ABSTRACT
A mechanism for carbon deposition and its impact on the reaction kinetics of Methane Dry Reforming (MDR) using Rhodium-based catalysts is presented. By integrating Raman spectroscopy with kinetic analysis in an operando-annular chemical reactor under strict chemical conditions, we discovered that carbon deposition on a Rh/α-Al2O3 catalyst follows a nucleation-growth mechanism. The dynamics of carbon aggregates at the surface is found to be ruled by the CO2/CH4 ratio and the inlet CH4 concentration. The findings elucidate the spatiotemporal development of carbon aggregates on the catalyst surface and their effects on catalytic performance. Furthermore, the proposed mechanism for carbon formation shows that the influence of CO2 on MDR kinetics is an indirect result of carbon accumulation over time frames exceeding the turnover frequency, thus reconciling conflicting reports in the literature regarding CO2's kinetic role in MDR.
ABSTRACT
Metal-organic frameworks (MOFs) are a class of porous crystalline materials showing great potential for applications such as catalysis, gas storage, molecular separations, energy storage and drug delivery. The properties that render them interesting stem from their structure (e.g. morphology, porosity or metal coordination and geometry). Thus, gaining a deeper understanding strongly relies on the availability and adequate use of advanced characterization tools, which can interrogate MOFs under realistic synthesis as well as catalysis (or sorption) conditions. Herein, we present an overview of the various characterization techniques specifically suitable for the study on the underlying chemistry of the formation mechanisms and adsorption properties of three archetypal MOFs, namely MIL-100, ZIF-8 and HKUST-1. A section on using MOFs as supports for metal atoms or complexes that can be used for catalysis on the robust Zr6 nodes of UiO-66 or NU-1000, and the characterization techniques used thereof, is presented as well. In addition, we discuss recent developments on the application of nano-spectroscopic characterization for MOF thin-films and explore the potential of MOFs as model systems in catalysis. The conclusions and outlook provide future research possibilities in the field of MOF characterization.
ABSTRACT
Despite technological advancements, probing gas-solid interfaces at the nanoscale is still a formidable challenge. New nano-spectroscopic methods are needed to understand the guest-host interactions of functional materials during gas sorption, separation, and conversion. Herein, we introduce in situ Photoinduced Force Microscopy (PiFM) to evidence site-specific interaction between Metal-Organic Frameworks (MOFs) and water. To this end, we developed amphiphilic Surface-anchored MOF (SURMOF) model systems using self-assembly for the side-by-side hetero-growth of nanodomains of hydrophilic HKUST-1 and hydrophobic ZIF-8. PiFM was used to probe local uptake kinetics and to show D2 O sorption isotherms on (defective) HKUST-1 paddlewheels. By monitoring defect vibrations, we visualized in real-time the saturation of existing defects and the creation of D2 O-induced defects. This work shows the potential of in situ PiFM to unravel gas sorption mechanisms and map active sites on functional (MOF) materials.
ABSTRACT
Metal-organic frameworks (MOFs) are a promising class of materials for many applications, due to their high chemical tunability and superb porosity. By growing MOFs as (thin-)films, additional properties and potential applications become available. Here, copper (II) 1,3,5-benzenetricarboxylate (Cu-BTC) metal-organic framework (MOF) thin-films are reported, which were synthesized by spin-coating, resulting in "nanowebs", that is, fiber-like structures. These surface-mounted MOFs (SURMOFs) were studied by using photoinduced force microscopy (PiFM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The optimal concentration of precursors (10â mm) was determined that resulted in chemically homogeneous, pure nanowebs. Furthermore, the morphology and (un)coordinated Cu sites in the web were tuned by varying the rotation speed of the spin-coating process. X-ray diffraction (XRD) analysis showed that rotation speeds ≥2000â rpm (with precursors in a water/ethanol solution) generate the catena-triaqua-µ-(1,3,5-benzenetricarboxylate)-copper(II), or Cu(BTC)(H2 O)3 coordination polymer. X-ray photoelectron spectroscopy (XPS) highlighted the strong decrease in number of (defective) Cu+ sites, as the nanowebs mainly consist of coordinated Cu2+ Lewis acid sites (LAS) and organic linker-linker, for example, hydrogen-bonding, interactions. Finally, the Lewis-acidic character of the Cu sites is illustrated by testing the films as catalysts in the isomerization of α-pinene oxide. The higher number of LAS (≥3000â rpm), result in higher campholenic aldehyde selectivity reaching up to 87.7 %. Furthermore, the strength of a combined micro- and spectroscopic approach in understanding the nature of MOF thin-films in a spatially resolved manner is highlighted.
ABSTRACT
Control over assembly, orientation, and defect-free growth of metal-organic framework (MOF) films is crucial for their future applications. A layer-by-layer approach is considered a suitable method to synthesize highly oriented films of numerous MOF topologies, but the initial stages of the film growth remain poorly understood. Here we use a combination of infrared (IR) reflection absorption spectroscopy and atomic force microscopy (AFM)-IR imaging to investigate the assembly and growth of a surface mounted MOF (SURMOF) film, specifically HKUST-1. IR spectra of the films were measured with monolayer sensitivity and <10â nm spatial resolution. In contrast to the common knowledge of LbL SURMOF synthesis, we find evidence for the surface-hindered growth and large presence of copper acetate precursor species in the produced MOF thin-films. The growth proceeds via a solution-mediated mechanism where the presence of weakly adsorbed copper acetate species leads to the formation of crystalline agglomerates with a size that largely exceeds theoretical growth limits. We report the spectroscopic characterization of physisorbed copper acetate surface species and find evidence for the large presence of unexchanged and mixed copper-paddle-wheels. Based on these insights, we were able to optimize and automatize synthesis methods and produce (100) oriented HKUST-1 thin-films with significantly shorter synthesis times, and additionally use copper nitrate as an effective synthesis precursor.
ABSTRACT
Bridging the gap in studying surface reactions, processes, and morphology and measuring at (catalytic) relevant conditions is crucial for our understanding of the working principles of porous crystalline materials. Scanning tunneling microscopy is limited because of the required conductivity of the sample, whereas atomic force microscopy (AFM) is often challenging in use owing to the physical mechanism underlying the technique. Herein, we report a tailor-made autoclave-inserted AFM, able to measure at â¼20â bar and â¼110 °C. First, we show the ability to obtain nanometer resolution on well-defined test samples at before-mentioned conditions. Second, to demonstrate the possibilities of analyzing morphological evolutions at elevated temperatures and pressures, we use this setup to measure the stability of a surface-anchored metal-organic framework (SURMOF) in-situ at pressures of 1-20â bar in the temperature range between 20 and 60 °C. It was found that the showcase HKUST-1 material has a good physical stability, as it is hardly damaged from exposure to pressures up to 20â bar. However, its thermal stability is weaker, as exposure to elevated T damaged the material by influencing the interaction between organic linker and metal cluster. In-situ measurements at elevated T also showed an increased mobility of the material when working at such conditions. Combining the strength of AFM at elevated T and p with ex-situ AFM and spectroscopic measurements on this MOF showcases an example of how porous materials can be studied at (industrially) relevant conditions using the autoclave-inserted AFM.
ABSTRACT
Many catalytic processes depend on the sorption and conversion of gaseous molecules on the surface of (porous) functional materials. These events often preferentially occur on specific, undercoordinated, external surface sites. Here we show the combination of in situ Photo-induced Force Microscopy (PiFM) with Density Functional Theory (DFT) calculations to study the site-specific sorption and conversion of formaldehyde on the external surfaces of well-defined faceted ZIF-8 microcrystals with nanoscale resolution. We observed preferential adsorption of formaldehyde on high index planes. Moreover, in situ PiFM allowed us to visualize unsaturated nanodomains within extended external crystal planes, showing enhanced sorption behavior on the nanoscale. Additionally, on defective ZIF-8 crystals, structure sensitive conversion of formaldehyde through a methoxy- and a formate mechanism mediated by Lewis acidity was found. Strikingly, sorption and conversion were influenced more by the external surface termination than by the concentration of defects. DFT calculations showed that this is due to the presence of specific atomic arrangements on high-index crystal surfaces. With this research, we showcase the high potential of in situ PiFM for structure sensitivity studies on porous functional materials.
ABSTRACT
Microporous polymer frameworks have attracted considerable attention to make novel separation layers owing to their highly porous structure, high permeability, and excellent molecular separation. This study concerns the fabrication and properties of thin melamine-based microporous polymer networks with a layer thickness of around 400â nm, supported on an α-alumina support and their potential use in organic solvent nanofiltration. The modified membranes show excellent solvent purification performances, such as n-heptane permeability as high as 9.2â L m-2 h-1 bar -1 in combination with a very high rejection of approximately 99 % for organic dyes with molecular weight of ≥457â Da. These values are higher than for the majority of the state-of-the-art membranes. The membranes further exhibit outstanding long-term operation stability. This work significantly expands the possibilities of using ceramic membranes in organic solvent nanofiltration.
ABSTRACT
Metal-organic framework (MOF) thin films show unmatched promise as smart membranes and photocatalytic coatings. However, their nucleation and growth resulting from intricate molecular assembly processes are not well understood yet are crucial to control the thin film properties. Here, we directly observe the nucleation and growth behavior of HKUST-1 thin films by real-time in situ AFM at different temperatures in a Cu-BTC solution. In combination with ex situ infrared (nano)spectroscopy, synthesis at 25 °C reveals initial nucleation of rapidly growing HKUST-1 islands surrounded by a continuously nucleating but slowly growing HKUST-1 carpet. Monitoring at 13 and 50 °C shows the strong impact of temperature on thin film formation, resulting in (partial) nucleation and growth inhibition. The nucleation and growth mechanisms as well as their kinetics provide insights to aid in future rational design of MOF thin films.
ABSTRACT
Characterizing the structures of zeolites and their catalytic performance with high-spatial-resolution is vital to developing new solid catalysts. We demonstrate the application of photoinduced force microscopy (PiFM), with nanometer scale resolution across the infrared spectral range, for the study of zeolite ZSM-5 thin-films with various Si/Al ratios after the methanol-to-hydrocarbons reaction. This first-of-its kind nanometer scale infrared imaging of zeolite materials demonstrates the possibility of PiFM for the study of functional porous materials.