analysis was rapid and reproducible and was applied for the first time to egg-based paintings. Because the painting technique involved the use of egg-based tempera on fresh lime-based mortar, the study enabled investigation of the effect of the alkaline environment on egg-protein detection by both methods.
Subject(s)
Chromatography, High Pressure Liquid/methods , Egg Proteins/chemistry , Enzyme-Linked Immunosorbent Assay/methods , Paint/analysis , Amino Acids/analysis , Eggs/analysis , PaintingsABSTRACT
Polydimethylsiloxane (PDMS) organogel sponges were prepared and studied in order to understand the role of pore size in an elastomeric network on the ability to uptake and release organic solvents. PDMS organogel sponges have been produced according to sugar leaching techniques by adding two sugar templates of different forms and grain sizes (a sugar cube template and a powdered sugar template), in order to obtain materials differing in porosity, pore size distribution, and solvent absorption and liquid retention capability. These materials were compared to PDMS organogel slabs that do not contain pores. The sponges were characterized by Fourier-transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR) and compared with PDMS slabs that do not contain pores. Scanning electron microscopy (SEM) provided information about their morphology. X-ray micro-tomography (XMT) allowed us to ascertain how the form of the sugar templating agent influences the porosity of the systems: when templated with sugar cubes, the porosity was 77% and the mean size of the pores was ca. 300 µm; when templated with powdered sugar, the porosity decreased to ca. 10% and the mean pore size was reduced to ca. 75 µm. These materials, porous organic polymers (POPs), can absorb many solvents in different proportions as a function of their polarity. Absorption capacity, as measured by swelling with eight solvents covering a wide range of polarities, was investigated. Rheology data established that solvent absorption did not have an appreciable impact on the gel-like properties of the sponges, suggesting their potential for applications in cultural heritage conservation. Application tests were conducted on the surfaces of two different lab mock-ups that simulate real painted works of art. They demonstrated further that PDMS sponges are a potential innovative support for controlled and selective cleaning of works of art surfaces.
ABSTRACT
An innovative protocol for the consolidation of ancient bone remains based on the use of nanometric HydroxyAPatite (HAP) was set up and tested through a multidisciplinary approach. A new protocol for the synthesis of HAP nanoparticles was developed, and the composition of the obtained nanomaterial was investigated through Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray Diffraction (XRD); sizes, shape and morphology of the synthesized particles were studied by Scanning Electron Microscopy (SEM). The consolidation performance was evaluated by testing the new nanomaterial on degraded ancient bone findings. An increase of the mineral density and of the micro-hardness of the bone were observed. The new consolidation method was also tested to assess possible effects on the palaeogenetic analysis and radiocarbon dating on the treated bones. The consolidation treatment does not introduce any contaminations that could affect radiocarbon dating and has no general detrimental impact on the genetic characterization of the skeletal remains. This consolidation procedure represents a more compatible conservation tool with respect to traditional procedures: it has been shown that the treatment is effective, easily-applicable and compatible with post-consolidation analysis.
Subject(s)
Nanoparticles , Nanostructures , Bone and Bones , Durapatite/chemistry , Nanoparticles/chemistry , X-Ray DiffractionABSTRACT
The works of art and artifacts that constitute our cultural heritage are subject to deterioration, both from internal and from external factors. Surfaces that interact with the environment are the most prone to aging and decay; accordingly, soiling is a prime factor in the degradation of surfaces and the attendant disfigurement of a piece. Coatings that were originally intended to protect or contribute aesthetically to an artwork should be removed if they begin to have a destructive impact on its appearance or surface chemistry. Since the mid-19th century, organic solvents have been the method of choice for cleaning painted surfaces and removing degraded coatings. Care must be taken to choose a solvent mixture that minimizes swelling of or leaching from the original paint films, which would damage and compromise the physical integrity of all the layers of paint. The use of gels and poultices, first advocated in the 1980s, helps by localizing the solvent and, in some cases, by reducing solvent permeation into underlying paint layers. Unfortunately, it is not always easy to remove gels and their residues from a paint surface. In this Account, we address the removal problem by examining the properties of three classes of innovative gels for use on artwork--rheoreversible gels, magnetic gels, and "peelable" gels. Their rheological properties and efficacies for treating the surfaces of works have been studied, demonstrating uniquely useful characteristics in each class: (1) Rheoreversible gels become free-flowing on application of a chemical or thermal "switch". For art conservation, a chemical trigger is preferred. Stable gels formed by bubbling CO(2) through solutions of polyallylamine or polyethylenimines (thereby producing ammonium carbamates, which act as chain cross-links) can be prepared with a wide range of solvent mixtures. After solubilization of varnish and dirt, addition of a weak acid (mineral or organic) displaces the CO(2), and the resulting free-flowing liquid can be removed gently. (2) Incorporation of magnetic, coated-ferrite nanoparticles into polyacrylamide gels adds functionality to a versatile system comprising oil-in-water microemulsions, aqueous micellar solutions, or xerogels that act as sponges. The ferrite particles allow the use of magnets both to place the gels precisely on a surface and to lift them from it after cleaning. (3) Novel formulations of poly(vinyl alcohol)-borate gels, which accept a range of organic cosolvents, show promise for swelling and dissolving organic coatings. This family of gels can be quite stiff but can be spread. They are non-sticky and have sufficient strength to be removed by peeling or lifting them from a sensitive surface. These three classes of gels are potentially very important soft materials to augment and improve the range of options available for conserving cultural heritage, and their interesting chemical-physical properties open a rich area for future scientific investigation.
ABSTRACT
The preparation and structural characterization of a family of viscoelastic dispersions of borate cross-linked, 80% hydrolyzed poly(vinyl acetate) (80PVAc) in aqueous-organic liquids are presented. Correlations between mechanical properties (from rheological measurements) and the degree and nature of cross-linking (from (11)B NMR spectroscopy) are reported, and the results are used to assess their potential as low-impact cleaning agents for the surfaces of paintings. Because the dispersions can be prepared at room temperature by simple procedures from readily available materials and can contain up to 50% (w/w) of an organic liquid, they offer important advantages over previously described cleaning agents that are based on fully hydrolyzed PVAc (i.e., poly(vinyl alcohol). The mechanical properties of the various aqueous-organic dispersions, as determined quantitatively by rheological investigations and qualitatively by their ease of removal from a solid surface (i.e., the so-called "peel-off" ability) have been tuned systematically by varying the amount of organic liquid, its structure, and the concentrations of borax and 80PVAc. The (11)B NMR studies demonstrate that the concentration of borate ions actively participating in cross-linking increases significantly with the amount of organic liquid in the mixture. The degree of cross-linking remains constant when the 80PVAc and borax concentrations are varied, as long as their ratios are kept constant. Some of the 80PVAc-borax dispersions have been tested successfully as cleaning agents on the surface of a 16th-17th century oil-on-wood painting by Lodovico Cardi, "Il Cigoli", that was covered by a brown patina and on the surface of a Renaissance wall painting by Vecchietta in Santa Maria della Scala, Siena, Italy, that had a degraded polyacrylate coating from a previous conservation treatment.
ABSTRACT
A gel-like, high-viscosity polymeric dispersion (HVPD) based on cross-linked borate, partially hydrolyzed poly(vinyl acetate) (xPVAc, where x is the percent hydrolysis) is described. Unlike hydro-HVPDs prepared from poly(vinyl alcohol) (PVA) and borate, the liquid portion of these materials can be composed of up to 75% of an organic cosolvent because of the influence of residual acetate groups on the polymer backbone. The effects of the degree of hydrolysis, molecular weight, polymer and cross-linker concentrations, and type and amount of organic cosolvent on the rheological and structural properties of the materials are investigated. The stability of the systems is explored through rheological and melting-range studies. (11)B NMR and small-angle neutron scattering (SANS) are used to probe the structure of the dispersions. The addition of an organic liquid to the xPVAc-borate HVPDs results in a drastic increase in the number of cross-linked borate species as well as the agglomeration of the polymer into bundles. These effects result in an increase in the relaxation time and thermal stability of the networks. The ability to make xPVAc-borate HVPDs with very large amounts of and rather different organic liquids, with very different rheological properties that can be controlled easily, opens new possibilities for applications of PVAc-based dispersions.
ABSTRACT
Gels are becoming one of the most important tools for the conservation of cultural heritage. They are very versatile systems and can be easily adapted to the cleaning and consolidation of works of art. This perspective reviews the major achievements in the field and suggests possible future developments.
ABSTRACT
We report the development of a new type of hydrogel in which a cosolvent has been added to the water component. The gel networks are based on the well-known poly(vinyl alcohol)-borate systems (PVA-borate). However, it is shown that the rheological and solubilizing properties of the hydrogels can be modified drastically by the addition of a cosolvent. The studies have focused on 1-propanol as the added liquid, although it is shown that others (propylene carbonate, 1-pentanol, cyclohexanone, and 2-butanol) are amenable to making modified hydrogels as well. In addition to the rheological measurements, the gels have been investigated by differential scanning calorimetry (free water index) and determination of their solubilizing power. Finally, the gels have been applied to clean and oxidized varnish (patina) from the surface of a XVI-XVII century oil-on-wood painting by Ludovico Cardi detto il Cigoli. The mode of cleaning by and removal of the PVA-borate water/1-propanol gel from the painted surface demonstrate several advantages over other gels used in art conservation.
Subject(s)
Borates/chemistry , Polyvinyl Alcohol/chemistry , Solvents/chemistry , Calorimetry/methods , Calorimetry, Differential Scanning , Culture , Elasticity , Gels , Models, Chemical , Oils , Oscillometry/methods , Solubility , Stress, Mechanical , Viscosity , WoodABSTRACT
When investigated under high concentration conditions, hyaluronan (HA) solutions in physiological saline are shown to generate stable superstructures. An abrupt change in the rheological properties observed on increasing the temperature suggests the breaking of certain cooperative bonds. The thermal disruption of the HA superstructure is accompanied by a sharp transition from a long- to a restricted-connectivity water structuring, which is interpreted as a concurrent transition from a stable to a temporary polymer network. The intermolecular associations are considered to be originated by hydrophobic interactions between the nonpolar groups of the polymer backbones.
Subject(s)
Hyaluronic Acid/chemistry , Calorimetry, Differential Scanning , Carbohydrate Conformation , Carbohydrate Sequence , Molecular Sequence Data , Rheology , Spectroscopy, Fourier Transform InfraredABSTRACT
A dynamic, rheological, and structural characterization of aqueous gel-like systems containing hydroxypropyl guar gum (HPG), borax and glycerol is presented in this paper. The role of glycerol, which is introduced as a plasticizer in the formulation, is investigated by means of 11B NMR and 1H NMR PGSTE measurements in order to clarify its contribution to the gel network formation and its interaction with borax, with whom it forms a complex. The effect of gels components on the rheological behaviour and on the activation energy related to the relaxation process of the system was assessed by means of rheology. The results obtained suggest that the mechanical properties of these gels can be tuned and controlled by modulating the formulation in a wide range of compositions. Moreover, a structural characterisation has been also carried out by means of Small Angle X-ray Scattering (SAXS) to highlight the role of the various components on the mesh size of the network. The structural and mechanical characteristics of these systems suggest their potential use for applicative purposes. In this regard, one of the gel set up has been successfully tested as cleaning agent on the surface of a XIX stucco fragment coming from the La Fenice theatre (Venice, Italy) for the removal of a dirt layer composed by dust and particulated matter originated during a fire in 1996.
Subject(s)
Galactans/chemistry , Gels/chemistry , Mannans/chemistry , Plant Gums/chemistry , Polysaccharides/chemistry , Rheology , Borates/chemistry , Glycerol/chemistry , Magnetic Resonance Spectroscopy , Molecular Structure , Scattering, Small Angle , X-Ray DiffractionABSTRACT
This study investigated occurrence of microplastic particles in digestive tracts of fishes from the Amazon River estuary. A total of 189 fish specimens representing 46 species from 22 families was sampled from bycatch of the shrimp fishery. Microplastic particles removed from fish gastrointestinal tracts were identified using Attenuated Total Reflectance - Fourier Transform Infrared (ATR-FTIR). In total, 228 microplastic particles were removed from gastrointestinal tracts of 26 specimens representing 14 species (30% of those examined). Microplastic particles were categorized as pellets (97.4%), sheets (1.3%), fragments (0.4%) and threads (0.9%), with size ranging from 0.38 to 4.16â¯mm. There was a positive correlation between fish standard length and number of particles found in gastrointestinal tracts. The main polymers identified by ATR-FTIR were polyamide, rayon and polyethylene. These findings provide the first evidence of microplastic contamination of biota from the Amazon estuary and northern coast of Brazil.
Subject(s)
Fishes/metabolism , Plastics/metabolism , Animals , Brazil , Cellulose/analysis , Cellulose/metabolism , Eating , Environmental Monitoring , Estuaries , Fishes/classification , Gastrointestinal Tract/chemistry , Gastrointestinal Tract/metabolism , Pandalidae/chemistry , Pandalidae/classification , Pandalidae/metabolism , Plastics/analysis , Polyethylene/analysis , Polyethylene/metabolism , Rivers/chemistry , Seafood/analysis , Water Pollutants, Chemical/analysisABSTRACT
The effect of propylene carbonate on SDS micelles was investigated by means of pulsed gradient spin-echo (PGSE) NMR, small-angle X-ray scattering (SAXS), conductivity and ion-selective electrode (ISE) measurements. The knowledge of the cosolvent partition between continuous phase and micelles (obtained by means of PGSE-NMR) allowed the identification of relevant dilution paths. Along these paths the system is composed of identical micelles that become more and more diluted. The extrapolation of measured self-diffusion coefficient to infinite dilution (where direct and hydrodynamic interactions are negligible) permits the determination of hydrodynamic size of the micelles. Moreover, the micelle ionization degree (measured by means of ISE) combined with PGSE-NMR and conductivity data furnishes an estimate of the aggregation number without any assumptions on micellar shape. On the other hand, troublesome hydrodynamic interactions are irrelevant to SAXS, and scattering data collected at fixed composition can be analyzed according to a reasonable model by exploiting the insight on the propylene carbonate partition gained through PGSE-NMR. By means of these approaches, we have found that propylene carbonate acts mainly as cosurfactant for the SDS micelles, decreasing their size and aggregation number by increasing the mean headgroup area of SDS.
Subject(s)
Micelles , Propane/analogs & derivatives , Sodium Dodecyl Sulfate/chemistry , Solvents/chemistry , Ultrasonics , X-Rays , Indicator Dilution Techniques , Magnetic Resonance Spectroscopy , Propane/chemistryABSTRACT
Water has been investigated for a long time as the most important solvent; the peculiar behavior of water as solute has been studied in binary mixtures with organic solvents, mainly exploring the whole phase diagram. In this Article, we studied the behavior of water in binary mixtures with propylene carbonate in the phase diagram region where water acts as a solute as a function of the water molar fraction X(water). Surface tension measurements, differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR) have been used to investigate the state of water molecules and hydrogen bonds when water is to be considered a solute instead of a solvent, and peculiar and interesting properties were discovered. The interaction of water molecules among themselves and between water and propylene carbonate has been shown to be dependent on the water concentration in the mixtures. All of the measured properties showed a break at X(water) approximately 0.15-0.20 similar to the break due to the critical micellar concentration in surfactant solutions. In particular, from the FTIR spectra, it was possible to deduce that at this concentration water has a transition from pure solute ("multimers" solvated by PC) to cosolvent ("intermediate" and "network" water).
ABSTRACT
Calcium sulphate dihydrate nanocrystals of 25-100 nm width have been synthesized in 100% purity and yield by means of a method--the cryo-vacuum process--consisting of rapid freezing of quasi-saturated solutions and subsequent vacuum assisted sublimation of water. Transmission electron microscopy reveals both curled nano-lamellae and smaller, irregular particles; electron diffraction patterns demonstrated that the particles are crystalline. This is a very powerful method for the 'clean' synthesis of moderately and completely water-soluble inorganic materials.